No contacs after firmware upgrade on N70

Hi
I did a firmware upgrade yesterday on my N70 using NSU. Of course I did a backup using the uptodate Nokia PC suite. After the firmware upgrade I saved the data back to the phone aagin using the Nokia PC suite. Everything looks good except that no contacts are there.
I did the upgrade again just to make sure that everything went OK with the same result.
Can some help or has the same problem?
Firmware V 5.0638.3.0.1 18-09-06 RM-84
PC Windows XP SP2
Nokia PC Suite 6.82.22.0
NSU 1.2.0en
Best regards
Chris

not sure about your PC Suite version but this has been well documented in these forums and I had the same problem and with N70. I think it was mentioned as a PC Suite issue, or a combined PC Suite issue N70 issue with many people reporting it. Anyway nothing you can do but enter your contacts or transfer from another phone

Similar Messages

  • PC-Suite sync fails after Firmware upgrade of E65

    After firmware upgrade of E65 PC-Suite stops syncing Calendar & Contacts from outlook. No error messages, just "0 entries has been updated".
    - PC-Suite updated to 7.0.9.2
    - Outlook 2003
    - XP Prof.
    Any ideas?
    Solved!
    Go to Solution.

    The funny thing is - the notes are synced???? If I restore some old contacts they'll double up in outlook, so I think the problem is, that the sync app doesn't see the outlook contact & calendar folder.
    Does somebody has an idea?

  • Crippled 192.168.1.1 page after firmware upgrade

    hi,
    i recently upgraded the firmware of my WRT160N V2 to 2.0.03.
    but since then when i login i get a crippled page on 192.168.1.1 with not even a menu. so i cant even downgrade. is there something i can do?

    It is good to know that the issue is resolved
    After firmware upgrade it is always recommended to reset and reconfigure the router and I think that is why you were unable to see the menu on the setup page of your router.

  • T410i SSD user and master password problem after firmware upgrade

    Hello.
    I have problem with my Corsair Force 3 120GB SSD. After firmware upgrade of SSD my master and user HDD passwords are no longer valid. I'm stuck on BIOS screen and cannot unlock my SSD. After firmware upgrade procedure i got BSOD. Same happened during firmware upgrade on my previous SSD (INTEL X25-M 80GB) but after restart everything was OK. Please help!
    Previous firmware version: 1.3
    Current firmware version: 1.3.3
    SSD connected to another computer shows RAW partition data, but firmware version is 1.3.3 - seems like update was successful.

    My X301 Intel x18 got bricked also after a BIOS update then secure erase (was going to sell it). I plugged it to a USB kit and onto a desktop and it was recognised and able to format. But plugging it back to the lenovo it is still a brick. My lucky star there was warranty it was replaced by lenovo.
    You may want to try it and extract the data, if it works. And hopefully you can still format it and made it work pluggin back to the lenovo.

  • No power after firmware upgrade on nomad jukebox zen xtra

    I have the nomad jukebox zen xtra 30gig that froze up over a year ago after i tried to install the firmware upgrade. After the unsuccessful attempt, the mp3 player stopped working.... I mean no power at all. I've changed the battery and recharged the battery from an outside source...still no luck. I can't even try any of the suggestions anyone gives on this site because I have no power.Does anyone have this problem? More important, does anyone have this problem and know of a solution?I've already set my pc back to wmp 0, I have the firmware on the desktop waiting. Now all I need is some power on this unit so that i can try some of the suggestions that seems to be working for people. Thank you

    I have the same problem too, but my unit is a?Creative Normad Junebox Zen Xtra 40GB. I was trying to find a solution to my problem when I read about your problem. I have pressed the reset button, on / off switch, removed the battery, reinstalled the battery, and nothing seems to work. I was hoping you?might get a solution to this problem, so that I might be able to fix my MP3 player. If I hear of a solution, I will let you know, thanks for sharing. Issue:? While updating the firmware to the Zen Xtra 40 GB, the unit powered down and?has never came on again. There seems to be no real reason why the unit should not power up. The battery and the AC adapter are working correctly. I am very disappointed in Creative...

  • HP Laserjet p1102w - after firmware upgrade / Smart Install update - down to 1MB free memory

    Hello,
    I have a Laserjet p1102w running off a laptop with Windows 7 64-bit. Just bought the printer this month.
    After updating the firmware to 20120814 version and updating the SmartInstall update utility for the 20120814 version as well, I am now down to 1 MB free memory (out of 8MB originally). [Another LJ p1102w updated prior to these updates has 3MB free memory.]
    Because I have 1MB free memory, the printer is almost a brick. It can print simple text based pages - however, printing any page with a graphic or a PDF file will cause the printer to take forever to receive data - essentially preventing printing a page on  my new printer (while printing the same page instantaneously on my older nonupdated p1102w).
    Is there any way to fix this problem, given there is no memory upgrade option? Otherwise, this printer is a brick.
    Thank you in advance for a reply - especially from HP.

    Hi cyskim,
    Did you tried turning the printer off and on after updating the firmware? This should clear its memory, including any memory may affected during the firmware upgrade proccess .
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • HP 5524 Wireless does not work after firmware upgrade

    HI,
    I have just purchased an HP5524.  After initial problems setting up the WPA key from the printer screen, I connected via USB, found the printer and swapped to wireless successfuly. I then installed the printer software on all my computers at home successfully over wireless.
    The printer then needed a firmware upgrade to support eprint (?), which is successfully connected, downloaded the fireware, installed and went through the boot cycles successfully. 
    However, ever since wireless will not work.  Before I return it to the retailer as "not fit for purpose" I thought I would ask the forum.  The diagnostics downloaded a tool, which I went through, but this did not offer solutions that I had not already tried.
    Thank you

    Hi,
    Thank you for posting you query,
    In order to resolve the issue, please make sure the printer is placed closer to the router and uninstall the printer drivers already installed and then start the instalaltion and seelct teh connection type as wireless network. Then select use USB to configure wireless and when prompted conenct the USB cable and then select the network and enter the encryption key follow the onscreen  instructions.
    If the issue still persisits, please open the browser and in the address bar enter the IP address of the router and click on GO. This will take you to the router configuration page. On the router page, please click on Wireless Setup  and please make sure SSID Broadcast is enabeld and the Wireless Mode is set to Mixed or 802.11 B/G/N and the Wireless Channel is set to 11 and click on Apply. Then try to connect the printer to the network by using the CD.
    Say "Thanks" by clicking the Kudos Star in the post that helped you.
    Please mark the post that solves your problem as "Accepted Solution"
    (Although I am employed by HP, I am speaking for myself and not for HP)

  • Fans And Voume after FirmWare Upgrade

    Hey there!
    I have two very positive pieces of information, some repeated:
    1) The volume of my speakers and "line out" was weak at best prior to the FirmWare upgrade. Now, it is positively explosive! I mean, the volume control works just like I would have expected. Perfect...
    2) The fans are coming on more consitantly. I can actually hear them now, which makes me wonder... The temp on the Hard Drive has not gone above 92 since I upgrade the firmware (not that I have noticed however).
    Bob

    Hi Bob!
    What did you use to check the temperature?
    I installed the 10.4.6 and the firmware, and now I could cook an egg on the keyboard. I didn't have the heat problem before, now after the updates, I am fried (literally).
    Gus

  • Iomega Storcenter ix4-300d stuck at 95% after firmware upgrade

    Hi,
    I upgraded my device after I got an email that there is a new firmware:
    An update to version 3.2.10.30101 of the Iomega StorCenter ix4-200d software is now available
    I installed the update but now it is stuck at 95% after rebooting.
    Never had any problem before the firmware upgrade. 
    Any advice?

    Hello BelgianTomas
    I recommend that you first power down the unit if the unit has not completed the boot process.  Then re-seat all disks and try booting the unit again.  Please do not try to access the web interface until the power led is solid white.
    Next would be to try moving the internal disks to different bays to see if a different drive order wil allow the unit to boot. 
    If that does not help, LenovoEMC suppor should be contacted for more advanced options.
    LenovoEMC Contact Information is region specific. Please select the correct link then access the Contact Us at the top right:
    US and Canada: https://lenovo-na-en.custhelp.com/
    Latin America and Mexico: https://lenovo-la-es.custhelp.com/
    EU: https://lenovo-eu-en.custhelp.com/
    India/Asia Pacific: https://lenovo-ap-en.custhelp.com/
    http://support.lenovoemc.com/

  • Content Copier wont restore after firmware upgrade

    I upgraded my N95 8GB to the latest firmware this morning (30.0.018), took 2 complete backups using Contect Copier V4 prior to doing so, but after the upgrade every attempt to restore contacts, settings, etc has failed.
    I've tried doing the recommended re-formatting procedure, followed by a restore, which did not help. I've tried restoring individual items only, instead of the whole lot, which also didn't work.
    According to the log at the end of the restore, the restore completed successfully. Reality suggests otherwise though.
    Could anyone please help?
    Thanks,
    Adriaan

    Right, I've tried using OVI, which did NOT resolve the problem. In fact, it gave identical results to the content copier included with the nseries suite.
    I've written to Nokia support who have replied as follows:
    "In this instance, allow me to suggest a few workarounds in order to rectify the issue on hand.
    First, I suggest that you delete any data not needed from your Nokia N95 8GB to free up the internal memory of your phone before restoring the backed up file. I would like to also suggest that you select the content files that you want to restore to the Nokia N95 8GB. Once you have connected your Nokia N95 8GB to the PC and launched the "Content Copier" application, please select the content file types that you want restored on the phone.
    However, if you are still unable to restore the backed up file to your Nokia N95 8GB, there may be inherent issues with your Nokia N95 8GB that may prevent you doing so. In this case, please take your phone to your nearest Nokia Care Point for an assessment. The Nokia Care Point will assess if a repair is required and advise if this may be covered under warranty."
    So it looks as if I'm going to have to take it in for repair...

  • N97 cannot use as modem after firmware upgrade

    Hi, sorry if this is a repeat post but driven to distraction.
    I use my N97 as a modem to connect to the internet from my laptop when I'm away from home. Since upgrading the firmware I cannot connect through 1 touch access or direct through dial up.
    When attempting to connect through 1 touch I get as far as connecting device and then I get the message "Failed to connect device".
    I have removed the modem through internet properties and reinstalled PC Suite (after using PC suite cleaner). I am running windows 7 but was connecting through 7 before the firmware upgrade.
    Now I'm at a loss. Anyone got any ideas?

    Saw another post here that said they make a completely new network with a different name and it worked. I decided to give it a try and it actually did work!!! Don't have any clue why but I don't really care since my network is running again.

  • BEFW11S4 constant disconnect after firmware upgrade

    I was having trouble with my router losing connection every 2 hours or so . I have downloaded and installed the latest firmware and now it keeps disconnecting almost every 30 min. I have a static IP on my main pc and dhcp enabled for my xbox360. I have checked the cables if they were bad by swapping them but the problem was still there. Any help would be very much appreciated.

    After a firmware upgrade, you must reset the router to factory defaults, then setup the router again from scratch.  If you saved a router configuration file, DO NOT use it.
    Also, please list all the static LAN IP addresses that you are using on your network.
    If you are not using the default DHCP server range of 192.168.1.100  thru  192.168.1.149 , then please state your DHCP server range.
    Are you running any peer-to-peer (P2P) software?  If so, this is a known cause for router slow downs and disconnections.  Temporarily stop using the P2P software, then reboot router, and see if this corrects your problem.
    Who is your ISP?  Are you on a cable system?  Some cable systems monitor the MAC address of the devices connected to them, and eventually boot off any MAC address they don't recognize.  If you are on a cable modem, try cloning your MAC address (done in the router), and see if this corrects the problem.

  • Toshiba 47M7463DG no Cloud service after firmware upgrade

    Hi All,
    I have a problem with my Toshiba 47L7463DG. The Cloud services (accessible from the Home button) stopped working after the recent firmware upgrade. Is there something I can do to roll back to the previous firmware version or fix this problem?
    Details:
    Toshiba 2014-051
    May 21 2015
    Software Version 8.1.97.09.01.1
    MBoot Version 00813201
    Shipout G
    Thanks in advance.
    hysten

    Hello,
    I have the same problem.
    I have above mentioned TV since 3 months So far, everything was wonderful.
    Yesterday an update is installed automatically.
    After that all stations were adjusted and I no longer get into the cloud menu.
    So if I press the button with the "house", nothing happens.
    Wi-Fi is enabled and network test was successful. The Red button also works. So I'll be over in the individual libraries.
    Three times I set back the TV .Without Success.
    Once I was able to get into the cloud menu. When I went out of it and want into the menu again nothing happened.
    I also can not access the contents of my USB flash drive.
    The latest firmware is installed.
    Did someone have an idea?
    Thanks in advance
    Jan

  • HP8600 Plus won't send or receive fax after firmware upgrade

    Hi All,
    Suddenly my HP8600, refuses to send or receive fax. I get the message "Can'r send or receive fax" immediatley after power up.  I have a strong feeling that the problem started after an automatic firmware upgrade to version OJP8600_N911a_R1435A  .  Unfortunately there does not seem to be a simple way to downgrade or is there?   HP refuses to tell.  I have checked the telphone line and the connection also tested with another fax machine.  I tried resetting several times without any success. It is just out of warranty and works perfectly in all other respects.
     Do someone have any ideas?
    Thanks in advance.
    Bondra12

    Hello @Bondra12 , welcome to the forums
    I understand you now cannot send or receive a fax, and I am here to share my suggestions with you.
    No, you cannot reverse a firmware upgrade from my knowledge. I would suggest however, troubleshooting the fax problem by trying out the steps from this guide: Cannot Send or Receive Faxes
    If the problem does happen to continue, and I wish that it doesn't, to give us a call to see if you have any out of warranty printer options.
    Please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region. http://www8.hp.com/us/en/contact-hp/ww-phone-assis​t.html
    Best wishes,
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • How to reset the accessible RAM of my CE658A printer (LJ P1102w) back to 8 MB after firmware upgrade

    My printer LaserJet P1102w has a RAM of 8 MB. After a firmware upgrade was made (of 3 time yet), it was shorter than of 6 MB, then of 4 MB, then of 2 MB. I see now (on the configuration setup web-page) the accessible memory is of 2 MB only! How to return accessible RAM back to 8 MB? The guarantee period has expired, I can't write a question to the HP support by e-mail. (All the firmware files were downloaded from the HP web pages. The upgrades were made under the  Windows7_x64 OS.)

    My printer LaserJet P1102w has a RAM of 8 MB. After a firmware upgrade was made (of 3 time yet), it was shorter than of 6 MB, then of 4 MB, then of 2 MB. I see now (on the configuration setup web-page) the accessible memory is of 2 MB only! How to return accessible RAM back to 8 MB? The guarantee period has expired, I can't write a question to the HP support by e-mail. (All the firmware files were downloaded from the HP web pages. The upgrades were made under the  Windows7_x64 OS.)

Maybe you are looking for