No content appearing in Landing Page chips: HR Renewal 1.0 FP 4

Hi All,
We have installed HR Renewal 1.0 FP 4 on the ECC EHP6 system and NW 7.3 Portal.
Have the SAP Gateway system (on NW 7.4) configured separately from the ECC backend system.
We have performed all the configuration steps mentioned in the HR Renewal admin guide to get the landing page.
We are having several issues accessing the landing page.
While trying to access landing page from standard SAP_PAO_HRPROFESSIONAL_3 role in ECC backend system, we get an error and landing page not getting displayed.
2. While trying to access landing page with server/port of gateway system, we got the SPB admin page running, where we can add catalogs and add chips to it. However, when trying to access the landing page for ESS/MSS/HR Admin, the items within partcular chip is not appearing e.g. In ESS, we have chips like Search, MyInfo, MyServices, etc. There is nothing getting displayed within MyInfo chip as shown below and it keeps on loading....
We used F12 to see the errors while running this page. (find the snapshot fig. 2)
fig. 1 fig. 2
As per the HR admin config guide, we have activated all the services under /sap/bc/ui5_ui5. As you can see in the error, it is trying to look for the
services which are present in a different path on the gateway server (The server/host used in this path are that of gateway). The service here in the screenshot - HRESS_MYSRV_G is actaully a part of /sap/opu/sap.
It would be really of great help if you can provide us some inputs/suggestions so that we will be able to get links inside the chips and proceed further.
Also please let us know what steps we need to perform so as to access landing page from ECC backend role successfully.
Thank you,
Radhika

check your config help.sap.com/hr_renewal follow here http://scn.sap.com/community/erp/hcm/blog/2013/07/14/steps-to-configure-hr-renewal-landing-page http://scn.sap.com/community/erp/hcm/blog/2014/04/16/configuration-of-suite-page-builder-ui5 http://scn.sap.com/thread/3422008 http://scn.sap.com/thread/3258765 is oData's are pointing to system alias of DEFAULT software version.? please correct it http://help.sap.com/erp_hcm_ias_2013_02/helpdata/en/ad/becc51e637c00ce10 000000a445394/content.htm?frameset=/en/e6/bccc51e637c00ce10000000a445394 /frameset.htm If you use FIORI and share PAGE BUILDER odata's then make sure you pick up the right oData using the PFCG role as discussed in our call. if you configure the oData's please test using the Gateway Client option in Activate and Maintain Services transaction and access a collection. If this works then your configuration is correct. Note: Also make sure that except oData /IWPGW/TASKPROCESSING (or TASKPROCESSING) which is required for Task Lanes. All other oData's should be registered to DEFAULT software version. Only for Task oData you should use system alias for /IWPGW/BWF software version.

Similar Messages

Issue in Landing page for HR Renewal Feature pack 4

Hi Gurus,
I am trying to config landing page on S/B before doing it in Dev , while executing the MSS role , ESS role and HR Professional role I am getting the below screen shot like this , please advise me , it's urgent , it will be a great help for us
Please go through the screen shot attached
( system is asking for login credentials after entering the details , I could able to see the blank page of SUIT PAGE BUILDER
Thanks & Regards,
Deepak

Hi,
For launchpad activities purely depends on Odata Services.
Please check all the OData services related to ESS , MSS & HR Professional are activated or not.
SAP ERP - SAP Library
provide me the url which you are getting after clicking on any service.
Regards,
cbr.

All my content appears on page load - is this Spry related?

I remember having this issue when using Spry in the past. I changed the padding settings I think, and all the Accordions were open on page load - for only a second - and then closed.
I'm working with a new site, and the template seemed fine but when I populate, all tabbed-content and a scroller content appear on page load. Then snap shut. Is it related? or a similar issue... I'm pretty desperate to be posting here but I it looks like the same sort of problem I had with Spry... maybe the template has been built with some of the same technology (?)
http://bit.ly/ptaBVN
Please help!

Try this:
1. Set a class that sets visibiliity to hidden:
.hideGroup{visibility:hidden;}
2. Add this class to your content group:
<div class="SlidingPanelsContentGroup hideGroup">
3. Add a line to sp_unobtrusive.js to remove this new class
after the widget made.
Spry.$$(".SlidingPanelsContentGroup").removeClassName("hideGroup");
Add that right under the addEventListener lines.
That should do it.
Don

HR Professional Landing Page not appearing

Hi,
We have three system :
1. ECC Backend System
2. Separate Gateway System
3. Web Dispatcher
1. Backend System : Activate all the services as mentioned in various forumns and HR Renewal Administrative Guide.
2. Gateway : Activate OData Services in Gateway System and assigned System Alias.
Activated OData Service. System aliases is Backend System.
3. Created User with same id and password in Backend System and Gateway System
4. Assigned Role ZSAP_PAO_HRPROFESSIONAL_4 copied from SAP_PAO_HRPROFESSIONAL_4 in Backend System.
Assigned http://<webdispatcher>:<Port>/sap/bc/ui5_ui5/sap/ARSRVC_SUITE_PB/main.html?page=SPB_LANDING_PAGE in landing page.
with standard catalogue X-SAP-UI2-PAGECHIP?PAGEID=PAO_HRPROFESSIONAL_02
5. When I am executing above it redirects to Gateway with URL :
https://<gatewayserver>:<port>/sap/bc/ui5_ui5/sap/ARSRVC_SUITE_PB/main.html?page=SPB_LANDING_PAGE
Following error message appearing. "No Catalogue assigned to User"
When I execute the Admin Link http://<webdispatcher>:<Port>/sap/bc/ui5_ui5/sap/arsrvc_spb_admn/main.html catalogue are not appearing.
Thanks,
Kamal

Hi Jwala,
We checked but Issue is we are not seeing the catalog in admin page. Most of the installation in forums are Local Gateway but we have separate gateway.
When I execute the Admin Link http://<webdispatcher>:<Port>/sap/bc/ui5_ui5/sap/arsrvc_spb_admn/main.html
No HR Professional Catalog.
Regards,
Kamal

Announcements /events / FAQs web part in a scrolling fashion on the landing page

hi,
can anyone help how to develop the below kind of UI in my SP 2013 KM portal using cqwp/cewp/ jquery.
i tried with the custom visual web part, but my customer says they want me to use client side / OOTB feature of SP.
i am wanting to display the same in the landing page. so that when end users click "More" they will be navigated to the
All Announcements Page [ may be its a page layout in pages library ].
the other tricky part am seeing is how to show these individual/single announcements in a scrolling manner.
help is highly appreciated!

hi Amr,
in the url you have provided am not able to follow this step:
below :
http://sharepointtweaks.blogspot.ae/2012/07/image-carousel-webpart-sanboxed.html
3- Export the webpart you will prompt to download file named "Content Query.webpart"
i am not seeing the option to export the web part.
from where will
i download file named "Content Query.webpart .

SSRS 2008 R2 report does not print the page header for a html content displaying on multiple pages

Hi
I need to display the html content from the database. The html content are quite long and can have content of 3-5 pages. Issue I am facing is f the record has html content of 3-5 pages, then it does not print the page header (which is a separate tablix) on
second page onwards.
Nikesh Shah
Nikesh Shah

Hi Nikesh,
According to your description, I’m not sure the meaning of Page header in your scenario. In Reporting Services, a page header that run along the top of each page, respectively. Headers can contain static text, images, lines, rectangles, borders, background
color, background images, and expressions. But we couldn’t add tablix in the page header.
If you are saying report header, a report header consists of the report items that are placed at the top of the report body on the report design surface. They appear only once as the first content in the report. So it cannot repeat in other pages.
If you are saying tablix header, freezing column headers are different in table and matrix. For more details, please refer to the following thread:
http://social.technet.microsoft.com/Forums/sharepoint/en-US/c8ddc1af-1bdf-4e72-8aab-0353c7cc848a/ssrs-report-freezing-row-and-column-while-scrolling-issue?forum=sqlreportingservices
If there are any misunderstanding, please elaborate the issue for further investigation.
Regards,
Katherine Xiong
Katherine Xiong
TechNet Community Support

I created a book in iBooks Author using the Photo Book template. When I rotate to portrait orientation, the photo or widget disappears and a table of contents appears with only the interactive media showing.

I created a book in iBooks Author using the Photo Book template. When I rotate to portrait orientation, the photo or widget disappears and a table of contents appears with only the interactive media showing.

Thanx for the prompt response, KT. I have indeed seen that thread, only just after I posted the question.
I have spent hours on the phone with what I now know is a call center in Texas on this question.
I think Apple could be a little more "hands on" with iBooks Author users, and it should also be pointed out that landscape photos will not display in portrait mode.
In my case, I used gallery widgets to display vertical photos, since they look better in portrait mode.
But instead of simply rotating, the page disappears and a TOC of interactive media appears. The gallery behaves as expected when tapped. This is not what I expected, but since the gallery works, I can live with it.
Right now I have "tickets" telling me to "fix" this "problem or to disable portrait mode.
I don't want to disable portrait mode.
Will Apple accept the books if I tell them this is not an "error?"

TS1424 I purchased and downloaded a book in iBooks. I read about 16 chapters. The next time I opened the app to read the book, no words loaded on the pages. It would go to the table of contents, but not to pages in chapters. Any ideas?

I purchased and downloaded a book in iBooks. I read about 16 chapters. The next time I opened the app to read the book, no words loaded on the pages. It would go to the table of contents, but not to pages in chapters. Any ideas?

Try to reset your phone, hold the home/sleep buttons until it reboots and the apple logo appears, don't release the buttons till apple logo appears. If no luck there, Resync the book. Or delete it and redownload it. Downloading past purchases from the App Store, iBookstore, and iTunes Store

Table of contents - title creates automatic page break

I want the title "Table of Contents" to appear above the automatically generated Table of Contents in pages. The TOC covers 3 pages (it's a long document) and I've formatted it and am happy. However, the title for the page which reads "Table of Contents" makes the TOC jump down to another page leaving the title on an otherwise blank page. I have tried re-typing the title, ensuring no page breaks are on the page. I've deleted the TOC and reinserted it at the appropriate place etc. But it keeps jumping down and starting on a new page. Any advice appreciated. I want to the keep the title "Table of Contents" on the same page as the table of contents themselves.

I am having the exact same issue. Long ToC (3 pages), but cannot place a simple headline above it. It automatically breaks the pages and starts on a new page. Any ideas people?
Please see the picture below. I cannot find a way to narrow down that gap between headline and ToC.
Cheers Phil

Related Content Field Mapping using "Page Field" mapping type

In PeopleBooks it refers to a Page Field mapping type whene mapping fields from the component to it's related content.
Is this a misprint in PeopleBooks, did this feature not make it into 8.50.09 or is this option only available under certain circumstances.
I'm trying to pass a non key field from level 0 to the rel content url.
Thanks to anyone who can shed some light on this.
Graham

Hi Jim
Thanks for the reply.
It appears that you can't select the "Page Field" mapping type unless you have the related content specified by PAGE ratehr than component.
PBOOKS states Page Field: use when you want to map the service parameter to any level 0 page field.
In the component buffer fields in level 0 could be any page. I was hoping to pass ANY level 0 field through to the Rel Content URL for any page in this component.
Kind regards
Graham

How to Create a Photo Landing page

I have several photo galeries and would like to use them all in a single site (.mac) publishing with iWeb. The problem lays on the pages structure itself, if I have many to one I can not post all my galeries and use a thumb to call the photo album to that specific selection. I can only create many albums and they all will have the same level as other menu items (welcome, about me, blog etc...) I need to keep all my albums in a single landing page being a child to the " photos " page and from where the visitor should choose which album they will see.
Please let me know if any workaround for this issue.
Thanks in advance,
Kerberos

Sean,
Are you going to take out the "lorum ipsum"
(placeholder text) in the Photo Page menu? Also, you
need to check your links to the albums. they are not
all correct and clicking them brings me to the wrong
album.
Great start!
lori
Lori,
Thanks!! I told my wife that since I did the hard work, she gets to come up with words for the placeholder text and favorites lists underneath them. Alas I am on the road for the rest of the week and she doesn't have a copy of the site on her Mac.
I did a quick check of the links and didn't see any bad ones, that is to say each photo goes to the proper photo album. However, if you scroll slowly down the page you will notice that the mini-picture/links slowly get out of sync with their descriptions, so by the end of the page the picture/link is either beside a totally wrong description or doesn't appear to have one at all. This is an iWeb bug, since each picture has an anchor point in the text. Incidently it appears correct in iWeb itself, it's just when the page is viewed in Safari (and I assume other browsers) that the pictures appear to slowly drift from their anchors.
Sean

ILife 08- problem with Podcast and Blog links on landing page

Hello I have iLife 08, running OS 10.4.11. The Podcast and Blog links on my iWeb landing page appear but don't do anything. All was working fine one week ago. They load, and when you mouse over it the links looks like they are going to work but don't.
Any ideas on what the problem is?
thanks in advance for your time,
-g-

Hi Chad,
Yes. I had a similar problem. The 1st click on an iTunes hyperlink (i.e. http://phobos.apple.com/WebObjects/MZStore.woa/wa/viewPodcast?id=97154883 ) occasionally does nothing for me in Safari. And as you described, the 2nd click usually works. I actually didn't notice the Safari window containing the link closing itself. I'll keep an eye out for that.
I'm running iTunes 6.0.2 with 2.0.3. See if running an update changes anything for you.

How to display full screen in landing page

Hi,
I'd like to create a landing page with own menu bar above, and open the iView in the frame.
any idea how to do this ?
ex.
menu My Company My Customer
iView column 1                   iView column 1
invoices                                  order
Customers                              material
when I click on the iView ex. Invoices, the iView shall display in full screen, but the main menu remain,
layout shall look like this :
menu My Company My Customer
invoice content
XXXXXXXXXXXXXXXXXXXXXXXXX
Kr,
Ben.J.

no, I have already use this but didn't solve the problem.
it will open one column in full screen of the column1 iFrame.
the layout became :
Menu                      My company                                                  My Customer
                             column1                                                              column2
iView                   invoice                                                                 order
                           xxxxxxxxxxxxxxxxxxxxxxxx                              products
intead of
Menu                      My company                                                     My Customer
                             column1
iView                   xxxxxxxxxxxxxxxxxxxxxxxx
Kr,

Landing Page code?

Hi
I have SLES11-x64 + Teaming 2.1. Default Landing Page code is UTF-8, can I change it?

misha,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

Landing page size

Hi everyone,
I created a landing page and for some reason the size did not come out correctly. Here is the site: www.fitnessforherworld.com. The size is 1180 x 523. Any help would be greatly appreciated.
Thanks,
Erica

Hi,
in addition: looking to your source code, I can't see a "size is 1180 x 523." You wrote this:
<img src="Charlotte'sComingSoonPage.png" width="1024" height="700" />
And your page size should depend entirely on how much content you need to display per page and who your target audience is. You could control it for example here: Google labs - Browser Size http://browsersize.googlelabs.com.
A good practice is e.g. to center your webpage with a css advice like:
CSS:
body {
width: 1000px; /*width is only a proposal*/
margin:0 auto; /* with width, this centers page on screen*/
Hans-Günter

No content appearing in Landing Page chips: HR Renewal 1.0 FP 4

Similar Messages

Maybe you are looking for