No connectivity or very slow connectiviy with iPad2
Just downloaded F-Secure Freedome onto a PC and an iPad2, (iOS 8.4). PC works fine (Windows7). Freedome version 2.3.1.2529 in the iPad app. When Freedome is on Safari will not connect. When I turn off Freedome on app nothing improves. When I turn off VPN in Settings Safari connects again. No change if I go Airplane mode on or off, the only thing that fix the issue for me is to turn off the VPN in settings, which makes the app kind of..... obsolete... on the iPad. Anyone who knows how to fix this issue?
I came up on your post, I too am experiencing the same thing. I got the new iPhone 5s on SAT and today I started having no connection issues but the phone would say I have 3 to 4 bars of signal. I ran speed test one minute I would have 67 ping and 12MB download then it would drop to .02MB and 100 ping in the same spot in the room. I can restart the device and it will run well for about 2 min then it craps out. I have the unlimited data package and my droid phone never had this problem Im thinking of taking this thing back.
Similar Messages
-
Time Capsule connection is very slow on windows 8
Time Capsule wireless connection is very slow on a Samsung windows 8 computer.
Any advice? It is placed next to my mac and the speed is 20% less (often more)
If I move the computer into the livingroom (about 10 meter) the speed is reduced with 95%.Windows 8 drivers are still developing.. download the drivers from the wireless manufacturer not Samsung and try it.
I am not surprised though at differences between wireless.. card using different chipsets and different antennas will give totally different results.
But you can help a bit.. setup the TC with SMB names.. short, no spaces, pure alphanumeric.
Set the name for 5ghz different to 2.4ghz so you can change over.
Set the security to WPA2 Personal which is the only one suitable for N wireless at home without a server.
Set 2.4ghz to manual radio channels and test, channel 1, 6, 11 in turn.
Try up close using 5ghz as it is faster.. but to get full speed you need a broadcom 450mbps card..
Remember wireless chipset like atheros and broadcom never quite see eye to eye.. it is one reason you buy the same brand.
Solution.. buy a cheap edimax wireless router.. plug it into the TC and use it for wap only.. I just did this for a friend.. works much better than TC or airport extreme on a PC. But I have not used win8 yet.. no idea if that is going to be problematic. -
I have just returned from a business trip to China and my Macbook is not well. My internet connection is very slow and drops out intermittently. Is there a utility I can run which might clean it up.
Hello,
I have very similar problem. Suddenly Firefox stopped work - It was working few days after ver. 4 update. I was looking everywhere for some solution but nothing worked.
- uninstalled firewall - did not worked
- added full exception for Firefox into the firewall - did not worked
- Firefox reinstall - did not worked
- Firefox complete reinstall (registry included) - did not worked
- IPv6 diseabling - did not worked
- diferent proxy options (no proxy, system proxy, autodetect proxy) - did not worked
- new firefox profile - did not worked
- complete coockies, history... deleted - did not worked
- there is only one solution which partly works - I have used public proxy addresses for Firefox but the ping is (750ms), down/up (0.8MB/0.2MB originaly (10MB/2MB) and yes I have tried different proxy server from different countries from my included.
- IE is working perfectly and without proxy
- other companies browser - did not worked too
- only IE is working
- I have used three different malware, trojans, spyware, anti-virus programs and nothing
It seems to me as hopeless situation or very clever move from Microsoft, I am forced to use IE - at least this works
Any ideas, solutions?
System Windows 7, firewall Comodo Internet security
Thanks everyone for the help -
Dear all
I bought two days ago HP Deskjet 3520 e-All-in one printer serie, but i have some really bad issues with the scanner! I have searched on the internet and i couldn’t find anything to solve the problem.
I have installed the printer according to the book of the printer, so everything did go well(i think), except that i can’t connect the scan to my computer, a Mac OS X (i am connected with the printer). I get directed to the website where i can connect the scanner, but every time i try to connect it with wi-fi, i get two notification, one from my computer (from HP Itility (Dutch) program) that the connection is off and second from the website that i have to make sure that i’m connected with internet (which i am) and to check the IP address if it is the same with my computer (which is the same).
Obesely something did go wrong, but i can’t find the problem.
Beside when its copy or prints a document (no matter how many pages) it’s very slow. It takes 10 -15 minutes till the printer starts. Has it something to do with the problem i’ve got with the scanner or is the printer always so slow? Because the very first time, when i installed the printer, it printed very fast.
By the way i also print the test-results to check if there is a problem, but according to test-results there are no problems at all.
I hope that someone recognize this problem and can help me to solve it.
Regards,
EsraHello chesterpascual,
Welcome to the HP Support Forums!
Regarding the Deskjet 3520 and the error to use setup cartridges, you will need to call HP's Technical Support to see about sending some to you.
Click here to locate the contact information.
Regards,
JERENDS
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping! -
Very slow working with eps files over new network
Please help!!!
Our IT has recently upgraded us from a OSX server to a 2 Terabyte SNAP SERVER 520.
I am using the only INTEL Mac in the department (we have another 10+ G5 PPCs running 10.4), and the only one using OSX 10.5. Since changing to the new server, I am also the only one with several file saving/opening issues.
I believe this is a network issue.
It is with mostly ADOBE products and we all know they will not support, working over the network. Due to the volume of files, I simply cannot drag files to my HD, and work locally. It is not practical. I also know that we have not had any issues in the past, and don't see why I can't get to the root of the problem.
**The most obvious issue is Illustrator .eps files.**
I can open and save .ai files in good time both locally, and over the network. There is no difference either way. HOWEVER, if it is an .eps file working over the network is not practical. I get the spinning wheel for about 2 minutes each time I open, save, or make a change. It is VERY slow. Working on eps files locally is fine (about the same speed as .ai files), but as soon as it hits the server, it is painfully slow to do anything.
Additionally, when saving Photoshop, Illustrator, InDesign AND Quark 7 files (direct to the network), I am regularly getting "Could not save because write access was not granted", or "Could not save becasue unexpected end-of-file was encountered", or "Could not save because the file is already in use or as left open" type errors.
I simply then click 'OK', and then hit save again, and it either gives me the same message, or it goes into 'save as' mode which lets me save the file (same name, and same location, but the original file has disappeared).
I am connected to the server IP address through afp:// but have also tried cifs://. IT have removed all access to the server through smb://, so I cannot try this.
ANY help is appreciated.With regard to the EPS issue, I think I may have found the source of the problem for SMB users: the Suitcase Fusion plug-in.
Did you make any progress on these issues? -
Oracle-11g connection is very slow
Hi Team,
Installed oracle11g with database yesterday. but the connection to database using tnsnames is very slow even from host server, where as sys / as sysdba is normal in hostserver.
And checked other databases(10g) connections in the same host server, normal. Here with I spooled alert log file and parameter list. pls do the needful help.
Aler log file from shut down to startup.
Sat Aug 06 11:28:54 2011
Shutting down instance (immediate)
Stopping background process SMCO
Shutting down instance: further logons disabled
Sat Aug 06 11:28:55 2011
Stopping background process CJQ0
Stopping background process QMNC
Stopping background process MMNL
Stopping background process MMON
License high water mark = 10
ALTER DATABASE CLOSE NORMAL
Sat Aug 06 11:28:58 2011
SMON: disabling tx recovery
SMON: disabling cache recovery
Sat Aug 06 11:28:58 2011
Shutting down archive processes
Archiving is disabled
Sat Aug 06 11:28:58 2011
ARCH shutting down
Sat Aug 06 11:28:58 2011
ARCH shutting down
Sat Aug 06 11:28:58 2011
ARCH shutting down
ARC1: Archival stopped
ARC0: Archival stopped
ARC3: Archival stopped
Sat Aug 06 11:28:58 2011
ARCH shutting down
ARC2: Archival stopped
Thread 1 closed at log sequence 9
Successful close of redo thread 1
Completed: ALTER DATABASE CLOSE NORMAL
ALTER DATABASE DISMOUNT
Completed: ALTER DATABASE DISMOUNT
ARCH: Archival disabled due to shutdown: 1089
Shutting down archive processes
Archiving is disabled
Archive process shutdown avoided: 0 active
ARCH: Archival disabled due to shutdown: 1089
Shutting down archive processes
Archiving is disabled
Archive process shutdown avoided: 0 active
Sat Aug 06 11:29:01 2011
Stopping background process VKTM:
Sat Aug 06 11:29:05 2011
Instance shutdown complete
Sat Aug 06 11:32:12 2011
Starting ORACLE instance (normal)
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Picked latch-free SCN scheme 3
Using LOG_ARCHIVE_DEST_1 parameter default value as USE_DB_RECOVERY_FILE_DEST
Autotune of undo retention is turned on.
IMODE=BR
ILAT =118
LICENSE_MAX_USERS = 0
SYS auditing is disabled
Starting up:
Oracle Database 11g Release 11.2.0.1.0 - 64bit Production.
Using parameter settings in client-side pfile /oracle/ora11g/apps/dbs/initrakshak.ora on machine abml01
System parameters with non-default values:
processes = 700
sga_max_size = 30G
sga_target = 30G
control_files = "/barch10g_db/ora11g/rakshak_control/rkdatabase/control1/rakshak_control01.ctl"
control_files = "/barch10g_db/ora11g/rakshak_redo/rkdatabase/control2/rakshak_control02.ctl"
control_files = "/barch10g_db/ora11g/rakshak_idx1/rkdatabase/control3/rakshak_control03.ctl"
db_block_size = 16384
compatible = "11.2.0"
log_archive_dest = "/barch10g_db/ora11g/rakshak_archive/rkdatabase/rakshak"
db_recovery_file_dest = "/barch10g_db/ora11g/rakshak_idx1/rkdatabase/flash_recovery_area"
db_recovery_file_dest_size= 2G
undo_management = "AUTO"
undo_tablespace = "UNDOTBS1"
sec_case_sensitive_logon = FALSE
remote_login_passwordfile= "EXCLUSIVE"
utl_file_dir = "/barch10g_db/ora11g/ldoutput/"
plsql_code_type = "native"
job_queue_processes = 100
cursor_sharing = "FORCE"
audit_file_dest = "/barch10g_db/ora11g/rakshak_idx1/rkdatabase/adump"
audit_trail = "DB"
db_name = "rakshak"
open_cursors = 700
diagnostic_dest = "/barch10g_db/ora11g/rakshak_idx1/rkdatabase/"
Sat Aug 06 11:32:33 2011
PMON started with pid=2, OS id=9463
Sat Aug 06 11:32:34 2011
VKTM started with pid=3, OS id=9465 at elevated priority
VKTM running at (10)millisec precision with DBRM quantum (100)ms
Sat Aug 06 11:32:34 2011
GEN0 started with pid=4, OS id=9469
Sat Aug 06 11:32:34 2011
DIAG started with pid=5, OS id=9471
Sat Aug 06 11:32:34 2011
DBRM started with pid=6, OS id=9473
Sat Aug 06 11:32:34 2011
PSP0 started with pid=7, OS id=9475
Sat Aug 06 11:32:34 2011
DIA0 started with pid=8, OS id=9477
Sat Aug 06 11:32:34 2011
MMAN started with pid=9, OS id=9479
Sat Aug 06 11:32:34 2011
DBW0 started with pid=10, OS id=9481
Sat Aug 06 11:32:34 2011
DBW1 started with pid=11, OS id=9483
Sat Aug 06 11:32:34 2011
DBW2 started with pid=12, OS id=9485
Sat Aug 06 11:32:34 2011
LGWR started with pid=13, OS id=9487
Sat Aug 06 11:32:34 2011
CKPT started with pid=14, OS id=9489
Sat Aug 06 11:32:34 2011
SMON started with pid=15, OS id=9491
Sat Aug 06 11:32:34 2011
RECO started with pid=16, OS id=9493
Sat Aug 06 11:32:34 2011
MMON started with pid=17, OS id=9495
Sat Aug 06 11:32:34 2011
MMNL started with pid=18, OS id=9497
Sat Aug 06 11:32:34 2011
ORACLE_BASE not set in environment. It is recommended
that ORACLE_BASE be set in the environment
Sat Aug 06 11:34:34 2011
Shutting down instance (immediate)
Shutting down instance: further logons disabled
Stopping background process MMNL
Stopping background process MMON
License high water mark = 1
ALTER DATABASE CLOSE NORMAL
ORA-1507 signalled during: ALTER DATABASE CLOSE NORMAL...
ARCH: Archival disabled due to shutdown: 1089
Shutting down archive processes
Archiving is disabled
Archive process shutdown avoided: 0 active
ARCH: Archival disabled due to shutdown: 1089
Shutting down archive processes
Archiving is disabled
Archive process shutdown avoided: 0 active
Sat Aug 06 11:34:37 2011
Stopping background process VKTM:
Sat Aug 06 11:34:40 2011
Instance shutdown complete
Sat Aug 06 11:35:55 2011
Starting ORACLE instance (normal)
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Picked latch-free SCN scheme 3
Using LOG_ARCHIVE_DEST_1 parameter default value as USE_DB_RECOVERY_FILE_DEST
Autotune of undo retention is turned on.
IMODE=BR
ILAT =118
LICENSE_MAX_USERS = 0
SYS auditing is disabled
Starting up:
Oracle Database 11g Release 11.2.0.1.0 - 64bit Production.
Using parameter settings in client-side pfile /oracle/ora11g/apps/dbs/initrakshak.ora on machine abml01
System parameters with non-default values:
processes = 700
sga_max_size = 30G
sga_target = 30G
control_files = "/barch10g_db/ora11g/rakshak_control/rkdatabase/control1/rakshak_control01.ctl"
control_files = "/barch10g_db/ora11g/rakshak_redo/rkdatabase/control2/rakshak_control02.ctl"
control_files = "/barch10g_db/ora11g/rakshak_idx1/rkdatabase/control3/rakshak_control03.ctl"
db_block_size = 16384
compatible = "11.2.0"
log_archive_dest = "/barch10g_db/ora11g/rakshak_archive/rkdatabase/rakshak"
db_recovery_file_dest = "/barch10g_db/ora11g/rakshak_idx1/rkdatabase/flash_recovery_area"
db_recovery_file_dest_size= 2G
undo_management = "AUTO"
undo_tablespace = "UNDOTBS1"
sec_case_sensitive_logon = FALSE
remote_login_passwordfile= "EXCLUSIVE"
utl_file_dir = "/barch10g_db/ora11g/ldoutput/"
plsql_code_type = "native"
job_queue_processes = 100
cursor_sharing = "FORCE"
audit_file_dest = "/barch10g_db/ora11g/rakshak_idx1/rkdatabase/adump"
audit_trail = "DB"
db_name = "rakshak"
open_cursors = 700
diagnostic_dest = "/barch10g_db/ora11g/rakshak_idx1/rkdatabase/"
Sat Aug 06 11:36:16 2011
PMON started with pid=2, OS id=9648
Sat Aug 06 11:36:16 2011
VKTM started with pid=3, OS id=9657 at elevated priority
VKTM running at (10)millisec precision with DBRM quantum (100)ms
Sat Aug 06 11:36:16 2011
GEN0 started with pid=4, OS id=9669
Sat Aug 06 11:36:16 2011
DIAG started with pid=5, OS id=9678
Sat Aug 06 11:36:16 2011
DBRM started with pid=6, OS id=9686
Sat Aug 06 11:36:16 2011
PSP0 started with pid=7, OS id=9697
Sat Aug 06 11:36:16 2011
DIA0 started with pid=8, OS id=9704
Sat Aug 06 11:36:16 2011
MMAN started with pid=9, OS id=9711
Sat Aug 06 11:36:16 2011
DBW0 started with pid=10, OS id=9713
Sat Aug 06 11:36:16 2011
DBW1 started with pid=11, OS id=9715
Sat Aug 06 11:36:16 2011
DBW2 started with pid=12, OS id=9717
Sat Aug 06 11:36:16 2011
LGWR started with pid=13, OS id=9719
Sat Aug 06 11:36:16 2011
CKPT started with pid=14, OS id=9721
Sat Aug 06 11:36:16 2011
SMON started with pid=15, OS id=9723
Sat Aug 06 11:36:16 2011
RECO started with pid=16, OS id=9725
Sat Aug 06 11:36:16 2011
MMON started with pid=17, OS id=9727
Sat Aug 06 11:36:16 2011
MMNL started with pid=18, OS id=9729
Sat Aug 06 11:36:16 2011
ORACLE_BASE from environment = /oracle/ora11g/home
Sat Aug 06 11:36:40 2011
alter database mount
Sat Aug 06 11:36:44 2011
Successful mount of redo thread 1, with mount id 3292194824
Database mounted in Exclusive Mode
Lost write protection disabled
Completed: alter database mount
Sat Aug 06 11:36:54 2011
alter database open
LGWR: STARTING ARCH PROCESSES
Sat Aug 06 11:36:54 2011
ARC0 started with pid=20, OS id=9743
Sat Aug 06 11:36:55 2011
ARC0: Archival started
LGWR: STARTING ARCH PROCESSES COMPLETE
ARC0: STARTING ARCH PROCESSES
Sat Aug 06 11:36:55 2011
ARC1 started with pid=21, OS id=9745
Sat Aug 06 11:36:55 2011
ARC2 started with pid=22, OS id=9747
Sat Aug 06 11:36:55 2011
ARC3 started with pid=23, OS id=9749
ARC1: Archival started
ARC2: Archival started
ARC2: Becoming the 'no FAL' ARCH
ARC2: Becoming the 'no SRL' ARCH
ARC1: Becoming the heartbeat ARCH
Thread 1 opened at log sequence 9
Current log# 3 seq# 9 mem# 0: /barch10g_db/ora11g/rakshak_idx1/rkdatabase/redo3/rakshak_redolog3a.log
Current log# 3 seq# 9 mem# 1: /barch10g_db/ora11g/rakshak_idx1/rkdatabase/redo3/rakshak_redolog3b.log
Successful open of redo thread 1
Sat Aug 06 11:36:55 2011
SMON: enabling cache recovery
Successfully onlined Undo Tablespace 2.
Verifying file header compatibility for 11g tablespace encryption..
Verifying 11g file header compatibility for tablespace encryption completed
SMON: enabling tx recovery
Database Characterset is WE8ISO8859P1
No Resource Manager plan active
replication_dependency_tracking turned off (no async multimaster replication found)
Starting background process QMNC
Sat Aug 06 11:36:55 2011
QMNC started with pid=25, OS id=9753
Completed: alter database open
Sat Aug 06 11:36:56 2011
db_recovery_file_dest_size of 2048 MB is 0.99% used. This is a
user-specified limit on the amount of space that will be used by this
database for recovery-related files, and does not reflect the amount of
space available in the underlying filesystem or ASM diskgroup.
ARC3: Archival started
ARC0: STARTING ARCH PROCESSES COMPLETE
Sat Aug 06 11:36:58 2011
Starting background process CJQ0
Sat Aug 06 11:36:58 2011
CJQ0 started with pid=24, OS id=9768
Setting Resource Manager plan SCHEDULER[0x2FF9]:DEFAULT_MAINTENANCE_PLAN via scheduler window
Setting Resource Manager plan DEFAULT_MAINTENANCE_PLAN via parameter
Sat Aug 06 11:37:01 2011
Starting background process VKRM
Sat Aug 06 11:37:01 2011
VKRM started with pid=26, OS id=9770
Sat Aug 06 11:41:55 2011
Starting background process SMCO
Sat Aug 06 11:41:55 2011
SMCO started with pid=29, OS id=9920
parameter list
db_name='rakshak'
+#memory_target=30G+
processes = 700
audit_file_dest='/barch10g_db/ora11g/rakshak_idx1/rkdatabase/adump'
audit_trail ='db'
db_block_size=16384
db_recovery_file_dest='/barch10g_db/ora11g/rakshak_idx1/rkdatabase/flash_recovery_area'
db_recovery_file_dest_size=2G
diagnostic_dest='/barch10g_db/ora11g/rakshak_idx1/rkdatabase/'
+#dispatchers='(PROTOCOL=TCP) (SERVICE=ORCLXDB)'+
open_cursors=700
job_queue_processes=100
remote_login_passwordfile='EXCLUSIVE'
undo_management='AUTO'
undo_tablespace='UNDOTBS1'
+# You may want to ensure that control files are created on separate physical+
+# devices+
control_files = '/barch10g_db/ora11g/rakshak_control/rkdatabase/control1/rakshak_control01.ctl','/barch10g_db/ora11g/rakshak_redo/rkdatabase/control2/rakshak_control02.ctl','/barch10g_db/ora11g/rakshak_idx1/rkdatabase/control3/rakshak_control03.ctl'
compatible ='11.2.0'
SGA_MAX_SIZE=30G
SGA_TARGET=30G
Utl_file_dir='/barch10g_db/ora11g/ldoutput/'
sec_case_sensitive_logon=FALSE
plsql_code_type=native
cursor_sharing='FORCE'
log_archive_dest='/barch10g_db/ora11g/rakshak_archive/rkdatabase/rakshak'
If any information is needed, pls let me know.
thanks in advance
Regards
Phani KumarPhani wrote:
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=192.168.247.27)(PORT=1522)))Why use port 1522?
It is always a good idea to use the standard ports for a network application. There is no logic in obfuscating ports for security purposes. It also makes network management and dealing with quality of service issues for example, much more complex if you do not stick to the registered application ports.
Also note that if you provide a dotted IP address, only that address will be used for binding the tcp port as a listening end point. This means no connections will be accepted on localhost and other IP addresses of that server. Make sure that this is what is technically required.
ifconfig
bond6 Link encap:Ethernet HWaddr 00:26:55:D3:02:B6
Why are you using bonding? How many bonded interfaces are there and now many physical NICs? Bond6 alludes that it is the 7th bonded interface - and at 2 NICs per bonded interface it implies that your server has 14 physical Ethernet interfaces. Which I doubt is true.
RX packets:1309675596 errors:5 dropped:0 overruns:0 frame:3Not good to see any errors. What does ethtool stats show? Also check that the physical interfaces are enabled for full duplex. Some Cisco switches do not negotiate it properly and the NIC could be running half duplex.
Also - using bonding... does not seem right. The 1st and default bonded interface should be +/dev/bond0+ - and not bond6.
Check the server's network configuration (the +ifcfg-*+ files in +/etc/sysconfig/networking-scripts+ directory). Suggest that you get a network engineer (or the like) to assist with reviewing the network setup of that server. -
Very slow computer with all apps after Yosemite install
I'm attaching the EtreCheck in order to get some help. Thanks.
Problem description:
Very slow launch of applications with Yosemite
EtreCheck version: 2.1.2 (105)
Report generated 15 de diciembre de 2014, 19:28:26 GMT+1
Hardware Information: ℹ️
MacBook Pro (15-inch, Late 2011) (Verified)
MacBook Pro - model: MacBookPro8,2
1 2.2 GHz Intel Core i7 CPU: 4-core
8 GB RAM Upgradeable
BANK 0/DIMM0
4 GB DDR3 1333 MHz ok
BANK 1/DIMM0
4 GB DDR3 1333 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
Intel HD Graphics 3000 - VRAM: 512 MB
AMD Radeon HD 6750M - VRAM: 512 MB
Color LCD 1920 x 1080
HP 2311x 1920 x 1080 @ 60 Hz
System Software: ℹ️
OS X 10.10.1 (14B25) - Uptime: 0:22:35
Disk Information: ℹ️
APPLE HDD HTS727575A9E362 disk0 : (750,16 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted> : 210 MB
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
Macintosh HD (disk1) / : 748.93 GB (83.02 GB free)
Core Storage: disk0s2 749.30 GB Online
MATSHITADVD-R UJ-8A8
USB Information: ℹ️
Apple Inc. FaceTime HD Camera (Built-in)
Western Digital My Passport 0748 2 TB
S.M.A.R.T. Status: Verified
disk2s1 (disk2s1) <not mounted> : 210 MB
Mi Passport (disk2s2) /Volumes/Mi Passport : 2.00 TB (121.89 GB free)
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Computer, Inc. IR Receiver
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Anywhere
Adware: ℹ️
Geneio [Remove]
Kernel Extensions: ℹ️
/Library/Application Support/Roxio
[not loaded] com.roxio.TDIXController (2.0) [Support]
/Library/Extensions
[loaded] at.obdev.nke.LittleSnitch (4228 - SDK 10.8) [Support]
[not loaded] com.microsoft.VirtualPC.Networking.1040 (7.0.2) [Support]
[not loaded] com.pgp.iokit.PGPdiskDriver (9) [Support]
[not loaded] com.pgp.kext.PGPnke (1.0.0) [Support]
/System/Library/Extensions
[not loaded] com.elgato.driver.DontMatchAfaTech (1.1) [Support]
[not loaded] com.elgato.driver.DontMatchCinergy450 (1.1) [Support]
[not loaded] com.elgato.driver.DontMatchCinergyXS (1.1) [Support]
[not loaded] com.elgato.driver.DontMatchEmpia (1.1) [Support]
[not loaded] com.elgato.driver.DontMatchVoyager (1.1) [Support]
[not loaded] com.hzsystems.driver.CDSDAudioCaptureSupport (1.5) [Support]
[not loaded] com.paceap.kext.pacesupport.master (5.6.1) [Support]
[not loaded] com.pgp.iokit.PGPwdeFilter (1.0.1) [Support]
[not loaded] com.roxio.BluRaySupport (1.1.6) [Support]
[loaded] com.squirrels.airparrot.framebuffer (2 - SDK 10.7) [Support]
[loaded] com.squirrels.driver.AirParrotSpeakers (1.7 - SDK 10.7) [Support]
[not loaded] com.wdc.driver.1394HP (1.0.9) [Support]
[not loaded] com.wdc.driver.USBHP (1.0.11) [Support]
/System/Library/Extensions/PACESupportFamily.kext/Contents/PlugIns
[not loaded] com.paceap.kext.pacesupport.leopard (5.6.1) [Support]
[not loaded] com.paceap.kext.pacesupport.panther (5.6.1) [Support]
[not loaded] com.paceap.kext.pacesupport.tiger (5.6.1) [Support]
Startup Items: ℹ️
PACESupport: Path: /Library/StartupItems/PACESupport
Startup items are obsolete in OS X Yosemite
Launch Agents: ℹ️
[running] at.obdev.LittleSnitchUIAgent.plist [Support]
[running] com.amazon.sendtokindle.launcher.plist [Support]
Launch Daemons: ℹ️
[running] at.obdev.littlesnitchd.plist [Support]
[loaded] com.barebones.authd.plist [Support]
[running] com.filemaker.fms.plist [Support]
[loaded] com.microsoft.office.licensing.helper.plist [Support]
[not loaded] com.squirrels.kextinstaller.plist [Support]
[failed] PACESupport.plist [Support]
User Launch Agents: ℹ️
[loaded] com.adobe.ARM.[...].plist [Support]
[loaded] com.adobe.ARM.[...].plist [Support]
[loaded] com.adobe.ARM.[...].plist [Support]
[running] com.genieo.completer.download.plist Adware! [Remove]
[loaded] com.genieo.completer.ltvbit.plist [Support]
[loaded] com.genieo.completer.update.plist Adware! [Remove]
[loaded] com.google.keystone.agent.plist [Support]
[failed] com.Wondershare.TunesGoWatchDemo.plist [Support]
User Login Items: ℹ️
Dropbox Aplicación (/Applications/Dropbox.app)
Genieo Aplicación (/Applications/Genieo.app)
Genieo Aplicación (/Applications/Genieo.app)
Internet Plug-ins: ℹ️
Flip4Mac WMV Plugin: Version: 2.4.2.4 [Support]
QuickTime Plugin: Version: 7.7.3
Default Browser: Version: 600 - SDK 10.10
AmazonMP3DownloaderPlugin: Version: AmazonMP3DownloaderPlugin 1.0.15 [Support]
OfficeLiveBrowserPlugin: Version: 12.2.3 [Support]
Mathematica: Version: 8.0.1.2063850 [Support]
iPhotoPhotocast: Version: 7.0 - SDK 10.7
User internet Plug-ins: ℹ️
WebEx64: Version: 1.0 - SDK 10.6 [Support]
Safari Extensions: ℹ️
Evernote Web Clipper
Slick Savings Adware! [Remove]
Omnibar Adware! [Remove]
MacVeXe
Amazon Shopping Assistant Adware! [Remove]
Ebay Shopping Assistant Adware! [Remove]
Searchme Adware! [Remove]
3rd Party Preference Panes: ℹ️
Flip4Mac WMV [Support]
Perian [Support]
Time Machine: ℹ️
Skip System Files: NO
Mobile backups: OFF
Auto backup: YES
Volumes being backed up:
Macintosh HD: Disk size: 748.93 GB Disk used: 665.91 GB
Destinations:
Mi Passport [Local]
Total size: 2.00 TB
Total number of backups: 99
Oldest backup: 2013-01-04 00:59:11 +0000
Last backup: 2014-11-24 02:17:18 +0000
Size of backup disk: Adequate
Backup size 2.00 TB > (Disk used 665.91 GB X 3)
Top Processes by CPU: ℹ️
38% WindowServer
33% Finder
24% calibre
2% launchd
2% com.apple.WebKit.Networking
Top Processes by Memory: ℹ️
507 MB calibre
301 MB java
258 MB Finder
232 MB WindowServer
223 MB Safari
Virtual Memory Information: ℹ️
126 MB Free RAM
3.41 GB Active RAM
3.29 GB Inactive RAM
1.44 GB Wired RAM
2.89 GB Page-ins
15 MB Page-outs
Diagnostics Information: ℹ️
Dec 15, 2014, 07:06:53 PM Self test - passed
Dec 15, 2014, 07:02:31 PM CVMCompiler_2014-12-15-190231_MacBook-Pro-de-Manuel-3.crash
Dec 15, 2014, 07:02:11 PM iBooks_2014-12-15-190211_MacBook-Pro-de-Manuel-3.crash
Dec 15, 2014, 07:01:51 PM aslmanager_2014-12-15-190151_MacBook-Pro-de-Manuel-3.crash
Dec 15, 2014, 06:57:58 PM QuickLookSatellite_2014-12-15-185758_MacBook-Pro-de-Manuel-3.crash
Dec 15, 2014, 06:57:46 PM QuickLookSatellite_2014-12-15-185746_MacBook-Pro-de-Manuel-3.crash
Dec 15, 2014, 06:57:23 PM QuickLookSatellite_2014-12-15-185723_MacBook-Pro-de-Manuel-3.crash
Dec 15, 2014, 06:56:06 PM calibre_2014-12-15-185606_MacBook-Pro-de-Manuel-3.crash
Dec 15, 2014, 06:55:55 PM mdworker32_2014-12-15-185555_MacBook-Pro-de-Manuel-3.crash
Dec 15, 2014, 06:55:49 PM garcon_2014-12-15-185549_MacBook-Pro-de-Manuel-3.crash
Dec 15, 2014, 06:55:35 PM garcon_2014-12-15-185535_MacBook-Pro-de-Manuel-3.crash
Dec 15, 2014, 06:55:20 PM xpcproxy_2014-12-15-185520_MacBook-Pro-de-Manuel-3.crash
Dec 15, 2014, 06:53:55 PM mdworker_2014-12-15-185355_MacBook-Pro-de-Manuel-3.crash
Dec 15, 2014, 06:51:46 PM mdworker_2014-12-15-185146_MacBook-Pro-de-Manuel-3.crash
Dec 15, 2014, 06:51:30 PM lssave_2014-12-15-185130_MacBook-Pro-de-Manuel-3.crash
Dec 15, 2014, 06:51:30 PM xpcproxy_2014-12-15-185130_MacBook-Pro-de-Manuel-3.crash
Dec 15, 2014, 04:44:18 AM mdworker_2014-12-15-044418_MacBook-Pro-de-Manuel-3.crash
Dec 15, 2014, 01:13:43 AM mdworker_2014-12-15-011343_MacBook-Pro-de-Manuel-3.crash
Dec 15, 2014, 12:07:47 AM mdworker_2014-12-15-000747_MacBook-Pro-de-Manuel-3.crash
Dec 14, 2014, 09:25:36 PM AdobeReader_2014-12-14-212536_MacBook-Pro-de-Manuel-3.hang
Dec 14, 2014, 09:25:34 PM Mail_2014-12-14-212534_MacBook-Pro-de-Manuel-3.hang
Dec 14, 2014, 09:22:33 PM mdworker_2014-12-14-212233_MacBook-Pro-de-Manuel-3.crash
Dec 14, 2014, 09:18:19 PM mdworker_2014-12-14-211819_MacBook-Pro-de-Manuel-3.crash
Dec 14, 2014, 04:52:14 PM mdworker_2014-12-14-165214_MacBook-Pro-de-Manuel-3.crash
Dec 14, 2014, 03:03:01 PM mdworker_2014-12-14-150301_MacBook-Pro-de-Manuel-3.crash
Dec 14, 2014, 03:02:51 PM mdworker_2014-12-14-150251_MacBook-Pro-de-Manuel-3.crash
Dec 14, 2014, 01:14:28 PM mdworker_2014-12-14-131428_MacBook-Pro-de-Manuel-3.crash
Dec 14, 2014, 01:13:34 PM genatsdb_2014-12-14-131334_MacBook-Pro-de-Manuel-3.crash
Dec 14, 2014, 01:12:48 PM lssave_2014-12-14-131248_MacBook-Pro-de-Manuel-3.crash
Dec 14, 2014, 01:12:48 PM mdworker_2014-12-14-131248_MacBook-Pro-de-Manuel-3.crash
Dec 14, 2014, 01:09:13 PM mdworker_2014-12-14-130913_MacBook-Pro-de-Manuel-3.crash
Dec 14, 2014, 10:42:20 AM mdworker_2014-12-14-104220_MacBook-Pro-de-Manuel-3.crash
Dec 14, 2014, 04:04:06 AM mdworker_2014-12-14-040406_MacBook-Pro-de-Manuel-3.crash
Dec 14, 2014, 04:04:06 AM lssave_2014-12-14-040406_MacBook-Pro-de-Manuel-3.crash
Dec 14, 2014, 04:04:06 AM aslmanager_2014-12-14-040406_MacBook-Pro-de-Manuel-3.crash
Dec 14, 2014, 12:44:32 AM maspushagent_2014-12-14-004432_MacBook-Pro-de-Manuel-3.crash
Dec 14, 2014, 12:44:26 AM mdworker_2014-12-14-004426_MacBook-Pro-de-Manuel-3.crash
Dec 14, 2014, 12:44:23 AM lssave_2014-12-14-004423_MacBook-Pro-de-Manuel-3.crash
Dec 14, 2014, 12:44:19 AM aslmanager_2014-12-14-004419_MacBook-Pro-de-Manuel-3.crash
Dec 14, 2014, 12:44:18 AM nehelper_2014-12-14-004418_MacBook-Pro-de-Manuel-3.crash
Dec 13, 2014, 10:55:16 PM mdworker_2014-12-13-225516_MacBook-Pro-de-Manuel-2.crash
Dec 13, 2014, 10:55:15 PM mdworker_2014-12-13-225515_MacBook-Pro-de-Manuel-2.crash
Dec 13, 2014, 06:26:48 PM mdworker_2014-12-13-182648_MacBook-Pro-de-Manuel-2.crash
Dec 13, 2014, 05:13:08 AM AddressBookSourceSync_2014-12-13-051308_MacBook-Pro-de-Manuel-2.crash
Dec 13, 2014, 04:39:35 AM mdworker_2014-12-13-043935_MacBook-Pro-de-Manuel-2.crash
Dec 13, 2014, 04:09:31 AM mdworker_2014-12-13-040931_MacBook-Pro-de-Manuel-2.crash
Dec 13, 2014, 04:08:51 AM mdworker_2014-12-13-040851_MacBook-Pro-de-Manuel-2.crash
Dec 13, 2014, 04:06:42 AM lssave_2014-12-13-040642_MacBook-Pro-de-Manuel-2.crash
Dec 13, 2014, 04:06:39 AM lssave_2014-12-13-040639_MacBook-Pro-de-Manuel-2.crash
Dec 13, 2014, 04:06:30 AM mdworker_2014-12-13-040630_MacBook-Pro-de-Manuel-2.crash
Dec 13, 2014, 04:06:30 AM lssave_2014-12-13-040630_MacBook-Pro-de-Manuel-2.crash
Dec 13, 2014, 04:05:33 AM mdworker_2014-12-13-040533_MacBook-Pro-de-Manuel-2.crash
Dec 13, 2014, 04:03:31 AM iTunes_2014-12-13-040331_MacBook-Pro-de-Manuel-2.crash
Dec 13, 2014, 04:03:23 AM AddressBookSourceSync_2014-12-13-040323_MacBook-Pro-de-Manuel-2.crash
Dec 13, 2014, 04:03:12 AM findNames_2014-12-13-040312_MacBook-Pro-de-Manuel-2.crash
Dec 13, 2014, 04:03:02 AM systemstatsd_2014-12-13-040302_MacBook-Pro-de-Manuel-2.crashFirst you need to get rid of all the malware on your computer starting with Genieo. Also, get rid of:
[failed] com.Wondershare.TunesGoWatchDemo.plist [Support]
[failed] PACESupport.plist [Support]
Startup Items: ℹ️
PACESupport: Path: /Library/StartupItems/PACESupport
Startup items are obsolete in OS X Yosemite
Helpful Links Regarding Malware Problems
If you are having an immediate problem with ads popping up see The Safe Mac » Adware Removal Guide, AdwareMedic, or Remove unwanted adware that displays pop-up ads and graphics on your Mac - Apple Support.
Open Safari, select Preferences from the Safari menu. Click on Extensions icon in the toolbar. Disable all Extensions. If this stops your problem, then re-enable them one by one until the problem returns. Now remove that extension as it is causing the problem.
The following comes from user stevejobsfan0123. I have made minor changes to adapt to this presentation.
Fix Some Browser Pop-ups That Take Over Safari.
Common pop-ups include a message saying the government has seized your computer and you must pay to have it released (often called "Moneypak"), or a phony message saying that your computer has been infected, and you need to call a tech support number (sometimes claiming to be Apple) to get it resolved. First, understand that these pop-ups are not caused by a virus and your computer has not been affected. This "hijack" is limited to your web browser. Also understand that these messages are scams, so do not pay any money, call the listed number, or provide any personal information. This article will outline the solution to dismiss the pop-up.
Quit Safari
Usually, these pop-ups will not go away by either clicking "OK" or "Cancel." Furthermore, several menus in the menu bar may become disabled and show in gray, including the option to quit Safari. You will likely have to force quit Safari. To do this, press Command + option + esc, select Safari, and press Force Quit.
Relaunch Safari
If you relaunch Safari, the page will reopen. To prevent this from happening, hold down the 'Shift' key while opening Safari. This will prevent windows from the last time Safari was running from reopening.
This will not work in all cases. The shift key must be held at the right time, and in some cases, even if done correctly, the window reappears. In these circumstances, after force quitting Safari, turn off Wi-Fi or disconnect Ethernet, depending on how you connect to the Internet. Then relaunch Safari normally. It will try to reload the malicious webpage, but without a connection, it won't be able to. Navigate away from that page by entering a different URL, i.e. www.apple.com, and trying to load it. Now you can reconnect to the Internet, and the page you entered will appear rather than the malicious one.
An excellent link to read is Tom Reed's Mac Malware Guide.
Also, visit The XLab FAQs and read Detecting and avoiding malware and spyware.
See these Apple articles:
Mac OS X Snow Leopard and malware detection
OS X Lion- Protect your Mac from malware
OS X Mountain Lion- Protect your Mac from malware
OS X Mavericks- Protect your Mac from malware
About file quarantine in OS X
If you require anti-virus protection Thomas Reed recommends using ClamXAV. (Thank you to Thomas Reed for this recommendation.) -
So I just bought a great condition Macbook pro 17" with 2gb of ram, and the last owner upgraded the HD to a 500gb toshiba 5400rpm HD....the computer is VERY slow....when loading up anything it take forever, and watching video's freezes it for a few seconds then starts for a 1-3 seconds then freezes again....what can I do? I really like the laptop, but hate the performance...and I don't want to go buy another one....but I have considered a SSD....any idea's before I do that?
Thanks.How much hard drive space do you have left?
Sluggish Finder - Bunch of icons on your desktop? An overcrowded desktop slows down your Mac.
Get rid of needless Finder calculations - Open a window in Finder/View/Show View Options: ensure "Calculate All Sizes" option is unchecked.
Internet related - It's likely that your broadband connection is the bottleneck. You can check your speed on http://www.speedtest.net to see how fast your connection is. If your web browser specifically performs slowly, quit and relaunch it.
If browser remains sluggish, empty its cache.
Safari/Empty Cache
Firefox/Preferences - select the Network tab of the Advanced preferences and click the "Clear Now" button in the "Offline Storage" area.
Application related - Launch "Activity Monitor" - Applications/Utilities - click the CPU heading and see what float to the top. If an application takes up a large chunk of CPU and won't let it go, it could be dragging down your Mac's performance. Quit it by clicking the Quit Process button at the top of the Activity Monitor window.
Too little ram - max out your ram. -
Apple TV song streaming interrupted, very slow sync with keynote
When I try to play a song or a playlist from iphone (4S and 5) or ipad (mini) via Airplay on Apple Tv, the music is interrupted several times, sometimes the first track, sometimes after 3 track, no rules. Wifi signal is good.
Other issue with Keynote on the iPad. I am trying to mirror a deck but it is very slow, I have to wait 2 to 3 sec between each slide
can someone help me?
thank youThanks for the reply. I used iStumbler on the MacBook Pro and could see three other networks besides my own, and they were all on Channel 11. Mine is on Channel 6 and, given there's no overlap between channels that are separated by 5 channels or more, there should be no interference.
However, the Apple TV reports more channels than iStumbler does and there's no way to know what channel they're on. (Hmmmm, maybe I should move the Mac to the vicinity of the ATV 2.)
However, my local network is involved when the MacBook Pro connects to the internet - I'm using Wi-Fi, not Ethernet - so, if the MacBook Pro can upload at 1MB/sec. to the internet (and that's throttled), why is it uploading at 50-100KB/sec. to the ATV 2?
Steve = : ^ ) -
Fast internet connection but very slow browsing
Hi,
For some time now we have been struggling with very slow browsing speeds. Sometimes the web page will not even load. ADSL speed checks show a good up and down speed and shown below and everything appears to run well if we simply download a file.
Do any of the numbers below indicate any problems?
We have various pc's both hard wired and connected wirelessly and the problems are the same on all. The laptop works fine on my office connection.
Any help greatly appreciated.
ADSL Line Status
Connection Information
Line state:
Connected
Connection time:
2 days, 22:27:19
Downstream:
17.55 Mbps
Upstream:
1.053 Mbps
ADSL Settings
VPI/VCI:
0/38
Type:
PPPoA
Modulation:
G.992.5 Annex A
Latency type:
Interleaved
Noise margin (Down/Up):
3.6 dB / 7.0 dB
Line attenuation (Down/Up):
20.9 dB / 11.1 dB
Output power (Down/Up):
20.1 dBm / 12.6 dBm
FEC Events (Down/Up):
8822810 / 44550
CRC Events (Down/Up):
121 / 59570
Loss of Framing (Local/Remote):
0 / 0
Loss of Signal (Local/Remote):
0 / 0
Loss of Power (Local/Remote):
0 / 0
HEC Events (Down/Up):
1805 / 164783
Error Seconds (Local/Remote):
87 / 45535Hi,
Thanks for replying.
line test was fine.
Here are results from bt speed tester
1. Best Effort Test: -provides background information.
Download Speed
15.57 Mbps
0 Mbps
21 Mbps
Max Achievable Speed
Download speedachieved during the test was - 15.57 Mbps
For your connection, the acceptable range of speeds is 4 Mbps-21 Mbps.
IP Profile for your line is - 16.12 Mbps
2. Upstream Test: -provides background information.
Upload Speed
0.83 Mbps
0 Mbps
0.83 Mbps
Max Achievable Speed
Upload speed achieved during the test was - 0.83Mbps
Additional Information:
Upstream Rate IP profile on your line is - 0.83 Mbps -
Ftp is very slow locally with intel solaris 8 with 98 se buffalo ( 100mps)
why? what to check? ping ok.
3 com 3c905b card installed with solaris 8 connected with linksys router.
Buffalo installed in 98 se 100 mps
cable modem with dynamic ip.
I have tried FTP in 98 SE with LINUX 6.0 RH via LINKSYS router with ver 1.37 ( 1.37 is even worser than 1.36-because the status is not refresh but itself) is ok.
but 98SE with intel solaris 8 is very slow with wu-ftp(ipswitch) 1%, then 1%....etc an hour later still 1%. I shut down the solaris try a few times, then it is ok. all connection is tight.
some one said::
The most common mistake that causes bad throughput is mixing
full-duplex and half-duplex stations on the same LAN.
HOWTO solve full-duplex and half -duplex??
thanks for your attention!
SUN learner.why? what to check? ping ok.
3 com 3c905b card installed with solaris 8 connected with linksys router.
Buffalo installed in 98 se 100 mps
cable modem with dynamic ip.
I have tried FTP in 98 SE with LINUX 6.0 RH via LINKSYS router with ver 1.37 ( 1.37 is even worser than 1.36-because the status is not refresh but itself) is ok.
but 98SE with intel solaris 8 is very slow with wu-ftp(ipswitch) 1%, then 1%....etc an hour later still 1%. I shut down the solaris try a few times, then it is ok. all connection is tight.
some one said::
The most common mistake that causes bad throughput is mixing
full-duplex and half-duplex stations on the same LAN.
HOWTO solve full-duplex and half -duplex??
thanks for your attention!
SUN learner. -
Oracle connection is very slow
Hello,
I install oracle enterprise 5 and oracle 11g R2 and when i connect oracle from plsql developer connectoion is very very slow.
What do you think about this problem ?
i don't want to install oracle 11g on windows server !Hi,
Get the network speed/connection checked from the source server to database server. Also check the resources usage on client and server machine for any sign of resource issues.
Regards -
I don't know if other people also have this problem, but I noticed an issue which makes Photoshop CS5 completely useless for me: It is scrolling incredibly slow. With CS4 I am able to scroll much faster and with different speeds. In CS5 it seems like the speed is limited. No matter how much I scroll with my mouse, Photoshop keeps scrolling at the same speed.
It seems like it is not only me: The only website concerning this problem I was able to find is:
http://macperformanceguide.com/OptimizingPhotoshopCS5-Issues.html
Unacceptable scrolling speed with center button
I use the scroll wheel in the center of the Apple mouse constantly. In CS5, this functionality is now broken, because CS5 scrolls only a small amount, very different from CS4. There is no apparent work-around.
Reader Joe N agrees:
I saw your posting about CS5 issues, and I want to add another STRONG vote for the Photoshop mouse wheel scrolling speed issue. I use a Magic Mouse, and the scrolling speed is so poor in PS CS5 that it is totally blocking my creative flow. I have scoured the web for a solution and have not found anything yet...
I also use a Magic Mouse and a MacBook Pro with Snow Leopard. Is there any hope of a fix or a workaround?Thanks so much for replying, Chris. I've just started using CS5 and only used CS4 for a couple of weeks. There are so many variables. and I don't think it's just Photoshop. I'm wondering if the same problems happen in windows 7 (I switched to the Mac the last time I bought a computer.) Probably it's just that everything gets more complicated along with the improvements. : -(
Thanks again,
Peggy -
Very slow wifi with security on network iP4
Hi just wondering if anyone else has had this problem. I decided a couple of weeks ago to put a password on our network to stop strangers from using it. Since then I have been struggling to download large files and the smaller ones are taking much longer than they should. My husband has a 3gs so I tried to download the same files on his phone and they flew down. Now the only way I can find to fix this is to remove the security but this is not ideal. I have tried wpa/wpa 2, does anyone have any ideas of what I can try next?
ThanksOne side effect of WEP (and WPA) is that it reduces the speed of your wireless connection because more information has to be included with each transmitted packet. Depending on the encryption and size of the encryption key, it can slow down the connection quite a bit. With the iphone, it seems to work best using WPA2. Try using a key no longer than 8 alpha/numeric characters.
-
VERY slow performance with CS4 + Save for web
Note: I have done a search for similar issues but can find nothing regarding CS4 and this particular issue. I'm using a MacBook Pro 2.4Ghz w/4GB of RAM and resources are aplenty when the issue occurs.
Issue
My problem is that under certain circumstances the 'save as web' function can take upto 3 minutes before the diaglog box appears. I've had this for some time but only in the last couple of days did I notice something that might be relevant:
Works
1. Open 3 large TIFF files @ 120mb approx (mine are 3 processed RAW files from Capture One / 4200x5600@300dpi)
2. Create a new adjustment layer for each image
3. Resize each image to 72dpi @ 800x600
4. Run a SmartSharpen & flatten layers
5. In each tab (for each image) do 'save as web'
6. 'Save as web' dialog appears in expected time
VERY slow
1. Open 3 large TIFF files @ 120mb approx (mine are 3 processed RAW files from Capture One / 4200x5600@300dpi)
2. Create a new adjustment layer for each image
3. Resize each image to 72dpi @ 800x600
4. Run a SmartSharpen & flatten layers for each image
5. In first tab do 'save as web'
6. 'Save as web' dialog appears in expected time
7. Close this document (tab)
8. Go to the next image (tab) and do 'save as web'
9. Dialog box can take anything from 20secs to 3mins to appear.
10. Close this document (tab)
11. Go to the last image (tab) and do 'save as web'
12. Dialog box can take anything from 20secs to 3mins to appear.
As I can easily go through this process for 50-60 images you can imagine that it can waste over an hour of my time waiting for Photoshop to get it's act together. I assume it's something todo with memory allocation, or that it's processing previews for all three tabs on the first 'save as web', but in any respect it's very annoying. There seems nothing obviously wrong resource-wise at the time of doing these.
Would be interested if anyone else has this issue!
Thanks!I had the same problem when I setup a new computer this week. Here's what I had installed:
Photoshop CS5
Suitcase Fusion 3
The problem was that when I was in Photoshop and used the "Save for Web" export screen, the dropdown menu for the different export types (JPG, PNG, GIF, etc) would take an extremely long time to update the preview of the graphic.
After a few days of research , I found that Suitcase was conflicting with Photoshop. Here's how you fix the problem (or at least here's what I did with my situation):
Open Suitcase
Go to "Tools", click "Manage Plugins"
Deactivate the Photoshop plugin
This fixed the problem immediately and now my Photoshop" Save For Web" feature is working really fast. Hope this helps anyone else in the same boat.
Maybe you are looking for
-
Intercompany Stock transfer for Returns
Hi, Can any one help me in giving solutions for Intercompany stock transfer for Returns. I need the Steps involved the above process. Regards, Kannan
-
Discussion board subject links to replies
We have discussion boards on Sharepoint 2013. When you use Management view (or any other custom view) all subject columns are not linking to items themselves, but list of replies instead (if there no replies, it's not showing anything). Why is this a
-
The app suddenly stopped working. Any ideas ?
-
I want to fix the output type neu permanently.
hi gurus, while taking print output of po.i click on messages and put output type as neu.and then take print preview. but i permanently want fix the output type neu .i dont want to put output type neu every time .so as to take quick preview of purch
-
Multi monitor issues with resolution(?)
At a customer I have got a really strange and annoying problem. The customer has got a Hyper-V VM with 2012 R2 Server as a RDS server aka Terminal Server. One user has got issues with his multi monitor setup. The connection settings seems to be OK. I