No Connection to Integraion Builder in SPROXY transaction

Hello
I am trying to activate ABAP Proxies for SAP WebAS 6.4 system as given in weblog
/people/vijaya.kumari2/blog/2006/01/26/how-do-you-activate-abap-proxies
I did all the steps mentioned
1] Created HTTP destinations which is successful
2] Created Integration server configuration in SXMB_ADM pointing to XI
3] Created TCP/IP destinations
Still its giving the above problem. Is anything missing?
Thanks in advance.
Regards
Rajeev

Hello
But when I test the HTTP destination it is successful.
Heres what response I got from that.
HTTP/1.0 500 Empty HTTP request received
Content-Type: text/xml
Content-Length: 815
content-id: <[email protected]>
soapaction: 'http://sap.com/xi/XI/Message/30'
server: SAP Web Application Server (1.0;700)
<SOAP:Envelope xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
<SOAP:Header>
</SOAP:Header>
<SOAP:Body>
<SOAP:Fault xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/"><faultcode>SOAP:Client</faultcode><faultstring>Empty HTTP request received</faultstring><faultactor>http://sap.com/xi/XI/Message/30</faultactor><detail><SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1"><SAP:Category>XIProtocol</SAP:Category><SAP:Code area="MESSAGE">EMPTY_HTTP_REQUEST_RECEIVED</SAP:Code><SAP:P1/><SAP:P2/><SAP:P3/><SAP:P4/><SAP:AdditionalText/><SAP:ApplicationFaultMessage namespace=""/><SAP:Stack>Empty HTTP query received; message processing not possible
</SAP:Stack></SAP:Error></detail></SOAP:Fault>
</SOAP:Body>
</SOAP:Envelope>
That means its able to connect to XI system.
Thanks and Regards
Rajeev

Similar Messages

No Connection to Integration Builder in SPROXY transaction

Hi everyone!
I've gone through the blog ; /people/vijaya.kumari2/blog/2006/01/26/how-do-you-activate-abap-proxies
Checked all my configuration and everything seems to be ok!
But in my business system (ECC6.0/webas 7.0), I'm still getting the "No Connection to Integration Builder" in transaction SPROXY!
When I run SLDCHECK, everything is OK! Checked SM59 connections = OK!
Can you tell me what's missing in this case? Do I need to activate the XI profile on ECC6?

Hi again,
Did the test connection in SM59 and got the following response;
<SOAP:Envelope xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
<SOAP:Header />
- <SOAP:Body>
- <SOAP:Fault xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
<faultcode>SOAP:Client</faultcode>
<faultstring>Empty HTTP request received</faultstring>
<faultactor>http://sap.com/xi/XI/Message/30</faultactor>
- <detail>
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIProtocol</SAP:Category>
<SAP:Code area="MESSAGE">EMPTY_HTTP_REQUEST_RECEIVED</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Empty HTTP query received; message processing not possible</SAP:Stack>
</SAP:Error>
</detail>
</SOAP:Fault>
</SOAP:Body>
</SOAP:Envelope>
Regards,

SPROXY: No connection to Integration Builder (only local data visible)

¡Hola!
When I try to access the transaction SPROXY I get the message "No connection to Integration Builder (only local data visible)".
I already did the configuration steps described in the XI Configuration Guide, section 8: Connecting Business Systems with an Integration Engine to the Central Integration Server. I also checked that the parameters in the Exchange Profile were correct.
Transaction SLDCHECK is working ok. The TCP/IP connections SAPSLDAPI & LCRSAPRFC work OK when I do Test Connection.
In transaction SPROXY, when I do Connection Test the first 2 steps work fine, but I get an error on the last two:
1. The address of the Integration Builder must be stored in the R/3
     System
     =>Check/maintain with report SPROX_CHECK_IFR_ADDRESS
Result: OK: Address maintained
2. The HTTP connection of the R/3 application server must function
correctly
=>Check with report SPROX_CHECK_HTTP_COMMUNICATION
Result: HTTP communication functioning
The following 2 steps return an error:
3. The Integration Builder server must be running correctly
=>Check with report SPROX_CHECK_IFR_RESPONSE
Result: Integration Builder data not understood
4. Proxy generation must correctly interpret the data of the
Integration Builder
==>Check with report SPROX_CHECK_IFR_CONNECTION
Result: Integration Builder data not understood
I've been looking in the forums and weblogs but haven't been able to figure out what could be wrong with my system.   Can someone please help?
Thanks and Regards,
Carlos

Carlos,
Check Global Configuration data in R3 using TC : SXMB_ADM.
You need to set values..Role of Business System : Application System and Corresponding Integration server details.
Also check your HTTP RFC connection : INTEGRATION_DIRECTORY_HMI
Nilesh
Message was edited by:
        Nilesh Kshirsagar

SPROXY No connection to Integration Builder SLDCHECK working okay

Hi,
In R/3, when I run SPROXY transaction, I get "No connection to Integration Builder ".
I have gone thru blog
[How do you activate ABAP Proxies? |How do you activate ABAP Proxies?]- Activate Proxy.
I have done all the config in R/3 and sldcheck is working fine.
I have also edited "Integration Engine Configuration".
I have added 2 entries in Specific Configuration.
RUNTIME ENGINE_TYPE LOC
RUNTIME IS_URL http://xidpro100:8000/sap/xi/engine?type=entry
But still getting this error.
Regards,
Anirudh.

Hi,
check, have you maintain values in sldapicust.
and check the host file entries in os level.
check the rfc is working properly INTEGRATION_DIRECTORY_HMI
In integration engine configuration role of business system as Application sytem
and corresponding integ server as dest://SAPISU_XID
check this values are there
then get back we will resolve this issue..
Regards
Vijay
Edited by: vijay Kumar on Sep 20, 2008 8:28 AM

SPROXY:No connection to integration builder

hi friends..
While i am trying to access the transaction sproxy in my receiver R/3 system i am getting message saying "No connection to integration builder(only local data visible)"..
I searched in xi forums also.. i couldn't find any solution for that.. Please anybody an help me .. to solve this problem... I am trying to solve last three hours.. Please help to solve this issue...
Thanks friends
kumar

Hi Kumar,
The same provlem was solved here
No connection to Integration Builder
To understand in detail have a look at this
https://websmp102.sap-ag.de/~sapidb/011000358700001697502004E.PDF
Topic: 8 Connecting Business Systems with an Integration Engine to the Central Integration Server
Regards,
Prateek

No connection to Integration Builder (only generic data visible)(SPROXY)

Dear All,
I am Establishing connection between BW and XI.
I am getting "No connection to Integration Builder (only generic data visible)" error while opening SPROXY T-Code, also it shows user Menu Disable.
Please suggest me to solve the error.
thanks,
RP

hi RP,
I too had same problem, below are the things taken care and finally fixed.
1. SLDAPICUST settings pointing to SLD system & port
2. Create SAPSLDAPI & LCRSAPRFC RFCs pointing to program ID created with SLD and XI system using VA (JCo RFC provider)
3. Set the require settings with RZ70 pointing to XI system name & HTTP port
4.Create ABAP based HTTP RFC pointing to Target system (XI system ) with HTTP port (smicm-goto-services) and path prefix with "/sap/xi/engine?type=entry" (without quotes). Ensure this RFC is existing at both the ends (source & target).
5. If incase all ready the Technical System & Business existing at SLD for your business system, you may require to remove them and add them back/manually.
Please let me know if any more info require.
Thanks
Chandra

No Connection to Integration Builder

I have connected one our SAP Systems to our XI system in the XI technical and business landscape.
Whats weird is that when I log into the system that is connected and try to run the transaction sproxy, I get a message saying that there is no connection to the integration builder.
I do now know how to proceed.
Thoughts anyone?

Hello
I have a similar problem. I am trying to configure my Application System (not XI) so that SPROXY works.
My systems are:
- Application System asystem -> host = ahost, port = aport
- Integration System isystem-> host = ihost, port = iport
At first I opened http://<ahost>:<iport>/exchangeProfile. Because I received errors I went to "Connections" (http://<ahost>:<aport>/exchangeProfile/connection.jsp) and entered the connection parameter for my isystem.
Afterwards my Exchange Profile was filled with the entries of my isystem. This means:
com.sap.aii.connect.repository.name = ihost
com.sap.aii.connect.repository.httpport = iport
com.sap.aii.connect.repository.contextRoot = rep
com.sap.aii.connect.integrationbuilder.startpage.url = rep/start/index.jsp
Is this correct?
Any help is appreciated
Best regards
Markus

Enterprise Services in ECC using SPROXY transaction

Dear All,
We were able see the Enterprise Services available in ECC 6.0 EHP 3 using the transaction SPROXY, we have even tested one proxy through this transaction. But now when we have configured ECC to connect the ESR (of PI), it is only showing Software components / Service Interface available in ESR throught the SPROXY transaction in ECC and not showing the Enterprise Services which are available in ECC.
How to see both the things, existing Enterprise Services of ECC and Service Interfaces of ESR through SPROXY transaction in ECC?
please help.
thanks and regards,
Ravi

Hi Ravi,
It may be that you just need a delta cache refresh but I would start by checking the SLD configuration.
First strt with SAP Note: 1169869
- I think that you might need to try changing the vendor (sap.com) that's assigned to the Software Component Version.
- If you were seeing the SWCV before it should be installed on your system anyway but you can double check using the steps I've specified here: [Can't find ESA ECC-SE 603 SWCV;
- You might also want to check if the SWC is correctly assigned to the relevant business system/s in the SLD.
Regards, Trevor

No connection to integration builder (Only local data visible)

Hi,
I am created Interface objects in IR but it is not reflected in SPROXY (ECC 5.0). It is showing like this no connection to integration builder (Only local data visible) please can you help me necessary configuration.
Regards,
-Prabakar.A

HI Prabakar,
the Business System SM59 destinations LCRSAPRFC & SAPSLDAPI
should have the Program IDs
SAPSLDAPI _UNICODE.
LCRSAPRFC_UNICODE
See the online help for connecting Biusiness Systems
[Connecting Unicode Business Systems|http://help.sap.com/saphelp_nwpi71/helpdata/en/c9/7a1041ebf0f06fe10000000a1550b0/frameset.htm]
see also
[Connecting to the Integration Server|http://help.sap.com/saphelp_nwpi71/helpdata/en/c9/7a1041ebf0f06fe10000000a1550b0/frameset.htm]
Regards
Kenny
Edited by: Kenny Scott on Feb 25, 2010 5:02 PM

No Connection to Integration Builder (only local data visible): from R/3

Hi,
I am also facing the same problem. I maintained the RFC destinations in R/3 properly. I did Test Connection and for RFC destination its working fine. I maintained proper values in SLDAPICUST. When I run SLDCHECK I got the following error.
Calling function LCR_LIST_BUSINESS_SYSTEMS
Retrieving data from the SLD server...
Function call returned exception code 4
=> Check whether the SLD is running!
Summary: Connection to SLD does not work
=> Check SLD function and configurations
Otherwise access to XI Profile works fine. But then when I run SPROXY I am getting the same message No Connection to Integration Builder (only local data visible)
I also checked the following report =>Check with report SPROX_CHECK_IFR_RESPONSE (3rd option) its giving informational message Integration Builder data not understood, for the 4th report ==>Check with report SPROX_CHECK_IFR_CONNECTION, it is also showing the same above information message.
Looking forward for the response,
Appreciate your help,
Thanks and Regards,
Jagadish

Hi,
I had the same problem and I have already solved it.
You have just to apply the following sap notes :
1232805 - Saint: Queue calculation for an add-on with CRT´s fail.
769120 - Support Package for APPINT 200_620
The first one is to update tha SPAM/SAINT to v 30 and the second one allow you use the pi/xi objects on application system.
There is another sap note 689847, but you just apply this if the sap notes above described did not work.
Paulo Correa

Hi Doubt Regarding SPROXY Transaction

Hi,
When i log on to my R3(>6.2) system with SPROXY transaction. i am not able to see the message interfaces witch i have developed in XI system, may i know the reasons. Do i need to configure anything between R3 and XI? and how to configure the SPROXY setting between R3 and XI? plz help me out.
thanks
dhanush.

Check the below blog this may point you in the right direction.
How do you activate ABAP Proxies?
also run this report in the R/3 and c what's the problem if all are sucessfull the you can c the interfcess fom SPROXY
SPROX_CHECK_IFR_ADDRESS -
OK Address maintained
SPROX_CHECK_HTTP_COMMUNICATION----- Connection Functioning
SPROX_CHECK_IFR_RESPONSE---- IB DATA understood
SPROX_CHECK_IFR_CONNECTION---IB DATA understood
also
Make sure that you have completed your entry in SLDAPICUST.
Do the following steps,
1. Transaction SXMB_ADM (refer to the Configuration Guide, chapter 5)
- Role of System: Application System
- Corresponding Integration Server:
dest://<your_sm59_http_destination>
2. Ensure that the RFC destinations LCRSAPRFC and SAPSLDAPI are
maintained and working (refer to the Configuration Guide, chapter 5.3)
3. Run SLDCHECK to verify that the connection to the System Landscape
Directory works.
4. Check that the Integration Repository is running and data is maintained there.
Message was edited by:
n Khan

Error while connecting to workflow builder after installation...first time!

Hi,
I have installed Oracle Workflow Builder 2.6.3 recently on my system and after installation, when I am trying to connect the workflow builder (using database username/password of that particular instance), it is throwing me the following error:
220: Unable to set NLS_LANGUAGE.
210: Oracle Error: ORA-01403: no data found
. SQL text: SELECT NLS_LANGUAGE FROM WF_LANGUAGES WHERE :l IN (NLS_LANGUAGE, CODE)
In the previous threads when I searched for the same issue, I found that if
select value from v$nls_parameters
where parameter='NLS_CHARACTERSET';
returns the value other then WE8ISO8859P1 then that is what I should change my NLS_LANG entry for the builder - i.e. AMERICAN_AMERICA.<character set>.
But I am not getting where should I change NLS_LANG, it is located where...some file? I am new to Workflow.
Please help me. I tried a lot. Any type of help will be highly appreciated.
Thanks,
Sumir

This issue (and solution) is described in ML Doc 577905.1 (Error While Connecting To Database Via Workflow Builder)
HTH
Srini

Error while connecting to workflow builder 2.6.3

Hi,
I have installed Oracle Workflow Builder 2.6.3 recently on my system and after installation, when I am trying to connect the workflow builder (using database username/password of that particular instance), it is throwing me the following error:
220: Unable to set NLS_LANGUAGE.
210: Oracle Error: ORA-01403: no data found
. SQL text: SELECT NLS_LANGUAGE FROM WF_LANGUAGES WHERE :l IN (NLS_LANGUAGE, CODE)
In the previous threads when I searched for the same issue, I found that if
select value from v$nls_parameters
where parameter='NLS_CHARACTERSET';
returns the value other then WE8ISO8859P1 then that is what I should change my NLS_LANG entry for the builder - i.e. AMERICAN_AMERICA.<character set>.
But I am not getting where should I change NLS_LANG, it is located where...some file? I am new to Workflow.
Please help me. I tried a lot. Any type of help will be highly appreciated.
Thanks,
Sumir

Hi;
This forum site related wiht Oracle database installation.I suggest,close your issue here as answered than move your issue Forum Home » Database » Workflow* which you can get more quick response
Regard
Helios

Error when connecting to form builder

When I try to connect to form builder ,I get this error message ,
ORA-12154:TNS: could not resolve service name
What is it?

Try connecting through SQLPLUS first and check if the connection is going through fine. Check if the service name your are trying to connect with is defined in the TNSNAMES.ORA file. If it is not present create the service name. Also mention the versions of Oracle DB and the Forms.

How to change the PREFIX of a ABAP proxy in SPROXY transaction?

Hi Experts,
I created a ABAP proxy by right clicking (CREATE PROXY) the Service Interface in SPROXY transaction.
At the time, I have given ZMY_XI_ as a prefix in the box of PROXY of tab of properties, fine. Now I need to change the PREFIX, so, clicked the pencil button and changed and trying to SAVE or ACTIVATE, but am getting message saying that "Name must begin with YXI_II"
Pls. let me know that even though SAP has given this field as editable field (on clicking the pencil button), why still am getting this error?
How to get my requirement to be done?
Thank you

Howdy,
You have to delete the proxy (save any code you've done first) and start again with the prefix you want - as all subobjects need to be generated with the same prefix.
Cheers
Alex

No Connection to Integraion Builder in SPROXY transaction

Similar Messages

Maybe you are looking for