No Contract on the 3G

Can I purchase the 3G from the apple store without a contract from ATT? If so how much would the phones cost?
Thanks

No, you cannot. That will apparently be possible at some point in the future (date not announced). The prices will be $599 for 8 GB and $699 for 16 GB (yes, $400 more than the subsidized prices). Phones will still be carrier-locked to AT&T, just without the 2 year contract.

Similar Messages

Can you modify the price of a contract in the ME32K directly from the item

Hello,
I am in ECC6.0
I need to modify the price of an item in the contract (ME32K WK or MK) but it is grey (only in display). So I must do Item-Condition and then I can modify the price of the item.
Can you modify the price of a contract in the ME32K directly from the item screen?
I have try with several field selections but nothing.
AKTV     Change
MKK     Quantity contract (for MK)
WKK     Value Contract (for WK)
PT0K     Standard item contract
Cheers,
Marta

HI,
If you maintain any condition in the contract line item condition, like freight, discount etc. the landed price gets populated in the line item price field. So if you want to make any change in base price, it has to be changd in the line item condition.
This is because, You can maintain different validity period in condition and maintain different price in each validity period. So which price you want to pick? So the system captures the price from condition and populate it in the item price field depending on the validity period price.
Hope this helped you.
Regards

Error: Check that sender and reciever has same contract and the same bindin

Hi,
I created a client proxy for a dot net web service. Configured logical port in soamanager tcode. Then tested the client proxy using the report program. It gives an error response like this:
- <s:Envelope xmlns:s="http://schemas.xmlsoap.org/soap/envelope/">
- <s:Body>
- <s:Fault>
<faultcode xmlns:a="http://schemas.microsoft.com/ws/2005/05/addressing/none">a:ActionNotSupported</faultcode>
<faultstring xml:lang="en-US">The message with Action 'http://tempuri.org/GetData' cannot be processed at the receiver,
due to a ContractFilter mismatch at the EndpointDispatcher. This may be because of either a contract mismatch (mismatched
Actions between sender and receiver) or a binding/security mismatch between the sender and the receiver. Check that sender
and receiver have the same contract and the same binding (including security requirements, e.g. Message, Transport,
None).</faultstring>
</s:Fault>
</s:Body>
</s:Envelope>
I recorded the request/response in SICF tcode. I took the request that is recorded there in SOAP UI tester, I get the correct response there. Only when i run the client proxy from SAP it gives the above error.
it would be great if any one has solved this before.
thanks in advance.
Regards,
Suresh.

Hi Selva,
Depending the ECC version you're on & the SP level, SAP note 1229690 resolves this problem.
Regards, Trevor

My account 2yr contract ends in Nov 29th 2014, however, i want an iphone. Should i buy it paying it in full 750 dollars or just pay 299 tax and make another 2 yr contract? The reason im asking is im leaving US by May 2015. How much EFT will cost by Ma

My account 2yr contract ends in Nov 29th 2014, however, i want an iphone.
Should i buy it paying it in full 750 dollars or just pay 299+tax and make another 2 yr contract?
The reason im asking is im leaving US by May 2015. How much EFT will cost by May 2015? Do I have to return the device as well? or i can keep the device?

kiyoungtack1,
You have asked a great question! It is your choice how you would like to go about purchasing the iPhone. Do you currently have an iPhone? If so you can trade in your current iPhone and put it towards the purchase of the new iPhone 6 or 6 Plus at full retail pricing. http://bit.ly/GGnDDC Have you checked to see if you are eligible for Early Edge? If you would like us to investigate further into which option would be the most cost efficient to you please private message me so we can review further.
LindseyT_VZW
Follow us on Twitter @VZWSupport

Purchase an iphone with a contract at the apple store?

I Have a $500 apple store gift card that im itching to use, but im not entirely sure if im able to purchase an iphone 6 with a contract with the gift card. Does anyone know if it is possible to do that in canada specifically?

You can get a contract from a physical Apple Store: https://www.apple.com/ca/retail/iphone/
We offer plans with the same rates available directly from the carriers. We’ll take the time to understand your needs. And we won’t recommend one carrier over another or push you to buy more minutes than you need."
If you order online: http://store.apple.com/ca_consumer_340760/iphone you will need to get a contract "by yourself", by contacting your carrier after purchasing the iPhone.

Direct contract in the backend - Classic Scenery SRM 7.0

Hi Masters,
I´m using SRM 7.0 Package 08 in the classic scenery.
I´m trying to create a direct contract of a QUOT acepted and that need to go to the backend.
I´m using two badis:
BBP_DETERMINE_LOGSYS
Where the variable CV_LOGSYS is with the system backend destiny
BBP_CTR_BE_CREATE
Where the variable IV_LOGICAL_SYSTEM is with the system backend destiny.
Where the variable CV_USER is with the user RFC.
The result is generating myself a message: " CONTRACT 4400000041 - WAS CREATED " (/SAPSRM/PDO_WKL455 BPP_PD455)
But that contract is not available in SRM and it is not also available in ECC.
I forgetting something?
Thank you,
Pedro Marques

I believe that it exists yes possibility, as well as it comments on the text of the badi:
Use
With Business Add-In BBP_CTR_BE_CREATE, you can replace or supplement existing contract data in SAP Enterprise Buyer with your own backend structures and tables.
Enterprise Buyer calls this BAdI before it makes the RFC to the backend system to create a contract.
Activities
Implement and activate the BAdI if you wish to create contracts in the backend system and replace or supplement contract data.
Anybody have some idea?
Thanks,
Pedro

RERAPP on Debit and Credit condition of the same contract in the same perio

Hello Gurus
I have a scenario here. My client wants a contract that specifies the tenant as a customer , and also as a vendor.When i try to make a periodic posting run i am getting the following error:
Sales tax data do not define output tax.
Actually i have a debit condition and a credit condition assigned to the same contract, when i probe the error message by double clicking on it , this is the full error text:
Sales tax data do not define output tax
Message no. RECD078
Diagnosis
In Customizing of the contract type, the setting in the user/offerer field specifies whether this is a customer contract (company code is the offerer) or a vendor contract (company code is the user). Depending on this setting, the posting term expects output tax (customer contract) or input tax (vendor contract) as sales-tax data.
Procedure
Switch to maintenance of posting terms, and correct this error there.
how can i assign 2 different tax types one input and one output to the same customer contract.
Very much await your response
David

Hello Gurus
I have tried the option suggested by Rajnikant, but it is still giving the same error message. The issue actually lies on the definition of the contract. This is a commercial lease out in the Offerer User Field on the "contract -change view type details" where you set the contract as either user or offerer. In this case this is a customer contract that should be indicated Offerer " in this field. This automatically detects the tax type to be used as either input or out put tax.
It rather sounds then impossible to assign another tax type to this contracf , ie the input tax.
what can i do to use this other credit condition for the customer in the same contract, or i have to create another vendor contract for the customer.
Much awaiting for your response , thank you so much for your cooperation.
Regards
David

Use of Contract in the Service purchase order

Dear Experts,
I am assigning the Contract for the services as a limit in the service purchase order for a specific service. The system is not checking the limit against the same at the time of the service entry sheet. I do not have the unlimited delivery checked for the line item.
How it is possible to check the limit against the contract upto a certain limit.
E.g. I have a total contract of 20000 USD for 12 months but in this month I only want to avail the services upto 2000USD against the same contract.
How is it possible in the system

If you are with value contract of 2000 usd then it will allow upto that?
You can avial the service as per the coversion to Po with what ever the value with activity.

When will iPhone 5 be available contract-free @ the US Apple Store?

Hello everyone!
Would anyone know when will iPhone 5 be available contract-free @ the US Apple Store?
Thnx in advance

No contract iPhones will likely be available on the 21st when the iPhone 5 becomes available for retail sales. Note though that you can buy an unsubsidized, contract free iPhone which will still be locked to a specific carrier.
If you want an unlocked iPhone, that is also sold at the full retail, unsubsidized price, but Apple has not announced yet when unlocked phones will be available.
Just beware that contract-free does NOT necessarily mean unlocked, so make sure you are buying what you actually want.
Also note that the new iPhone 5 GSM only phone comes in two versions - one for NA LTE channels, and one for European/Asian LTE channels, so be sure you get one that will work with the data networks available where you plan to use it (the non-NA LTE channel version will not be sold in the USA).

Unblock my old iphone 4S and terminate my contract with the new iphone 4S

My contract with the old iphone 4s was over last November but I still cannot use it using the SIM from other carrier. Now I also want to terminate my contract with the new iphone 4s, the contract that will end in December 2015. I am currently out of US, neither live chat nor telephone works for me though I tried both ways many times. Is there any other way that I can contact Verizon customer service? Such as an email address?

Oh no! The last thing we want is to lose you as a customer Lee7. May I ask what's the reason for being out of the US? Are you on vacation and/or for military purposes? If you can send us a private message then we can discuss options.
Thank you...
ArnettH_VZW
Follow us on Twitter @VZWSupport

Can't find the contract in the inbox.

Hi,
After making the required changes, Contract is submitted it for approval, selected the continue and when I try to find the contract in the inbox I can't find it so I can't finish the booking.
Appreciate your input ?
thanks
siva

What is the version? Database Server
RDBMS : 10.2.0.2.0
Oracle Applications : 11.5.10.2
Check the workflow for the OKS Contract Process item type and see which activity it is waiting at or errored out.How do I check. I am new. Do I have use sql query or in the form? What is the steps involved.
You can use WF admin responsibility to check the status.Will a give a try.
thanks
siva

To update the Rental Contract from the Returns Order

Hi,
I have requirement of when i change the Returns order i have to update the Rental Contract of the same Returns order. Please let me know if any user exits are available for the same
Thank You,
Suresh

Hi Sasi,
According to what you have written above, You want to update a Z node under a root node.
But in the coding for association you have written a standard node.
Give the name of the Z interface which is created and in that you will have the 'Z' custom created node.
Try this.
ls_mod>-association = "Z Interface"=>SC_ASSOCIATION-"root_node"-znode.
Hope this helps you.
Regards,
Sanket Vaity.

Copy customer PO in da contract to the call off order

Hi,
Is there a way to copy the customer PO (vbak-bstnk) from the contract to the relevant call off orders? Can this be done through copy controls??
Thanks,
Keshini

Hi ,
You can copy the purchase order no to the subsequent order by making chnages in copy controls.If you want to copy the whole data then do the same as suggested above.If you are not copying the whole data ,but copying some information from contract then request your abaper to add the field VBKD:BSTKD in routine header business data .
Hope it will work.
Regards,
Pasapula.

Will apple be offering a trade in scheme for iphone4 to 4s for us still on lengthy contracts in the uk?

Will apple be offering a trade in scheme for iphone4 to 4s for us still on lengthy contracts in the uk?

I am not looking to terminate my current contract and neither am I complaining about still being tied into a contract. I received my white i4 for free on my current contract.
My question was maybe misunderstood.
What I was trying to get at was, would apple take my current phone as a part ex? I would be more than happy to pay the excess.
Other options would include selling my phone on eBay or to online companies that will buy it, add the rest of the cash then walk into an apple store and buy the 4s.
But this method isn't very practical as I will be without a phone for a few days, whereas if apple offered this sort of scheme, my downtime without a phone would literally be the time it takes to switch the sim in their store.

If i buy an iphone 6 without contract from the US, would it work in other countries with non-US carriers?

if i buy an iphone 6 without contract from the US, would it work in other countries with non-US carriers?

Contract free versus SIM free are different. What you want to do is to wait for Apple to sell the SIM free version of the iPhone 6. See this explanation from the Apple 5S page that details this...
If you buy iPhone for T-Mobile, it will arrive with a nano-SIM card already installed that you can activate by visiting an Apple Retail Store or a T-Mobile store or by calling T-Mobile. If you buy a SIM-free iPhone, you will need to purchase a GSM-compatible nano-SIM card separately. In the United States, you can purchase such a SIM from AT&T or T-Mobile. When you travel internationally, you can use a nano-SIM card for iPhone 5s from a local GSM carrier.
Also be aware warranty service is country specific. So if you buy a phone in the US and it develops problems you would need to return it for service in the US...

So many problems, Super Slow, inundated with apps I never use, yet they still run, No Contract, Can I do something about this? Or am I destined to be contracted for the rest of my life?

I just want to own my phone. I don't like the speed of it after 2 years, if it didn't have so much crap that I never use on it then at least I would know that it is degradation of the hardware and would renew contract and upgrade, but how can I justify that when it is more than likely the system software that is bogging the phone down. Seriously I have lost all of my photos and videos, numerous times. Had my 32g sd card wiped (required me to format it after the camera app saved a picture that was corrupt. Aside from breaking my already broken (removed) phone, what are the downsides? If I am going to end up renewing either way, why would you not try to salvage the already paid for device? If verizon is unable to work with me on this should I take my business (customer since 2005, but lost my data plan so not real inclined to stay other than I've had zero problems in that time frame) I am confused. I don't want the hassle of having to change carriers, but my fear is that I will not be given an adequate option? Any light that could be shone down upon this matter would be greatly appreciated. and sorry, I know this is probably a hot topic (maybe not) but I just want some legit answers and HTC puts the blame square on Verizon. Thanks
Edited as required by the Verizon Wireless Terms of Service
Message was edited by: Admin Moderator

beenycrocker,
I can understand having a phone that is in good working condition. I am sorry to hear about the SD card getting formatted. I use my phone as my digital camera now days. Have you tried to perform a factory reset on the device to see if that will help with the speed of the phone?
Good news! You can always upgrade to a new phone without having to sign a 2 year contact. We do have the great program that is called EDGE. With this program you would get a brand new device at full retail cost of the phone. But those payments are split up into 24 months. Once you have paid off more than 50% of the phone and had the EDGE for longer than 30 days you can trade in that phone and get a brand new device. You can see the full details on that plan here: www.verizonwireless.com/edge Please keep us posted.
Kevin_R
Follow us on Twitter @VZWSupport

No Contract on the 3G

Similar Messages

Maybe you are looking for