No connection with computer.

My son purchased the newest Ipod and gave me his 3g one.  He rebooted the old one so that I would not have anything of his.  It stay in the apple screen and does not do anything.  I let the battery go low as instructions in help then connected it to my computer.  My computer does not read it at all.  I had already downloaded the itunes.  I plugged it in electrical plug now and once in a while the battery screen comes up then it goes back to the apple screen.  When touching the screen it does not let me see the battery again.  I do not know if it is charging.   I have a 3g touch screen.

To get iTunes to see the iPod:
- Have you tried resetting the iPod:
Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- Have you tried placing it in recovery mode.  For recovery mode see:
iPhone and iPod touch: Unable to update or restore
- Next try placing it DFU mode:
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings

Similar Messages

  • How to restore my ipad?My ipad say on screen CONNECT TO ITUNE.How can i do when i connect with computer.It is need itune new version.Can you sent me.I will be waiting your answer.Please help me sir.

    How to restore my ipad?My ipad say on screen CONNECT TO ITUNE.How can i do when i connect with computer.It is need itune new version.Can you sent me.I will be waiting your answer.Please help me sir.

    Check for Updates.
    http://i1224.photobucket.com/albums/ee374/Diavonex/Album%208/78d42b19fa42e8d83b5 5a65e1333373f_zpsf58bbe10.jpg

  • My apple tv3  is not powering on.  Connected with Computer, with micro USB cable with power on, it is not shown in Devices.  How to rectify

    My apple tv3, serial no. C07JWBZ9DRHN is not powering on.  Connected with Computer, with micro USB cable with power on, it is not shown in Devices.  How to rectify

    You have to remove all cables before connecting to your computer with micro usb. Power is only connected when using a 3rd gen device and done after the initial connection.
    http://support.apple.com/kb/HT4367?viewlocale=en_US&locale=en_US

  • I used Iphone sofeware edit one photo by cuting its size, however, when I connect with computer. The photo edited still was old photo, no any changed. I want to edit the photo, and cut the size of photo. What should I do now??

    I used Iphone sofeware edit one photo by cuting its size, however, when I connect with computer. The photo edited still was old photo, no any changed. I want to edit the photo, and cut the size of photo. What should I do now??

    I used Iphone sofeware edit one photo by cuting its size, however, when I connect with computer. The photo edited still was old photo, no any changed. I want to edit the photo, and cut the size of photo. What should I do now??

  • My airport extreme only will connect with computer or ipad not both

    my airport extreme only will connect with computer or ipad not both

    We need just a bit more information, please before we can begin to accurately troubleshoot this issue.
    1) What is the make and model number of your modem?
    2) What operating system are you using on the MacBook Pro at this time. Your tagline indicates that you are using OS X (10.4.8), but this is about 6-7 years out of date.
    If you are no sure which operating system your Mac is using......click the Apple icon in the upper left corner of the screen, then click About This Mac. Post back with the OS X Version number that you see there.

  • Ipad not connect with computer. error number (0xE8000084), ipad not connect with computer error number (0xE8000084)

    ipad not connected to computer. erreo number (0xE8000084)

    Hello Mohamed Abdo,
    It sounds like you are unable to connect your iPad to the computer because you get this error code when you try. I would use the troubleshooting for these types of errors from the following article:
    iOS: Unknown error containing '0xE' when connecting to a Windows PC
    http://support.apple.com/kb/TS3221
    Start with these steps, and there are additional steps in the article if you need them:
    1. Restart your computer.
    2. Install the latest version of iTunes.
    3. Verify that your computer meets the minimum system requirements. iOS devices require the following minimum version of Windows:
    Windows XP Service Pack 3
    Windows Vista
    Windows 7
    Windows 8
    4. Download and install any available software updates from Microsoft.
    5. Connect the device directly to your computer; not to an external USB hub. Find out if your computer has USB 2.0 ports.
    6. Check that the Dock Connector or Lightning Connector on both the device and cable are clean of any lint or other debris. If possible, connect your device using a different Apple 30-pin to USB cable or Apple Lightning Connector to USB cable.
    7. Disconnect other USB peripherals from your computer, with the exception of your keyboard and mouse. After disconnecting these peripherals, restart your computer, connect your device, and open iTunes.
    8. Connect your device to a different USB port on your computer.
    Thank you for using Apple Support Communities.
    Take care,
    Sterling

  • HT1414 iphone unable to activate, no response with charging or reset, does not connect with computer

    Need help!!! I got my Iphone a week ago and I can't turn it on or charge it, it doesn't connect to the computer and it doesn't turn on with the reset ( top button and home button together). I would appriciate your help.

    Not sure if it has ever been modified before, i'll have to ask my daughter in law.
    i'm not familiar with iphone(i have htc, for shame:-))  Cydia?   i can get no further than entering language, country and WiFi connection before it trys then fails to activate.
    Thanks  for the reply

  • Connection with computer.

    hi,
    i have a problem.when i connect computer by conection the folder has been broke...
    and then,i can't get any software from online...pls
    Moderator's notes: The title has been edited to match the topic of the post. 

    @remember
    It would help if you posted what device you are using as we don't see this information upon forum, and whether you are trying to use Nokia Suite upon your PC.
    Happy to have helped forum with a Support Ratio = 42.5

  • LaserJet P2015d seems to lose connection with computer; I have to power cycle the printer

    I purchased the LaserJet P2015D in March 2008 and have been pleased with it.  However in the last several weeks it seems that my computer "loses" it, like it is not connected.  I issue the print commance from my computer, I see the document in the printer cache, but it never goes to the printer.  I can fix this by power cycling the printer, i.e., unplugging it and plugging it back in.  After this, the cached document gets released and printed.  This works most of the time.  Sometimes I have to delete the cached document and re-issue the print  command.  My computer will see the printer for an hour or two and then I have to apply the  fix again.  And then in the last couple of days the toner warning light has come on constantly, and I'm pretty sure the toner cartridge is not empty.  The print quality remains good.
    I suspect a hardware problem, like a component (capacitor?) has failed.  Are spare parts available and how can I buy them?  Can anyone recommend specifically what parts might be needed?

    question answered on a different part of the boards

  • Curve 8330 won't connect with computer

    HELP! I am going crazy trying to figure out this problem. When I plug my Blackberry Curve 8330 into my USB, it is no longer recognized. The home screen shows that it is charging, but when I open My Computer, the Blackberry does not show up as a mounted drive. When I launch Desktop Manager, it says that my phone is disconnected. I need help reconnecting my phone and my computer.
    I know the problem is not the cord, because I tested it with a portable external hard drive. That also showed me that it is not a problem with the USB port.
    First, I attempted the following minor solutions:
    Battery pull and restart computer (duh! of course that was the first thing I tried)
    Tried to reconnect via the Connection settings in DM (acts like I haven't plugged in the Blackberry)
    Checked to make sure that Mass Storage mode was on in Options -> Media Card 
    Turned off Mass Storage, restarted both computer and BB, then turned on Mass Storage
    Then, I moved on to more substantial attempted solutions:
    Reformatted the mini-SD
    Completely uninstalled Desktop Manager and all BB software (followed instructions at http://www.blackberry.com/btsc/search.do?cmd=displayKC&docType=kc&externalId=KB02206&sliceId=SAL_Pub... for a clean uninstall).
    Reinstalled new drivers and DM software
    Did a FULL wipe of my BB handheld (losing all my information)
    Finally, I tried the following over the top solutions:
    Full wipe of my BB handheld and went back to factory settings
    Used System Restore to go back two weeks on my computer.
    And I still cannot get my BB to connect to my computer.
    I have tried everything through page 6 at "HOWTO : use your blackberry as a USB device" (http://supportforums.blackberry.com/t5/BlackBerry-Desktop-Software/HOWTO-use-your-blackberry-as-a-US...), so please don't just direct me there unless you have some real insight to something I missed on those pages.
    Any help would be greatly appreciated.

    Hi there!
    Wow -- you have tried several things...so the only things left that I can steer you to is this list of troubleshooting atricles...hopefully something will be useful:
    http://supportforums.blackberry.com/t5/BlackBerry-Desktop-Software/Tips-for-getting-BlackBerry-Deskt...
    KB02640 Troubleshooting USB connections
    KB15486 Top 10 BlackBerry smartphone and BlackBerry Desktop Manager troubleshooting tips
    KB11439 BlackBerry Desktop Software does not detect the BlackBerry smartphone when it is connected
    KB00019 No PIN displayed in BlackBerry Desktop Redirector
    KB10938 "USB charging current is insufficient" appears on the BlackBerry smartphone
    KB01451 How to turn on advanced synchronization logging if a wired synchronization fails
    Also, check that you are using only root USB ports...no hubs (sometimes the front-side ports are hubs...use a rear USB port). And make sure to try disabling USB power management in your system configuration (Device Manager).
    Apologies in advance if this is redundant -- there's no way to be sure if you've already seen and tried these.
    Hopefully something there is helpful!
    Cheers!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • N97: problems to connect with computer by usb cabl...

    Need help!
    I can't connect anymore my phone to the computer since I actualise all software (ovi and pc suite). It says that the phone are connected in a not compatible way. I only made the same. Connect the phone and select pc suite.
    Nothing changes. Only the nokia software. How can I solved this? It's urgent. My N97 is my poket pc.
    Thanks

    /t5/Nseries-and-S60-Smartphones/N97-Not-In-PC-Suite-USB-Mode/m-p/701944#M212511
    as per this you may try a Factory reset..
    All the Best...
    --------------------------------------------------​--------------------------------------------------​--------------------------------------------------​--If you find this helpful, pl. hit the White Star in Green Box...

  • AEBS connection with computer with LAN

    If I simply connect an ethernet patch cable between my airport extreme base station and desktop computer, will it transfer data to and from my desktop via the ethernet cable, or will it continue to do so wirelessly?
    Just curious.
    Al

    Your Mac will then be able to transfer data either by Ethernet or wireless. The order of network connections in the Network preference pane will determine which network the Mac will use. You can drag the connection you want preferred to the top of the list.

  • IPod stopped connecting with computer

    I recently recieved an iPod and it was working quit fine until one day it just stopped. It won't connect to my computer (Windows XP) and it won't charge. I tried the R's and it didn't work.
    What can I do to connect it back up?
    The 'do not disconnect' sign won't even appear anymore.
      Windows XP  

    I've got the exact same issue.
    Won't charge, but it did yesterday while at the apple store. It was in a sleep mode and wouldn't turn on until it was plugged into a wall charger..and a wall charger only.
    The computer usb isn't enough the tech said. So, that worked for all but an hour. I get home and yes my iPod will turn on and play music now, but I can't connect it to ANY computer. I've tried my Windows XP 64bit Dell Precision 380, Windows XP Pro 32 bit on a Latitude D620, OSX 10.4.8 on my Mac Mini, and OSX 10.4.8 on my girlfriend's MacBook.
    Nothing will work. Not even the wall charger will get it to charge now.
    My theory: the connector part of the iPod has a problem. Why else would the whole iPod work but for charging and connecting to a computer. That are some type of software on the iPod mainboard has gone crazy.
    iPod Video 80GB - 4 Months Old   Mac OS X (10.4.8)   Dell Latitude D620 - Dell Precision 380 - Mac Mini - MacBook

  • Iphone 3G cant connect with Computer.

    Heey Everyone.
    When i Put My Iphone with cabel on my computer then he cant find the driver like MT6229. i hope one of you cn help me because i need to work with it
    Greetings Dimitri.

    See: http://support.apple.com/kb/HT1808 to restore the phone using Recovery Mode. You will lose all content on the phone. This is the only way to bypass the lock screen if you don't have the last computer the phone was synced to.

  • Can I sinc 4s over bluetooth connection with computer

    want to know if I can sync with iTunes over a bluetooth connection

    No, but you can via wi-fi with iOS 5.

Maybe you are looking for

  • How to get all the index of "selected rows" in table control?

    Hi Gurus, I have a table control, wherein I need to get selected row so that I can get its respective TABIX. I know that the event for capturing selected row is in PAI. I also ensure that the w/ selColumn name in my screenpainter is exactly the same

  • Family Sharing apps not possible to share

    Have Family Sharing but the apps does not appear on members list as "purchased". They have to be paid for. Why? If I log on as me, dad, organizer, then the apps are downloadable and does not have to purchase them again. Setup: 2 IOS8 (iPhone5) + 1 IO

  • Can no longer listen to low-quality WAV files

    I have used iTunes to organize and listen to voice files recorded on portable digital recorders and cameras, but today discovered that they no longer work. Furthermore I can no longer import these files, with no error message. Should I look to replac

  • How to read the long text in Transaction Code : VA02 at runtime??????

    Hi, I am undable to find the long text in TC: VA02 at runtime. Actulally my requirement is like how to compare between the item level long text at runtime and existing long text for that item. If any body has soluntion, please provide me. I would rea

  • "Merge files into a single PDF" does not support Word Docs

    I am using Acrobat 9 and Office 2007.  I am trying to convert 100 Word docs into a single PDF.  However, Word is not supported.  In acrobat, I go to preferences and then Convert to PDF, Word is not listed.  I have excel and powerpoint but not Word.