No Connection to Target Component while configuring Transaction Launcher

Hi All,
I was trying to launch a custom BW TCODE from the CRM system using Transaction Launcher.
While configuring it, at the step where we mention the Logical system name, BOR Object Type and Method name, I get a message like 'No Connection BW Client XXX maintained'.
I checked in SPRO under following path and it is maintained
SAP Implementation Guide->SAP Web Application Server->Business Intelligence->
Links to Other Source Systems->General Connection Settings->General Connection Settings.
Is there any other place I need to maintain this.
Regards,
Masood Imrani S.

Hi ,
Check the table TBLSYSDEST. Logica system entery for BW system is there or not. If not make entery for logical system.
Check also have u already maintain or not entery in CRMC_IC_CROSS_SYS transaction for ur BW System.
Thanks & Regards
Gaurav

Similar Messages

Configure transaction launcher

Dear experts
I create a new entry to launch GUI transaction in the transaction launcher wizard. Step 3 - Define further technical details - I enter:
Transaction Type = BOR Transaction
Logical System = <My ECC system>
BOR Object Type = ??? When pressing F4, the error message: No connection to <My ECC system> is displayed.
What should I do?
Thanks in advance
Stephanie

Thanks Pankaj. Yes, we managed to fix this basis issue. I was able to finish the configuration in transaction launcher wizard. But in CRM WebClient, when I select this entry (Display ECC Quotation), I can see the system is trying to do something - a new windows starts to open and then closes quickly ....
We've just upgraded our CRM 4.0 to CRM 6.0. The display ECC quotation action is available in CIC0 and I wanted to use the same BOR method to make this action available in CRM WebClient as well.
Below are my transaction launcher settings:
Transaction Type: A BOR Transaction
Logical System: <MyECCsystem>
BOR Object Type: BUS2031
Method Name: DISPLAY
Any ideas why it's not working?
Thanks a lot in advance
Stephanie

Short Dump GETWA_NOT_ASSIGNED while calling Transaction launcher in IC_WEB

Hi Folks,
We have a problem with Transaction Launcher profile in IC web client , after support pack implementation when i launch few R/3 transaction in Web client profile getting short dump.
when i check ST22 transaction , i found these information in Dump.
!) Error in ABAP application program.
The current ABAP program "CL_CRM_IC_ABOX_ABSTRACT_URL===CP" had to be
terminated because one of the
statements could not be executed.
we came to know below method not executing properly .
CL_CRM_IC_ABOX_ABSTRACT_URL method IF_CRM_IC_ACTION_HANDLER~GET_ACTION_PROPERTY
and also for
CL_CRM_IC_ABOX_CONSTANTS => Object_type
Any could you please advice on the same ....
Regards
raju....

Hello Raju,
Please apply the note 1101443. This should help you resolve the issue.
Thanks and Regards,
Varsha

Not able to connect to the database while configuring the Hyperion Planning

Hi all,
I am trying to configure Hyperion Planning, i am getting error while connection to the database,
and i am not able to connect to the sqlserver management studio using sql server authentication mode, while installing sql server i selected as windows authentication mode,
here is my environment:
OS: Windows Vista
Database: MS SQL Server 2005, with Windows authentication mode
Hyperion9.3.1: Planning, Essbase server, shared services.
can anyone let me know what is the error? or do am i missing any step,
appreciate your help.
Thanks
Afjal

Hi,
First of all Vista is not supported as O/S for Hyperion server products, so if you encounter any problems it may be due to that.
It is possible to use windows authentication mode but some have problems with it and end up going down the sql server authentication route.
It is possible to change SQL server to mixed mode.
Cheers
John
http://john-goodwin.blogspot.com/

Transaction Launcher: Logical System in Production System does not change

Hi,
I created a transaction launcher in the CRM development system (CRD) to launch the transaction IL02 in the ECC 6.0 system (ECD). Then I transported the changes from CRD to the CRM production system CRP. I also transported the changes from ECD to ECC production system ECP.
However, when I see the transaction launcher in CRP system, it is still configured for the URL of ECD. I want the transaction launcher to connect to ECP. One option I have is to change the class name in the CRP system. However, I am not allowed to create a new ABAP class in the production system. Is there any other way to change the target system automatically in production system?
Thanks,
Rohan.

Thanks Piyush. Could you be a bit more specific? I followed these steps:
1. In transaction CRMS_IC_CROSS_SYS, created a logical system URL for production system
2. In customizing setting Copy/Delete Launch Transactions, deleted the transaction launcher id.
3. In customizing setting Configure Transaction Launcher, created the same transaction launcher id newly.
I still am not able to change the logical system. However, I can do it if I change the class name.
While deleting the transaction launcher id, should I be deleting all dependencies?
Regards,
Rohan.

Paramters empty when using Transaction launcher wizard for BOR Method

We have a u201CCRM 5.0 BOR method based - action boxu201D; that uses a R3 method, to pick the confirmed BP from CRM CIC and goes to R3 and finds a partner function for it. We are moving over to the navigation bar in CRM 7.0. We are using the transaction launcher wizard in CRM 7.0 to create a launch transaction for this action box. In the wizard we enter the following: 1) Name, Component set: u201CALLu201D; 2) Description and Custom Class name; 3) choose A BOR Transaction, choose the R/3 system we are connecting to and choose the appropriate BOR Object Type and Method Name. The problem is when we go to the next screen u2013 u201CTransaction Parametersu201D u2013 nothing shows up in the dropdown box.
From what weu2019ve read, we need to choose something here. Eventually we will have to go to the method u201Cif_crm_ic_action_handler~PREPARE_DATA_FLOWu201D in the class specified in the wizard and change to code to use the confirmed BP number. But first we need to choose the transaction parameter in the wizard. I think maybe we need to choose a component set on the Entries screen but there are a bunch of them and we have no idea which one is appropriate. It could also be a declaration in the method!!
We have checked the settings for the ZTSTC object, the ITS URLs, the RFCs and logical systems and came up with noting. These are the notes that we have checked: 1021222, 888931, 1337200 and 1337472.
Does anyone have an idea as to what we might be missing?

Hi Thea,
Yes, we were able to resolve the issue. This was resolved by one of our technical developers. This is how he resolved the issue:
STEP1: PARAMETER MAINTENANCE
1) You need to maintain method for the parameter
/SE80 -> Menu item - Workbench -> Edit object -> TAB - Business engineering -> FIELD Business object type = Ex: ZXXXX (Custom object) and open it.
2) Expand the Methods and focus your cursor on the method that you woud like to change Ex: ZXXX.ZYYY.
3) In the toolbar section push the PARAMETERS button.
4) Change to Edit mode nd hit CREATE. Select the table abd the field that you would like to pass as a parameter. In our case we selected Tabel KNA1 and field KUNNR. Hit the green check mark. Check the fields Import & Mandatory. Save and select your transport request.
STEP 2: USING PARAMETER IN TRANSACTION LAUNCHER WIZARD
5) While creating the launch transaction wizard, the paramter needs to be maintained.
IMG -> Customer Relationship Management -> UI Framework -> Technical Role Definition -> Technical Role Definition -> Configure Transaction Launcher.
6) Maintain the technical details of your launch transaction and then when you come to the Transaction Parameters section when you hit the dropdown you should now see the paramter that you maintained. In our case we had OBJECTGUID.
7) In the Value field hit F4. Here look for the right data context and the field that you would like to pass. In our case we selected: //datacontextCURRENTBT/BTOrderHeader/BTHeaderActivityExt/GUID. Complete the wizard.
STEP 3: CHANGE METHOD CREATED IN STEP 2
8) Find the Class that was created by the wizard and open the method: IF_CRM_IC_ACTION_HANDLER~PREPARE_DATA_FLOW
Change the follwing code:
me->set_container_data(
iv_name = delete gv_customer and insert the field that you added. In our case: 'KUNNR'
iv_value = CUSTOMER ).
Save and activate the method.
This should resolve the issue.

Transaction Launcher error in CRM 07

Hello Guys,
I am getting following execption when i try to configure transaction launcher in webUI 07. Any idea?
Cannot display view BSPWD_BASICS/WorkAreaHostViewSet
An exception has occurred Exception Class CX_BSP_WD_RUNTIME_ERROR - Component is not defined
Method: CL_BSP_WD_COMPONENT_DESCRIPTOR=>CONSTRUCTOR
Source Text Row: 26
Error occurred during navigation
An exception has occurred Exception Class CX_BSP_WD_RUNTIME_ERROR - View . could not be bound
Method: CL_BSP_WD_VIEW_CONTROLLER=>BIND_VIEW
Source Text Row: 162
Thanks,
Shubhangi

Hi Ashok,
> I checked the sm59 in CRM box. the RFC connection ( type 3) is configured for XI box (XI1CLNT100_RFC).
> In SXMB_ADM of CRM box the correspoinding integration server is 'dest://XI1CLNT100_RFC'.
XI adapter uses HTTP connection.So create RFC destination with Connection type H and following parameters
1 Connection Type: H
2 Target Host: System name
3 Service Number: HTTP Port name
4 Path Prefix: /sap/XI/engine/?type=entry
On the Logon/Security tab page, enter the following logon data:
1 User: XIAPPLUSER (for example); this user should represent the sending business system (see also the SAP XI Security Guide under Service Users for Message Exchange).
2 Password: the password you have specified for this user
3 Client: SAP XI Integration server
4 Language: Language required
and use this HTTP destination in TA - SXMB_ADM configuration.
Cheers,
Jag

Unable to access ECC transactions from CRM using Transaction Launcher

Hi Folks, we are trying to create a booking request using VA11 from portal. For this we have configured transaction launcher in CRM which will connect to ECC system from portal and VA11 screen will be launched. For this we have done the necessary configuration in transaction launcher (Including RFC destination and logical system) and this is working fine in Dev system but not in quality system. We are able to see SAP screen with toolbar Menu and System but not the entire transaction (refer image below). Our questions here are,
1)     What user type has to be configured when connecting from CRM to ECC? (System, Communication data or any ohter)
2)     If this has to work with user as Dialog, is there any supporting document from SAP saying this should be Dialog user?
3)     Is there any other issue and need development specifically related BOR TSTC?
Warm regards and thanks in advance for your time.
Prasad

Hello JC,
Yes, it is possible . You have to create new work center link or Direct Link for the existing transaction launcher.
Transaction Launcher
Regards,
Ashik

Open report using transaction launcher

Hi experts,
Can anyone guide me on how to open a report ( SE38 ) onto WEB UI using transaction launcher ??
Thanks,
Suchita

Hi Suchita,
The transaction Launcher can be used to launch URLs and BSPs / BOR transactions from other systems.
To launch a GUI transaction a BOR object type with a method EXECUTE, that supports synchronous calls is required.
1. A mapping of the logical systems is required: Transaction: CRMS_IC_CROSS_SYS
2. To launch a GUI transaction a BOR object type with a method EXECUTE, that supports synchronous calls is required.Transaction: SE80 > Workbench > Edit object
Copy BOR object type TSTC to ZTSTC
3. Set in the method EXECUTE the flag 'Synchronousu2018
4. Generate the object
5. Following steps are for the Transaction launcher wizard :
IMG:Customer Relationship Management > UI Framework > > Technical Role Definition > Configure Transaction Launcher
or transaction: CRMC_UI_ACTIONWZ
Enter an ID (donu2018t use the F4-help)
Enter a description
Enter a class name (donu2018t use the F4-help): ZCL_<name>
Flag u201AStatefulu2018, if the URL should be launched in a new window
Choose Transaction Type = BOR Transaction
Choose the BOR Object type you created
Choose EXECUTE
ChooseParameter: Object Key
Value: <transaction code>
IMG: Customer Relationship Management > UI Framework > Technical Role Definition > Define Navigation Bar Profile
Create an new Logical Link
Type: C Launch Transaction
Target ID: EXECLTX
Parameter class: CL_CRM_UI_LTX_NAVBAR_PARAM
IMG: Customer Relationship Management > UI Framework > Technical Role Definition > Define Navigation Bar Profile
Create a new Direct Link Group and assign the logical link to it
Assign the Direct Link Group to your Navigation Bar Profile
IMG: Customer Relationship Management > Business Role > Define Business Role > Set the link to visible
Hope this answers your question.
Regards,
Kapil

Open ERP transaction within CRM 2007 using wizard for transaction launcher

Hello everybody,
I am trying to launch a SAP ERP transaction within SAP CRM 2007 using the transaction launcher wizard.
First I maintained all necessary setting for the RFC connections (in ERP and CRM) using for example transaction SM59 and BD87, e.g. the master data replication is working fine. Second I created a business object type based on the SAP Standard business object TSTC and set the u201CExecuteu201D method to u201CSynchronousu201D in SAP ERP.
Afterwards I created the URL for our ITS server and started the transaction launcher in CRM. During the step u201CFurther technical detailsu201D I selected as transaction type u201CBOR transactionu201D and chose our logical system (ERP) and added our newly created BOR object type as well as the method u201CExecuteu201D. If I now press the u201CNextu201D button the error message u201CAn RFC destination could not be specified for the logical system XYu201D is shown.
Any help is highly appreciated.
Thanks lot and kind regards,
Franziska

Hi,
The error you get is because the client you have mentioned for logical system mapping and the client in which you created the BOR object are not same.
Remember, for sucessfull transaction Launcher Configurations,
1) The client in which WEB UI Runs
2) The Logical System mapping and client mentioned in ITS url
3) The client is which you created the BOR object.
4) The client on which you are configuring transaction launcher wizard
ALL SHOULD BE THE SAME CLIENT, unless you are using the OWNLOGSYS concept for logical system mapping.
For example,
If my WEB UI is on client 200 of development system,
then i must create TSTC based BOR in client 200 , Map logical system for client 200 and configure trnsaction launcher in client 200.
In this approach, you cant transport the developments to other system and client ( like Quality and production system) , hence its advicible to create a logical system with name OWNLOGSYS. The name of logical system must be kept OWNLOGSYS in all the systems and clients so that then you can transport yout transaction launcher developments and the error you get now will not come. It its not possible to maintain the logical system with this name in all the system , then you will have to do as i mentioned in points 1 to 4.
Hope this helps.
Thanks & Regards,
Suchita

How to debug Transaction Launcher

Hi Experts,
I am new to CRM. I am working on the requiremnet of calling VA01 screen inCRM WEBUI through Transaction Launcher .
As part of it i copied TSTC BOR object to Z and added some extra method to get some default values populated in VA01 screen.
I tested this Z BOR object and it is working fine. Now in CRM configured Transaction Launcher through wizard and given my logical system (connecting to ecc)and Z BOR object and passed parameter value as VA01 to object key in wizard. created my own logical link id with assigned transaction link id and assigned to workcenter->navbarprofile->businessrole.
I followed this blog to configure Transaction Launcher
/people/vikash.krishna/blog/2008/09/23/crm-2007-how-to--2-a-transaction-launcher
After completion of above development i executed webui but i am unable to display VA01..Intially it used to show ECC screen and message as ' you do not have authorization for transaction VA01'.But when i rectified some thing and again execute webui it is now showing blank screen.
I am unable to make it out where i went wrong whether the problem is with logical system or ZBOR object. WhenI tried to debug it by keeping break-point in the class CL_UICMP_LT_ABOXEXECUTION_IMPL and method ip_inbound plug and in the ZBOR object in ECC i am able to see the parameters passed to the traunsaction launcher class but it is not stoping at ZBOR object .
From last 3 days i am trying hard and unsuccessfull.my deadlines are approching.
Please kindly help me out how can i analyze to see where i went exactly wrong.
I really appreciate the persons who helps me in passing the situation.
Regards ,
Pavan T.

Hi Luis Rivera ,
Thanks a Ton. The link id 'Every thing about Transaction Launcher' is really helpfull.Now i am able to display VA01 in Webui .
My Requirement goes like this
User will search for a account say of function 'Sold-to-party' ,after successfull search we will get related partners also.Now user will select one among the related partners(say 'Ship-to-party') and clicks confirm ,Now we will have two confirmed partners sold-to & ship-to.User will now select create order from Navigation bar and VA01 screen should be displayed with sold-to & ship-to fields get filled automatically from conformed partners.
So i created a ZBOR and added a method with those parameters as import parameters . see the below code.
SWC_GET_ELEMENT CONTAINER 'PCODE'      LV_PCODE.
SWC_GET_ELEMENT CONTAINER 'BUYER'      LV_BUYER.
SWC_GET_ELEMENT CONTAINER 'SHIP_TO'    LV_SHIP_TO.
SWC_GET_ELEMENT CONTAINER 'SOLD_TO'    LV_SOLD_TO.
SWC_GET_ELEMENT CONTAINER 'ORDER_TYPE' LV_ORDER_TYPE.
IF LV_PCODE IS NOT INITIAL.
    SET PARAMETER ID: LV_PCODE-pid FIELD LV_PCODE-value.
ENDIF.
IF LV_BUYER IS NOT INITIAL.
    SET PARAMETER ID: LV_BUYER-pid FIELD LV_BUYER-value.
    ENDIF.
IF LV_SHIP_TO IS NOT INITIAL.
    SET PARAMETER ID: LV_SHIP_TO-pid FIELD LV_SHIP_TO-value.
ENDIF.
IF LV_SOLD_TO IS NOT INITIAL.
    SET PARAMETER ID: LV_SOLD_TO-PID FIELD LV_SOLD_TO-VALUE.
ENDIF.
IF LV_ORDER_TYPE IS NOT INITIAL.
    SET PARAMETER ID 'AAT' FIELD LV_ORDER_TYPE-VALUE.
ENDIF.
CALL TRANSACTION OBJECT-KEY-CODE.
I am able to read the values from BOL to my ZBOR parameters
PCODE, SHIP_TO,SOLD_TO,BUYER e.t.c .Now i want set these values to VA01 screen using SET/GET Parameter ID's as shown in above code.but these values are not being set.Could you suggest any way how can i achieve this.
Thanks in Advance.
Regards,
Pavan.
Edited by: Pavan T on Aug 10, 2011 4:26 PM

Transaction Launcher : Calling R/3 Transactions (BOR)

Hi,
Can someone please advise on the following: We need to be able to display R/3 transactions in the SAP WebUI (CRM 6.0). We have done this with CRM (using a copy of TSTC) and this is working fine, but when we want to display R/3 transactions we have certain issues (Error with Action Box Transaction). We also maintained the same obeject (TSTC) in R/3 : synchronous, EXECUTE method, etc.
Basically, we configured the connection to R/3, used the Transaction Launcher Wizard and implemented the link in the navigation bar.
When we launch the transaction, a connection to the R/3 (ECC 6.0) system is made (logon box), but after authentication it comes up with the error : "The current transaction cannot be started via SAPGui for HTML. Only Methods, Workflows and Front Office Processes (only for IS-UI/CCS systems) are allowed." In the bottom of the page it states : "Function Module EWB_PROC_CREATE does not exist."
The connection with ECC 6.0 is working fine as we are able to navigate from the SAP Menu.
We have also checked the transaction we want to launch ("VA03") in SE93 : Gui support is active for SAPGui for HTML, SAPGui for Java, SAPGui for Windows.
Can someone please help. Thank you,
Sebastiaan.

Hi,
we have solved the problem with the missing function module by following the notes 888931 and 1021222.
But I'm now getting the error that I'm not authorized to run the transaction that I'm calling from the IC Web Client (we are calling a transaction in ECC). My user has SAP_ALL, so it sholdn't be a problem. My theory is that it has something to do with the call of IC_LTXE. But I'm not sure.
Does anyone have an idea how to fix this problem?
Kind Regards,
Gitte.

Transaction Launcher problem

All,
I am trying to configure transaction launcher to launch a transaction from R/3 system. (tcode XD01to create customer). I am using CRM 5.0 & R/3 4.6 C
I have already set up the link to ITS in CRMS_IC_CROSS_SYS. Here are the values:
Mapped system: R3SYSTEM
Logical System: <R/3logical system>
Client:<client of r/3 sys>
ITS: http://xxxxxx/scripts/wgate/webgui/!
I have tested the ITS path in the browser. It works perfectly
Now when I use the Transaction launch wizard to create my launch transaction, in step 3 (more Technical details).
I select Transaction Launcher type: BOR
Logical System: <R/3logical system>
Now when I try to select the BOR Type by using F4, I get a message saying that no connection to <R/3logical system>.
I am not able to proceed further due to this. I went to SM59 and tested the R3 connection and it works fine.
Anyone knows what i am missing or doing wrong?
Ani

Ok I think the mistake I was doing was giving the R/3logical system in CRMS_IC_CROSS_SYS. I changed it CRMlogical system. Now I can see the R/3 easy access Menu.
Now for part 2 of my question:
In order to display the customer master in R/3 (Tcode Xd03) what values should I change in the step 3 (more technical details) of the transaction launcher?
I want it to take me directly to the xd03 tcode and open my business partner.

Transaction type called by ITS - Transaction Launcher

Hello guys,
In the ICWC in CRM 5.0 what transaction type could we call with ITS by Transaction Launcher?
For example, I know that we can call transaction like ppoma_crm, bp, is01, but if we defined Z transaction type in the path SPRO » CRM » Transactions » Basic settings » Define Transaction Types, could we call this transactions by ITS in Transaction Launcher?
Could you take off me this doubt?
Best Regards,
Mary

Hi
The transaction launcher allows to connect to any remote CRM ERP or R/3 transaction as well as URLs to a navigation bar. Thus, the remote transactions can be maintained directly in IC WebClient.
Any link entry of the navigation bar that is supposed to call the transaction launcher needs a navigation bar entry that points to a launch transaction ID. Here the details of the transaction to be launched are described: the launch transaction type, the type of object to be called the method (like create, display, change) and possibly parameters to be passed to the transactions. These settings can be configured using the transaction launcher wizard.
Transaction launcher supports two types of transaction
a.     Launching pages of People Centric CRM
b.     Launching BOR transactions of CRM or any remote SAP system
Path is IMGCRMInteraction Center WebClientBasic Functions Transaction Launcher Configure Transaction Launcher (Wizard)
Business Transaction Profile (Name should be in Capital)
Three standard buttons in the navigation profile navigate to the views of the CRM business transactions
a.     Interaction Record: - stores communication related data of communication channels.
b.     Sales Document: - includes quotations and order status and stores all sales items the customer wants to order.
c.     Service Document: - It represents the service aspect of a phone call.
The business transaction profile is controlling which CRM business transaction type is linked to the navigation bar buttons.
You can assign the interaction record and the sales or service transaction types in two different ways:
a.     A sales and/or service document will only be created if the agent presses sales and/or service in the navigation bar and makes entries to these documents.
b.     The sales and/or service documents will be saved as individual documents. Interaction record, sales, and service documents are stored by separate document IDs and are connected by the data flow.
Path is IMGCRMInteraction Center WebClientBusiness Transactions Define Business Transaction Profiles
Hope this helps
Regards
Rekha Dadwal

A popup message comes when using transaction launcher

Hello experts.
I have configured transaction launcher to show a report program output in the UI (stateful not checked).
Everything is working fine, but when I click on any other navigation bar links after seeing the report in UI, a pop-up message comes as 'Possible Data Loss. Do you want to continue'. Although when I click 'yes', it works normally thenafter and no data is lost.
But what can be the reason for this message to com and how can I remove it.
Thanks
Abhi

Hi Robert,
I'm facing the same problem. But as I've created my transaction launcher by IMG link 'Configure Transaction Launcher' I can't see any entry under 'Define URLs and parameter.
Also while creating the transaction launcher both Stateful and Raise Veto were not checked.
What do I do in this scenario?
Regards,
Shaili

No Connection to Target Component while configuring Transaction Launcher

Similar Messages

Maybe you are looking for