No "Context Root field" found under General tab

The J2EE 1.4 Beta2 tutorial on using the deploytool says,
For example, to set the context root of the hello1
application with deploytool:
Select the hello1 WAR.
Select the General tab.
In the Context Root field, enter /hello1.
But there is no "Context Root" field. Under the General tab the only fields are WAR Location, WAR Display Name, and Contents.
Any suggestions?
Thanks.

Well, I guess I had to switch to a screen resolution larger than 800x600 to see the Context Root field way down the bottom.
Somewhere it should be spelled out that Deploytool won't work right in screen resolution of 800x600 or less.
Thanks.

Similar Messages

No Network setting under General tab

I am trying to set up tethering. I am on iPhone 3gs, OS6.
I have been advised to go to the General tab in settings then go to Network, there is no Network available.
I have Personal Hotspot set up under Settings, which has bluetooth and USB, but want to set up tethering wirelessly.
Any ideas

Well, I guess I had to switch to a screen resolution larger than 800x600 to see the Context Root field way down the bottom.
Somewhere it should be spelled out that Deploytool won't work right in screen resolution of 800x600 or less.
Thanks.

How to add new value in Classification under General tab via MM02.

Hello Experts,
I've a requirement where I need to add a new material variant configuration value via MM02 as highlighted below. I've also attached the screen shot of CL02, the two characteristics which I need to add (highlighted in red).
Can please anybody tell me the steps to add value in Classification under General tab via MM02.
Many thanks in advance.

zero cool,
Use transaction CL02 , open class in PCL_222_PURO_BOX with class type 300
add characterstic
PCH_COSTING_WGT_DETERM
PCH_COSTING_WGT_A_DETERM
save it.
Now use MM02 and go to classification view , now you would be able to see these characterstic there.
Check and come back.
Thanks
Ritesh

Classification view in General Tab

Dear all,
Our company is implementing SAP and I am very new to QM/PM. I have come across a SAP note regarding calibration paper in which it was stated that dynamical fetching of constant is possible when maintained in the classification of the equipment. In that paper I have seen classification view under general tab. But in our system, under general tab, I have General Data, Reference Data & Manufacturer Data only. My question is How can I bring the Classification view under this tab?
Please advise.
RP

RP
Are you referring to the Reference Table functionality in the characteristic (under the Addnl Data tab)??
This can be used in an equipment (and other objects) to return data from the standard transaction fields into the characteristic e.g. Manufacturer.
PeteA

How to edit file description on the General tab of File Properties.

I have several files that are rather cryptically named. I want to put a more human friendly description in the Description field inthe Properties/General tab but am unable to access it. It seems to get automatically populated with
the name of the file, which is not helpful at all.
Is there a way to do this?
thanks,

Hi,
I just make a supplement, to add more description details to a file, you can refer to the screenshot below:
If I misunderstand your meaning, please feel free let me know.
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

HT4623 My iPod don't have software update link under general menu? How do you update the latest version

My iPod don't have software update link under general tab How do you update the latest version?

To update
The Settings>General>Software Update comes with iOS 5 and later.
Connect the iPod to your computer and update via iTunes as far as your model allows
iOS: How to update your iPhone, iPad, or iPod touch
A 1G iPod can go to iOS 2.2 via iTunes and iOS 3.1.3 via
Purchasing iOS 3.1 Software Update for iPod touch (1st generation)
A 2G to 4.2.1. Requires iTunes version 10.X. If a Mac it requires OSX 10.5.8 or later. With OSX 10.4.11 you can only go to iTunes 9.X which gets you as high as iOS 4.1
A 3G to 5.1.1 Requires iTunes version 10.5 or later
A 4G to 6 Requires iTunes version 10.7 or later. For a Mac, that requires a Mac with OSX 10.6.8 or later
Identifying iPod models

Tax code field under INVOICE Tab to be Mandatory for Inter Company PO

Dear All,
In MIRO Tax code field under INVOICE Tab to be Mandatory for Inter Company PO u2013 ZNB & ZRT for company code 0001.
How do we set as mandatory fields for those two intercompany document types.
Regards,
Teja

Hi
If u want to maintain tax code as mandatory field in PO?
Then SPRO- SAP IMG- MM- Purchasing - Purchase order- Define document types
In this check the filed selection key for the document types.
Then select the SPRO- SAP IMG- MM- Purchasing - Purchase order- Define svreen lay out at document level.
In this for the field selection key select GR/IR control and click on tax as required. and then save
It will not allow to create PO with out maintaoning tax code.
If u want to do tax code as mandatory in MIRO
Then Go to OLMRLIST and make changes accordingly.
Thanks
Raman

Fields under the tab Goods Receipt in process order.

Hello Experts,
While creation of process order, the fields under the tab 'Goods Receipt' are disabled and already checked.
Fields are 'Goods Receipt' and 'Goods Receipt, Non-Valuated'. Fields are 'WEPOS' and 'WEUNB' accordingly.
Whereas when we create the process order of same material but with different plant, the field 'Goods Receipt, Non-Valuated' is disabled and checked and other field 'Goods Receipt' is enabled.
The material is finished product.
Could you please guide us, is there any configuration in order type dependent parameters for the same.
Many Thanks in advacne.
Regards,
Mayur
Edited by: Mayur_PP on Nov 21, 2011 1:28 PM

Hi Niki
For Financial books, MBEW-STPRS would suffice....
This would also generate a CO doc...
But, if you want to anlayse variances in CO, then you need a break up of STPRS i.e. Itemization which is calculated from CK11N and stored in MBEW-LPLPR
BR, Ajay M

How to activate fields under origin tab in the asset master data

Hello Gururs,
While creating asset master data under origin tab there are two fields in display mode . I am unable to change these fields . the fields are 1.) Asset purchase new. 2.) Purchase used. I want to check one of these two check boxes. But they are in display mode. How can i activate these two fields.
In asset master data screen layout also i didnot find these two fields under origin category . Pls advice
regds
Ramachandra

Hello Markus ,
Thanks for your reply. I checked through Group box info then system is showing the following message .
status - DISPLAY
Reason - Authorization for asset view used
In screen layout field i didnt find these two fields . Can you tell me where these settings has been done . How to change the status for these fields.
regds
ramachandra

QM01 - Add new fields under SUBJECTS tab for notification type Q2

Hi Experts,
My requirement is to add 2 new fields to the create Quality Notification (QM01) Tcode under SUBJECTS tab for Notification type Q2.
I followed the following steps to achieve this :
[ SPRO -> Quality Mnanagement -> Quality Notifications -> Overview Quality Notification Types -> Then I selected Q2 and then selected dcreen structure for extended view -> Double clicked on 10\TAB02 ].
Now I arrived on the screen where we have to define the custom screen area and screen number.
But here in this case (Q2 notification type) all the 5 screen areas are already occupied , so where can I add my custom subscreen ??
Please refer to below screen shot for better understanding :
Please help ! Thanks in advance.
Kind Regards,
Ashish Goyal

Dear narendra bora
You can enter the more than two persons in but not on header screen. In operation you can make each seperate person responsible for each operation & that can be entered against each operation seperately. Also if operation is carried out by two person then also you can enter that in the form of split.
But it is not possible to enter two users in reported by field.
I hope this will resolve your issue.
Regards

Add custom field under specific tab

I have a requirement to add a new custom field to the 'change bid invitation screen' in bids/bidders tab(SRM 5.0). I am new to SRM but I understand that to add a new custom field we have to append structure the structure 'INCL_EEW_PD_HEADER_CSF_BID'. But if i append this way, the field appears in the screen under basic data whereas i need the field under the tab bids/bidders tab after I have added a bidder. Is there any way to influence in which tab the custom field is displayed?

Please help me out this

My passcode lock is missing under settings-general tab

Under my settings tab, then general tab I do not have a passcode Lock button? I have installed the 5.1.1 update and it's still not showing up....what do I do....any help is greatly appreciated.

I hate to put the thought in your head, if my guess is not correct, but I'm thinking that you may have gotten a demo somehow.
There is a way that stores can remove the settings from their demo models and it makes sense when you think about it. If the passocde lock setting was in place on store demos models, someone could lock the device with a passocde and the store would have to restore the iPad every night or ten time s day for that matter. The same thing applies to having the reset setting. It could create a mess for the store if these settings were accessible to customers browsing through the store.
Yes - I would certainly take it back, show then the settings and ask them what the heck is going on.

HT4623 The software update option is not available under my general tab...now what

The software update option is not available under my general tab...now what

The Settings > General > Software Update option only appears when you have iOS 5+ installed, if you have iOS 4 then you will need to do the update via your computer's iTunes.
Connect the iPad to your computer's iTunes and copy any purchases off the iPad to your computer via File > Transfer Purchases - you may also want to copy photos and any important documents off the iPad as well e.g. via the file sharing section at the bottom of the device's apps tab when connected to iTunes, via wifi, email, dropbox etc - they should be included in the backup, but it's best to have a copy of them outside of the backup just in case. You can then force a backup of the iPad by right-clicking the iPad 'Device' on the left-hand side of iTunes and selecting 'Backup'.
You can then start the update by selecting the iPad on the left-hand side of iTunes, and on the Summary tab on the right-hand side clicking the Check For Updates button.
Updating to iOS 5+ : http://support.apple.com/kb/HT4972

Any example on how to put csv files under context-root

Hi All,
Where to put csv files under context-root, so that if i give the file link like http://server-name:port/context-root/folder-name/filename.csv to the end user, he/she needs to download the file automatically to his/her machine.
Any examples or pointing to other threads will be help for me and highly appreciated.
Naga.

Hi Puthanampatti,
Thanks for your quick response, the usecase i have is when a pl/sql proc generates the csv file in the utl/tmp directory in our database, and that file will get moved to the specific folder in app server.
now that folder needs to be under the context root, so that we can pass a http link to the user and if he clicks on the link that file needs to get download automatically with the same authentication what we have given to the application.
ADF version used: 10.1.3.5
oracle iAS version: 10.1.3.4.0
Database versoin: Oracle Database 10g Enterprise Edition Release 10.2.0.5.0 - 64bi
and also please guide us in which folder on the application server we need to move the files, so that whenever the user clicks on the link it should ask us the credentials. the security we used is LDAP authentication.
thanks in advance.
naga.

I am trying to print from iphoto to my printer. When I click print on under File tab it says that a theme cannot be found and that a theme needs to be intalled? Why is this window popping up and how I install a "theme" on iphoto?

I am trying to print from iphoto to my printer. When I click print on under File tab it says that a theme cannot be found and that a theme needs to be intalled? Why is this window popping up and how I install a "theme" on iphoto?

To re-install iPhoto
1. Put the iPhoto.app in the trash (Drag it from your Applications Folder to the trash)
2a: On 10.5: Go to HD/Library/Receipts and remove any pkg file there with iPhoto in the name.
2b: On 10.6: Those receipts may be found as follows: In the Finder use the Go menu and select Go To Folder. In the resulting window type
/var/db/receipts/
2c: on 10.7 they're at
/private/var/db/receipts
A Finder Window will open at that location and you can remove the iPhoto pkg files.
3. Re-install.
If you purchased an iLife Disk, then iPhoto is on it.
If iPhoto was installed on your Mac when you go it then it’s on the System Restore disks that came with your Mac. Insert the first one and opt to ‘Install Bundled Applications Only.
If you purchased it on the App Store or have a Recent Mac you can find it in your Purchases List.

No "Context Root field" found under General tab

Similar Messages

Maybe you are looking for