No connection during sending efax

no connection when trying to send a fax from the 7510 through effects products

Hi singsrn,
Welcome to the HP Support forums. I understand that you are unable to send eFaxes with your Photosmart 7510.
Have you tried sending again this morning? I understand from HP's Cloud Services department that you should be able to send again after an update was put into place.
If you are still having issues sending eFaxes please contact HP's Cloud Services at 1-855-785-2777 if you live in the USA/Canada region. If you live outside the USA/Canada region please click here to find the Technical Support number for your country/region.
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

Similar Messages

HTTP response code 500 : Error during Sender Agreement Determination

I am trying a simple file to file scenario and messages are not being received in Integration Server.
Through communication channel monitoring, i have received the below error message.
Error Transmitting the message to
endpoint http://<hostname>:50000/sap/xi/engine?type=entry using
connection File_http://sap.com/xi/XI/System failed, due
to:
com.sap.engine.interfaces.messaging.api.exception.MessagingException:
Received HTTP response code 500 : Error during Sender
Agreement Determination.
Can you please help
Regards
Harish

Hi Harish,
http://<hostname>:50000/sap/xi/engine?type=entry
it should be http://<hostname>:8000/sap/xi/engine?type=entry not 50000 as port It should be your HTTP port...please .make the changes !!
In SXMB_ADM transaction under Integration engine configuration please change the settings to http://<hostname>:8000/sap/xi/engine?type=entry
make sure with your basis team that ur http port is 8000 or 8001 ..as per that make the necessary changes..
Regards,

Netscape Directory Server closes LDAPS connection during SSL handshake

I'm trying to bind to a NDS 6.2 LDAP server over SSL using the 1.4.2_03 JNDI LDAP provider,
but I can't get past the initial TSL handshake: it throws a "Remote host closed connection
during handshake" exception. The JSSE FAQ mentions this as likely a problem with
protocol incompatibilities (e.g. SSL3 vs. TLS1), but I can't seem to force the LDAP provider
to use an older protocol to investigate this further.
Here are the environment parameters I'm passing
java.naming.provider.url=ldap://ldaphost:636/o=foo,ou=bar
java.naming.security.principal=cn=foobar
java.naming.security.credentials=password
java.naming.factory.initial=com.sun.jndi.ldap.LdapCtxFactory
java.naming.security.authentication=simple
java.naming.security.protocol=ssland the associated JSSE debug trace follows.
Any ideas? Do I need to create some custom socket factory to mess with protocols?
pch
================
keyStore is :
keyStore type is : jks
init keystore
init keymanager of type SunX509
trustStore is: C:\tools\jdk1.4.2\jre\lib\security\jssecacerts
trustStore type is : jks
init truststore
adding as trusted cert:
Subject: [email protected], CN=Petes Bait and Tackle Class Z CA, O=Petes Bait and Tackle, L=Falls Church, ST=Virginia, C=US
Issuer: [email protected], CN=Petes Bait and Tackle Class Z CA, O=Petes Bait and Tackle, L=Falls Church, ST=Virginia, C=US
Algorithm: RSA; Serial number: 0x0
Valid from Thu Jun 24 13:24:27 EDT 2004 until Fri Jun 24 13:24:27 EDT 2005
init context
trigger seeding of SecureRandom
done seeding SecureRandom
%% No cached client session
*** ClientHello, TLSv1
RandomCookie: GMT: 1071325469 bytes = { 1, 25, 191, 168, 187, 165, 118, 46, 45, 64, 183, 165, 131, 120, 155, 107, 208, 170, 19, 80, 74, 234, 177, 118, 51, 83, 194, 158 }
Session ID: {}
Cipher Suites: [SSL_RSA_WITH_RC4_128_MD5, SSL_RSA_WITH_RC4_128_SHA, TLS_RSA_WITH_AES_128_CBC_SHA, TLS_DHE_RSA_WITH_AES_128_CBC_SHA, TLS_DHE_DSS_WITH_AES_128_CBC_SHA, SSL_RSA_WITH_3DES_EDE_CBC_SHA, SSL_DHE_RSA_WITH_3DES_EDE_CBC_SHA, SSL_DHE_DSS_WITH_3DES_EDE_CBC_SHA, SSL_RSA_WITH_DES_CBC_SHA, SSL_DHE_RSA_WITH_DES_CBC_SHA, SSL_DHE_DSS_WITH_DES_CBC_SHA, SSL_RSA_EXPORT_WITH_RC4_40_MD5, SSL_RSA_EXPORT_WITH_DES40_CBC_SHA, SSL_DHE_RSA_EXPORT_WITH_DES40_CBC_SHA, SSL_DHE_DSS_EXPORT_WITH_DES40_CBC_SHA]
Compression Methods: { 0 }
[write] MD5 and SHA1 hashes: len = 73
0000: 01 00 00 45 03 01 40 DB   21 1D 01 19 BF A8 BB A5 ...E..@.!.......
0010: 76 2E 2D 40 B7 A5 83 78   9B 6B D0 AA 13 50 4A EA [email protected].
0020: B1 76 33 53 C2 9E 00 00   1E 00 04 00 05 00 2F 00 .v3S........../.
0030: 33 00 32 00 0A 00 16 00   13 00 09 00 15 00 12 00 3.2.............
0040: 03 00 08 00 14 00 11 01   00                       .........
main, WRITE: TLSv1 Handshake, length = 73
[write] MD5 and SHA1 hashes: len = 98
0000: 01 03 01 00 39 00 00 00   20 00 00 04 01 00 80 00 ....9... .......
0010: 00 05 00 00 2F 00 00 33   00 00 32 00 00 0A 07 00 ..../..3..2.....
0020: C0 00 00 16 00 00 13 00   00 09 06 00 40 00 00 15 ............@...
0030: 00 00 12 00 00 03 02 00   80 00 00 08 00 00 14 00 ................
0040: 00 11 40 DB 21 1D 01 19   BF A8 BB A5 76 2E 2D 40 ..@.!.......v.-@
0050: B7 A5 83 78 9B 6B D0 AA   13 50 4A EA B1 76 33 53 ...x.k...PJ..v3S
0060: C2 9E                                              ..
main, WRITE: SSLv2 client hello message, length = 98
main, received EOFException: error
main, handling exception: javax.net.ssl.SSLHandshakeException: Remote host closed connection during handshake
main, SEND TLSv1 ALERT: fatal, description = handshake_failure
main, WRITE: TLSv1 Alert, length = 2
main, called closeSocket()

My first suggestion is to find an log on de NDS server (maybe it states a reason for the closing the connection)
Otherwise use Ethereal to examen the trafic between the to machines. Maybe that helps.
Or check if the NDS wants 2-way authentication and is trying to get your certificate as wel.

Can no longer send efaxes

I can no longer send efaxes. Says I am not connected to a network (which I am). I still receive efaxes. I have a hp envy 110.

Hello @DB13,
Welcome to the HP forums.
I am sorry to hear about the eFax feature on your Envy 110 displaying that error message.
The following post by PrintApper addresses this issue.
eFax users - please read
HP and J2 are working together to get this issue resolved.
They should also be able to provide you with a workaround until this issue is resolved.
I recommend calling HP's Cloud Services department and inquire about the workaround.
Please call our Cloud Services at 855-785-2777.
If you live outside the US/Canada Region, please click the link below to get the support number for your region. http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
Noth American hours of opperations:
Mon-Fri. 8am - 11pm, Sat. 9am-8pm - EST
Mon-Fri. 7am - 10pm, Sat. 8am-7pm - CST
Mon-Fri. 6am - 9pm, Sat. 7am-6pm - MST
Mon-Fri. 5am - 8pm, Sat. 6am-5pm - PST
Aardvark1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!

Error 324 (net::ERR_EMPTY_RESPONSE): The server closed the connection without sending any data.

Hi,
I am using APEX version 4.2.1.00.08 with Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
I've developed an application, that was working fine till 3 days ago...
At the moment, I can log into the application but when I enter my ID/PW it takes me to my 1st page but then it runs for a mint or so (trying to load charts) and then generates following error message
No data received
Unable to load the webpage because the server sent no data.
Here are some suggestions:
Reload this webpage later.
Error 324 (net::ERR_EMPTY_RESPONSE): The server closed the connection without sending any data.
interestingly, I haven't changed anything within the application
I've tried it with Chrome Version 27.0.1453.116 m and IE 8.0...
with IE 8.0, it shows I/O Error in place of my graphs and get's a pop up message that displays "Error - error unknown"
The only thing that I can recall doing differently is logging via remote desktop connection, but I've used remote desktop in the past as well and it worked.
Please advice

anyone...?

No Objects Found error during Sender agreement in ID

I created all objects, activated in IR and refreshed Cache with SXI_Cache.
Created Scenario in ID.
During Sender agreement creation, I gave Sender Service ( Which doesn't have to be in SLD ). Then Iam trying to pick Interface from drop down. Surprisinglt I cant see any object instead it throws error "No Objects Found" .
What should I do to see the Interfaces from Design?. Any suggestion here ?
Iam doing File to File scenario with Business Service.
Thanks

S T,
from what you've said, you're using Business Services and not Business Systems.
Business Services are simpler (in the sense that you don't need to refer them in SLD and all), but the catch is that they don't have some useful stuff that Business Systems have.
One of these is that, for Business Systems, all the interfaces that are in SWCVs which belong to that BSy are automatically considered as valid interfaces for that BSy.
As for Business Services, you have to define all the interfaces that you want in the BSe, one by one. The good news is that you can use the Message Interfaces of any SWCV of Integration Repository, without having to specifically add the SWCV to the BSe (which can be a pain in the @$$ some times...).
To see and/or include message interfaces for a Business Service, just double click on it on Scenario or Objects tabs of Integration Directory.
Regards,
Henrique.

Error during sending sales idoc

hi all,
i m getting error during sending idoc for sales.................
Error:Check value field assignment for Condition PN10.....
How to solve this...?
Regards,
Imran

friends.......argent.......

HT4569 In case of lost internet connection during mountain lion download from app store, do i have to start over?

In case of lost internet connection during mountain lion download from app store, do i have to start over?

How do I speed this up. I have a fast internet connection but this is obviously not right.
The speed of the downlaod is dependant on the speed of your Internet connection. "I have a fast Internet connection...," doesn't actually mean anything unless you provide some numbers.
I have a cable Internet connection with 32 Mbps download speeds, but if you have DSL, you would probably be limited to 1.5 Mbps. Some would call both of these connections "fast," but obviously one is faster than the other.
What is the speed of your Internet connection?? Don't say, "fast."
Test it here: http://www.dslreports.com/speedtest?flash=1

I have an iMac (Mid 2010) and am running 0sx 10.8.5 and the WiFi always loses connection during sleep mode. I have seen numerous different solutions none of which seem to work. Can anyone help?

I have an iMac (Mid 2010) and am running 0sx 10.8.5 and the WiFi always loses connection during sleep mode. I have seen numerous different solutions none of which seem to work. Can anyone help?

Test after taking each of the following steps that you haven't already tried. Back up all data before making any changes.
1. Make sure the network is on the preferred list by following these instructions. It's important to read the article carefully, as it's the starting point for any further efforts to solve the problem. If you skip any of the steps, the problem may not be solved. Make sure the box marked
          Remember networks this computer has joined
is checked.
2. Follow the instructions in this support article under the heading
          Symptom: After restarting or waking from sleep, my computer might not connect to the Internet
3. Reset the PRAM.
4. Make a note of all your settings for Wi-Fi in the Network preference pane, then delete the connection from the connection list and recreate it with the same settings. You do this by clicking the plus-sign icon below the connection list, and selecting Wi-Fi as the interface in the sheet that opens. Select Join other network from the Network Name menu, then select your network. Enter the password when prompted and save it in the keychain.
5. From the Location menu at the top of the Network preference pane, select Edit Locations. A sheet will drop down. Click the plus-sign button to create a new location. Give it any name you want. In the new location, set up the Wi-Fi service with the same settings you used before. Click Apply and test.
6. Launch the Keychain Access application. Search for and delete all AirPort network password items that refer to the network. Make a note of the password first.
7. Repair permissions on the startup volume.
8. Turn off Bluetooth and test.
9. Reset the System Management Controller.
10. This step shouldn't be necessary, but has been advised by Apple Support in some cases, apparently as a workaround for a bug. Open the Energy Saver pane in System Preferences. If applicable, click the padlock icon in the lower left corner to unlock the settings. Enter your administrator login password when prompted.
Select the Power Adapter tab and uncheck the boxes marked
          Wake for Wi-Fi network access
and
          Enable Power Nap...
if present. Then, if the computer is a MacBook, select the Battery tab and uncheck
          Enable Power Nap...
11. Reinstall OS X.

Network Adapter could not establish connection during installation

Hi,
I'm trying to install html db v10.2.0.1 and http server on the Fedora Core 4 platform and am getting a "Network Adapter could not establish connection during installation" error. This occurs after pressing Next at on the Specify HTML DB Database Details dialog box. Note that I'm not new to oracle databases or html db. I can't seem to find a similar thread on this forum related to the html db v2 install and I've read the FAQ related to the installation, making sure that I unset the TNS_ADMIN and ORACLE_HOME environment variables before launching the installer. I also checked that I can connect to the database via the listener, sqlplus sys@database as sysdba. I checked the listener status:
[oracle@hinault ~]$ lsnrctl status
LSNRCTL for Linux: Version 10.2.0.1.0 - Production on 18-AUG-2005 12:03:23
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for Linux: Version 10.2.0.1.0 - Production
Start Date 18-AUG-2005 08:11:25
Uptime 0 days 3 hr. 51 min. 58 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Log File /u01/app/oracle/product/10.2.0/network/log/listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=hinault.com)(PORT=1521)))
Services Summary...
Service "tibbetts" has 1 instance(s).
Instance "tibbetts", status READY, has 1 handler(s) for this service...
Service "tibbettsXDB" has 1 instance(s).
Instance "tibbetts", status READY, has 1 handler(s) for this service...
Service "tibbetts_XPT" has 1 instance(s).
Instance "tibbetts", status READY, has 1 handler(s) for this service...
The command completed successfully
I also checked the installation log files. Here's the contents of the end of the file:
schemaName = sys
schemaPassword = Protected value, not to be logged
connectString = //hinault.com:1521/tibbetts
userName = FLOWS_010600
INFO: Query Returned: ERROR:Exception occured while connecting to database. Please check the connection details of the database you specified and retry.
Io exception: The Network Adapter could not establish the connection
SEVERE: The installer has encountered the following error while trying to connect to the target database:
ERROR:Exception occured while connecting to database. Please check the connection details of the database you specified and retry.
Io exception: The Network Adapter could not establish the connection
INFO: User Selected: Yes/OK
I also checked the listener log and it looks normal. I checked that I entered the correct values in the Specify HTML DB Database Details dialog box, hostname, port and service name.

[root@hinault sbin]# ifconfig -a
eth0 Link encap:Ethernet HWaddr 00:12:3F:DF:23:BF
inet addr:10.100.41.136 Bcast:10.100.41.255 Mask:255.255.255.0
inet6 addr: fe80::212:3fff:fedf:23bf/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:72238 errors:0 dropped:0 overruns:0 frame:0
TX packets:44289 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:19151698 (18.2 MiB) TX bytes:4351417 (4.1 MiB)
Interrupt:9
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:6838 errors:0 dropped:0 overruns:0 frame:0
TX packets:6838 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:3168107 (3.0 MiB) TX bytes:3168107 (3.0 MiB)
sit0 Link encap:IPv6-in-IPv4
NOARP MTU:1480 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)

My magic mouse loses connection during sleep

My Magic mouse loses connection during sleep mode. I also get error message my external usb storage drive was disconnected improperly. I have to unplug and plug in drive generally, sometimes it is still present. For the mouse I generally turn it off and on and allow it to be found again.

This is a late 2009 imac.

SMTP server terminates connection before sending QUIT command

We have written a simple (standard .net tcp async logic) SMTP listener which listens on 25 port for incoming connections from other SMTP servers.
It process all mandatory commands like FROM, RCPT TO, etc.
With some servers it works well but, some SMTP servers (like Microsoft outlook) terminates connection before sending QUIT command and then re-send the same emails again and again.
Anything we have missed?
Assembler (.../z80/x86/x64...) the best language I've ever known

Here is another communication list without RESET from our side but with from remote side:
20440 1:49:24 PM 2/11/2014 848.8506105 RapidVerifier.vshost.exe JSD00001 207.46.163.153 SMTP SMTP:Rsp 220 localhost -- Fake proxy server, 36 bytes {TCP:1598, IPv4:1597}
20445 1:49:24 PM 2/11/2014 849.0055034 RapidVerifier.vshost.exe 207.46.163.153 JSD00001 SMTP SMTP:Cmd EHLO na01-bn1-obe.outbound.protection.outlook.com, 51 bytes {TCP:1598, IPv4:1597}
20448 1:49:24 PM 2/11/2014 849.0532736 RapidVerifier.vshost.exe JSD00001 207.46.163.153 SMTP SMTP:Rsp 250 -localhost Hellow [na01-bn1-obe.outbound.protection.outlook.com], 150 bytes {TCP:1598, IPv4:1597}
20458 1:49:25 PM 2/11/2014 849.2256168 RapidVerifier.vshost.exe 207.46.163.153 JSD00001 SMTP SMTP:Cmd MAIL FROM:<> SIZE=30344 AUTH=<>, 33 bytes {TCP:1598, IPv4:1597}
20459 1:49:25 PM 2/11/2014 849.2536742 RapidVerifier.vshost.exe JSD00001 207.46.163.153 SMTP SMTP:Rsp 250 OK, 8 bytes {TCP:1598, IPv4:1597}
20462 1:49:25 PM 2/11/2014 849.4253092 RapidVerifier.vshost.exe 207.46.163.153 JSD00001 SMTP SMTP:Cmd RCPT TO:<[email protected]>, 30 bytes {TCP:1598, IPv4:1597}
20463 1:49:25 PM 2/11/2014 849.4546394 RapidVerifier.vshost.exe JSD00001 207.46.163.153 SMTP SMTP:Rsp 250 OK, 8 bytes {TCP:1598, IPv4:1597}
20468 1:49:25 PM 2/11/2014 849.6286741 RapidVerifier.vshost.exe 207.46.163.153 JSD00001 SMTP SMTP:Cmd DATA, Begins message composition {TCP:1598, IPv4:1597}
20469 1:49:25 PM 2/11/2014 849.6566733 RapidVerifier.vshost.exe JSD00001 207.46.163.153 SMTP SMTP:Rsp 354 Start mail input; end with, 35 bytes {TCP:1598, IPv4:1597}
20474 1:49:25 PM 2/11/2014 849.8290673 RapidVerifier.vshost.exe 207.46.163.153 JSD00001 MIME MIME:Version = 1.0, multipart/report {TCP:1598, IPv4:1597}
20475 1:49:25 PM 2/11/2014 849.8299205 RapidVerifier.vshost.exe 207.46.163.153 JSD00001 TCP TCP:[Continuation to #20474]Flags=...A...., SrcPort=30267, DstPort=SMTP(25), PayloadLen=1460, Seq=1931559218 - 1931560678, Ack=2682120604,
Win=255 (scale factor 0x8) = 65280 {TCP:1598, IPv4:1597}
20476 1:49:25 PM 2/11/2014 849.8299874 RapidVerifier.vshost.exe JSD00001 207.46.163.153 TCP TCP:Flags=...A...., SrcPort=SMTP(25), DstPort=30267, PayloadLen=0, Seq=2682120604, Ack=1931560678, Win=256 (scale factor 0x8) = 65536 {TCP:1598,
IPv4:1597}
20481 1:49:25 PM 2/11/2014 849.9852907 RapidVerifier.vshost.exe 207.46.163.153 JSD00001 TCP TCP:[Continuation to #20474]Flags=...A...., SrcPort=30267, DstPort=SMTP(25), PayloadLen=1460, Seq=1931560678 - 1931562138, Ack=2682120604,
Win=255 (scale factor 0x8) = 65280 {TCP:1598, IPv4:1597}
20482 1:49:25 PM 2/11/2014 849.9861282 RapidVerifier.vshost.exe 207.46.163.153 JSD00001 TCP TCP:[Continuation to #20474]Flags=...A...., SrcPort=30267, DstPort=SMTP(25), PayloadLen=1460, Seq=1931562138 - 1931563598, Ack=2682120604,
Win=255 (scale factor 0x8) = 65280 {TCP:1598, IPv4:1597}
20483 1:49:25 PM 2/11/2014 849.9861282 RapidVerifier.vshost.exe 207.46.163.153 JSD00001 TCP TCP:[Continuation to #20474]Flags=...A...., SrcPort=30267, DstPort=SMTP(25), PayloadLen=1460, Seq=1931563598 - 1931565058, Ack=2682120604,
Win=255 (scale factor 0x8) = 65280 {TCP:1598, IPv4:1597}
20484 1:49:25 PM 2/11/2014 849.9861282 RapidVerifier.vshost.exe 207.46.163.153 JSD00001 TCP TCP:[Continuation to #20474]Flags=...A...., SrcPort=30267, DstPort=SMTP(25), PayloadLen=1460, Seq=1931565058 - 1931566518, Ack=2682120604,
Win=255 (scale factor 0x8) = 65280 {TCP:1598, IPv4:1597}
20485 1:49:25 PM 2/11/2014 849.9862533 RapidVerifier.vshost.exe JSD00001 207.46.163.153 TCP TCP:Flags=...A...., SrcPort=SMTP(25), DstPort=30267, PayloadLen=0, Seq=2682120604, Ack=1931566518, Win=256 (scale factor 0x8) = 65536 {TCP:1598,
IPv4:1597}
20488 1:49:26 PM 2/11/2014 850.1411652 RapidVerifier.vshost.exe 207.46.163.153 JSD00001 TCP TCP:[Continuation to #20474]Flags=...A...., SrcPort=30267, DstPort=SMTP(25), PayloadLen=1460, Seq=1931566518 - 1931567978, Ack=2682120604,
Win=255 (scale factor 0x8) = 65280 {TCP:1598, IPv4:1597}
20489 1:49:26 PM 2/11/2014 850.1420007 RapidVerifier.vshost.exe 207.46.163.153 JSD00001 TCP TCP:[Continuation to #20474]Flags=...A...., SrcPort=30267, DstPort=SMTP(25), PayloadLen=1460, Seq=1931567978 - 1931569438, Ack=2682120604,
Win=255 (scale factor 0x8) = 65280 {TCP:1598, IPv4:1597}
20490 1:49:26 PM 2/11/2014 850.1420007 RapidVerifier.vshost.exe 207.46.163.153 JSD00001 TCP TCP:[Continuation to #20474]Flags=...A...., SrcPort=30267, DstPort=SMTP(25), PayloadLen=1460, Seq=1931569438 - 1931570898, Ack=2682120604,
Win=255 (scale factor 0x8) = 65280 {TCP:1598, IPv4:1597}
20491 1:49:26 PM 2/11/2014 850.1420007 RapidVerifier.vshost.exe 207.46.163.153 JSD00001 TCP TCP:[Continuation to #20474]Flags=...A...., SrcPort=30267, DstPort=SMTP(25), PayloadLen=1460, Seq=1931570898 - 1931572358, Ack=2682120604,
Win=255 (scale factor 0x8) = 65280 {TCP:1598, IPv4:1597}
20492 1:49:26 PM 2/11/2014 850.1420007 RapidVerifier.vshost.exe 207.46.163.153 JSD00001 TCP TCP:[Continuation to #20474]Flags=...A...., SrcPort=30267, DstPort=SMTP(25), PayloadLen=1460, Seq=1931572358 - 1931573818, Ack=2682120604,
Win=255 (scale factor 0x8) = 65280 {TCP:1598, IPv4:1597}
20493 1:49:26 PM 2/11/2014 850.1420007 RapidVerifier.vshost.exe 207.46.163.153 JSD00001 TCP TCP:[Continuation to #20474]Flags=...A...., SrcPort=30267, DstPort=SMTP(25), PayloadLen=1460, Seq=1931573818 - 1931575278, Ack=2682120604,
Win=255 (scale factor 0x8) = 65280 {TCP:1598, IPv4:1597}
20494 1:49:26 PM 2/11/2014 850.1420007 RapidVerifier.vshost.exe 207.46.163.153 JSD00001 TCP TCP:[Continuation to #20474]Flags=...AP..., SrcPort=30267, DstPort=SMTP(25), PayloadLen=196, Seq=1931575278 - 1931575474, Ack=2682120604,
Win=255 (scale factor 0x8) = 65280 {TCP:1598, IPv4:1597}
20495 1:49:26 PM 2/11/2014 850.1421802 RapidVerifier.vshost.exe JSD00001 207.46.163.153 TCP TCP:Flags=...A...., SrcPort=SMTP(25), DstPort=30267, PayloadLen=0, Seq=2682120604, Ack=1931575474, Win=255 (scale factor 0x8) = 65280 {TCP:1598,
IPv4:1597}
20499 1:49:26 PM 2/11/2014 850.2969751 RapidVerifier.vshost.exe 207.46.163.153 JSD00001 TCP TCP:Flags=...A.R.., SrcPort=30267, DstPort=SMTP(25), PayloadLen=0, Seq=1931575474, Ack=2682120604, Win=0 (scale factor 0x8) = 0 {TCP:1598,
IPv4:1597}
Assembler (.../z80/x86/x64...) the best language I've ever known

Outlook 2007 stops during Send/Recieve

Most of the threads I've read imply Outlook stops and needs system reboot to go again.
MY problem is Outlook just stops during Send/Receive - but it DOES start again after Receive is completed. It appears Outlook is working in the foreground and won't allow anything else to run while it downloads. Cannot open any other Outlook
function while Receive is processing
IS THERE A WAY to run Outlook in a background mode ?
Any other ideas ?
jfk

Hi,
Which account type are you using? Imap, POP3 or Exchange?
Many reasons may cause this issue, please refer to the KB article below and try the troubelshooting steps listed to check if the problem will be resolved:
https://support.microsoft.com/kb/2652320
Please let me know the result.
Regards,
Steve Fan
TechNet Community Support

Start network connection during boot [KDE4]

I want to able to connect to a network (with key) during boot.
Right now, when my arch is booting, it is trying to connect to a dhcpcd during boot, but fails (after several seconds). Then knetworkmanager and even wicd doesn't seem to work correctly. Knetworkmanager (from KDEmod) seems like doesn't work at all.
What can I do to make it connect during boot? (I usually connect only to one network).

I got it working.. however, I am wondering if I have everything right in my rc.config file, in DAEMONS section (maybe I have there something extra, which I can turn off).
#Static IP example
#eth0="eth0 192.168.0.2 netmask 255.255.255.0 broadcast 192.168.0.255"
#eth0="dhcp"
#INTERFACES=(eth0)
# Routes to start at boot-up (in this order)
# Declare each route then list in ROUTES
# - prefix an entry in ROUTES with a ! to disable it
gateway="default gw 192.168.0.1"
ROUTES=(!gateway)
# Enable these network profiles at boot-up. These are only useful
# if you happen to need multiple network configurations (ie, laptop users)
# - set to 'menu' to present a menu during boot-up (dialog package required)
# - prefix an entry with a ! to disable it
# Network profiles are found in /etc/network.d
# This now requires the netcfg package
NETWORKS=(wireless-wep)
# DAEMONS
# Daemons to start at boot-up (in this order)
# - prefix a daemon with a ! to disable it
# - prefix a daemon with a @ to start it up in the background
DAEMONS=(syslog-ng network netfs net-profiles hal !networkmanager crond alsa kdm)
Which one do I need? network, netfs? net-profiles?
Last edited by kdar (2009-12-16 02:17:01)

XAException during sending JMS message

I'am having following exception during sending JMS message using JMSService to remote OC4J queue:
04/09/15 16:35:02 XAException in errorRollback rollback(c0:a7:9:14:cd:2d:0:0:2a:
0:0:0:0:0:0:0:0:2b:0:ff:2:84:8c:1):
04/09/15 16:35:02 XAException in errorRollback null
04/09/15 16:35:02 XAException in errorRollback rollback(c0:a7:9:14:cd:2d:0:0:2a:
0:0:0:0:0:0:0:0:2b:0:ff:2:84:8c:1):
04/09/15 16:35:02 XAException in errorRollback null
<2004-09-15 16:35:02,717> <ERROR> <default.collaxa.cube.engine.dispatch> <BaseSc
heduledWorker::process> Failed to handle dispatch message ... exception Message
handle error.
An exception occurred while attempting to process the message "com.collaxa.cube.
engine.dispatch.message.invoke.InvokeInstanceMessage"; the exception is: Transac
tion was rolled back: TwoPhase Commit failed; nested exception is: javax.transac
tion.xa.XAException: rollback(c0:a7:9:14:cd:2d:0:0:2a:0:0:0:0:0:0:0:0:2b:0:ff:2:
84:8c:1):
Regards
Jarek

Hi Jarek,
Is it possible to send us a reproducible bpel package or steps to reproduce? you can send the test case to [email protected]
when you send the zip file could you please rename to .zap extension. I haven't seen this problem before. I want to reproduce this on my development env.
-muruga

No connection during sending efax

Similar Messages

Maybe you are looking for