No control data maintained for checking group ZI and checking rule A

Dear all,
When i do the availability check in the sales order i got the message as No control data maintained for checking group ZI and checking rule A and finally availability check was not carried out, I check all the configuration under the sd-availabilitycheck and i maintained in material master also..........
Please give me the solution
Best Regards ,
Kumar

Hi,
Did u maintain the scope of availability check like incluke reqts,planned reqts, purchase requisitions, production order, sales reqts,delivery reqts etc.
apart from that you have to put check(Tick) mark in Requirment class and scheduleline categorie
Then u have to maintain in material master individual requirmentss or daily requirments
checking rule like A,B or if its consignment AW if it is returnable packaging AV etc(ImgS&D-Basicfunctions-Availabiltycheck&Tor---availability check aginst ATP)
Then Total summarized daily reqts or summarized individual requts
Plz check above all setting then u will get clear idea.
Regards,
Murthy

Similar Messages

Sales Order VA01 - "No control data for checking group 04 and checking rule

Dear Gurus,
When saving a sales order in VA01, I get the following message: "No control data for checking group 04 and checking rule A"
Can anyone explain to me what that means?
How can I correct this error?
Regards
Chris

Check this thread
[Re: Process Order Material availability check error|Re: Process Order Material availability check error;
thanks
G. Lakshmipathi

Data source for deposit advice xml and check writer xml

Could someone please tell me where I can find the data source for the Deposit Advice XML and Check Writer XML programs. Since these executables are now a spawned process (PYUGEN), I don't know how to get to the data source. I was able before to look at the queries in PAYUSPST.rdf and PAYUSCHK.rdf. Where are these queries located now? Any help is appreaciated.

Hi All,
I applyied the patch 6399100 and i got the seeded Check Writer (XML) and Deposit Advice (XML) programs.Im able to run the Check Writer (XML) with Parameter (Check Style :Seeded Archive Check Writer Template ) but where as the im unable to run the Deposit Advice (XML) due to Error msg: "No enties found for list of vales"for the 'Check Style' Parameter.
And for the above (only for Deposit Advice) i am not able to ecexute the SQL script given in the Doc ID : 459306.1 due to the error msg : cannot insert NULL into ("HR"."PAY_REPORT_CATEGORIES"."REPORT_GROUP_ID") if i see query the select * from apps.pay_report_categories where short_name like 'ARCHIVE%' there is no record exixts for ARCHIVE_DEPOSIT....
for this we required any other patch/setups.
And is the "Third Pary Check" will support XML Publisher ??
Any respose will be greatly appriciated.
Thanks,
Madhu
Message was edited by:
user589951

Check the settings for checking group 02 and checking rule BO

Hi,
I am doing Backorder processing for order , I am getting the error as follows,
I have checked Checking Rule For Updating Backorders. Everything ok.
Please suggest.
Thanks,
Pramod

One Probable reason for you error.
Check the TC: OVZ2 whether you have ticked the Block qty req. for the Checking group 02 or you have selected No checks.
The standard setting for 02 should not have any tick..
or _Check in the TC : se38 program : SAPLOPP3.
Check whether you have defined the plants with the checking rule BO.
This must be your error._
reward points if helpful,
regards,
Amlan Sarkar

Excise duty: error 9914 No material data maintained for company code

Dear all,
when executing transaction /BEV2/EDDS I get error 9914 No material data maintained for company code in some material documents.
However, I see material is correct.
Can you tell me which views of material master am I missing?
What do I need to check?
Thanks in advance,
F

Settings in material master "Basic view 1"

Archiving control not maintained for CIR document .T-code MD82

Hi All,
I have archived sales order till 31/12/09 in the production system, but the Customer Independent Requirement that is
CIR documents (MD82) are also there in vbak table ,now i have closed all the open document by putting rejection reason.
When i am trying to archive the document it is giving the error "Archiving control not maintained for the document" .please
suggest where to maintain these archiving control and what is to be maintained.
Thanks and Regards
Abhilash Nayak

Hi,
Check your entries in tcode VORA.
Regards,
Eduardo

Number group not maintained for CO code section and business place

Hi Experts,
I am Facing this error 'Number group not maintained for CO code section and business place' while posting TDS entry ,
I have maintained the number groups for internal challan numbers and i have also checked the table 'J_1IEWTNUMGR_1' , the entry exists, I am not able to track the problem.?
the below mentioned are the example of the entry which is maintained inspite of which am facing the error.
company code - 4001
Business Place 4384
Section 194I
Thanks in Advance,

Dear,
Please check whether you have maintained entry in SPRO>IMG>Financial Accounting>****>Withholding Tax>Extended Withholding Tax>Posting>Certificate Numbering for Withholding Tax>Numbering Concenpt4 :Assign Numbering Group
If not then please maintain the same.
Regards.
Vivek

SharePoint PPS 2013 Dashboard Designer error "Please check the data source for any unsaved changes and click on Test Data Source button"

Hi,
I am getting below error in SharePoint PPS 2013 Dashboard Designer. While create the Analysis Service by using "PROVIDER="MSOLAP";DATA SOURCE="http://testpivot2013:9090/Source%20Documents/TestSSource.xlsx"
"An error occurred connecting to this data source. Please check the data source for any unsaved changes and click on Test Data Source button to confirm connection to the data source. "
I have checked all the Sites and done all the steps also. But still getting the error.Its frustrating like anything. Everything is configured correctly but still getting this error.
Thanks in advance.
Poomani Sankaran

Hi Poomani,
Thanks for posting your issue,
you must have to Install SQL Server 2012 ADOMD.Net on your machine and find the browse the below mentioned URL to create SharePoint Dashboard with Analysis service step by step.
http://www.c-sharpcorner.com/UploadFile/a9d961/create-an-analysis-service-data-source-connection-using-shar/
I hope this is helpful to you, mark it as Helpful.
If this works, Please mark it as Answered.
Regards,
Dharmendra Singh (MCPD-EA | MCTS)
Blog : http://sharepoint-community.net/profile/DharmendraSingh

No Assignment of Payroll Data to BW Month for Country Grouping 10 and 13

Hi Gurus,
I get the error "No Assignment of Payroll Data to BW Month for Country Grouping 10 and 13" when extracting data for 0PY_C02. I then added the "End Date of For Period" in the SBIW in the Payroll systen activity "Assignment of Payroll Data to BW Month". I am still getting the same error???
Also I do have data in the cube from that extraction, but when I run a query I get no data?? Is this due to the above error?
Thanks,
Garth

Hi,
The extractor runs without errors in RSA3 in the source system. The error is red with the test of "No Assignment of Payroll Data to BW Month for Country Grouping 10 and 13". I completed the SBIW task to set this in the source system but I still get the same error?
Any other ideas?
Thanks,
Garth

Data Validation for SD Sales order and Deliveries

Hello All,
We activated the data flow for SD sales Order and Deliveries for Infocubes 0sd_co4 and 0sd_c05 and there correspoding datasources.
I have 2 queries
1. How to validate data for BI SD sales order with ECC.
2. How to validate data for BI SD Deliveries data with ECC.
Kindly help, <removed by moderator>.
Thanks,
Rakesh.
Edited by: Siegfried Szameitat on Jun 21, 2011 12:51 PM

Hi Rakesh,
You have to check the tables in R3 and then compare with the Datasources in BW.
For Examples
VBAK table in R3 for Sales Order on BW-2LIS_11_VAITM
VBRK table in R3 for Billing iin BW-2LS_13*
Check for that day how many sales order were there in VBAK table and there in BW.
Rgds
SVU123
Edited by: svu123 on Jun 21, 2011 8:19 PM

TS3276 can anyone help on the following please. When I have been away from the office for a few days and check for emails it only supplies the most recent 100 emails and the ones before that are never received. thanks

can anyone help on the following please. When I have been away from the office for a few days and check for emails it only supplies the most recent 100 emails and the ones before that are never received. thanks

Does your server have a limit?

Open Interface for Approved Supplier Lists and Sourcing Rules

Hi All,
Is there an open interface or an API available for Appeoved Supplier Lists and Sourcing Rules.
Thanks and Regards,
MPH

Hi sandeep,
I prefer to use the API mentioned.
However this is in Oracle Manufactirung and we dont use that module instead I want to define them in Oracle Purchasing.
can I still do it in Purchasing using the same API.
Further as per the document there are 3 entities
01) Sourcing Rule/Bill of Distribution
02) Receiving Organization
03) Shipping Organization
Do I need to define all 3 in order to make it work?
Thanks and Regards,
MPH

Data source for Deposit Advice (XML) and Live CheckWrite (XML) reports

Hello All,
We need to customize the Deposit Advice (XML) and Live Check Write(XML) reports to accomodate a few business requirements. We already have customizations for these reports in non-XML versions. For Ex: USPAYPST.rdf for Deposit Advice report. As these non-XML RDF reports are going to be unsupported by Oracle soon, we need to customize the XML versions of these report available in R12.1.3.
As these reports are kicked off by the PYUGEN spawned program, therefore I need information on the data source for these reports as soon as possible.
Looking forward to your prompt help.
Thanks,
Rahul

Now, I have anew problem here. I modified the USPAYPST.rdf report for Deposit Advice and then changed concurrent program output to XML from Text.
I attached a RTF template to the concurrent program to have the output in XML.
When I run Deposit Invoice Report from the SRS window, it finishes off normally and log file says the number of records processed but no output file is generated.
I also tried looking into the XML generated through View XMl and there too no output file is generated.
I am confused if the Deposit Advice program can only generate Text output. As PYUGEN is the executable for this report, I have no idea if XML file can even be generated.
All pointers to this issue are welcome.
Thanks,
Rahul

Check group membership and export result to file

Hi everyone,
Could you please assist? I need a script that get's a samAccountName from a text or csv file, then checks if the user belongs to Group A or Group B or Group C. If user belongs to group A, then output "Group A" and so on. Sample
output file:
JDoe Group A
JSmith Group B
KSmith Group C
DDoe Group A Group B Group C
Thanks in advance,

Hi Phathuynh,
We always recommend you can start your own script, and post the current script and the issue for a better response.
In addition, you can also refer to the cmdlet "Get-ADGroupMember" to list the members in group, and the script below is for your reference:
$output = @()
$groups = "user1","user2"
$array1 = Get-ADGroupMember Group1|select -ExpandProperty samaccountname
$array2 = Get-ADGroupMember Group2|select -ExpandProperty samaccountname
Foreach($u in $groups){
$user = Get-ADUser $u|select -ExpandProperty samaccountname
$param = @{"user" = $user
"group A" = ""
"group B" = ""}
$p = New-Object Psobject -Property $param
if ($array1 -contains $user){
$p."group A"= "YES"
if ($array2 -contains $user){
$p."group B" = "YES"
$output += $p
$output
The screenshot of result:
If there is anything else regarding this issue, please feel free to post back.
Best Regards,
Anna Wang
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

What Service Restarts the Data Calculations for Cisco Supervisor Desktop and Wallboards

Hello All,
UCCX version 8.0.2.11005-20
UCCX is running in HA mode.
Yesterday we believe our UCCX Servers failed over due to a network outage between the Publisher and the Subscriber.
So last night I restarted the "CCX Engine" to fail-back the servers, which worked just fine.
Now today the database that our Wallboard uses is not showing any data. So I ran some SQL statements on both Servers' CLI and the Database db_cra is showing old data on the Subscriber and the Publisher is showing all Zeros. But after just looking at the Real-Time Reporting page on the Web GUI, that "seems" to be working but I'm not positive because I have nothing to compare the numbers to...
When I try to run Supervisor Desktop, I can open the Program, sign-in, and then when I choose the "team" and then try clicking on a CSQ Name, Supervisor freezes and I get a "Not Responding" message. I thought it was just my PC but this is happening for 2 other people as well, on 2 completely different PCs so I can rule out that its the computer that is killing Supervisor.
Is there another service that needs to be restarted in order to get this working? I tried restarting the service for "Cisco Desktop Recording and Statistics Service" and I was nervous about restarting anything else because we are currently open and our CallCenter is taking calls.
Any thoughts would be much appreciated!
Thanks in Advance,
Matt

Has your problem cleared up? Did you do anything, such as a reboot or open a TAC case?
Anthony Holloway
Please use the star ratings to help drive great content to the top of searches.

No control data maintained for checking group ZI and checking rule A

Similar Messages

Maybe you are looking for