No Contacts with isync on my N73 using usb

hi,
i have got a problem with my N73(Firmware 4.0750.31.2.1) and my iMac (10.5.2). When i use isync to update my calendar and contacts, only the data from the ical is being transfert to my phone but not the contacts. I,m using the original USB cable CA-53. I did already a few resets on the phone and deleted it from the isync and reinstalled it but it still dosen´t work. Sorry for the poor english... i´m from germany ;-)
Thanks a lot
Carlos

Hi tatwaffe
I tried to check this issue on Mac...First time sync was not done properly...Then i had created a contact in Mac and then tried to sync it with N73 ME using USB...After sync had happened, all the contacts that were in the phone got deleted and only the contact which was created in the Mac got transferred to the phone. Those contacts were not in the phone and mac cal also now Any clues

Similar Messages

  • Does Mackie Control work with Final Cut 7 when using USB MIDI?

    I have a Mackie Control Universal Pro connected via USB to my mac and it works GREAT with Logic and all the complimentary Logic Studio software.
    The problem I am having is, when I try to use it with Final Cut, it wont work at all. I have read the post concerning this that was answered by Andy Mees but, I dont use a true MIDI connection, only USB.
    Any thoughts?

    Does Mackie Control work with Final Cut 7 when using USB MIDI?
    No one will know until FCP 7 is released.
    -DH

  • Can't sync my contacts with iPhone 3G since started using iCloud

    Hey guys
    I have an iPhone 4 and an iPhone 3G. before iCloud, I used to sync both of them with my mac and everything would work like a charm. but since iCloud's running and I'm backing up my iPhone to my iCloud account, everything's ok between my iPhone 4 iOS 5.0.1 and Mac OS X Lion 10.7.2.
    The problem is when I want to sync contacts between iPhone 3G iOS 4.2.1 and Mac. My iPhone 4 shows that the contacts are in a group names 'All iCloud' and it seems like I can sync only contacts from the group named 'All from my Mac' to my iPhone 3G. Eventhough I have all my contacts in my Address Book already. And it seems I would be able to sync my contacts if I can get them on my Mac, but how?
    Any Ideas?

    iKaveh wrote:
    Think all we need to do is to move contacts from 'All iCloud' to 'All from Mac' somehow.
    But how?!
    This is not something I've been able to test, but I believe this process will do it:
    Select all your contacts in the 'iCloud' list in Address Book.
    From the File menu choose 'Export>vCard' and save the vCard on your Desktop or somewhere convenient.
    Set 'On My Mac' to be the default account in Preferences.
    From the File menu choose 'Import' and select your vCard.
    Import into Address book, making sure the contacts go into 'On My Mac'.
    You will now have duplicate contacts, and can delete the ones under 'iCloud'.\
    As you will have gathered, you have three choices:
    Keep your contacts under 'On My Mac' and sync them via USB.
    Keep your contacts under 'iCloud' and sync them to iCloud.
    Keep a full set under each category and sync to both. Of course any additions or changes will have to be made twice.

  • Has anyone had troubles with VISA(GPIB) control and using USB?

    I am having trouble controlling a GPIB machine using VISA controls. I am using a USB GPIB cable and the software. But I get errors when I try to use the Intstrument drivers (ex HP4194A) VISA control. If I change to GPIB commands it works fine. Am I calling the unit wrong? Not sure how to get it to work.

    I tried that and I get the following error
    in NI spy Status 0xBFFF00A6
    error out -1073807194
    with IDN? I don't get the equipment info, but get some hex code.
    Attachments:
    visa_test.vi ‏20 KB

  • Need help - I2C write/read with TAOS TCS3414 light sensor using USB-8451

    Hello, I'm new to labview and need help setting up a vi that will allow me to communicate with a digital light sensor (TAOS TCS3414) using a USB-8451. I need to use the sensor to measure light from a light source that I designed and built as part of a project im working on. I've tried looking at several labview I2C exampled but find them to be very confusing. I've used an arduino to interface with the sensor successfully but need to use labview and dont understand how to write the program. The actions are simple; I need initialize the sensor with a simple command and then request data from 8 data registers and then read that data. The data will then be used in further calculations. The portion i need help with is writing and reading from the sensor. I've attached the datasheet for the sensor as a guide. I can also provide the arduino code that i use to read data from the sensor if that would help. 
    Pleae keep in mind that i am completely new to labVIEW. I really do want to learn from this but need quick results so the more help the better. It would greately appreciate any help or explaination. 
    Attachments:
    TCS3414_Datasheet_EN_v1.pdf ‏1806 KB

    Hi Aaron,
    Here you go, this is made with a USB-8452.
    When you run the code tick the power en dac enable box on.
    Maybe you can help me with my problem, I want to use a fiber to sense light from a led.
    Do you use any fiber hardware with the TCS3414?
    gr,
    Attachments:
    TCS3414.vi ‏63 KB

  • How the heck do I sync outlook tasks with reminders on iPhone 5c using USB?  Not at all interested in any over the air methods

    Trying to sync my new iPhone 5c with outlook tasks using the USB connection and can't find any method to do this.  Due to data security I am not interested in sync'ing using any over the air method such as exchange server or iCloud.  Updated from a Blackberry to iPhone due to many recommendations but this apparent non-functionality by Apple is a major disappointment and a significant lack of capability.  Any help appriciated.

    Windows still allows syncing over USB:
    http://support.apple.com/kb/HT1296

  • Mac lost contact with HP color Laserjet 3700 via USB

    Hi,
    Since a few days I can't get connection anymore with my HP color Laserjet 3700 via USB-cable. My Mac recognizes the printer with its name, also states when I plug in the USB that the printer is online. However, when I want to print documents, it states "wait until the printer is available" and no prints are generated.
    Via an iMAC, I tried to print via the same USB cable, and that works fine. I tried rebooting, software updates, all the lot. Nothing worked. I found some technical details via About this MAC and the difference between my MacBook en iMAC is:
    PPD-version = 16.4 on the iMAC and 17.3 on my MacBook
    CUPS-version = 1.4.4 on the iMAC and 1.4.5 on my MacBook Pro
    Who has any ideas what I can do the get printing again?
    Thx,
    Aldert

    Via other threads I found the solution:
    see: http://discussions.apple.com/thread.jspa?threadID=2640270&start=15&tstart=0
    I had the same problem "Waiting for printer to become available... " - HP LaserJet 2500 L with iMAC 11.1 running Mac OS X Version 10.6.5. since the "HP Printer Software Update 2.5.2".
    This also helped for me:
    1) delete all of the items whose name starts with "hp_" in System/Library/Extensions
    2) Disconnect the printer and turn off the printer
    3) delete the printer if it's still there
    4) reset the printing system
    5) restart the Mac
    6) empty the trash
    7) turn on the printer and reconnect the printer to the MAC
    8) reinstall the printer

  • HT1296 Syncing my contacts with my iPad

    I have tried syncing my contacts with my iPad and I only seem to get 886 of my contacts added - leaving out over half of them (I have 1700 plus contacts) - why can't I add ALL my contacts?  Has anyone else had this problem?  Cheers

    This is the first time that you synced contacts with Outlook? Have you used iCloud in the past? How were you syncing contacts before? While a backup can contain contact information, it is not foolproof (as you have discovered). Also, contacts are not stored in iTunes. If you have not done anything since this, try to restore to a backup done before this sync and see if you can recover the contacts. It may not be able to be done. Good luck.

  • JSR-75 PIM API creating Contact with more than one Number (Phone,Fax ...)

    Hi everybody
    I try to create a contact with more than one Phonenumber using the method contact.addString(...) .
    Contact with one single number is no Problem but contacts with more than one Number are ignored and are not stored to the phonebook. I try to add the Numbers using a for -loop. Is there an other way to solve this Problem?
    please Help.
    Thank You.

    Wonder if you have made any progress - if so,
    could you share ?

  • Syncing contacts with my mac and my phone using isync

    Hi
    I have had a macbook for the past 7 months and have bee using isync on an irregular basis and with different mobile phones. So far it has been going well.
    I have recently acquired a nokia 6230 and i have synced it with isync. I thought it had worked.
    I realised the other day that a number of contacts are missing.
    I went back to isync and tried to re-sync my phone to get the entries on my mac to be sent to my phone, but no. I sync seems to think that if a contact isn't present on my phone, then its not needed. The missing contacts are definatly on my mac (31 to be precise) and all i want to do is get them to be sent to my phone along with any other contacts i may add via address book in the future.
    Any suggestions would be amazingly helpful!
    Thanks a mil

    ok fair play, you've helped hugely and its kinda impressive
    its work, exceot for one slight problem, theres about 20 contacts that sync differently compared to the others. They appear with a dash before the name e.g. - John....
    any ideas?? like its easy to fix but its just seriously annoying.
    thanks a mil, great having people like yourself!!

  • I have an Macbook with OS 10.6.8 using Itunes 10.4.1 to sync my Iphone4. The itunes just do not sync my contacts ... No error messages .... nothing ... just do not work ... Does anybody have a clue what is going on ? tks

    I have a Macbook with OS 10.6.8 using Itunes 10.4.1 to sync my Iphone4. The itunes do not sync my contacts ... No error messages .... nothing ... just do not work ... However, It is working for apps, calendar and email. Does anybody have a clue what is going on ? tks

    There is also an option to reset all data on the device with the next sync.
    MJ

  • I am automating the process of sending appointment reminders to my clients. I started with an alert with an email in calendar using the clients email address as a custom entry in my me card in my contacts. this was resulting in three emails being sent wit

    I am automating the process of sending appointment reminders to my clients. I started with an alert with an email in calendar using the clients email address as a custom entry in my me card in my contacts. this was resulting in three emails being sent with slightly different versions of the same address (see my previous post). Heating someone else's suggestion I created a workflow file to send an email and calling that file from an alert on my calendar. This is working and sends only one email to the client.
    My calendar is on I cloud and I access it from three different computers so I can keep my appointment calendar current. The files that send the email only exist on one computer. My other computers show error messages when those emails get sent. It seems that each computer wants to send the email. It's a small problem but is there a way that I could not get those alerts.
    But appreciate any thoughts about this. It seems like both problems might be related to the iCloud system.
    Thank you in advance,
    Michael

    Good work, catch so far Michael, does seem to be a "feature" of iCloud syncing, not sure what you could do to disable it.

  • Having trouble setting up face time to a contact with an iPhone in Perth Australia using my iPad. I can't get it to recognise the number

    I cannot seem to contact a mobile number through FaceTime using my iPad. I have added the contacts number but every time i try to connect it comes up with a message saying face time failed.

    1. Make sure software is up to date
    2. Make sure FaceTime is enabled; Settings>FaceTime
    3. Make sure Date and Time is correctly set; Settings>General>Date and Time>Set Automatically>On
    4. Make sure Push Notification is enabled
    5. Make sure phone number or email address is correct
    6. Hold the Sleep and Home button down (together) until you see the Apple Logo

  • Bought my hubby an iphone4 and I registered it and opened an apple account for him.  I have an iphone 5 (under my own Apple account).  I use icloud to sync calender and contacts with outlook 2007.  How do I add my hubby's phone (account) to icloud ?

    Bought my hubby an iphone4 and I registered it and opened an apple account for him.  I have an iphone 5 (under my own Apple account).  I use icloud to sync calendar and contacts with outlook 2007.  How do I add my hubby's phone (account) to icloud so I can sync the same contacts and calendar?

    On his phone, sign in Settings>iCloud and enable Mail so that he can have his own email address. Then add your account in Settings>Mail, Contacts & Calendars and enable Contacts and Calendars. They will then appear on his phone alongside any syncing he has set up. This will keep your emails separate, or you can add Mail as well so that you can both access that if you want. You can add his account in the same way on your phone and enable any data types you want to sync.

  • How to unmerge contacts with my husband's?  We're using iphone 3gs.

    How to unmerge contacts with my husband's?  We're using iphone 3gs.

    You got to have two different apple id

Maybe you are looking for