No connection to system possible
Hi,
We upgraded from 4.6c to ECC6 and we had separate BW 3.0b. but we didn't upgrade BW to ECC6.
So now my task is to re-do all infoobjects, cubes etc in ECC6.
Now i'm trying to figure out, any easy method to do it via RFC connection between BW 3.0 and ECC6 BI, can copy all the objects back to BI.
So when i go to BI source system creation for BW 3.0 getting the following error:
==========================
No connection to system possible
Message no. RSAR501
Diagnosis
Logical system cannot be accessed.
System Response
RFC destination %%ashost=172.16.33.31,sysnr=,clien t=000,logon_screen=X does not
Procedure
Use transaction SM59 (for BAPI and SAP source systems) or DBCO (for database source systems) to check the RFC parameters of source system . Also check whether the system can be accessed in the network and whether the necessary application and system programs have been started.
===========================
In SM59 i can able to remote logon to BW 3.0 from ECC6 and also vice versa.
So i'm just thinking, whether i'm going on the correct path or this cannot be done at all.
Thanks.
Hey Ani,
I found the following on SDN:
RSAR 154 error while trying to connect an R3 system in BW
Since your on 3.0 maybe Note 581273 applies to you.
Anyways do check the access with sm59 on BOTH system.
Hope this helps,
Andreas
Similar Messages
-
RSA1 - Source system connection : No connection to system possible
Hello friends,
I am creating a Source system connection from our BW system. I have already established the working RFC connection to source system which works fine, both side client is open & system is modifiable.
Bit i am getting error : No connection to system possible
No connection to system possible
Message no. RSAR501
Diagnosis
Logical system cannot be accessed.
System Response
Error during the retrieval of the logon data store d in secure storage
Procedure
Use transaction SM59 (for BAPI and SAP source systems) or DBCO (for database source systems) to check the RFC parameters of source system . Also check whether the system can be accessed in the network and whether the necessary application and system programs have been started.
I have already implemented SAP note 1276270 - RSAR 501 for source system restore due to router string /H/ without success.
thanks
ashishError during the retrieval of the logon data store d in secure storage
Have you tested the remote login also ?
Regards,
Subhash -
No connect to database possible while logging in sap system
hi to all experts ,
all the work process are wait state but with one work process i have error 1 and when im trying to logon to sap im getting this message no connect to database possible session terminated
dev_disp
trc file: "dev_disp", trc level: 1, release: "700"
sysno 00
sid EC6
systemid 560 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 75
intno 20050900
make: multithreaded, Unicode, optimized
pid 3664
Thu Jul 10 00:06:23 2008
kernel runs with dp version 217000(ext=109000) (@(#) DPLIB-INT-VERSION-217000-UC)
length of sys_adm_ext is 572 bytes
*** SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (00 3664) [dpxxdisp.c 1237]
shared lib "dw_xml.dll" version 75 successfully loaded
shared lib "dw_xtc.dll" version 75 successfully loaded
shared lib "dw_stl.dll" version 75 successfully loaded
shared lib "dw_gui.dll" version 75 successfully loaded
shared lib "dw_mdm.dll" version 75 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3900
Thu Jul 10 00:06:28 2008
*** WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5273]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >gcecc6_EC6_00 <
DpShMCreate: sizeof(wp_adm) 18304 (1408)
DpShMCreate: sizeof(tm_adm) 3994272 (19872)
DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528056/528064
DpShMCreate: sizeof(comm_adm) 528064 (1048)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1440)
DpShMCreate: sizeof(wall_adm) (38456/34360/64/184)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 05FF0040, size: 4653368)
DpShMCreate: allocated sys_adm at 05FF0040
DpShMCreate: allocated wp_adm at 05FF1E40
DpShMCreate: allocated tm_adm_list at 05FF65C0
DpShMCreate: allocated tm_adm at 05FF65F0
DpShMCreate: allocated wp_ca_adm at 063C5890
DpShMCreate: allocated appc_ca_adm at 063CB650
DpShMCreate: allocated comm_adm at 063CD590
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 0644E450
DpShMCreate: allocated gw_adm at 0644E490
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 0644E4C0
DpShMCreate: allocated wall_adm at 0644E4C8
MBUF state OFF
DpCommInitTable: init table for 500 entries
Thu Jul 10 00:06:29 2008
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation flat
<EsNT> Memory Reset disabled as NT default
<ES> 511 blocks reserved for free list.
ES initialized.
J2EE server info
start = TRUE
state = STARTED
pid = 1712
argv[0] = C:\usr\sap\EC6\DVEBMGS00\exe\jcontrol.EXE
argv[1] = C:\usr\sap\EC6\DVEBMGS00\exe\jcontrol.EXE
argv[2] = pf=C:\usr\sap\EC6\SYS\profile\EC6_DVEBMGS00_gcecc6
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=2122
argv[5] = -DSAPSYSTEM=00
argv[6] = -DSAPSYSTEMNAME=EC6
argv[7] = -DSAPMYNAME=gcecc6_EC6_00
argv[8] = -DSAPPROFILE=C:\usr\sap\EC6\SYS\profile\EC6_DVEBMGS00_gcecc6
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c 1623]
***LOG Q0K=> DpMsAttach, mscon ( gcecc6) [dpxxdisp.c 11586]
DpStartStopMsg: send start message (myname is >gcecc6_EC6_00 <)
DpStartStopMsg: start msg sent
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: Initalizing shared memory of size 60000000 for monitoring segment.
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1050]
DpMsgAdmin: Set patchno for this platform to 75
Release check o.K.
Thu Jul 10 00:06:30 2008
DpJ2eeLogin: j2ee state = CONNECTED
Thu Jul 10 00:06:43 2008
***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4235]
*** ERROR => NiIRead: SiRecv failed for hdl 4 / sock 1524
(SI_ECONN_BROKEN; I4; ST; 127.0.0.1:2124) [nixxi.cpp 4235]
DpJ2eeMsgProcess: j2ee state = CONNECTED (NIECONN_BROKEN)
DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=1712)
DpIJ2eeShutdown: j2ee state = SHUTDOWN
Thu Jul 10 00:07:09 2008
J2EE server info
start = TRUE
state = STARTED
pid = 5372
argv[0] = C:\usr\sap\EC6\DVEBMGS00\exe\jcontrol.EXE
argv[1] = C:\usr\sap\EC6\DVEBMGS00\exe\jcontrol.EXE
argv[2] = pf=C:\usr\sap\EC6\SYS\profile\EC6_DVEBMGS00_gcecc6
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=2191
argv[5] = -DSAPSYSTEM=00
argv[6] = -DSAPSYSTEMNAME=EC6
argv[7] = -DSAPMYNAME=gcecc6_EC6_00
argv[8] = -DSAPPROFILE=C:\usr\sap\EC6\SYS\profile\EC6_DVEBMGS00_gcecc6
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
DpJ2eeLogin: j2ee state = CONNECTED
Thu Jul 10 00:07:12 2008
MBUF state ACTIVE
Thu Jul 10 00:07:15 2008
DpModState: change server state from STARTING to ACTIVE
Thu Jul 10 00:08:09 2008
*** ERROR => W8 (pid 2248) died [dpxxdisp.c 14241]
Thu Jul 10 00:08:35 2008
***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4235]
*** ERROR => NiIRead: SiRecv failed for hdl 6 / sock 1484
(SI_ECONN_BROKEN; I4; ST; 127.0.0.1:2192) [nixxi.cpp 4235]
DpJ2eeMsgProcess: j2ee state = CONNECTED (NIECONN_BROKEN)
DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=5372)
*** ERROR => DpProcKill: kill failed [dpntdisp.c 371]
DpIJ2eeShutdown: j2ee state = SHUTDOWN
Thu Jul 10 00:08:49 2008
J2EE server info
start = TRUE
state = STARTED
pid = 1960
argv[0] = C:\usr\sap\EC6\DVEBMGS00\exe\jcontrol.EXE
argv[1] = C:\usr\sap\EC6\DVEBMGS00\exe\jcontrol.EXE
argv[2] = pf=C:\usr\sap\EC6\SYS\profile\EC6_DVEBMGS00_gcecc6
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=2252
argv[5] = -DSAPSYSTEM=00
argv[6] = -DSAPSYSTEMNAME=EC6
argv[7] = -DSAPMYNAME=gcecc6_EC6_00
argv[8] = -DSAPPROFILE=C:\usr\sap\EC6\SYS\profile\EC6_DVEBMGS00_gcecc6
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
DpJ2eeLogin: j2ee state = CONNECTED
Thu Jul 10 00:09:44 2008
***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4235]
*** ERROR => NiIRead: SiRecv failed for hdl 4 / sock 1572
(SI_ECONN_BROKEN; I4; ST; 127.0.0.1:2255) [nixxi.cpp 4235]
DpJ2eeMsgProcess: j2ee state = CONNECTED (NIECONN_BROKEN)
DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=1960)
DpIJ2eeShutdown: j2ee state = SHUTDOWN
Thu Jul 10 00:09:49 2008
J2EE server info
start = TRUE
state = STARTED
pid = 4832
argv[0] = C:\usr\sap\EC6\DVEBMGS00\exe\jcontrol.EXE
argv[1] = C:\usr\sap\EC6\DVEBMGS00\exe\jcontrol.EXE
argv[2] = pf=C:\usr\sap\EC6\SYS\profile\EC6_DVEBMGS00_gcecc6
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=2302
argv[5] = -DSAPSYSTEM=00
argv[6] = -DSAPSYSTEMNAME=EC6
argv[7] = -DSAPMYNAME=gcecc6_EC6_00
argv[8] = -DSAPPROFILE=C:\usr\sap\EC6\SYS\profile\EC6_DVEBMGS00_gcecc6
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
DpJ2eeLogin: j2ee state = CONNECTED
Thu Jul 10 00:09:55 2008
***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4235]
*** ERROR => NiIRead: SiRecv failed for hdl 6 / sock 1472
(SI_ECONN_BROKEN; I4; ST; 127.0.0.1:2303) [nixxi.cpp 4235]
DpJ2eeMsgProcess: j2ee state = CONNECTED (NIECONN_BROKEN)
DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=4832)
DpIJ2eeShutdown: j2ee state = SHUTDOWN
Thu Jul 10 00:10:09 2008
J2EE server info
start = TRUE
state = STARTED
pid = 2124
argv[0] = C:\usr\sap\EC6\DVEBMGS00\exe\jcontrol.EXE
argv[1] = C:\usr\sap\EC6\DVEBMGS00\exe\jcontrol.EXE
argv[2] = pf=C:\usr\sap\EC6\SYS\profile\EC6_DVEBMGS00_gcecc6
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=2381
argv[5] = -DSAPSYSTEM=00
argv[6] = -DSAPSYSTEMNAME=EC6
argv[7] = -DSAPMYNAME=gcecc6_EC6_00
argv[8] = -DSAPPROFILE=C:\usr\sap\EC6\SYS\profile\EC6_DVEBMGS00_gcecc6
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
DpJ2eeLogin: j2ee state = CONNECTED
Thu Jul 10 00:10:14 2008
***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4235]
*** ERROR => NiIRead: SiRecv failed for hdl 4 / sock 1468
(SI_ECONN_BROKEN; I4; ST; 127.0.0.1:2382) [nixxi.cpp 4235]
DpJ2eeMsgProcess: j2ee state = CONNECTED (NIECONN_BROKEN)
DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=2124)
DpIJ2eeShutdown: j2ee state = SHUTDOWN
Thu Jul 10 00:10:29 2008
J2EE server info
start = TRUE
state = STARTED
pid = 4180
argv[0] = C:\usr\sap\EC6\DVEBMGS00\exe\jcontrol.EXE
argv[1] = C:\usr\sap\EC6\DVEBMGS00\exe\jcontrol.EXE
argv[2] = pf=C:\usr\sap\EC6\SYS\profile\EC6_DVEBMGS00_gcecc6
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=2414
argv[5] = -DSAPSYSTEM=00
argv[6] = -DSAPSYSTEMNAME=EC6
argv[7] = -DSAPMYNAME=gcecc6_EC6_00
argv[8] = -DSAPPROFILE=C:\usr\sap\EC6\SYS\profile\EC6_DVEBMGS00_gcecc6
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
DpJ2eeLogin: j2ee state = CONNECTED
Thu Jul 10 00:10:34 2008
***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4235]
*** ERROR => NiIRead: SiRecv failed for hdl 6 / sock 1464
(SI_ECONN_BROKEN; I4; ST; 127.0.0.1:2415) [nixxi.cpp 4235]
DpJ2eeMsgProcess: j2ee state = CONNECTED (NIECONN_BROKEN)
DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=4180)
DpIJ2eeShutdown: j2ee state = SHUTDOWN
Thu Jul 10 00:10:49 2008
J2EE server info
start = TRUE
state = STARTED
pid = 6436
argv[0] = C:\usr\sap\EC6\DVEBMGS00\exe\jcontrol.EXE
argv[1] = C:\usr\sap\EC6\DVEBMGS00\exe\jcontrol.EXE
argv[2] = pf=C:\usr\sap\EC6\SYS\profile\EC6_DVEBMGS00_gcecc6
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=2439
argv[5] = -DSAPSYSTEM=00
argv[6] = -DSAPSYSTEMNAME=EC6
argv[7] = -DSAPMYNAME=gcecc6_EC6_00
argv[8] = -DSAPPROFILE=C:\usr\sap\EC6\SYS\profile\EC6_DVEBMGS00_gcecc6
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
Thu Jul 10 00:10:50 2008
DpJ2eeLogin: j2ee state = CONNECTED
Thu Jul 10 00:10:54 2008
***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4235]
*** ERROR => NiIRead: SiRecv failed for hdl 4 / sock 1460
(SI_ECONN_BROKEN; I4; ST; 127.0.0.1:2445) [nixxi.cpp 4235]
DpJ2eeMsgProcess: j2ee state = CONNECTED (NIECONN_BROKEN)
DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=6436)
DpIJ2eeShutdown: j2ee state = SHUTDOWN
Thu Jul 10 00:11:09 2008
J2EE server info
start = TRUE
state = STARTED
pid = 7244
argv[0] = C:\usr\sap\EC6\DVEBMGS00\exe\jcontrol.EXE
argv[1] = C:\usr\sap\EC6\DVEBMGS00\exe\jcontrol.EXE
argv[2] = pf=C:\usr\sap\EC6\SYS\profile\EC6_DVEBMGS00_gcecc6
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=2491
argv[5] = -DSAPSYSTEM=00
argv[6] = -DSAPSYSTEMNAME=EC6
argv[7] = -DSAPMYNAME=gcecc6_EC6_00
argv[8] = -DSAPPROFILE=C:\usr\sap\EC6\SYS\profile\EC6_DVEBMGS00_gcecc6
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
DpJ2eeLogin: j2ee state = CONNECTED
Thu Jul 10 00:11:14 2008
***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4235]
*** ERROR => NiIRead: SiRecv failed for hdl 6 / sock 1456
(SI_ECONN_BROKEN; I4; ST; 127.0.0.1:2492) [nixxi.cpp 4235]
DpJ2eeMsgProcess: j2ee state = CONNECTED (NIECONN_BROKEN)
DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=7244)
DpIJ2eeShutdown: j2ee state = SHUTDOWN
Thu Jul 10 00:11:29 2008
J2EE server info
start = TRUE
state = STARTED
pid = 7560
argv[0] = C:\usr\sap\EC6\DVEBMGS00\exe\jcontrol.EXE
argv[1] = C:\usr\sap\EC6\DVEBMGS00\exe\jcontrol.EXE
argv[2] = pf=C:\usr\sap\EC6\SYS\profile\EC6_DVEBMGS00_gcecc6
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=2512
argv[5] = -DSAPSYSTEM=00
argv[6] = -DSAPSYSTEMNAME=EC6
argv[7] = -DSAPMYNAME=gcecc6_EC6_00
argv[8] = -DSAPPROFILE=C:\usr\sap\EC6\SYS\profile\EC6_DVEBMGS00_gcecc6
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
DpJ2eeLogin: j2ee state = CONNECTED
Thu Jul 10 00:11:34 2008
***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4235]
*** ERROR => NiIRead: SiRecv failed for hdl 4 / sock 1452
(SI_ECONN_BROKEN; I4; ST; 127.0.0.1:2513) [nixxi.cpp 4235]
DpJ2eeMsgProcess: j2ee state = CONNECTED (NIECONN_BROKEN)
DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=7560)
DpIJ2eeShutdown: j2ee state = SHUTDOWN
Thu Jul 10 00:11:49 2008
J2EE server info
start = TRUE
state = STARTED
pid = 7932
argv[0] = C:\usr\sap\EC6\DVEBMGS00\exe\jcontrol.EXE
argv[1] = C:\usr\sap\EC6\DVEBMGS00\exe\jcontrol.EXE
argv[2] = pf=C:\usr\sap\EC6\SYS\profile\EC6_DVEBMGS00_gcecc6
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=2539
argv[5] = -DSAPSYSTEM=00
argv[6] = -DSAPSYSTEMNAME=EC6
argv[7] = -DSAPMYNAME=gcecc6_EC6_00
argv[8] = -DSAPPROFILE=C:\usr\sap\EC6\SYS\profile\EC6_DVEBMGS00_gcecc6
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
Thu Jul 10 00:11:50 2008
DpJ2eeLogin: j2ee state = CONNECTED
Thu Jul 10 00:11:54 2008
***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4235]
*** ERROR => NiIRead: SiRecv failed for hdl 6 / sock 1456
(SI_ECONN_BROKEN; I4; ST; 127.0.0.1:2545) [nixxi.cpp 4235]
DpJ2eeMsgProcess: j2ee state = CONNECTED (NIECONN_BROKEN)
DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=7932)
DpIJ2eeShutdown: j2ee state = SHUTDOWN
Thu Jul 10 00:12:09 2008
DpEnvCheckJ2ee: switch off j2ee start flag
DEV_W0
trc file: "dev_w0", trc level: 1, release: "700"
* ACTIVE TRACE LEVEL 1
* ACTIVE TRACE COMPONENTS all, MJ
B
B Thu Jul 10 00:06:30 2008
B create_con (con_name=R/3)
B Loading DB library 'C:\usr\sap\EC6\DVEBMGS00\exe\dboraslib.dll' ...
B Library 'C:\usr\sap\EC6\DVEBMGS00\exe\dboraslib.dll' loaded
B Version of 'C:\usr\sap\EC6\DVEBMGS00\exe\dboraslib.dll' is "700.08", patchlevel (0.73)
B New connection 0 created
M sysno 00
M sid EC6
M systemid 560 (PC with Windows NT)
M relno 7000
M patchlevel 0
M patchno 75
M intno 20050900
M make: multithreaded, Unicode, optimized
M pid 1416
M
M kernel runs with dp version 217000(ext=109000) (@(#) DPLIB-INT-VERSION-217000-UC)
M length of sys_adm_ext is 572 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 1416) [dpxxdisp.c 1299]
I MtxInit: 30000 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
M DpShMCreate: sizeof(wp_adm) 18304 (1408)
M DpShMCreate: sizeof(tm_adm) 3994272 (19872)
M DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
M DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
M DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528056/528064
M DpShMCreate: sizeof(comm_adm) 528064 (1048)
M DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
M DpShMCreate: sizeof(file_adm) 0 (72)
M DpShMCreate: sizeof(vmc_adm) 0 (1440)
M DpShMCreate: sizeof(wall_adm) (38456/34360/64/184)
M DpShMCreate: sizeof(gw_adm) 48
M DpShMCreate: SHM_DP_ADM_KEY (addr: 05FF0040, size: 4653368)
M DpShMCreate: allocated sys_adm at 05FF0040
M DpShMCreate: allocated wp_adm at 05FF1E40
M DpShMCreate: allocated tm_adm_list at 05FF65C0
M DpShMCreate: allocated tm_adm at 05FF65F0
M DpShMCreate: allocated wp_ca_adm at 063C5890
M DpShMCreate: allocated appc_ca_adm at 063CB650
M DpShMCreate: allocated comm_adm at 063CD590
M DpShMCreate: system runs without file table
M DpShMCreate: allocated vmc_adm_list at 0644E450
M DpShMCreate: allocated gw_adm at 0644E490
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 0644E4C0
M DpShMCreate: allocated wall_adm at 0644E4C8
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation flat
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
M ThInit: running on host gcecc6
M
M Thu Jul 10 00:06:34 2008
M calling db_connect ...
C Prepending C:\usr\sap\EC6\DVEBMGS00\exe to Path.
C Oracle Client Version: '10.2.0.1.0'
C Client NLS settings: AMERICAN_AMERICA.UTF8
C Logon as OPS$-user to get SAPSR3's password
C Connecting as /@EC6 on connection 0 (nls_hdl 0) ... (dbsl 700 110706)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 UTF8 1 05C87968 05C8CF04 05C8C78C
C Attaching to DB Server EC6 (con_hdl=0,svchp=05C8C6D8,svrhp=05C9C464)
C
C Thu Jul 10 00:06:48 2008
C Starting user session (con_hdl=0,svchp=05C8C6D8,srvhp=05C9C464,usrhp=05CAECF8)
C Now '/@EC6' is connected (con_hdl 0, nls_hdl 0).
C Got SAPSR3's password from OPS$-user
C Disconnecting from connection 0 ...
C Closing user session (con_hdl=0,svchp=05C8C6D8,usrhp=05CAECF8)
C Now I'm disconnected from ORACLE
C Connecting as SAPSR3/<pwd>@EC6 on connection 0 (nls_hdl 0) ... (dbsl 700 110706)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 UTF8 1 05C87968 05C8CF04 05C8C78C
C Starting user session (con_hdl=0,svchp=05C8C6D8,srvhp=05C9C464,usrhp=05CAECF8)
C Now 'SAPSR3/<pwd>@EC6' is connected (con_hdl 0, nls_hdl 0).
C Database NLS settings: AMERICAN_AMERICA.UTF8
C Database instance EC6 is running on GCECC6 with ORACLE version 10.2.0.2.0 since 20080710
B Connection 0 opened (DBSL handle 0)
B Wp Hdl ConName ConId ConState TX PRM RCT TIM MAX OPT Date Time DBHost
B 000 000 R/3 000000000 ACTIVE NO YES NO 000 255 255 20080710 000634 GCECC6
M db_connect o.k.
M ICT: exclude compression: *.zip,*.cs,*.rar,*.arj,*.z,*.gz,*.tar,*.lzh,*.cab,*.hqx,*.ace,*.jar,*.ear,*.war,*.css,*.pdf,*.js,*.gzip,*.uue,*.bz2,*.iso,*.sda,*.sar,*.gif
I
I Thu Jul 10 00:07:08 2008
I MtxInit: 0 0 0
M SHM_PRES_BUF (addr: 0AA30040, size: 4400000)
M SHM_ROLL_AREA (addr: 788A0040, size: 61440000)
M SHM_PAGING_AREA (addr: 0AE70040, size: 32768000)
M SHM_ROLL_ADM (addr: 0CDC0040, size: 615040)
M SHM_PAGING_ADM (addr: 0CE60040, size: 525344)
M ThCreateNoBuffer allocated 544152 bytes for 1000 entries at 0CEF0040
M ThCreateNoBuffer index size: 3000 elems
M ThCreateVBAdm allocated 12160 bytes (50 server) at 06660040
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation flat
X ES initialized.
B db_con_shm_ini: WP_ID = 0, WP_CNT = 13, CON_ID = -1
B dbtbxbuf: Buffer TABL (addr: 12B700C8, size: 30000000, end: 1480C448)
B dbtbxbuf: Buffer TABLP (addr: 148100C8, size: 10240000, end: 151D40C8)
B
B Thu Jul 10 00:07:09 2008
B dbexpbuf: Buffer EIBUF (addr: 151E00D0, size: 4194304, end: 155E00D0)
B dbexpbuf: Buffer ESM (addr: 155F00D0, size: 4194304, end: 159F00D0)
B dbexpbuf: Buffer CUA (addr: 15A000D0, size: 3072000, end: 15CEE0D0)
B dbexpbuf: Buffer OTR (addr: 15CF00D0, size: 4194304, end: 160F00D0)
M CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
S
S Thu Jul 10 00:07:10 2008
S *** init spool environment
S initialize debug system
T Stack direction is downwards.
T debug control: prepare exclude for printer trace
T new memory block 1B3D3950
S spool kernel/ddic check: Ok
S using table TSP02FX for frontend printing
S 1 spool work process(es) found
S frontend print via spool service enabled
S printer list size is 150
S printer type list size is 50
S queue size (profile) = 300
S hostspool list size = 3000
S option list size is 30
S found processing queue enabled
S found spool memory service RSPO-RCLOCKS at 1F6300A8
S doing lock recovery
S setting server cache root
S found spool memory service RSPO-SERVERCACHE at 1F630430
S using messages for server info
S size of spec char cache entry: 297028 bytes (timeout 100 sec)
S size of open spool request entry: 2132 bytes
S immediate print option for implicitely closed spool requests is disabled
A
A ---PXA-------------------------------------------
A PXA INITIALIZATION
A System page size: 4kb, total admin_size: 5132kb, dir_size: 5076kb.
A Attached to PXA (address 688A0040, size 150000K)
A abap/pxa = shared protect gen_remote
A PXA INITIALIZATION FINISHED
A ---PXA-------------------------------------------
A
A
A Thu Jul 10 00:07:11 2008
A ABAP ShmAdm attached (addr=57A1C000 leng=20955136 end=58E18000)
A >> Shm MMADM area (addr=57E91E58 leng=126176 end=57EB0B38)
A >> Shm MMDAT area (addr=57EB1000 leng=16150528 end=58E18000)
A RFC Destination> destination gcecc6_EC6_00 host gcecc6 system EC6 systnr 0 (gcecc6_EC6_00)
A RFC Options> H=gcecc6,S=00,d=2,
A RFC FRFC> fallback activ but this is not a central instance.
A
A RFC rfc/signon_error_log = -1
A RFC rfc/dump_connection_info = 0
A RFC rfc/dump_client_info = 0
A RFC rfc/cp_convert/ignore_error = 1
A RFC rfc/cp_convert/conversion_char = 23
A RFC rfc/wan_compress/threshold = 251
A RFC rfc/recorder_pcs not set, use defaule value: 2
A RFC rfc/delta_trc_level not set, use default value: 0
A RFC rfc/no_uuid_check not set, use default value: 0
A RFC rfc/bc_ignore_thcmaccp_retcode not set, use default value: 0
A RFC Method> initialize RemObjDriver for ABAP Objects
M ThrCreateShObjects allocated 13730 bytes at 06680040
M ThVBStartUp: restart pending update requests
B dbtran INFO (init_connection '<DEFAULT>' [ORACLE:700.08]):
B max_blocking_factor = 5, max_in_blocking_factor = 5,
B min_blocking_factor = 5, min_in_blocking_factor = 5,
B prefer_union_all = 0, prefer_join = 0,
B prefer_fix_blocking = 0, prefer_in_itab_opt = 1,
B convert AVG = 0, alias table FUPD = 0,
B escape_as_literal = 1, opt GE LE to BETWEEN = 0,
B select * =0x0f, character encoding = STD / <none>:-,
B use_hints = abap->1, dbif->0x1, upto->2147483647, rule_in->0,
B rule_fae->0, concat_fae->0, concat_fae_or->0
M ThVBAutoStart: update-auto-delete
N SsfSapSecin: putenv(SECUDIR=C:\usr\sap\EC6\DVEBMGS00\sec): ok
N
N =================================================
N === SSF INITIALIZATION:
N ===...SSF Security Toolkit name SAPSECULIB .
N ===...SSF trace level is 0 .
N ===...SSF library is C:\usr\sap\EC6\DVEBMGS00\exe\sapsecu.dll .
N ===...SSF hash algorithm is SHA1 .
N ===...SSF symmetric encryption algorithm is DES-CBC .
N ===...sucessfully completed.
N =================================================
N MskiInitLogonTicketCacheHandle: Logon Ticket cache pointer retrieved from shared memory.
N MskiInitLogonTicketCacheHandle: Workprocess runs with Logon Ticket cache.
M JrfcVmcRegisterNativesDriver o.k.
W =================================================
W === ipl_Init() called
W ITS Plugin: Path dw_gui
W ITS Plugin: Description ITS Plugin - ITS rendering DLL
W ITS Plugin: sizeof(SAP_UC) 2
W ITS Plugin: Release: 700, [7000.0.75.20050900]
W ITS Plugin: Int.version, [32]
W ITS Plugin: Feature set: [10]
W ===... Calling itsp_Init in external dll ===>
W === ipl_Init() returns 0, ITSPE_OK: OK
W =================================================
E Enqueue Info: rdisp/wp_no_enq=1, rdisp/enqname=<empty>, assume gcecc6_EC6_00
E
E Thu Jul 10 00:07:12 2008
E Replication is disabled
E EnqCcInitialize: local lock table initialization o.k.
E EnqId_SuppressIpc: local EnqId initialization o.k.
E EnqCcInitialize: local enqueue client init o.k.
M MBUF info for hooks: MS component UP
M ThSetEnqName: set enqname by server list
M ThISetEnqname: enq name = >gcecc6_EC6_00 <
E
E *************** EnqId_EN_ActionAtMsUpHook ***************
E Hook on upcoming Ms (with EnqSrv), get auth EnqId and check it locally
E
E *************** ObjShMem_CheckAuthoritativeEnqId ***************
E Checking authoritative EnqId from EnqSrv into ObjShMem
E ObjShMem_CheckAuthoritativeEnqId: ObjShMem ...
E EnqId.EnqTabCreaTime = -999
E EnqId.RandomNumber = -999
E ReqOrd.TimeInSecs = -999
E ReqOrd.ReqNumberThisSec = -999
E ObjShMem_CheckAuthoritativeEnqId: ObjShMem ...
E EnqId.EnqTabCreaTime = -999
E EnqId.RandomNumber = -999
E ReqOrd.TimeInSecs = -999
E ReqOrd.ReqNumberThisSec = -999
E ObjShMem_CheckAuthoritativeEnqId: EnqId is initial in ShMem
E ObjShMem_CheckAuthoritativeEnqId: Overwrite incoming auth EnqId, continue
E EnqId inscribed into initial ObjShMem: (ObjShMem_CheckAuthoritativeEnqId)
E ---SHMEM--------------------------------------------------------------------------------
E EnqId: EnqTabCreaTime/RandomNumber = 10.07.2008 00:07:11 1215628631 / 2560
E ReqOrd at Srv: TimeInSecs/ReqNumberThisSec = 10.07.2008 00:07:12 1215628632 / 1
E ReqOrd at Cli: TimeInSecs/ReqNumberThisSec = 10.07.2008 00:07:12 1215628632 / 1
E Status: STATUS_OK
E ----------------------------------------------------------------------------------------
M
M Thu Jul 10 00:07:15 2008
M ThActivateServer: state = STARTING
L BtcSysStartRaise: Begin
L Raise event SAP_SYSTEM_START with parameter <gcecc6_EC6_00 >
L BtcSysStartRaise: End
M
M Thu Jul 10 00:07:32 2008
M SecAudit(RsauShmInit): WP attached to existing shared memory.
M SecAudit(RsauShmInit): addr of SCSA........... = 05FC0040
M SecAudit(RsauShmInit): addr of RSAUSHM........ = 05FC07A8
M SecAudit(RsauShmInit): addr of RSAUSLOTINFO... = 05FC07E0
M SecAudit(RsauShmInit): addr of RSAUSLOTS...... = 05FC07EC
C
C Thu Jul 10 00:08:19 2008
C *** ERROR => ORA-3113 occurred when executing SQL statement (parse error offset=0)
[dbsloci.c 12548]
C sc_p=05BDE198,no=48,idc_p=00000000,con=0,act=1,slen=97,smax=256,#vars=0,stmt=1FA374E8,table=V$LOG
C SELECT SUBSTR ( TO_CHAR ( SEQUENCE#-1, '0999999999' ), 4, 8 ) FROM V$LOG WHERE STATUS = 'CURRENT';
C sc_p=05BDE198,no=48,idc_p=00000000,con=0,act=1,slen=97,smax=256,#vars=0,stmt=1FA374E8,table=V$LOG
C prep=0,lit=0,nsql=1,lobret=0,#exec=1,dbcnt=0,upsh_p=00000000,ocistmth_p=1FA30364
C IN : cols=0,rmax=0,xcnt=0,rpc=0,rowi=0,rtot=0,upto=-1,rsize=0,vmax=0,bound=0,iobuf_p=00000000,vda_p=00000000
C lobs=0,lmax=0,lpcnt=0,larr=00000000,lcurr_p=00000000,rret=0
C OUT: cols=1,rmax=3611,xcnt=3611,rpc=0,rowi=0,rtot=0,upto=-1,rsize=16,vmax=32,bound=1,iobuf_p=1B38F7E8,vda_p=1FA37758
C lobs=0,lmax=0,lpcnt=0,larr=00000000,lcurr_p=00000000,rret=0
C SELECT SUBSTR ( TO_CHAR ( SEQUENCE#-1, '0999999999' ), 4, 8 ) FROM V$LOG WHERE STATUS = 'CURRENT';
B ***LOG BY2=> sql error 3113 performing FET [dbds#1 @ 592] [dbds 0592 ]
B ***LOG BY0=> ORA-03113: end-of-file on communication channel [dbds#1 @ 592] [dbds 0592 ]
C *** ERROR => ORA-3114 occurred when executing SQL statement (parse error offset=0)
[dbsloci.c 12548]
C sc_p=05BDD3AC,no=15,idc_p=05BEDB84,con=0,act=1,slen=184,smax=256,#vars=3,stmt=1B5332C8,table=REPOLOAD
C SELECT "UNAM" , "UDAT" , "UTIME" , "L_DATALG" , "Q_DATALG" , "SDAT" , "STIME" , "MINOR_VERS" , "MAJO\
C R_VERS" FROM "REPOLOAD" WHERE "PROGNAME" = :A0 AND "R3STATE" = :A1 AND "MACH" = :A2 ;
C sc_p=05BDD3AC,no=15,idc_p=05BEDB84,con=0,act=1,slen=184,smax=256,#vars=3,stmt=1B5332C8,table=REPOLOAD
C prep=0,lit=0,nsql=0,lobret=0,#exec=23,dbcnt=0,upsh_p=00000000,ocistmth_p=1B525E94
C IN : cols=3,rmax=1,xcnt=0,rpc=0,rowi=0,rtot=0,upto=-1,rsize=86,vmax=32,bound=1,iobuf_p=05A2E748,vda_p=1B5345E8
C lobs=0,lmax=0,lpcnt=0,larr=00000000,lcurr_p=00000000,rret=0
C OUT: cols=9,rmax=1,xcnt=1,rpc=1,rowi=0,rtot=1,upto=-1,rsize=96,vmax=32,bound=1,iobuf_p=1B38F7E8,vda_p=1B534A58
C lobs=0,lmax=0,lpcnt=0,larr=00000000,lcurr_p=00000000,rret=0
C SELECT "UNAM" , "UDAT" , "UTIME" , "L_DATALG" , "Q_DATALG" , "SDAT" , "STIME" , "MINOR_VERS" , "MAJO\
C R_VERS" FROM "REPOLOAD" WHERE "PROGNAME" = :A0 AND "R3STATE" = :A1 AND "MACH" = :A2 ;
B ***LOG BYM=> severe DB error 3114 ; work process in reconnect status [dbsh#2 @ 1123] [dbsh 1123 ]
B ***LOG BY4=> sql error 3114 performing SEL on table REPOLOAD [dbrepo#4 @ 2656] [dbrepo 2656 ]
B ***LOG BY0=> ORA-03114: not connected to ORACLE [dbrepo#4 @ 2656] [dbrepo 2656 ]
A TH VERBOSE LEVEL FULL
A ** RABAX: level LEV_RX_PXA_RELEASE_MTX entered.
A ** RABAX: level LEV_RX_PXA_RELEASE_MTX completed.
A ** RABAX: level LEV_RX_COVERAGE_ANALYSER entered.
A ** RABAX: level LEV_RX_COVERAGE_ANALYSER completed.
A ** RABAX: level LEV_RX_ROLLBACK entered.
M ***LOG R68=> ThIRollBack, roll back () [thxxhead.c 13155]
C *** ERROR => OCI-call 'OCITransRollback' failed: rc = 3114
[dboci.c 3003]
B ***LOG BYM=> severe DB error 3114 ; work process in reconnect status [dbsh#2 @ 1123] [dbsh 1123 ]
B Reconnect state is entered by connection:
B 0: name = R/3, con_id = 000000000 state = ACTIVE , perm = YES, reco = YES, timeout = 000, con_max = 255, con_opt = 255, occ = NO
B hdl_error_on_commit_rollback: DB-ROLLBACK detected RECONNECT state
M ThShortCommit: db unusable
B RECONNECT: rsdb/reco_trials: 3
B RECONNECT: rsdb/reco_sleep_time: 5
B RECONNECT: rsdb/reco_sync_all_server: OFF
B db_con_reconnect disconnecting connection:
B 0: name = R/3, con_id = 000000000 state = INACTIVE , perm = YES, reco = YES, timeout = 000, con_max = 255, con_opt = 255, occ = NO
C Disconnecting from connection 0 ...
C Closing user session (con_hdl=0,svchp=05C8C6D8,usrhp=05CAECF8)
C Detaching from DB Server (con_hdl=0,svchp=05C8C6D8,srvhp=05C9C464)
C Now I'm disconnected from ORACLE
B db_con_reconnect performing the reconnect for con:
B 0: name = R/3, con_id = 000000000 state = DISCONNECTED, perm = YES, reco = YES, timeout = 000, con_max = 255, con_opt = 255, occ = NO
C Client NLS settings:
C Logon as OPS$-user to get SAPSR3's password
C Connecting as /@EC6 on connection 0 (nls_hdl 0) ... (dbsl 700 110706)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 UTF8 1 05C87968 05C8CF04 05C8C78C
C Attaching to DB Server EC6 (con_hdl=0,svchp=05C8C6D8,svrhp=05C9C464)
C
C Thu Jul 10 00:09:42 2008
C *** ERROR => OCI-call 'OCIServerAttach' failed: rc = 12518
[dboci.c 4172]
C *** ERROR => CONNECT failed with sql error '12518'
[dbsloci.c 10933]
C Try to connect with default password
C Connecting as SAPSR3/<pwd>@EC6 on connection 0 (nls_hdl 0) ... (dbsl 700 110706)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 UTF8 1 05C87968 05C8CF04 05C8C78C
C Detaching from DB Server (con_hdl=0,svchp=05C8C6D8,srvhp=05C9C464)
C Attaching to DB Server EC6 (con_hdl=0,svchp=05C8C6D8,svrhp=05C9C464)
C Starting user session (con_hdl=0,svchp=05C8C6D8,srvhp=05C9C464,usrhp=1F8E7360)
C *** ERROR => OCI-call 'OCISessionBegin' failed: rc = 1034
[dboci.c 4391]
C Detaching from DB Server (con_hdl=0,svchp=05C8C6D8,srvhp=05C9C464)
C *** ERROR => CONNECT failed with sql error '1034'
[dbsloci.c 10933]
C
C Thu Jul 10 00:09:47 2008
C Client NLS settings:
C Logon as OPS$-user to get SAPSR3's password
C Connecting as /@EC6 on connection 0 (nls_hdl 0) ... (dbsl 700 110706)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 UTF8 1 05C87968 05C8CF04 05C8C78C
C Attaching to DB Server EC6 (con_hdl=0,svchp=05C8C6D8,svrhp=05C9C464)
C Starting user session (con_hdl=0,svchp=05C8C6D8,srvhp=05C9C464,usrhp=1F8E7360)
C *** ERROR => OCI-call 'OCISessionBegin' failed: rc = 1034
[dboci.c 4391]
C Detaching from DB Server (con_hdl=0,svchp=05C8C6D8,srvhp=05C9C464)
C *** ERROR => CONNECT failed with sql error '1034'
[dbsloci.c 10933]
C Try to connect with default password
C Connecting as SAPSR3/<pwd>@EC6 on connection 0 (nls_hdl 0) ... (dbsl 700 110706)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 UTF8 1 05C87968 05C8CF04 05C8C78C
C Attaching to DB Server EC6 (con_hdl=0,svchp=05C8C6D8,svrhp=05C9C464)
C Starting user session (con_hdl=0,svchp=05C8C6D8,srvhp=05C9C464,usrhp=1F8E7360)
C *** ERROR => OCI-call 'OCISessionBegin' failed: rc = 1034
[dboci.c 4391]
C Detaching from DB Server (con_hdl=0,svchp=05C8C6D8,srvhp=05C9C464)
C *** ERROR => CONNECT failed with sql error '1034'
[dbsloci.c 10933]
C
C Thu Jul 10 00:09:52 2008
C Client NLS settings:
C Logon as OPS$-user to get SAPSR3's password
C Connecting as /@EC6 on connection 0 (nls_hdl 0) ... (dbsl 700 110706)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 UTF8 1 05C87968 05C8CF04 05C8C78C
C Attaching to DB Server EC6 (con_hdl=0,svchp=05C8C6D8,svrhp=05C9C464)
C Starting user session (con_hdl=0,svchp=05C8C6D8,srvhp=05C9C464,usrhp=1F8E7360)
C *** ERROR => OCI-call 'OCISessionBegin' failed: rc = 1034
[dboci.c 4391]
C Detaching from DB Server (con_hdl=0,svchp=05C8C6D8,srvhp=05C9C464)
C *** ERROR => CONNECT failed with sql error '1034'
[dbsloci.c 10933]
C Try to connect with default password
C Connecting as SAPSR3/<pwd>@EC6 on connection 0 (nls_hdl 0) ... (dbsl 700 110706)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 UTF8 1 05C87968 05C8CF04 05C8C78C
C Attaching to DB Server EC6 (con_hdl=0,svchp=05C8C6D8,svrhp=05C9C464)
C Starting user session (con_hdl=0,svchp=05C8C6D8,srvhp=05C9C464,usrhp=1F8E7360)
C *** ERROR => OCI-call 'OCISessionBegin' failed: rc = 1034
[dboci.c 4391]
C Detaching from DB Server (con_hdl=0,svchp=05C8C6D8,srvhp=05C9C464)
C *** ERROR => CONNECT failed with sql error '1034'
[dbsloci.c 10933]
B Reconnect failed for connection:
B 0: name = R/3, con_id = 000000000 state = DISCONNECTED, perm = YES, reco = YES, timeout = 000, con_max = 255, con_opt = 255, occ = NO
M *** WARNING => PfStatWrite: missing STAT_END for opcode STAT_REPLOAD [pfxxstat.c 4103]
B db_con_reconnect disconnecting connection:
B 0: name = R/3, con_id = 000000000 state = DISCONNECTED, perm = YES, reco = YES, timeout = 000, con_max = 255, con_opt = 255, occ = NO
B db_con_reconnect performing the reconnect for con:
B 0: name = R/3, con_id = 000000000 state = DISCONNECTED, perm = YES, reco = YES, timeout = 000, con_max = 255, con_opt = 255, occ = NO
C Client NLS settings:
C Logon as OPS$-user to get SAPSR3's password
C Connecting as /@EC6 on connection 0 (nls_hdl 0) ... (dbsl 700 110706)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 UTF8 1 05C87968 05C8CF04 05C8C78C
C Attaching to DB Server EC6 (con_hdl=0,svchp=05C8C6D8,svrhp=05C9C464)
C Starting user session (con_hdl=0,svchp=05C8C6D8,srvhp=05C9C464,usrhp=1F8E7360)
C *** ERROR => OCI-call 'OCISessionBegin' failed: rc = 1034
[dboci.c 4391]
C Detaching from DB Server (con_hdl=0,svchp=05C8C6D8,srvhp=05C9C464)
C *** ERROR => CONNECT failed with sql error '1034'
[dbsloci.c 10933]
C Try to connect with default password
C Connecting as SAPSR3/<pwd>@EC6 on connection 0 (nls_hdl 0) ... (dbsl 700 110706)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 UTF8 1 05C87968 05C8CF04 05C8C78C
C Attaching to DB Server EC6 (con_hdl=0,svchp=05C8C6D8,svrhp=05C9C464)
C
C Thu Jul 10 00:09:53 2008
C Starting user session (con_hdl=0,svchp=05C8C6D8,srvhp=05C9C464,usrhp=1F8E7360)
C *** ERROR => OCI-call 'OCISessionBegin' failed: rc = 1034
[dboci.c 4391]
C Detaching from DB Server (con_hdl=0,svchp=05C8C6D8,srvhp=05C9C464)
C *** ERROR => CONNECT failed with sql error '1034'
[dbsloci.c 10933]
C
C Thu Jul 10 00:09:58 2008
C Client NLS settings:
C Logon as OPS$-user to get SAPSR3's password
C Connecting as /@EC6 on connection 0 (nls_hdl 0) ... (dbsl 700 110706)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 UTF8 1 05C87968 05C8CF04 05C8C78C
C Attaching to DB Server EC6 (con_hdl=0,svchp=05C8C6D8,svrhp=05C9C464)
C Starting user session (con_hdl=0,svchp=05C8C6D8,srvhp=05C9C464,usrhp=1F8E7360)
C *** ERROR => OCI-call 'OCISessionBegin' failed: rc = 1034
[dboci.c 4391]
C Detaching from DB Server (con_hdl=0,svchp=05C8C6D8,srvhp=05C9C464)
C *** ERROR => CONNECT failed with sql error '1034'
[dbsloci.c 10933]
C Try to connect with default password
C Connecting as SAPSR3/<pwd>@EC6 on connection 0 (nls_hdl 0) ... (dbsl 700 110706)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 UTF8 1 05C87968 05C8CF04 05C8C78C
C Attaching to DB Server EC6 (con_hdl=0,svchp=05C8C6D8,svrhp=05C9C464)
C Starting user session (con_hdl=0,svchp=05C8C6D8,srvhp=05C9C464,usrhp=1F8E7360)
C *** ERROR => OCI-call 'OCISessionBegin' failed: rc = 1034
[dboci.c 4391]
C Detaching from DB Server (con_hdl=0,svchp=05C8C6D8,srvhp=05C9C464)
C *** ERROR => CONNECT failed with sql error '1034'
[dbsloci.c 10933]
C
C Thu Jul 10 00:10:03 2008
C Client NLS settings:
C Logon as OPS$-user to get SAPSR3's password
C Connecting as /@EC6 on connection 0 (nls_hdl 0) ... (dbsl 700 110706)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 UTF8 1 05C87968 05C8CF04 05C8C78C
C Attaching to DB Server EC6 (con_hdl=0,svchp=05C8C6D8,svrhp=05C9C464)
C Starting user session (con_hdl=0,svchp=05C8C6D8,srvhp=05C9C464,usrhp=1F8E7360)
C *** ERROR => OCI-call 'OCISessionBegin' failed: rc = 1034
[dboci.c 4391]
C Detaching from DB Server (con_hdl=0,svchp=05C8C6D8,srvhp=05C9C464)
C *** ERROR => CONNECT failed with sql error '1034'
[dbsloci.c 10933]
C Try to connect with default password
C Connecting as SAPSR3/<pwd>@EC6 on connection 0 (nls_hdl 0) ... (dbsl 700 110706)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 UTF8 1 05C87968 05C8CF04 05C8C78C
C Attaching to DB Server EC6 (con_hdl=0,svchp=05C8C6D8,svrhp=05C9C464)
C Starting user session (con_hdl=0,svchp=05C8C6D8,srvhp=05C9C464,usrhp=1F8E7360)
C *** ERROR => OCI-call 'OCISessionBegin' failed: rc = 1034
[dboci.c 4391]
C Detaching from DB Server (con_hdl=0,svchp=05C8C6D8,srvhp=05C9C464)
C *** ERROR => CONNECT failed with sql error '1034'
[dbsloci.c 10933]
B Reconnect failed for connection:
B 0: name = R/3, con_id = 000000000 state = DISCONNECTED, perm = YES, reco = YES, timeout = 000, con_max = 255, con_opt = 255, occ = NO
M *** ERROR => ThHdlReconnect: db_reconnect failed (2048) [thxxhead.c 16655]
B db_con_reconnect disconnecting connection:
B 0: name = R/3, con_id = 000000000 state = DISCONNECTED, perm = YES, reco = YES, timeout = 000, con_max = 255, con_opt = 255, occ = NO
B db_con_reconnect performing the reconnect for con:
B 0: name = R/3, con_id = 000000000 state = DISCONNECTED, perm = YES, reco = YES, timeout = 000, con_max = 255, con_opt = 255, occ = NO
C Client NLS settings:
C Logon as OPS$-user to get SAPSR3's password
C Connecting as /@EC6 on connection 0 (nls_hdl 0) ... (dbsl 700 110706)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 UTF8 1 05C87968 05C8CF04 05C8C78C
C Attaching to DB Server EC6 (con_hdl=0,svchp=05C8C6D8,svrhp=05C9C464)
C Starting user session (con_hdl=0,svchp=05C8C6D8,srvhp=05C9C464,usrhp=1F8E7360)
C *** ERROR => OCI-call 'OCISessionBegin' failed: rc = 1034
[dboci.c 4391]
C Detaching from DB Server (con_hdl=0,svchp=05C8C6D8,srvhp=05C9C464)
C *** ERROR => CONNECT failed with sql error '1034'
[dbsloci.c 10933]
C Try to connect with default password
C Connecting as SAPSR3/<pwd>@EC6 on connection 0 (nls_hdl 0) ... (dbsl 700 110706)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 UTF8 1 05C87968 05C8CF04 05C8C78C
C Attaching to DB Server EC6 (con_hdl=0,svchp=05C8C6D8,svrhp=05C9C464)
C Starting user session (con_hdl=0,svchp=05C8C6D8,srvhp=05C9C464,usrhp=1F8E7360)
C *** ERROR => OCI-call 'OCISessionBegin' failed: rc = 1034
[dboci.c 4391]
C Detaching from DB Server (con_hdl=0,svchp=05C8C6D8,srvhp=05C9C464)
C *** ERROR => CONNECT failed with sql error '1034'
[dbsloci.c 10933]
C
C Thu Jul 10 00:10:08 2008
C Client NLS settings:
C Logon as OPS$-user to get SAPSR3's password
C Connecting as /@EC6 on connection 0 (nls_hdl 0) ... (dbsl 700 110706)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 UTF8 1 05C87968 05C8CF04 05C8C78C
C Attaching to DB Server EC6 (con_hdl=0,svchp=05C8C6D8,svrhp=05C9C464)
C Starting user session (con_hdl=0,svchp=05C8C6D8,srvhp=05C9C464,usrhp=1F8E7360)
C *** ERROR => OCI-call 'OCISessionBegin' failed: rc = 1034
[dboci.c 4391]
C Detaching from DB Server (con_hdl=0,svchp=05C8C6D8,srvhp=05C9C464)
C *** ERROR => CONNECT failed with sql error '1034'
[dbsloci.c 10933]
C Try to connect with default password
C Connecting as SAPSR3/<pwd>@EC6 on connection 0 (nls_hdl 0) ... (dbsl 700 110706)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 UTF8 1 05C87968 05C8CF04 05C8C78C
C Attaching to DB Server EC6 (con_hdl=0,svchp=05C8C6D8,svrhp=05C9C464)
C Starting user session (con_hdl=0,svchp=05C8C6D8,srvhp=05C9C464,usrhp=1F8E7360)
C *** ERROR => OCI-call 'OCISessionBegin' failed: rc = 1034
[dboci.c 4391]
C Detaching from DB Server (con_hdl=0,svchp=05C8C6D8,srvhp=05C9C464)
C *** ERROR => CONNECT failed with sql error '1034'
[dbsloci.c 10933]
C
C Thu Jul 10 00:10:13 2008
C Client NLS settings:
C Logon as OPS$-user to get SAPSR3's password
C Connecting as /@EC6 on connection 0 (nls_hdl 0) ... (dbsl 700 110706)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 UTF8 1 05C87968 05C8CF04 05C8C78C
C Attaching to DB Server EC6 (con_hdl=0,svchp=05C8C6D8,svrhp=05C9C464)
C Starting user session (con_hdl=0,svchp=05C8C6D8,srvhp=05C9C464,usrhp=1F8E7360)
C *** ERROR => OCI-call 'OCISessionBegin' failed: rc = 1034
[dboci.c 4391]
C Detaching from DB Server (con_hdl=0,svchp=05C8C6D8,srvhp=05C9C464)
C *** ERROR => CONNECT failed with sql error '1034'
[dbsloci.c 10933]
C Try to connect with default password
C Connecting as SAPSR3/<pwd>@EC6 on connection 0 (nls_hdl 0) ... (dbsl 700 110706)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 UTF8 1 05C87968 05C8CF04 05C8C78C
C Attaching to DB Server EC6 (con_hdl=0,svchp=05C8C6D8,svrhp=05C9C464)
C
C Thu Jul 10 00:10:14 2008
C Starting user session (con_hdl=0,svchp=05C8C6D8,srvhp=05C9C464,usrhp=1F8E7360)
C *** ERROR => OCI-call 'OCISessionBegin' failed: rc = 1034
[dboci.c 4391]
C Detaching from DB Server (con_hdl=0,svchp=05C8C6D8,srvhp=05C9C464)
C *** ERROR => CONNECT failed with sql error '1034'
[dbsloci.c 10933]
B Reconnect failed for connection:
B 0: name = R/3, con_id = 000000000 state = DISCONNECTED, perm = YES, reco = YES, timeout = 000, con_max = 255, con_opt = 255, occ = NO
M *** ERROR => ThHdlReconnect: db_reconnect failed (2048) [thxxhead.c 16655]
B
B Thu Jul 10 00:10:29 2008
B db_con_reconnect disconnecting connection:
B 0: name = R/3, con_id = 000000000 state = DISCONNECTED, perm = YES, reco = YES, timeout = 000, con_max = 255, con_opt = 255, occ = NO
B db_con_reconnect performing the reconnect for con:
B 0: name = R/3, con_id = 000000000 state = DISCONNECTED, perm = YES, reco = YES, timeout = 000, con_max = 255, con_opt = 255, occ = NO
C Client NLS settings:
C Logon as OPS$-user to get SAPSR3's password
C Connecting as /@EC6 on connection 0 (nls_hdl 0) ... (dbsl 700 110706)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 UTF8 1 05C87968 05C8CF04 05C8C78C
C Attaching to DB Server EC6 (con_hdl=0,svchp=05C8C6D8,svrhp=05C9C464)
C
C Thu Jul 10 00:10:30 2008
C Starting user session (con_hdl=0,svchp=05C8C6D8,srvhp=05C9C464,usrhp=1F8E7360)
C *** ERROR => OCI-call 'OCISessionBegin' failed: rc = 1034
[dboci.c 4391]
C Detaching from DB Server (con_hdl=0,svchp=05C8C6D8,srvhp=05C9C464)
C *** ERROR => CONNECT failed with sql error '1034'
[dbsloci.c 10933]
C Try to connect with default password
C Connecting as SAPSR3/<pwd>@EC6 on connection 0 (nls_hdl 0) ... (dbsl 700 110706)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 UTF8 1 05C87968 05C8CF04 05C8C78C
C Attaching to DB Server EC6 (con_hdl=0,svchp=05C8C6D8,svrhp=05C9C464)
C Starting user session (con_hdl=0,svchp=05C8C6D8,srvhp=05C9C464,usrhp=1F8E7360)
C *** ERROR => OCI-call 'OCISessionBegin' failed: rc = 1034
[dboci.c 4391]
C Detaching from DB Server (con_hdl=0,svchp=05C8C6D8,srvhp=05C9C464)
C *** ERROR => CONNECT failed with sql error '1034'
[dbsloci.c 10933]
C
C Thu Jul 10 00:10:35 2008
C Client NLS settings:
C Logon as OPS$-user to get SAPSR3's password
C Connecting as /@EC6 on connection 0 (nls_hdl 0) ... (dbsl 700 110706)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 UTF8 1 05C87968 05C8CF04 05C8C78C
C Attaching to DB Server EC6 (con_hdl=0,svchp=05C8C6D8,svrhp=05C9C464)
C Starting user session (con_hdl=0,svchp=05C8C6D8,srvhp=05C9C464,usrhp=1F8E7360)
C *** ERROR => OCI-call 'OCISessionBegin' failed: rc = 1034
[dboci.c 4391]
C Detaching from DB Server (con_hdl=0,svchp=05C8C6D8,srvhp=05C9C464)
C *** ERROR => CONNECT failed with sql error '1034'
[dbsloci.c 10933]
C Try to connect with default password
C Connecting as SAPSR3/<pwd>@EC6 on connection 0 (nls_hdl 0) ... (dbsl 700 110706)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 UTF8 1 05C87968 05C8CF04 05C8C78C
C Attaching to DB Server EC6 (con_hdl=0,svchp=05C8C6D8,svrhp=05C9C464)
C Starting user session (con_hdl=0,svchp=05C8C6D8,srvhp=05C9C464,usrhp=1F8E7360)
C *** ERROR => OCI-call 'OCISessionBegin' failed: rc = 1034
[dboci.c 4391]
C Detaching from DB Server (con_hdl=0,svchp=05C8C6D8,srvhp=05C9C464)
C *** ERROR => CONNECT failed with sql error '1034'
[dbsloci.c 10933]
C
C Thu Jul 10 00:10:40 2008
C Client NLS settings:
C Logon as OPS$-user to get SAPSR3's password
C Connecting as /@EC6 on connection 0 (nls_hdl 0) ... (dbsl 700 110706)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 UTF8 1 05C87968 05C8CF04 05C8C78C
C Attaching to DB Server EC6 (con_hdl=0,svchp=05C8C6D8,svrhp=05C9C464)
C Starting user session (con_hdl=0,svchp=05C8C6D8,srvhp=05C9C464,usrhp=1F8E7360)
C *** ERROR => OCI-call 'OCISessionBegin' failed: rc = 1034
[dboci.c 4391]
C Detaching from DB Server (con_hdl=0,svchp=05C8C6D8,srvhp=05C9C464)
C *** ERROR => CONNECT failed with sql error '1034'
[dbsloci.c 10933]
C Try to connect with default password
C Connecting as SAPSR3/<pwd>@EC6 on connection 0 (nls_hdl 0) ... (dbsl 700 110706)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 UTF8 1 05C87968 05C8CF04 05C8C78C
C Attaching to DB Server EC6 (con_hdl=0,svchp=05C8C6D8,svrhp=05C9C464)
C Starting user session (con_hdl=0,svchp=05C8C6D8,srvhp=05C9C464,usrhp=1F8E7360)
C *** ERROR => OCI-call 'OCISessionBegin' failed: rc = 1034
[dboci.c 4391]
C Detaching from DB Server (con_hdl=0,svchp=05C8C6D8,srvhp=05C9C464)
C *** ERROR => CONNECT failed with sql error '1034'
[dbsloci.c 10933]
B Reconnect failed for connection:
B 0: name = R/3, con_id = 000000000 state = DISCONNECTED, perm = YES, reco = YES, timeout = 000, con_max = 255, con_opt = 255, occ = NO
M *** ERROR => ThHdlReconnect: db_reconnect failed (2048) [thxxhead.c 16655]
B db_con_reconnect disconnecting connection:
B 0: name = R/3, con_id = 000000000 state = DISCONNECTED, perm = YES, reco = YES, timeout = 000, con_max = 255, con_opt = 255, occ = NO
B db_con_reconnect performing the reconnect for con:
B 0: name = R/3, con_id = 000000000 state = DISCONNECTED, perm = YES, reco = YES, timeout = 000, con_max = 255, con_opt = 255, occ = NO
C Client NLS settings:
C Logon as OPS$-user to get SAPSR3's password
C Connecting as /@EC6 on connection 0 (nls_hdl 0) ... (dbsl 700 110706)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 UTF8 1 05C87968 05C8CF04 05C8C78C
C Attaching to DB Server EC6 (con_hdl=0,svchp=05C8C6D8,svrhp=05C9C464)
C Starting user session (con_hdl=0,svchp=05C8C6D8,srvhp=05C9C464,usrhp=1F8E7360)
C *** ERROR => OCI-call 'OCISessionBegin' failed: rc = 1034
[dboci.c 4391]
C Detaching from DB Server (con_hdl=0,svchp=05C8C6D8,srvhp=05C9C464)
C *** ERROR => CONNECT failed with sql error '1034'
[dbsloci.c 10933]
C Try to connect with default password
C Connecting as SAPSR3/<pwd>@EC6 on connection 0 (nls_hdl 0) ... (dbsl 700 110706)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 UTF8 1 05C87968 05C8CF04 05C8C78C
C Attaching to DB Server EC6 (con_hdl=0,svchp=05C8C6D8,svrhp=05C9C464)
C Starting user session (con_hdl=0,svchp=05C8C6D8,srvhp=05C9C464,usrhp=1F8E7360)
C
C Thu Jul 10 00:10:41 2008
C *** ERROR => OCI-call 'OCISessionBegin' failed: rc = 1034
[dboci.c 4391]
C Detaching from DB Server (con_hdl=0,svchp=05C8C6D8,srvhp=05C9C464)
C *** ERROR => CONNECT failed with sql error '1034'
[dbsloci.c 10933]
C
C Thu Jul 10 00:10:46 2008
C Client NLS settings:
C Logon as OPS$-user to get SAPSR3's password
C Connecting as /@EC6 on connection 0 (nls_hdl 0) ... (dbsl 700 110706)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 UTF8 1 05C87968 05C8CF04 05C8C78C
C Attaching to DB Server EC6 (con_hdl=0,svchp=05C8C6D8,svrhp=05C9C464)
C Starting user session (con_hdl=0,svchp=05C8C6D8,srvhp=05C9C464,usrhp=1F8E7360)
C *** ERROR => OCI-call 'OCISessionBegin' failed: rc = 1034
[dboci.c 4391]
C Detaching from DB Server (con_hdl=0,svchp=05C8C6D8,srvhp=05C9C464)
C *** ERROR => CONNECT failed with sql error '1034'
[dbsloci.c 10933]
C Try to connect with default password
C Connecting as SAPSR3/<pwd>@EC6 on connection 0 (nls_hdl 0) ... (dbsl 700 110706)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 UTF8 1 05C87968 05C8CF04 05C8C78C
C Attaching to DB Server EC6 (con_hdl=0,svchp=05C8C6D8,svrhp=05C9C464)
C Starting user session (con_hdl=0,svchp=05C8C6D8,srvhp=05C9C464,usrhp=1F8E7360)
C *** ERROR => OCI-call 'OCISessionBegin' failed: rc = 1034
[dboci.c 4391]
C Detaching from DB Server (con_hdl=0,svchp=05C8C6D8,srvhp=05C9C464)
C *** ERROR => CONNECT failed with sql error '1034'
[dbsloci.c 10933]
C
C Thu Jul 10 00:10:51 2008
C Client NLS settings:
C Logon as OPS$-user to get SAPSR3's password
C Connecting as /@EC6 on connection 0 (nls_hdl 0) ... (dbsl 700 110706)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 UTF8 1 05C87968 05C8CF04 05C8C78C
C Attaching to DB Server EC6 (con_hdl=0,svchp=05C8C6D8,svrhp=05C9C464)
C Starting user session (con_hdl=0,svchp=05C8C6D8,srvhp=05C9C464,usrhp=1F8E7360)
C *** ERROR => OCI-call 'OCISessionBegin' failed: rc = 1034
[dboci.c 4391]
C Detaching from DB Server (con_hdl=0,svchp=05C8C6D8,srvhp=05C9C464)
C *** ERROR => CONNECT failed with sql error '1034'
[dbsloci.c 10933]
C Try to connect with default password
C Connecting as SAPSR3/<pwd>@EC6 on connection 0 (nls_hdl 0) ... (dbsl 700 110706)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 UTF8 1 05C87968 05C8CF04 05C8C78C
C Attaching to DB Server EC6 (con_hdl=0,svchp=05C8C6D8,svrhp=05C9C464)
C Starting user session (con_hdl=0,svchp=05C8C6D8,srvhp=05C9C464,usrhp=1F8E7360)
C *** ERROR => OCI-call 'OCISessionBegin' failed: rc = 1034
[dboci.c 4391]
C Detaching from DB Server (con_hdl=0,svchp=05C8C6D8,srvhp=05C9C464)
C *** ERROR => CONNECT failed with sql error '1034'
[dbsloci.c 10933]
B Reconnect failed for connection:
B 0: name = R/3, con_id = 000000000 state = DISCONNECTED, perm = YES, reco = YES, timeout = 000, con_max = 255, con_opt = 255, occ = NO
M *** ERROR => ThHdlReconnect: db_reconnect failed (2048) [thxxhead.c 16655]
B
B Thu Jul 10 00:11:29 2008
B db_con_reconnect disconnecting connection:
B 0: name = R/3, con_id = 000000000 state = DISCONNECTED, perm = YES, reco = YES, timeout = 000, con_max = 255, con_opt = 255, occ = NO
B db_con_reconnect performing the reconnect for con:
B 0: name = R/3, con_id = 000000000 state = DISCONNECTED, perm = YES, reco = YES, timeout = 000, con_max = 255, con_opt = 255, occ = NO
C Client NLS settings:
C Logon as OPS$-user to get SAPSR3's password
C Connecting as /@EC6 on connection 0 (nls_hdl 0) ... (dbsl 700 110706)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 UTF8 1 05C87968 05C8CF04 05C8C78C
C Attaching to DB Server EC6 (con_hdl=0,svchp=05C8C6D8,svrhp=05C9C464)
C
C Thu Jul 10 00:11:30 2008
C Starting user session (con_hdl=0,svchp=05C8C6D8,srvhp=05C9C464,usrhp=1F8E7360)
C *** ERROR => OCI-call 'OCISessionBegin' failed: rc = 1034
[dboci.c 4391]
C Detaching from DB Server (con_hdl=0,svchp=05C8C6D8,srvhp=05C9C464)
C *** ERROR => CONNECT failed with sql error '1034'
[dbsloci.c 10933]
C Try to connect with default password
C Connecting as SAPSR3/<pwd>@EC6 on connection 0 (nls_hdl 0) ... (dbsl 700 110706)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 UTF8 1 05C87968 05C8CF04 05C8C78C
C Attaching to DB Server EC6 (con_hdl=0,svchp=05C8C6D8,svrhp=05C9C464)
C Starting user session (con_hdl=0,svchp=05C8C6D8,srvhp=05C9C464,usrhp=14 ETW000 r3trans version 6.14 (release 700 - 18.09.06 - 09:35:00).
4 ETW000 unicode enabled version
4 ETW000 ===============================================
4 ETW000
4 ETW000 date&time : 10.07.2008 - 01:06:33
4 ETW000 control file: <no ctrlfile>
4 ETW000 R3trans was called as follows: r3trans -d
4 ETW000 trace at level 2 opened for a given file pointer
4 ETW000 [dev trc ,00000] Thu Jul 10 01:06:36 2008 7795 0.007795
4 ETW000 [dev trc ,00000] db_con_init called 23 0.007818
4 ETW000 [dev trc ,00000] create_con (con_name=R/3) 33 0.007851
4 ETW000 [dev trc ,00000] Loading DB library 'dboraslib.dll' ... 28 0.007879
4 ETW000 [dev trc ,00000] load shared library (dboraslib.dll), hdl 0 26757 0.034636
4 ETW000 [dev trc ,00000] using "C:\usr\sap\EC6\SYS\exe\uc\NTI386\dboraslib.dll"
4 ETW000 32 0.034668
4 ETW000 [dev trc ,00000] Library 'dboraslib.dll' loaded 12 0.034680
4 ETW000 [dev trc ,00000] function DbSlExpFuns loaded from library dboraslib.dll
4 ETW000 19 0.034699
4 ETW000 [dev trc ,00000] Version of 'dboraslib.dll' is "700.08", patchlevel (0.73)
4 ETW000 17051 0.051750
4 ETW000 [dev trc ,00000] function dsql_db_init loaded from library dboraslib.dll
4 ETW000 22 0.051772
4 ETW000 [dev trc ,00000] function dbdd_exp_funs loaded from library dboraslib.dll
4 ETW000 25 0.051797
4 ETW000 [dev trc ,00000] New connection 0 created 21 0.051818
4 ETW000 [dev trc ,00000] 0: name = R/3, con_id = -000000001 state = DISCONNECTED, perm = YES, reco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
4 ETW000 28 0.051846
4 ETW000 [dev trc ,00000] db_con_connect (con_name=R/3) 18 0.051864
4 ETW000 [dev trc ,00000] find_con_by_name found the following connection for reuse:
4 ETW000 18 0.051882
4 ETW000 [dev trc ,00000] 0: name = R/3, con_id = 000000000 state = DISCONNECTED, perm = YES, reco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
4 ETW000 24 0.051906
4 ETW000 [dev trc ,00000] CLIENT_ORACLE_HOME is not set as environment variable or
4 ETW000 DIR_CLIENT_ORAHOME is not set as profile parameter.
4 ETW000 assuming using instant client with unspecified location.
4 ETW000 1887 0.053793
4 ETW000 [dev trc ,00000] Oracle Client Version: '10.2.0.1.0' 39929 0.093722
4 ETW000 [dev trc ,00000] -->oci_initialize (con_hdl=0) 29 0.093751
4 ETW000 [dev trc ,00000] Client NLS settings: AMERICAN_AMERICA.UTF8 2402 0.096153
4 ETW000 [dev trc ,00000] Logon as OPS$-user to get SAPSR3's password 30 0.096183
4 ETW000 [dev trc ,00000] Connecting as /@EC6 on connection 0 (nls_hdl 0) ... (dbsl 700 110706)
4 ETW000 25 0.096208
4 ETW000 [dev trc ,00000] Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
4 ETW000 575 0.096783
4 ETW000 [dev trc ,00000] 0 UTF8 1 0243DD48 0244327C 02442B04
4 ETW000 116 0.096899
4 ETW000 [dev trc ,00000] Allocating service context handle for con_hdl=0 9004 0.105903
4 ETW000 [dev trc ,00000] Allocating server context handle 18 0.105921
4 ETW000 [dev trc ,00000] Attaching to DB Server EC6 (con_hdl=0,svchp=02442A50,svrhp=024542C4)
4 ETW000 45 0.105966
4 ETW000 [dev trc ,00000] Thu Jul 10 01:07:47 2008 71710744 71.816710
4 ETW000 [dev trc ,00000] Assigning server context 024542C4 to service context 02442A50
4 ETW000 48 71.816758
4 ETW000 [dev trc ,00000] Allocating user session handle 53 71.816811
4 ETW000 [dev trc ,00000] Starting user session (con_hdl=0,svchp=02442A50,srvhp=024542C4,usrhp=0248F930)
4 ETW000 55 71.816866
4 ETW000 [dboci.c ,00000] *** ERROR => OCI-call 'OCISessionBegin' failed: rc = 1034
4 ETW000 38748 71.855614
4 ETW000 [dev trc ,00000] server_detach(con_hdl=0,stale=1,svrhp=024542C4) 15 71.855629
4 ETW000 [dev trc ,00000] Detaching from DB Server (con_hdl=0,svchp=02442A50,srvhp=024542C4)
4 ETW000 22 71.855651
4 ETW000 [dev trc ,00000] Deallocating server context handle 024542C4 941 71.856592
4 ETW000 [dbsloci. ,00000] *** ERROR => CONNECT failed with sql error '1034'
4 ETW000 56 71.856648
4 ETW000 [dev trc ,00000] Try to connect with default password 119 71.856767
4 ETW000 [dev trc ,00000] Connecting as SAPSR3/<pwd>@EC6 on connection 0 (nls_hdl 0) ... (dbsl 700 110706)
4 ETW000 21 71.856788
4 ETW000 [dev trc ,00000] Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
4 ETW000 23 71.856811
4 ETW000 [dev trc ,00000] 0 UTF8 1 0243DD48 0244327C 02442B04
4 ETW000 24 71.856835
4 ETW000 [dev trc ,00000] Allocating server context handle 12 71.856847
4 ETW000 [dev trc ,00000] Attaching to DB Server EC6 (con_hdl=0,svchp=02442A50,svrhp=024542C4)
4 ETW000 36 71.856883
4 ETW000 [dev trc ,00000] Thu Jul 10 01:07:48 2008 11514 71.868397
4 ETW000 [dev trc ,00000] Assigning server context 024542C4 to service context 02442A50
4 ETW000 31 71.868428
4 ETW000 [dev trc ,00000] Assigning username to user session 0248F930 17 71.868445
4 ETW000 [dev trc ,00000] Assigning password to user session 0248F930 23 71.868468
4 ETW000 [dev trc ,00000] Starting user session (con_hdl=0,svchp=02442A50,srvhp=024542C4,usrhp=0248F930)
4 ETW000 22 71.868490
4 ETW000 [dboci.c ,00000] *** ERROR => OCI-call 'OCISessionBegin' failed: rc = 1034
4 ETW000 30319 71.898809
4 ETW000 [dev trc ,00000] server_detach(con_hdl=0,stale=1,svrhp=024542C4) 15 71.898824
4 ETW000 [dev trc ,00000] Detaching from DB Server (con_hdl=0,svchp=02442A50,srvhp=024542C4)
4 ETW000 31 71.898855
4 ETW000 [dev trc ,00000] Deallocating server context handle 024542C4 927 71.899782
4 ETW000 [dbsloci. ,00000] *** ERROR => CONNECT failed with sql error '1034'
4 ETW000 41 71.899823
4 ETW000 [dblink ,00431] ***LOG BY2=>sql error 1034 performing CON [dblink#3 @ 431]
4 ETW000 7115 71.906938
4 ETW000 [dblink ,00431] ***LOG BY0=>ORA-01034: ORACLE not available 20 71.906958
4 ETW000 ORA-27101: shared memory realm does not exist [dblink#3 @ 431]
2EETW169 no connect possible: "DBMS = ORACLE --- dbs_ora_tnsname = 'EC6'"
Edited by: moazam hai on Jul 9, 2008 9:40 PM -
Is possible to connect as system/manager automatically???
Hi,
I have any problems
I have a package with two procedures (MT_PROC and SEN_MAIL) the first call to second.
The first run in system/manager and in myuser/password, while the second run just in system/manager.
Is possibile run the package in myuser/password and after connect to system/manager automatically inside the package????
thanks
RaffaeleIdeally if you create a public synonym for the package and grant the 'execute' previlege to the user then it should work fine.
-
ABAP code to connect 2 systems.
Hi,
My requirement is such that I need to read the data from a cube of one BI system and write it into the cube of another BI system.
I am able to read the cube data through "RSDRI_INFOPROV_READ" function module.
2 questions:
1) Is the above solution possible?
2) Is there ABAP code to connect 2 systems?
Please help with some suggestions.
Thanks,
PankajYou can call function modules in other systems using RFC - so you probably need to create a RFC wrapper function module for your 'RSDRI_INFOPROV_READ'. Then you can create/look up a RFC destination for the other system using SM59.
All you have to do to call a RFC function in another system, is to add the destination to the function call (if the destination is setup up right):
CALL FUNCTION 'ZRSDRI_INFOPROV_READ'
DESTINATION 'DEST_NAME' -
Change a migrated DataSource for DB Connect Source System
Hi,
I have created a DataSource for a DB connect Source system with transactioncode RSDBC as follows:
1. select database TableView
2. choose Edit DataSource
3. fill in the field Application Component (default stated NODESNOTCONNECTED)
4. generate datasource
Result: the datasource has been created in the right application component. As I want to migrate to BW 7 I have migrated the datasource (with export) and afterwards activated it. Now we need to add more fields to the database TableView. After the fields have been added I want to make these fields also available in the DataSource created before.
How can I do this ?
When using transaction code RSDBC I found out that the application component is stated again NODESNOTCONNECTED instead of the application component filled before. Is it possible that changes in the TableView will always lead to create the DataSource all over again (new InfoPackage, new Transformation rules, new DTP).
Thank you in advance for your help. Kind regards, MinouschkaHello,
We have basically the same problem. An existing data source from a DB-connect client and now need to add a new field but edit mode BW does not provide the ability to add or delete existing fields.
Were you able to complete this and if so how did you do it?
Thank you,
Rick -
Sharing an extractor with another BW system possible?
Dear all,
We currently run BW3.1. Now we would like to install NW2004s next to it.
Is it possible to use the same extractor with delta loads when you have only 1 source system with 2 BW systems?
Do both BW systems contain all information after delta loads?
Thanks in advance,
RalphHi,
Yes, its possible. You can have just one source system, feeding multiple BW systems. But in your case, I'll be careful as you are trying to upload data to 2 different versions of the BW system. You have to check and test for the PI versions on the R3 side. Your current set of PI versions on R3 will have to be upgraded if you are planning to connect the system with the netweaver 04s version. Once you upgrade, you also need to make sure that the data loads work fine with your older BW version as well.
Cheers,
Kedar -
Dúvida - NF-e: Maintain Connected Authority Systems - layout 3.10
Boa noite!
Estou realizando o customize da SPRO, porém notei que só posso inserir a seguinte entrada para um mesmo CNPJ:
Ou seja, quando tento colocar os demais estados o erro de chave duplicada é retornado devido aos campos logical system e Company's Own CNPJ. Dessa maneira, quando executo o novo programa de status de serviço (/XNFE/NFE_CHECK_SRV_STATUS) relalizando o debug noto que existe uma verificação durante a execução da função (/XNFE/SRVSTA_READ_CUST) na qual, por mais que eu tenha cadastro todos os cUF na spro que ficam registrados na tabela (/xnfe/tcuf) o status de serviço acaba sendo executado apenas para o que existe na tabela (/xnfe/govpar) alimentada pela configuração da NF-e: Maintain Connected Authority Systems da imagem que enviei posteriormente. Sendo assim só é executado o status de serviço para SP e não para todas as cUF que estão na atividade NF-e: Define Service Status Request for Authority (SEFAZ). Abaixo segue trecho do código que verifiquei que realiza esse controle no debug:
SELECT * FROM /xnfe/govpar INTO TABLE lt_govpar
WHERE doctype = iv_doctype.
*--- 2. Version determination
IF lt_govpar IS NOT INITIAL.
SELECT * FROM /xnfe/xmlversdet INTO TABLE lt_xmlversdet
FOR ALL ENTRIES IN lt_govpar
WHERE doctype = iv_doctype
AND logsys = lt_govpar-logsys
AND ( cnpj = lt_govpar-cnpj
OR cnpj = ' ' )
AND messtype = iv_messtype.
*--- 3. Service status check parameter
SELECT * FROM /xnfe/tcuf INTO TABLE lt_tcuf.
LOOP AT lt_govpar ASSIGNING <ls_govpar>.
*--- Get corresponding entry from version determination
READ TABLE lt_xmlversdet WITH KEY doctype = <ls_govpar>-doctype
logsys = <ls_govpar>-logsys
cnpj = <ls_govpar>-cnpj
ASSIGNING <ls_xmlversdet>.
IF sy-subrc <> 0.
*--- If nothing is found try with blank CNPJ
READ TABLE lt_xmlversdet WITH KEY doctype = <ls_govpar>-doctype
logsys = <ls_govpar>-logsys
cnpj = ' '
ASSIGNING <ls_xmlversdet>.
ENDIF.
IF sy-subrc IS INITIAL.
*--- Get corresponding entry for service status check parameter
READ TABLE lt_tcuf WITH KEY doctype = <ls_govpar>-doctype
cuf = <ls_govpar>-cuf
ASSIGNING <ls_tcuf>.
IF sy-subrc IS INITIAL.
ls_stacheck-cuf = <ls_govpar>-cuf.
ls_stacheck-tpamb = <ls_govpar>-tpamb.
ls_stacheck-xmlvers = <ls_xmlversdet>-xmlvers.
ls_stacheck-sscperiod = <ls_tcuf>-sscperiod.
ls_stacheck-tzone = <ls_tcuf>-tzone.
ls_stacheck-respcont = <ls_tcuf>-respcont.
ls_stacheck-checkcont = <ls_tcuf>-checkcont.
APPEND ls_stacheck TO et_stacheck.
ENDIF.
ENDIF.
CLEAR: ls_stacheck.
ENDLOOP.
ENDIF.
Sendo assim, como faço para que na atividade NF-e: Maintain Connected Authority Systems eu possa inserir todos os cUF com para os quais executarei o status de serviço e posteriormente enviarei notas?
Obrigado.,Bom dia Luís,
Exatamente! De fato o que ocorreu foi uma confusão, pois na versão anterior era possível enviar o status de serviço mesmo se você não possuísse uma filial para o estado em questão. Quando fui fazer a migração do cliente todos os estados estavam configurados para emitir status de serviço, porém não há necessidade de enviar o status de serviço para um estado visto que você não possui uma filial para emissão de Nota no mesmo.
Abs., -
NF-e: Maintain Connected Authority Systems - Já existe uma entrada com a mesma chave
Bom dia!
Estou tendo um problema para adicionar novas entradas na SPRO - OUTBOUND -NF-e: Maintain Connected Authority Systems para configuração do layout 3.10:
Sendo assim, como devo configurar todos os estados para a SEFAZ se o sistema lógico e CNPJ são chaves da tabela /xnfe/govpar?
Com isso, não consigo executar todos os status de serviço no layout novo através do report (/XNFE/NFE_CHECK_SRV_STATUS) depois de cadastrálos na atividade NF-e: Define Service Status Request for Authority (SEFAZ,) pois durante a execução do report (/XNFE/NFE_CHECK_SRV_STATUS) além da tabela /xnfe/tcuf a tabela /xnfe/govpar também é verificada.
Grato.,Bom dia Luís,
Exatamente! De fato o que ocorreu foi uma confusão, pois na versão anterior era possível enviar o status de serviço mesmo se você não possuísse uma filial para o estado em questão. Quando fui fazer a migração do cliente todos os estados estavam configurados para emitir status de serviço, porém não há necessidade de enviar o status de serviço para um estado visto que você não possui uma filial para emissão de Nota no mesmo.
Abs., -
DB connect source system creation in BI
Hi,
I would like to create a DB connect source system to an external MSSQL 2005 database in RSA1.
The external MSSQL 2005 database is setup using Windows Authentication mode.
Question: Which user actually should I specify when creating the source system in RSA1? or which user should I assign the db_ddladmin role in the external MSSQL database?
Many thanks,
YJ.Hi,
Please note the following with regard to the user:
To avoid problems loading data, proceed as follows:
1. Create a special login for the extraction. You should add this login to the db_ddladmin database role in the
corresponding database. This generates a similar DB user at database level. The user you use must have the 'CREATE VIEW'
authorization at least. This is contained in the role mentioned above.
2. For the extraction, you should only use DB views that were created under this DB user. (refer also to type conversion, naming
convention and so on)
3. Assign the necessary authorizations (SELECT at least) to the selected user in the source tables, or the columns of these tables.
4. Use the specially created login in the logon information when you set up the DB source system in BW.
You will find much more detailed information on how to setup the connection and known problems and issues in the
attached note 512739.
Best Regards,
Des. -
Hi,
can anybody help me solving this problem:
I have Business-Systems connected to XI by RFC-Adapter. Everything works fine. Now I want to upgrade some of these Business-Systems to a newer Release --> RFCs are changing! (For both Releases I have separate Developing-Systems)
Does the following work?
- Creating a new Product-Version
- Creating new Software-Component-Versions for the new Product-Version
- Creating Namespaces with the same names (as in the older Software-Component-Versions)
- Tools/Release-Takeover for every Software-Component
- Connecting Develop-System of the new Release to the new Software-Components (Interface-Import of RFCs)--> in the new Software-Components only new RFCs can be uploaded.
- Business-Systems with old Release keep connected with old Product-Version. Business-Systems with new Release are connected with new Product-Version.
Does it work? Is this the best approach or are there other possibilities?
Thanks in advance,
Max.Hey
are u suppose to do an IDOC(R/3 system A)-Xi-IDOC(R/3 system B) scenario,of u have to collect IDOC's from both the R/3 systems and send it to a single file?
in any case u have to maintain separate Business system and logical system name for both R/3 systems
thanx
ahmad
Message was edited by:
Ahmad -
Error when connecting to system
Hi,
I have been off topic for quite a while and when I wanted to pick up today, I couldn't connect to the HANA server anymore. I haven't changed any settings since last setup, all I get is the "Error when connecting to system" in the Quick Lauch of the infornation modeler.
Any suggestions?
THX
MarkusHello,
did you connect since upgrade to SP03?
You might be looking for this thread.
SAP In-Memory Developer Center - planned downtime 2011-11-15, 10-11am PST
Tomas -
Connecting external systems via JMS
Hello there!
I have this ATG MessageSink component connected on a sqldms queue named /integration/CustomerQueue, what is the best approach for connecting external system (like a standalone .jar) on ATG sqldms Messaging System, to post a message on this sqldms queue?
<message-sink>
<nucleus-name>
/integration/jms/sink/CustomerMessageSink
</nucleus-name>
<input-port>
<input-destination>
<provider-name>
sqldms
</provider-name>
<destination-name>
sqldms:/integration/CustomerQueue
</destination-name>
<destination-type>
Queue
</destination-type>
</input-destination>
</input-port>
</message-sink>
Thanks!Resolved.
I just created a ConnectionFactory and a Queue on Weblogic, than I created a JMSProvider on ATG and registered on dynamoMessagingSystem.xml:
Create a JNDI Reference for the ConnectionFactory created on WLS: /atg/dynamo/messaging/WeblogicJMSProvider
$class=atg.nucleus.JNDIReference
JNDIName=jms.ConnectionFactory
Register a Provider on: /atg/dynamo/messaging/dynamoMessagingSystem.xml
<!-- ============================================================== -->
<!-- ====================WEBLOGIC PROVIDER========================= -->
<!-- ============================================================== -->
<provider>
<provider-name>
weblogic
</provider-name>
<topic-connection-factory-name>
dynamo:/atg/dynamo/messaging/WeblogicJMSProvider
</topic-connection-factory-name>
<queue-connection-factory-name>
dynamo:/atg/dynamo/messaging/WeblogicJMSProvider
</queue-connection-factory-name>
<xa-topic-connection-factory-name>
dynamo:/atg/dynamo/messaging/WeblogicJMSProvider
</xa-topic-connection-factory-name>
<xa-queue-connection-factory-name>
dynamo:/atg/dynamo/messaging/WeblogicJMSProvider
</xa-queue-connection-factory-name>
<supports-transactions>
true
</supports-transactions>
<supports-xa-transactions>
false
</supports-xa-transactions>
</provider>
And finally create a MessageSink or MessageSource pointing the provider-name for weblogic
<message-sink>
<nucleus-name>
/integration/jms/sink/CustomerMessageSink
</nucleus-name>
<input-port>
<input-destination>
<provider-name>
weblogic
</provider-name>
<destination-name>
Integrations.CustomerQueue
</destination-name>
<destination-type>
Queue
</destination-type>
</input-destination>
</input-port>
</message-sink> -
Integrate or connect SAP system to non-SAP system
Hi All,
We need to connect SAP system or integrate inspHire rental software to SAP. Do you know the process or initial summary on how to integrate this one?
As of now, the only way that we know to integrate SAP to non-SAP for posting is thru LSMW and batch input.
your suggestions will be greatly appreciated.Hi,
LSMW is just tools for integration and you can use BDC Call Transaction, BDC session or BAPI, or Function to update something ins SAP.
1/Easier is if your non-SAP system is able to create file and ftp to SAP folder.
2/You will have background job running program that will every 5minutes or hour or daily(it is up to you how fast dat has to be bring to SAP) check if file was create in SAP folder.
3/Program will move file to folder in process
4/Program will process file, usinf function, or call transaction to update SAP on the base of file
5/Program will move file to process folder
If you need more info give me detail about what you would like to update in SAP and I could send you code.
Bye Jan -
Are DB connect source systems also created in SM59 or just directly in RSA1? Thanks
Check out the following Links
http://help.sap.com/saphelp_nw04/helpdata/en/58/54f9c1562d104c9465dabd816f3f24/content.htm
Step by step guide.
http://www.slideshare.net/blackwhites/sap-bw-connect-db
Maybe you are looking for
-
Create image of XSTRING data and display it in Web Dynpro
Hello, I am trying to dynamically display an image in a Web Dynpro ABAP Image-Control. The problem is that the data is stored in the DB as XSTRING and I can't find a Method for example to create a new object in the MIME-Repository of the data which i
-
PL/SQL error in JSP Reports
Hi, I am trying to create a simple PL/SQL in a JSP report thar returns a column's value as below: Return :RES_COM_CODE ; I am getting an error as below: javax.servlet.jsp.JspException: REP-0724: Cannot get the value of Column 'RES_COM_CODE' here. REP
-
Count the number of records in a group
Hi , My requirement is to display in the BI reprt - records in Order Entry Line Items based on several conditions on the fields. If the above conditions do not returm any records ,show an error message - NO DATA FOUND. 1.checked in standard RTF templ
-
Amaya 8.3-1 won't start, still. :)
I already posted this to the bug reports, but wanted to bring it up here to see if there was anyone else experiencing this problem, or if anyone had a fix: http://bugs.archlinux.org/index.php?do=details&id=680 On trying to run amaya from xfce termina
-
Hello, Great to hear from anyone who has created a non-ABAP process type and included in the process chain. The interface methods and how they get called and/or check status etc. are not documented or at least I cannot find them. Thanks Mathew