No contacts with bluetooth carkit with N70

I've got a Peugeot 407 with a bleutooth carkit. My Nokia N70 (firmware V 5.0616.2.0.3, dd 24/4/06 RM-84) is found and I can make calls but only when i dial with the phone. No contacts are displayed by the carkit.
Does anyone know how come ?

Hi tatwaffe
I tried to check this issue on Mac...First time sync was not done properly...Then i had created a contact in Mac and then tried to sync it with N73 ME using USB...After sync had happened, all the contacts that were in the phone got deleted and only the contact which was created in the Mac got transferred to the phone. Those contacts were not in the phone and mac cal also now Any clues

Similar Messages

Sync contacts with N70

Hello there,
I can syncronise my N70 data (Contacts, notes,...) using "Nokia PC sync" without any problem. However, when I open "Nokia phone browser" from "My Computer" and then choose my phone from the list and then I click on "Contacts" and choose to update my contacts, I get an error message telling me "PC Sync has encountered a problem and has terminated the synchronisation".
It is strange as when I update "Messages" from the "phone browser" I do not get any error and it completes without any problem.
This is the only sync problem that I have. Do anyone have a solution for this issue?
Thank you.

When I use "PCSuite's synchronize" app to synchronize with Outlook, It does not return any error. Actually, it synchronizes contacts with outlook without any problem. The problem appears first when I use explorer to synchronize the contacts. When I click on synchronize on the toolbar of explorer, a window appears showing that it is trying to sync, nothing happens on the phone except Bluetooth icon appears like it sends data, and finally the results window opens showing a warning: "PC Sync has encountered a problem and has terminated the synchronization".
I don't know if it writes also a log file on the hard and if yes, where can I find the log file.Message Edited by zerocode on 23-Feb-2006
10:42 PM

Deblocking phone with bluetooth carkit

When using the E5 with the paired Toyota bluetooth carkit, it fails to deblock itself. Answering calls is not a problem as the E5 auto-deblocks upon receiving a call, but dailing via the carkit does not lift the block. As a result, I must first deblock it manually by entering the deblocking code which only solves the problem for a few minutes. Disabling auto-deblocking is not an option, as it would make the data on the phone vulnerable in case the phone would be lost/stolen. (This is about the code-block and not about the unprotected keypad block.) I have succesfully used HTC's and older Nokia's on the same carkit without this problem arising. Does anyone know how to arrange an auto-deblock when a bluetooth-paired device is being used like a carkit?

Read This.
Btw you need to post this into the Accesories section
Nokia N95
V 20.0.015
0546553

BB Q10 with Bluetooth Carkit from Citroen DS 4

I've bought a Q10 and I'm having problems in pairing it with Bluetooth from my car. I already went to car dealer and asked if this phone is supported by car software and the answer was affirmative.
The questions is that the pairing doesn't work properly. It will pair but functions related with phoning are not working.
Making calls or receive it is impossible. But what is more strange is that car and phone make the connection.
can anybody help?

Duplicate:
http://supportforums.blackberry.com/t5/BlackBerry-Q10/pairing-BB-Q10-with-Bluetooth-Carkit-from-Citr...
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

My iMac will boot, but loses contact with BlueTooth

My iMac will boot, but loses contact with Bluetooth after logging in, and then there is no way to interact with the system. I can only shut it down. Any help in resolving this issue will really be appreciated.
Thanks -
Dudley Warner

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, or by corruption of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output and Wi-Fi on certain iMacs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

Why does my bluetooth mouse lose contact with my MCB

Hello community, my mouse sometimes loses contact with my mbp retina 15' Mavericks, it has a bettery at 50% power. Is this normal? Thank you in advance

even if the battery says it is (half) full, usually it helps to replace the battery.
try just taking it out and then in again, might help temporarely.
re-pairing also might do the trick.
in this order.
Lex

6233 with bluetooth carkit

I have a 6233, I can get the phone paired to the bluetooth carkit no problem, however, apart from the Answer / call button on the carkit answering or ending the call, I cannot get any speech through it.
Do I need to tell the phone to use bluetooth for a carkit connection? I can't find anything about carkits in the phone manual at all.
Any help appreciated.

Read This.
Btw you need to post this into the Accesories section
Nokia N95
V 20.0.015
0546553

No firmware and no contact with PC with zen visio

I wanted to upgrade firmware and followed an instruction that told me to rebuild firmware first and then install the firmware upgrade. The update program doesnt say it is docked - although it states docked in the Vision M screen.
Appreciate any helpMessage Edited by borge on 04-3-20070:50 PM

Ok, I am assuming that either pc suite is so buggy that no one has had a chance to emulate this or that no one has this issue other than me and everyone is synchronising their outlook contacts with their N70 and are still able to us voice Tags?
If anyone is experiencing this issue can they please let me know I am not the only person having this problem or preferably if anyone knows a fix please let me know so I can either ignore and forget ever using voice tags or allow me to use what would be a really useful feature?
I am beginning to think this may be like a Microsoft built in feature
Cheers, B

Has anyone paired their iPhone contacts with a 2009 Honda Pilot?

I recently purchased a 2009 Honda Pilot and want to sync my contacts with the Bluetooth. Has anyone had any luck with the iPhone 4?

I also have a Honda Pilot (without the environment damaging Daytime Running Lights).
I found that the Bluetooth interface is not reliable.
It seems like every other time there is a new version of the iPhone firmware or an update in the firmware to my car radio the Bluetooth interface stops working.
I have since changed to a hardwired dock connector in all my cars. These ALWAYS work.
Just about any car audio shop can install these at a low cost.
They are unaffected by firmware updates, and they charge my iPhone and iPod at the same time. So when I get out of my car I have a fully charged iPhone.
Go hardwired, it will ALWAYS work.
Something like: http://www.bestbuy.ca/en-CA/product/geek-squad-universal-play-charge-solution-fo r-ipod-car-install-kit-gsc70a-in-store-only/10131667.aspx

Open and close multisim contact with LabVIEW

Can I open and close multisim contact with labview and read the receptor estatus (p.e. lamp)?
Thanks.
Attachments:
Dibujo.JPG ‏13 KB

Hi Guddan,
I created a RFC having a query which is taking a long time to execute. So i want to close RFC connection with portals which is via java connector(JCO) before that query and open the connction again after that query.
I guess i will need to understand your requirement a little more in detail, as i understand you have an RFC which has a query within to fetch some data and is taking a long time to do so. In the meantime you don't want to keep the connection open?
My question would be, Is the role of this RFC to only execute the query and fetch the data or does it do something else?
If it does other things and these are independent of the query execution, then you can span a parallel call within the RFC to execute the query and in the meantime the RFC does the other things (or vice versa) hence reducing the overall time taken.
If the sole purpose of this RFC is to execute the query, then you will not be able(i mean to say there is no simple and direct way of doing this) to close the connection after the Query is started and re-establish the connection after its execution, for a simple reason that - how will you know if the query has completed it's execution, so that you can establish the connection back.
Alternate solutions, make this a two way asynchronous call, 1) You invoke the RFC asynchronously and close the connection, the RFC in turn will execute the query and transfer the data to JCO via another RFC call.
If this needs to be a synchronous call, then you will need to optimize the query to its best.
Regards,
Chen

I cloud isue with contacts with 1 apple id but multiple phones?

I have a few questions, grateful for help.
I have four iphones of various flavours. I have ios 5 on all. I have however only 1 apple id which is set to my itunes account as I want to control purchases with my store ID, but that id has been used on each phone.
I have set icloud to sync on all four - but that causes issues with too much information being downloaded to all devices, specifcally on contacts.
So here's my issues:
The set up for contacts with icloud means that unless you allow sync you can't edit them. BUT because they all have the same id everyone gets everyone elses' contacts too - which I don't want.
So - should I set up four separate apple id's one for each user?
Is this different from a store id? Because two of them are used by my kids and I don't want them to have my password for itunes purchases!
Confused - help gratefully received.

Welcome to the Apple Community lizzie.
If you don't want photo stream to sync your photos between devices go settings > iCloud and uncheck photos, do this on each device.

Unable to contact with support... No any way...

Hi all,
I have a very stupid situation... and it seems that this is hopeless.
I have my iPad since from several years and yesterday I had to buy (first time) an application on App Store.
So unfortunately to proceed I had to give a response to 2 security questions an my responses are not correct.
I did not have before the alternative e-mail address on my AppleID so I do not see the link to reset my security questions...
All in all I have to call the Apple Support. And this is the moment were the story begins... My situation is like this, I am from Poland, I have bought the iPad in Poland, now I am located in France (I work there currently). I do not speak french language on acceptable level to contact with french support by phone. No problem with English language for me. So I have decided to call the polish support - the easiest solution - but I am not able to do it, polish support number is special (00800 4411875) and I am not able to call it while being abroad....
So I have decided to choose the option that Apple Support will cal me, why not? Genial! But... I need to confirm the country to which the support will make the call... I cannot choose France because I will be switched to french support, also I cannot select Poland and give there my french mobile number...
So my last possibility was to contact with English support, but the story is exactly the same like with polish support...
Anyone can explain me what I can do in such situation? Because it is tragic, I know that Apple would like to be very user-friendly so everybody will be able to call their support center even if they do not understand the internet page, but for the moment, for my situation it is just a pain in...
After this I really loose my will to buy anything from Apple (I totally forgot about this app which originally I was going to buy...). Thanks...

I have referred your post to the hosts in the hope they will advise, perhaps directly. Hope it resolves your problem.

Server 4: Cannot connect to remote server: "lost contact with the AuthService"

Attempting to upgrade to Server 4; have Server 4 app on my local Mac to administer a remote Mac mini running Server 4. Server app 4 on the mini connects to itself; however, I cannot user Server app 4 on my local Mac to connect remotely to the mini. Have verified the machine name, user, and password are all correct (they haven't changed and worked fine under Server 3.2.2). Console on the local machine shows the following error:
12/27/14 5:56:27.303 PM Server[4193]: Connected to the Auth Service
12/27/14 5:56:27.303 PM Server[4193]: authenticateToServermgrdAs: connection returned an error Error Domain=NSCocoaErrorDomain Code=4099 "Couldn’t communicate with a helper application." (The connection to service named com.apple.servermgrd.auth was invalidated.) UserInfo=0x60800047f780 {NSDebugDescription=The connection to service named com.apple.servermgrd.auth was invalidated.}
12/27/14 5:56:27.304 PM Server[4193]: We have lost contact with the AuthService we will need to reauth
Any ideas on how to troubleshoot? Thanks --

Export the com.apple.servermgrd certificate from your server. Import it on your local computer and ensure that it is set to Always Trust. Ensure that you also follow the directions from the article linked below.
How to administer OS X Server remotely using Server App - Apple Support

I bought the wrong Elements 13:-(. Need to get in contact with some support?

Hello! I have just bought elements 13 and I did it wrong . I have a Mac and i bought for windows. How can i get in contact with someone who could help me solve this?

You need to start at this link:
<Contact Customer Care>
Good luck.

Problems with N70

Problems with N70
Helo! its been six months now i purchased N70, im facing two irritating problems
1: whenever i prees *100# (to check balance) my N70 RESTARTS
2: i cannot switch on my cell if memory card is installed in the phone.
So i wana now is this a common problem or m d only guy who is facing this?
Plz reply
thx in advance.

hi there
try this remove ur mmc and give a hard reset b pressing the following keys.*#7370#.
please note :ALL DATA WILL BE LOST.
and then format ur mmc using a mmc reader.this should solve the issue and check in the software version by pressing the following keys *#0000#.if it is older than 5.0737.3.0.1 then u can get it upgraded.cheers.
tongue is too confused on what to speak

To complete this process, please contact with itunes.

(To complete this process, please contact with itunes.)
I enter the correct information in the card, but I get this error limit of what is the reason?

Yout going to need to specifty the error, and perhaps get some screenshots on here to better facilitate us in assisting you further

No contacts with bluetooth carkit with N70

Similar Messages

Maybe you are looking for