No connection from SAP EP to Raytion SAP Connector

Hello,
The Raytion SAP connector 1.5.1 has been deployed without any problems on the customer SAP EP (Production). We see that no connection can be made from the SAP EP to this SAP Connector.
Extract from the log file: (10.54.17.63 is the IP address from the Raytion SAP Connector server.)
2008-04-03 13:30:40,082 DEBUG resource allowed by watched repository filter: true
2008-04-03 13:30:40,097 DEBUG resource allowed by hidden filter: true
2008-04-03 13:30:40,097 DEBUG resource allowed by size filter: true
2008-04-03 13:30:40,097 DEBUG resource allowed by Exclude RegEx filter: true
2008-04-03 13:30:40,097 DEBUG resource released by timebased service: true
2008-04-03 13:30:40,097 DEBUG resource released by statemanagement service: true
2008-04-03 13:30:40,191 INFO about to post /Intranet/Departement%20Facility%20Management/Dienst%20Schoonmaak/Nieuws/7061c4fe-fc43-2a10-05bc-bcb3aa83965c.xml
2008-04-03 13:30:42,082 WARN could not connect to connector server at http://10.54.17.63:16050/DataSource. http://portaal:50000/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/Intranet/Departement%20Facility%20Management/Dienst%20Schoonmaak/Nieuws/7061c4fe-fc43-2a10-05bc-bcb3aa83965c.xml not sent! com.caucho.hessian.io.HessianProtocolException:
2008-04-03 14:47:32,552 INFO Start security update initiated by Connector Server
2008-04-03 14:47:34,240 WARN could not connect to security cache at http://10.54.17.63:16050/Security. Start update notification not sent! com.caucho.hessian.io.HessianProtocolException:
2008-04-03 14:47:34,240 ERROR Could not send security synchronisation start notification. No server available.
The contractor that installed this, thinks the next area to look to is to see if the SAP EP has been configured somehow to stop outgoing http traffic from applications running within it... Maybe the EP is blocking outgoing HTTP access, although other components from the EP are working OK.
How can we check this?
Please advise.
Kind regards.

Check the following Links:
I want an explanation for this connection between R/3, CRM and IPC ??????
Document flow from R/3 to CRM
BP Changes From CRM to R/3
BP Changes From CRM to R/3
Reward Points if useful.

Similar Messages

Connect from Weblogic JMS queue to SAP WAS JMS queue

Hi,
I am trying to setup a WLS 8.1 messaging bridge between a weblogic JMS queue and a SAP WAS JMS queue. I have configured a queue on both Weblogic and SAP WAS and I have set up the messaging bridge and bridge destintations in weblogic. However when weblogic tries to get the SAP initial context factory it fails with the error below.
I have added the SAP Client jars to the weblogic system classpath, and in the weblogic startup script but it still fails. Has anyone connected from an external JMS queue to a SAP WAS JMS queue that could provide me with some guidence?
<10/08/2006 08:23:45 AM WST> <Warning> <Connector> <BEA-190032> << Weblogic Mess
aging Bridge Adapter (XA)_eis/jms/WLSConnectionFactoryJNDIXA > ResourceAllocatio
nException of javax.resource.ResourceException: ConnectionFactory: failed to get
initial context (InitialContextFactory =com.sap.engine.services.jndi.InitialCon
textFactoryImpl, url = ux0800:55304, user name = username) on createManagedConnectio
n.>
Thanks
Warren

Stoyan,
Thanks for that.
My problem ended up being a classpath problem. I referenced the directory of the SAP jars in the weblogic start up script. When I changed this to reference each jar individually it worked.
I have a new issue now which may have something to do with security. The trace suggests it is logging on as the guest user, even though I entered my username and password in the Messaging bridge.
#1.5#000E7FED310600A30000008A0000302D00041AA399E338B4#1155189870559#com.sap.jms##com.sap.jms.server.sessioncontainer.InboundBus instance=BWIP#J2EE_GUEST#0####165536f0283611db8903000e7fed3106#SAPEngine_Application_Thread[impl:3]_126##0#0#Error##Plain###com.sap.jms.server.exception.JMSServerInvalidDestinationException: No destination with ID=0 found.
 at com.sap.jms.server.service.impl.RegistryServiceImpl.getDestinationContext(RegistryServiceImpl.java:404)
 at com.sap.jms.server.sessioncontainer.InboundBus.getDestinationContext(InboundBus.java:98)
 at com.sap.jms.server.sessioncontainer.InboundBus.process(InboundBus.java:153)
 at com.sap.jms.server.sessioncontainer.InboundBus.enqueue(InboundBus.java:116)
 at com.sap.jms.server.sessioncontainer.SessionContainer.receiveFromDispatcher(SessionContainer.java:63)
 at com.sap.jms.server.routingcontainer.RoutingContainer.receiveFromDispatcher(RoutingContainer.java:447)
 at com.sap.jms.server.JMSServerContainer.dispatchRequest(JMSServerContainer.java:635)
 at com.sap.jms.server.JMSServerFrame.request(JMSServerFrame.java:536)
 at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
 at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
 at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
 at java.security.AccessController.doPrivileged(Native Method)
 at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
 at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
Warren

Problem with connecting from Netweaver Session Bean to SAP R/3

Hi,
i just want a connection to RFC in SAP R/3 and with help of sap ("Proxy generation" etc) and wizard in NWDS i get the rfc. Now i want to connect and use it (like in handbook) but: Every time i create and use jcoclient.connect() system gets an error like:
"Class File Editor
Source not found
The jar file jrfc.jar has no source attachment."
I have add all files that are used to "Used DCs" or bind library into projekt as "Third party library", but the error is still there.
Any idea? Do i have to make something else? Some failure made?
thx
Here is text for connection:
Created on 26.06.2008
To change the template for this generated file go to
Window>Preferences>Java>Code Generation>Code and Comments
package com.XXXXXXXXXXXXXXXXX;
import com.XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX;
import com.sap.aii.proxy.framework.core.ApplicationFaultException;
import com.sap.aii.proxy.framework.core.SystemFaultException;
import com.sap.mw.jco.JCO;
@author XXXXX
To change the template for this generated type comment go to
Window>Preferences>Java>Code Generation>Code and Comments
public class MyMainClass extends Object
     public static void main(String[] args)
          throws ApplicationFaultException, SystemFaultException
          JCO.Client jcoclient =
               JCO.createClient(
                    "XXX", //Client
                    "XXX", //User
                    "XXX", //Password
                    "XXX", //Language
                    "XXX", //Server
                    "XXX", //System
                    "XXX"); //Group
          jcoclient.connect();
          jcoclient.disconnect();
Edited by: Torsten on Aug 27, 2008 10:43 AM
Where can we download SAP NW7.0 (2004s) as Java Trial for testing? We only find ABAP Trial... Link? thx

So we tested some things that are described in the SDN or by SAP with Connectors.
We tested JCO version 2.0.12, 2.1.18 and 3.0 in J2EE Projects in netweaver and in Eclipse (Standalone).
For version 2.0.12 there is a failure that this version is not compatible with the other things in netweaver.
This version is for standalone and integrated sytems.
For version 2.1.18 is only described as standalone and so failure happened in netweaver that other classes are coruppted or missed. The internal test in "content administrator" (Ping and Test) do not work and had the same error.
For version 3.0 (that displace the other two versions) there is many to do in settings and coding that we do not have tested yet because project is not that small to write it for JCO 3.0 only for testing. When we only displaced files in netweaver the server do not start any more.
So:
Is there a way to call R/3 from session bean and 1. create an JCO client or 2. add a client to the "standard" pool of netweaver to use it?
Any ideas? help? links?
Project have to be complete in september...
Our combi is SAP Netweaver 2004 SP21 on Windows XP SP2 / Server 2003 Standard SP1 with JVM 1.4.2_16... need of any more info?
thx

Issue while connecting from Biztalk adapter to SAP ECC 6.0

Hi Friends
Issue while connecting from Visulal Studio 2005 to SAP ECC 6.0 throgh Biztalk adapter2.0, even if we pass the correct login details, system is throwing an error like incorrect user/password.
Can you please tell anybody the solution for this.
Regards
Praveen

HI,
is there a special "formation" to put in the user / pass ?
maybe a missing domain ? or missing values like "/" or "\" ?
Do you getting this error in the Biztalk Monitor (Visual 2005) ?

HTTPs connection from SAP WebAS

Hello,
I have to establish a connection from SAP WebAS to an iSaSiLk server via HTTPS.
The iSaSiLk authentication is based on client certificates.
I've created a SSL client PSE, generated the Certificate Request, imported the certificate response and the chain of certificates associated with no errors. When testing the connection we're getting the following error message:
SAP icm log:
[Thr 1087400256] ->> SapSSLSessionInit(&sssl_hdl=0x2aaaba679980, role=1 (CLIENT), auth_type=3 (USE_CLIENT_CERT))
[Thr 1087400256] <<- SapSSLSessionInit()==SAP_O_K
[Thr 1087400256] in: args = "role=1 (CLIENT), auth_type=3 (USE_CLIENT_CERT)"
[Thr 1087400256] out: sssl_hdl = 0x1a3310c0
[Thr 1087400256] ->> SapSSLSetNiHdl(sssl_hdl=0x1a3310c0, ni_hdl=22)
[Thr 1087400256] NiIBlockMode: set blockmode for hdl 22 TRUE
[Thr 1087400256] <<- SapSSLSetNiHdl(sssl_hdl=0x1a3310c0, ni_hdl=22)==SAP_O_K
[Thr 1087400256] ->> SapSSLSetSessionCredential(sssl_hdl=0x1a3310c0, &cred_name=0x1a49e4e0)
[Thr 1087400256] SapISSLComposeFilename(): Filename = "/usr/sap/XID/DVEBMGS00/sec/SAPSSLSPHTID.pse"
[Thr 1087400256] <<- SapSSLSetSessionCredential(sssl_hdl=0x1a3310c0)==SAP_O_K
[Thr 1087400256] in: cred_name = "/usr/sap/XID/DVEBMGS00/sec/SAPSSLSPHTID.pse"
[Thr 1087400256] ->> SapSSLSetTargetHostname(sssl_hdl=0x1a3310c0, &hostname=0x1a4a09e0)
[Thr 1087400256] <<- SapSSLSetTargetHostname(sssl_hdl=0x1a3310c0)==SAP_O_K
[Thr 1087400256] in: hostname = "<remoteServer_to_be_accessed>"
[Thr 1087400256] ->> SapSSLSessionStart(sssl_hdl=0x1a3310c0)
[Thr 1087400256] SapISSLUseSessionCache(): Creating NEW session (0 cached)
[Thr 1087400256] Tue Jan 13 10:10:22 2009
*[Thr 1087400256] *** ERROR during SecudeSSL_SessionStart() from SSL_connect()==SSL_ERROR_SSL*
[Thr 1087400256] session uses PSE file "/usr/sap/XID/DVEBMGS00/sec/SAPSSLSPHTID.pse"
[Thr 1087400256] SecudeSSL_SessionStart: SSL_connect() failed
secude_error 536871693 (0x2000030d) = "none of the PSEs registered with hSsl can suffice the negotiated SSL cipher suite"
[Thr 1087400256] >> Begin of Secude-SSL Errorstack >>
[Thr 1087400256] ERROR in ssl3_get_certificate_request: (536871693/0x2000030d) none of the PSEs registered with hSsl can suffice
[Thr 1087400256] << End of Secude-SSL Errorstack
[Thr 1087400256] SSL_get_state() returned 0x00002150 "SSLv3 read server certificate request A"
[Thr 1087400256] No certificate request received from Server
[Thr 1087400256] <<- ERROR: SapSSLSessionStart(sssl_hdl=0x1a3310c0)==SSSLERR_SSL_CONNECT
[Thr 1087400256] ->> SapSSLErrorName(rc=-57)
[Thr 1087400256] <<- SapSSLErrorName()==SSSLERR_SSL_CONNECT
[Thr 1087400256] *** ERROR => IcmConnInitClientSSL: SapSSLSessionStart failed (-57): SSSLERR_SSL_CONNECT [icxxconn_mt
On the iSaSiLk server we're getting:
ssl_debug(2): Starting handshake (iSaSiLk 3.06)...
ssl_debug(2): Received v3 client_hello handshake message.
ssl_debug(2): Client requested SSL version 3.0, selecting version 3.0.
ssl_debug(2): Creating new session 11:5F:04:C9:0D:32:15:B9...
ssl_debug(2): CipherSuites supported by the client:
ssl_debug(2): SSL_RSA_WITH_RC4_128_SHA
ssl_debug(2): SSL_RSA_WITH_RC4_128_MD5
ssl_debug(2): SSL_RSA_WITH_3DES_EDE_CBC_SHA
ssl_debug(2): SSL_RSA_WITH_DES_CBC_SHA
ssl_debug(2): SSL_RSA_EXPORT_WITH_DES40_CBC_SHA
ssl_debug(2): SSL_RSA_EXPORT_WITH_RC2_CBC_40_MD5
ssl_debug(2): SSL_RSA_EXPORT_WITH_RC4_40_MD5
ssl_debug(2): CompressionMethods supported by the client:
ssl_debug(2): NULL
ssl_debug(2): Sending server_hello handshake message.
ssl_debug(2): Selecting CipherSuite: SSL_RSA_WITH_RC4_128_SHA
ssl_debug(2): Selecting CompressionMethod: NULL
ssl_debug(2): Sending certificate handshake message with server certificate...
ssl_debug(2): Sending certificate_request handshake message...
ssl_debug(2): Sending server_hello_done handshake message...
ssl_debug(2): IOException while handshaking: Connection closed by remote host.
ssl_debug(2): Sending alert: Alert Fatal: handshake failure
ssl_debug(2): Shutting down SSL layer...
ssl_debug(2): Closing transport...
From the iSaSiLk everything seems to be OK, but on the SAP WebAS the error "none of the PSEs registered with hSsl can suffice the negotiated SSL cipher suite" is really unclear, since the cipher chosen by the iSaSiLk is one of the ciphers sent by SAP WebAS...
Can anyone give me any suggestion?

Hello Olivier,
Thanks for your answer.
I've implemented note 800240 which facilitates the PSE analysis by implementing the report ZSSF_TEST_PSE. With this report I'm able to check all the PSE content, which are:
Filename SAPSSLSPHTID.pse
PIN <no>
Signature X
Encryption X
Profile Parameter
DIR_INSTANCE /usr/sap/XID/DVEBMGS00 /usr/sap/XID/D00
sec/dsakeylengthdefault 1024
sec/libsapsecu /usr/sap/XID/SYS/exe/run/libsapcrypto.so
sec/rsakeylengthdefault 1024
ssf/name SAPSECULIB
ssf/ssf_md_alg SHA1
ssf/ssf_symencr_alg DES-CBC
ssf/ssfapi_lib /usr/sap/XID/SYS/exe/run/libsapcrypto.so
ssf2/name
ssf2/ssf_md_alg SHA1
ssf2/ssf_symencr_alg DES-CBC
ssf2/ssfapi_lib
ssf3/name
ssf3/ssf_md_alg SHA1
ssf3/ssf_symencr_alg DES-CBC
ssf3/ssfapi_lib
Environment variables
USER xidadm
SECUDIR /usr/sap/XID/DVEBMGS00/sec
PSE
Validity 18.12.2008 19:47:04 18.12.2009 19:47:04
Algorithm RSA (OID 1.2.840.113549.1.1.1)
Test signature
Signature OK
Verification OK
Test encryption
Encryption OK
Decryption OK
As you can see, the cipher algorithm used is RSA. Any suggestion... ?
An iSaSiLk server "is a Java programming language implementation of the SSLv2 (client-side), SSLv3, TLS 1.0 and TLS 1.1 protocols. It supports all defined cipher suites (except for Fortezza), including all AES and PSK cipher suites. iSaSiLk implements all standard TLS extensions, comes with an easy to use API and operates on top of the IAIK-JCE Javau2122 Cryptography Extension. iSaSiLk is highly configurable and will work with any alternative JCE implementation supported by a proper provider for supplying the required cryptographic algorithms".
Once again thanks for your answer.

Dbcon connection from sap db2 to external sql server

Hi ,
I am trying to connect from my sap server which is in unix platform with DB2 database to external SQL server using DBCON as MSSQL_SERVER=<server_name> MSSQL_DBNAME=<db_name>. But while running ADBC_TEST_connection i am getting the error . When i check the error log it says
Loading DB library '/usr/sap/DVL/SYS/exe/run/dbmssslib.so' ...
M *** ERROR => DlLoadLib()==DLENOACCESS - dlopen("/usr/sap/SID/SYS/exe/run/dbmssslib.so") FAILED
"Unable to find library '/usr/sap/DVL/SYS/exe/run/dbmssslib.so'." [dlux.c 445]
M {root-id=002655A9DCD21EE3B89D69F99DF39F0D}_{conn-id=00000000000000000000000000000000}_0
B *** ERROR => Couldn't load library '/usr/sap/SID/SYS/exe/run/dbmssslib.so'
How to resolve this issue. As it was mentioned in few forum we need to download the dbsl library from kernel patches and to load in kernel path. As my db is DB2 can we download dbmssslib.so this library and load in kernel file? Is it will work?
Regards,
Rai

Hi Rai,
This error indicates that the ABAP stack could not find the SAP DBSL for SQL Server (dbmssslib.dll) in the kernel directory. If you encounter this error on a Unix - based server the root cause is clear: the DBSL does not exist for other platforms than Windows or Linux x84_64. In this case use a Windows-based or a Linux x86_64-based SAP Application Server to establish the connection. If your system does not contain a Windows-based or a Linux x86_64-based Application Server you need to setup a small one as workaround. If you encounter this error on a Windows Application Server or a Linux x86_64 based Application Server make sure that the DBSL is properly installed in the kernel directory as explained in the document below.
For more details on configuration and troubleshooting refer to below SCN document
How to access an external Microsoft SQL Server database
Hope this helps.
Regards,
Deepak Kori

Remote Connection from SAP to MS-SQL server

Hello Experts,
We have been following 2 options so far and we have come across some issues
The first Option is to call a stored procedure (this is our preferred method) which does the data transfer for us
We have been able to test this scenario successfully from SQL Server side
However, while calling the stored proc via native SQL from ABAP we have come across an issue which is due to SQL 2005 changes (Schema implementation and difference in the security context)
While calling the stored procedure from the ABAP Code we have an error
The program short dumps with runtime error DBIF_DSQL2_SQL_ERROR, exception CX_SY_NATIVE_SQL_ERROR. The database error code is 15274, and the error text is
"Access to the remote server is denied because the current security context is not trusted."
This issue is new after the SQL Server 2005.
We are trying to resolve that.
Secondly we have been trying the DBCON option as well as per OSS Note 323151
We have a few things thatu2019s impacting our scenario:
The remote servers are in a different domain
The remote servers are located in DIZ
Remote server is a named instance
Remote server has been configured with a different port than standard (1565) u2013 All Connection strings will need port in there
The Database name starts with a numeric value
Due a combination of factors as mentioned above the standard approach does not work
Have any of you used this approach while connecting from SAP to MS-SQL server? Do you know of any successful methods to connect to SQL using ABAP (or not) from SAP.
Thanks in advance,

Yes,
DBConnect & UDConnect.
Works like a charm.
We write data into a MS-SQL database via DBConnect & an ABAP program (using open sql).

RFC connection from SAP Data services to SAP ECC

We have data services set up in linux machine. I am trying to set up RFC connection between data services and SAP ECC.
From data management console after creating RFC connection i am getting "RFC_bad_connection" error message. Username , password, system number, hostname and client is working from SAP GUI and has all the authorizations. SAP gateway and service is name is correct.
Did anyone had similar issue and what was the solution. Do we have start the RFC connection from linux data services machine, i didn't see any sh executable to do so.
Thanks in advance for helping to solve the RFC connection issue.
Edited by: gupta sasha az on Dec 19, 2011 7:24 PM

I am new to SAP and we have just started work on Data Services.
I wanted to know the complete procedure as in how can I establish a connection between Data Services and ECC.
Thanks for your help and time.

Designer Connection from SAP R3

Today it is possible to have connection from Designer to SAP R3, if possible I can send documentation about this issue is very important to our company know of their viability.
I appreciate your help.
Greetings

Hi Ingo;
We have SAP R/3 system running on Oracle Database. What I would like to ask is, is it possible to connect directly to the oracle to build a universe using R/3 tables in Oracle?
Thanks in advance
Dogus

SAP DB Connection from SAP BI on HP UNIX to MS SQL External Database

Dear All,
Greetings!
I have a scenario to configure a SAP DB Connection from SAP BI System on HP UNIX 11i to the external legacy system MS SQL 2000 Enterprise for data upload. I am interested in connecting the SQL server as a Source System to the BI System.
I read through documents mentioning about installation of a Client driver in the SAP BI System, I also downloaded the JDBC client software and tried installing the same, but the steps as mentioned Setting the CLASSPATH or connecting to the server did not work.
Please help me in connecting the SQL Server as Source System, I would like to know in detail about the same - so kindly help me with the links to documents and guides about the same.
Thank you
Regards,
Vineeth Damodar

Short answer: this does not work.
Long answer: To connect directly to the database you need
- a database client for the source system
- a database interface library for the source system
Both of them are not available for HP-UX if the target database is SQL server --> doesn't work.
What you can do is: add a Windows application server to your BI system (heterogeneous installations work and are supported) and add there the database client and the database interface library.
Markus

Connection from SAP ERP 6 to B1i2007

Hello,
the test-connection between B1i and SAP is working, but when trying to test the connection from SAP to B1i, SAP gives the error mesaage that "the program is not registered".
The B1i-System seems to be not registered in the SAP and it is only shown as "external client" (and not as registered server).
Another problem is that in B1i we have entered as programID-name "B1iRFC" but SAP shows "tomcat5" as TP-name.
I thought B1i would register automatically on the SAP with the name of the programm-id entered.
Do we have to change someting in the tomcat-server or where to find the problem?
Thank you,
Peter

Hello Eddy,
thank you for your answer, but in R/3 I define a RFC-connection with a registered server programm by using the programID out of the B1i-RFCP-configuration, right?
And when trying to make a test-connection, I got an error message that there is no registered program with this programID.
I thought that B1i have to be registered in SAP or in the SAP-Gateway with the name of this programID.
I think my problem is the registered server program in R/3. Where do I get this program and how to register in the R/3 gateway? Isn't the tomcat-server this program?
Best regards,
Peter

Connection from SAP to our systems involving 2 saprouters

connection from SAP to our systems involving 2 saprouters
we have 1 saprouter inside a dmz and another for connecting to our systems.
we are guessing that this is possible
SAP (sapserv2) -
SNC----> saprouter1 (DMZ, SNC connection) -
> saprouter2 (P * * 3200) ---> SAP1, SAP2...
But how could we do that?
How can we let SAP know that they need to connect to 2 saprouters instead of 1?
The "Mantain System Data" in sap service marketplace only lets us introduce 1 saprouter.
And how should be the saproutettab of the 2 saprouters?
saprouter1:
KT "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 000.00.00.00 *
P * saprouter2 3299
saprouter2:
P * * 3200
P * * 3600
is that possible?
Many thanks !!

Hi
As far as my experience goes with this you have to maintain both router information in oss1 tcode
Also mention second router on the second router tab on the SMP data
I hope it should work with that as it will automatically create router table

Connection from DP to SAP PI 7.11 via SOAP/https failed

Hello Guys,
we have a problem with connection from DP to SAP PI via SOAP/https.
DP send a request and get a timeout. timeout is 2 or 3 minutes.
DP and SAP PI authentificated with certificates.
Our Problems:
DP get now failure code
in commnication channel monitoring in RWB from SAP PI I see no entry, no error
in java default trace I see no error.
What could be the Problem? What must we configure for https communication via SOAP Adapter?
Which Log get me some information?
Thanks and regards
Martin

Hi Neetesh,
I have check all, but it resolved not my problem.
I will describe my scenario again:
scenario:
syncronous request from system A over DataPower ->SAP PI to SAP system.
communication DataPower to PI: SOAP over https
DataPower located in other network zone.
port is activated in firewall.
called URL from DataPower:
https://<host>:5<instance number>01/XISOAPAdapter/MessageServlet?
channel=:<business system>:<interface>
Problem:
authentication looks like ok. No error in ICM Trace, in default java
trace login from DataPower IP-adress ok.
but no message is to see in the communication channel.
no message in the adapter engine, no message in the integration engine
DataPower get a timeout. (Timeout 2 minutes)
we find no error, but also no message
What could be the error? And where find I some information in SAP PI.
Thanks and regards
Martin

Is this possible: SNC connection from SAP GUI to SAP Router, and ...

Hi,
I have (stupid perhaps) question.
Is this scenario possible:
SNC connection from SAP GUI to SAP Router, and non-SNC connection from SAP Router to SAP System.
I know how to set up scenario like this:
SAP System --- (non-SNC conn) --- saprouter1 --- (SNC conn) --- saprouter2 --- (non-SNC conn) --- SAP GUI.
Best regards,
Marek Majchrowski

Wolfgang,
To be sure myself and Marek understand, can you confirm the different scenarios supported:
Scenario 1:
SAP GUI --- (non SNC conn) --- saprouter1 --- (SNC conn) --- saprouter2 --- (non-SNC conn) --- SAP System
With this scenario, it would be possible for a user to logon using SAP GUI onto the SAP System, but without SAP GUI SNC.
Scenario 2:
SAP GUI --- (SNC conn) --- saprouter1 --- (non SNC conn) --- saprouter2 --- (SNC conn) --- SAP System
With this scenario it would be possible to logon to the SAP System using SAP GUI, and using SNC authentication.
Also, with this scenario the SAP GUI software and SAP System software would consider this to be similar to:
SAP GUI -- (SNC conn) -- SAP System
Scenario 3:
This is the scenario mentioned by Marek in his initial question:
SAP GUI -- (SNC conn) -- saprouter1 -- (non SNC conn) -- SAP System
With this scenario it will not be possible to logon to SAP System using SNC, and only possible if the SAP GUI is configured to not use SNC. In other words the SNC connection between SAP GUI and saprouter1 is available, but cannot be used.
Thanks,
Tim
Edited by: Tim Alsop on Feb 25, 2008 5:24 PM

Remoted DB2 connection from SAP

Hello Experts,
We have a requirement to connect the remote DB DB2 (No SAP) which is on I series from our SAP ECC EHP 5 system so I made a below entry in table DBCON -
Database connection - PRMS_TEST
DBS - DB4
Username - SAP
*Password ***********
Connection Information - AS4_HOST=S1031993;AS4_DB_LIBRARY=RMTLIB
but while doing the test connection, it gives the below error-
B Loading DB library '/usr/sap/ECD/DVEBMGS00/exe/dbdb4slib.so' ...
M *** ERROR => DlLoadLib()==DLENOACCESS - dlopen("/usr/sap/ECD/DVEBMGS00/exe/dbdb4slib.so") FAILED
"/usr/sap/ECD/DVEBMGS00/exe/dbdb4slib.so: cannot open shared object file: No such file or directory" [dlux.c 445]
M {root-id=000C298267DF1EE0BBC9171365715368}_{conn-id=00000000000000000000000000000000}_0
B *** ERROR => Couldn't load library '/usr/sap/ECD/DVEBMGS00/exe/dbdb4slib.so'
[dbcon.c 5263]
B {root-id=000C298267DF1EE0BBC9171365715368}_{conn-id=00000000000000000000000000000000}_0
B ***LOG BYG=> could not load library for database connection PRMS_TEST [dbds 886]
B ***LOG BZY=> unexpected return code 8192 calling DBDS [dbacds 1536]
My SAP environment is -
SAP - ECC EHP 5
Kernel Release 720 patch 90
OS - Red Hat Linux 5.5 - 64 bit
Database - DB2 (DB6)
Kindlly let us know if I have to put the file dbdb4slib.so in kernel directory and from where I can get this file and if my DBCON entry is correct ?
Regards
Saurabh Mishra

As per note 663756, I can use the DB2 CLI driver as I am on Kernel release 720 (see below) -
If you use a DB2 CLI driver client, the following changes are required in
the procedure described above because the CLI driver does not support DB2
CLP and BIND commands:
o The CATALOG commands are omitted.
o The target host and port must be entered in the table DBCON.
For example, the CON ENV row looks as follows:
DB6_DB_NAME=HOSTDB;DB6_DB_TYPE=DB2/390;DB6_DB_HOST=<hostname>;
DB6_DB_SVCENAME=<portnum>;
o The BIND commands must be executed by a runtime client.
Alternatively, you can use the DB2Binder utility from Note 784264
to bind the CLI packages.
Is that mean that I need to only maintain the DBCON entry as all other commands are omitted for CLI driver and license file is mandatory or temp license will work ?
As per note 784264, I checked my CLASSPATH directory and it contain the JDBC driver file -
sapecdci1:db2ecd 58> pwd
/db2/db2ecd/db2_software/java
sapecdci1:db2ecd 59> ls db2*.jar
db2dbgm.jar db2jcc4.jar db2jcc.jar db2jcc_license_cu.jar db2policy.jar db2umplugin.jar
sapecdci1:db2ecd 60> db2set -all
[e] DB2DBDFT=ECD
 DB2_RESTORE_GRANT_ADMIN_AUTHORITIES=YES [DB2_WORKLOAD]
 DB2_BLOCKING_WITHHOLD_LOBLOCATOR=NO [DB2_WORKLOAD]
 DB2_AGENT_CACHING_FMP=OFF [DB2_WORKLOAD]
 DB2_TRUST_MDC_BLOCK_FULL_HINT=YES [DB2_WORKLOAD]
 DB2_CREATE_INDEX_COLLECT_STATS=YES [DB2_WORKLOAD]
 DB2_ATS_ENABLE=YES [DB2_WORKLOAD]
 DB2_RESTRICT_DDF=YES [DB2_WORKLOAD]
 DB2_DUMP_SECTION_ENV=YES [DB2_WORKLOAD]
 DB2_OPT_MAX_TEMP_SIZE=10240 [DB2_WORKLOAD]
 DB2_WORKLOAD=SAP
 DB2_TRUNCATE_REUSESTORAGE=IMPORT [DB2_WORKLOAD]
 DB2_MDC_ROLLOUT=DEFER [DB2_WORKLOAD]
 DB2_ATM_CMD_LINE_ARGS=-include-manual-tables [DB2_WORKLOAD]
 DB2_SKIPINSERTED=YES [DB2_WORKLOAD]
 DB2_VIEW_REOPT_VALUES=YES [DB2_WORKLOAD]
 DB2_OBJECT_TABLE_ENTRIES=65532 [DB2_WORKLOAD]
 DB2_OPTPROFILE=YES [DB2_WORKLOAD]
 DB2_IMPLICIT_UNICODE=YES [DB2_WORKLOAD]
 DB2_RUNTIME_DEBUG_FLAGS=TOLERANT_FLOAT [DB2_WORKLOAD]
 DB2STMM=APPLY_HEURISTICS:YES [DB2_WORKLOAD]
 DB2_INLIST_TO_NLJN=YES [DB2_WORKLOAD]
 DB2_MINIMIZE_LISTPREFETCH=YES [DB2_WORKLOAD]
 DB2_REDUCED_OPTIMIZATION=4,INDEX,JOIN,NO_TQ_FACT,NO_HSJN_BUILD_FACT,STARJN_CARD_SKEW,NO_SORT_MGJOIN,CART OFF,CAP OFF [DB2_WORKLOAD]
 DB2NOTIFYVERBOSE=YES [DB2_WORKLOAD]
 DB2TERRITORY=1
 DB2_INTERESTING_KEYS=YES [DB2_WORKLOAD]
 DB2_EVALUNCOMMITTED=YES [DB2_WORKLOAD]
 DB2_EXTENDED_OPTIMIZATION=NLJOIN_KEYCARD,IXOR [DB2_WORKLOAD]
 DB2_ANTIJOIN=EXTEND [DB2_WORKLOAD]
 DB2COMPOPT=327685,131776 [DB2_WORKLOAD]
 DB2ATLD_PORTS=60000:65000
 DB2ENVLIST=INSTHOME SAPSYSTEMNAME dbs_db6_schema DIR_LIBRARY LD_LIBRARY_PATH
 DB2COMM=TCPIP [DB2_WORKLOAD]
[g] DB2FCMCOMM=TCPIP4
[g] DB2SYSTEM=sapecdci1
[g] DB2INSTDEF=db2ecd
sapecdci1:db2ecd 61> java com.ibm.db2.jcc.DB3Binder
Exception in thread "main" java.lang.NoClassDefFoundError: com.ibm.db2.jcc.DB3Binder
 at gnu.java.lang.MainThread.run(libgcj.so.7rh)
Caused by: java.lang.ClassNotFoundException: com.ibm.db2.jcc.DB3Binder not found in gnu.gcj.runtime.SystemClassLoader{urls=[file:/db2/db2ecd/sqllib/java/db2jcc_license_cu.jar,file:/db2/db2ecd/sqllib/java/db2jcc.jar,file:/db2/db2ecd/sqllib/function/,file:./,file:/db2/db2ecd/sqllib/java/db2java.zip,file:./,file:/db2/db2ecd/sqllib/java/db2java.zip,file:./], parent=gnu.gcj.runtime.ExtensionClassLoader{urls=[], parent=null}}
 at java.net.URLClassLoader.findClass(libgcj.so.7rh)
 at java.lang.ClassLoader.loadClass(libgcj.so.7rh)
 at java.lang.ClassLoader.loadClass(libgcj.so.7rh)
 at gnu.java.lang.MainThread.run(libgcj.so.7rh)
sapecdci1:db2ecd 62> db2 get dbm cfg | grep -i svcename
TCP/IP Service name (SVCENAME) = sapdb2ECD
SSL service name (SSL_SVCENAME) =

No connection from SAP EP to Raytion SAP Connector

Similar Messages

Maybe you are looking for