No cost booking against sales order+line item once accontng release is done

Dear all,
I want to stop all cost bookings against a sales order + line item once the accounting release for that item has been done.
By cost booking i mean, all such transactions that are done for a sales order + line item that involve cost booking. Like, MB1A should not allow any goods issue against that sales order + item once accounting release is done.
Is it possible to that in sales order? Like by using any status at item level.
Please guide.
regards
SAPshed

Hi Ajay,
We have not kept automatic cost estimate marking during saving of sales order as costing dept wants  to confirm whether costing for the SO is correct or not.
Hence we have to use CK51N.
Now the problem is for any change in any line item of a sales order is changing the costing status from "VO" to "KA" for all line items of the given sales order in table KEKO.
This is causing measure problem as production people are facing problem while making any change in production order as already there is a check put in CO02 that if cost estimate does not exist for underlying sales order, then change in production order should not be allowed.
Similarly production order creation (converting planned order to production order) is getting held up.
Costing user has to repeated run CK51N for all line items of a single sales order if there is any change in any single line item of the sales order.
Hence pl. help and suggest as to what is to be done now.
Regards
Ratna

Similar Messages

  • Re-Cost (CK55) Marked Sales Order Line Items

    My current client resets standards each quarter. They have requested to re-cost open CTO Sales Order line items and update the valuated sales order cost (EK01). I have reviewed the options available in CK55 - Mass Costing and find the processing log retrurns the following message:
       Cost estimate with status VO exists. See long text
       Message no. CK_MCSO014
       Diagnosis
       A cost estimate with the status VO already exists. This cost estimate will not be overwritten.
       System Response
       Processing continues with the next item.
       Note
       You can remove this message from the log with the customizing transaction User-Defined Error Management for Mass Costing of
       Sales Documents. The item will still not be costed, however.
    Short of manually re-costing each open sales order line item. Is there a way to re-cost open CTO Sales Order Line items?
    Regards,
    Dewayne Wesley

    I didn't realize there was a MASS Cost transaction.
    Is there a MASS delete Sales order Cost estimat transaction? That would help.

  • VA01 Sales order (line items) and different Cost center assignment

    Hello gurus,
    im searching for solutions how to assign different cost center to sales order line items, but only thing that i found is the substitution (Using Substitution (GGB1) to change Cost Center assigned in (OKB9))
    Trying to do this i was unable to create something that could work, since there was no Logistic.
    Could somebody explain me the Line item in SO assignment to Different cost centers?
    I know alot about OKB9, VKOA and other transactions, but still cant find anything suitable to solve this issue
    Best regards
    Laurynas

    What i mean is that, on the end of every month we are gathering information for Statistical Key Figures (from Controlling) entering as CO document and then distributing the costs using KSV5 TC on Internal Orders according those entered statistical key figures.
    i.e. we got INCOME 1000000 from 10 internal order, which we distribute on even percentage parts like 10 cost center, each getting 10% of the income.
    I tried to create the SO, but the Profit center field, after i entered a number, was changed automatically into another.
    And the posting didnt reach Controlling and the assigned Cost center. I think it is a lack of configuration.
    Regards
    Laurynas

  • Can we modify sales order line item before its booked through API?

    can we modify sales order line item before its booked through process_order API?
    here we have a situation where related item should be substituted for actual order item when user selects the related item , So looking for a way to modify the ordered item on sales order line .
    Thanks,

    Hi
    There is an API to update the Related Item on the line level in the Sales Order.
    PROCESS_ORDER API can be used for this purpose. It is part of OE_ORDER_PUB.
    Below are the fields on line table type that will be assigned to create an order line with related item and original ordered item.
    ORIGINAL_ORDERED_ITEM : Original Item
    ORDERED_ITEM : Related Item
    ITEM_RELATIONSHIP_TYPE : Type of Relationship.
    Please go ahead and try to create it like this. I am pretty sure that it will get the order created with related items.
    Note: Please make sure the profile option
    OM: Enable Related Items
    should be enabled.
    Please mark the response as helpful or correct if it provides you the solution.
    Thanks
    Mirza Tanzeel

  • Sales order line item as cost object

    Hi all,
    I am looking for a document on configuring sales order line item as a cost object.
    Also by doing this, does this mean it is unnecessary to specify a cost center/profit center in the SO line item, since the costs/profits will be captured in the line item itself?
    Any links would be helpful,
    Thanks

    Hi,
    Please refer the below link..
    http://sap.ittoolbox.com/groups/technical-functional/sap-acct/sales-order-line-item-as-cost-object-1843181
    http://help.sap.com/saphelp_470/helpdata/en/90/ba7096446711d189420000e829fbbd/content.htm
    Kuber

  • Sales Order Line item status with Resource Related Billing

    Hi
    The Resource related billing is done based on the costs accumulated on account assigned WBS Element. The WBS Element system status is set 'Finally Billed'. The overall status of Sales Order line item is still 'open' and does show up in 'Open Order' reports.
    SAP vide their note 439288 recommends running report SDVBUK00 to correct the sales Order item status. However this note is applicable only upto 4.6C. Our system in ECC 6.0. We tried running this report and did not get desired results. We checked the program and discovered that the corrections suggested as per above note, are not available.
    Is there any new SAP note applicable for ECC 6.0 needs to be applied ? Or is there any other report needs to be run in case of ECC6.0?
    Thanks in advance
    with regards

    HI,
    Please raise message to SAP through service marketplace.
    Thanks,
    Vrajesh

  • How to set Confrimed quantity as 0 in the sales order line item

    hi all
    i have a requirement that my user dont want to see confirmed quantity in the sales order line item.
    scenario is make to order.
    i have set strategy group is 20 -make to order
                                            MRP Type is PD
                                           Lot size -
    EX , still its showing confirmed quantity.
    could pls any one tell me how to set 0 quantity in the sales order line item
    thnx

    Dear Sateesh,
    If the availability check is carried out and stock is not there in our plant, then it will show the confirmed quantity as Zero.
    If you don't want to carry out the availability check,
    To achieve this,
    1. Remove the availability check in the transaction OVZG against your requirement class.
    You can find the requirement type assigned to the sale order in the procurement tab.
    In OVZH transaction, you can find the requirement class assigned to your requirement type.
    2. Remove the availability check for your schedule line category in VOV6.
    In the material master MRP3 view, you ll be having Availability check, there you need to specify the availability check..
    If you specify it as KP(No check), then it will confirm the qty, though the stock is not there in our plant..
    To meet your requirement, you have to prefer user exit.(Correct me if I am wrong)
    Thanks,
    Venkatesh.S.P

  • Sales order line item delete error for MTO sales order

    Dear Experts
    iam facing below error for MTO sales order line item deletion
    "For reasons of cost management, item 000040 cannot
    be deleted"
    Please help
    Regards,
    KEdar

    It looks you try to delete the sales order line item and you get this error message.
    Try to put reason for rejection for the line item and save the order. This is equal to deleting the line item.
    You can also refer the OSS note 14097 - Order item cannot be deleted/overwritten for further information.
    Regards,

  • Third Party GRN Posting Date to be Copied to Sales Order Line item Billing Date

    Hello Experts
    I have a client requirement where in they want to bill line items in the sales order ( third party process ) to the end customer in sync with the GRN posting dates happened in the PO
    For EG if GRN happened on 1st July 2014 then Billing Date should come in as 31st July 2014 so when they execute VF04 giving from and to dates as 1st july to 31st corresponding sales order can be invoiced
    Actual problem is for suppose if i create a sales order in the month of june say 26th basing on the factory calendar setting and invoicing list maintained in the customer master system defaults the billing date to 30th June 2014 , and the same when user runs VF04 from 1st June to 30th June this sales order shows as due and mistakenly end user invoices the customer ( whereas logical GR would have only received in July 1st )
    My requirement is similar to below threads but i am unable to find answer how to copy GR Posting date to Billing Date of the sales order line item
    use GR Doc date as billing date
    3rd party sales process (w/o ship notif) - Billing

    Hi Lakshmipathi ji,
    As my requirement is to update the billing date at the sales order line item level , As a process user goes in executes VF04
    For Ex
    Sales Order Created Date is 1st June 2014 then System Defaults Billing Date at line item to 30th June 2014
    Now when i do GRN suppose on 1st July 2014 for that line item , system should trigger a code where in check the posting date of the GRN and override the same in the Biiling Date field of the sales order line item
    So when VF04 is run for a month All the GRN which are recieved in the month of July are invoiced in July
    Please share me your thoughts do we need to check any userexits from MM side which reads the posting date of GRN and then copies in to my third party sales order
    Regards
    Hiba

  • Sales order line items delivery cancelled but still appears in MD04.

    Hi PP Gurus,
    In the sales there are 6 line items are there out of which for 1 line item delivery and PGI happened. And for remaining line items delivery got cancelled, but these line items for which delivery cancelled appearing in the MD04, I have rejected the sales order line items but these line items still shows in MD04. Please advise how to remove these line items from MD04.
    Thanks and Regards,
    SHARAN.

    Hi
    Pl refer SAP Note : 1166713 for the Problem which says " You have posted goods issue and therefore the delivery requirements should no longer be existing. These inconsistencies can be seen using report SDRQCR21"
    Regards
    Brahmaji

  • How to upload sales order line items?

    SAPGurus,
    For years my customer service department has been asking for a way to upload sales order line items into the VA01 sales order-entry screen.
    Many of our customers submit PO's with huge amount of line items, up to 1,000 lines. Our CS reps need to key in the data line by line (or copy/paste
    approx 17 lines at once from Excel into the VA01 screen), and we are looking for a way to make this process leaner. One idea we have is that user creates the order header, and then has a way to upload the material numbers and quantities in a separate (newly created Z-transaction) screen in one go.
    Obviously rules then need to be built that deal with the various pop-up messages related to e.g. ATP, material status, etc.
    Does anyone have any experience or thoughts on how we could achieve this? A way to make the sales order-entry process a bit less time-consuming? Any feedback would be greatly appreciated !
    Thank you,
    RVS

    Take the inputs from this Blog created by  SUNIL PILLAI                   
    Sales Documents upload  using Standard Direct Input Program in LSMW
    G. Lakshmipathi

  • How to Find Out The Production Order Number For The Sales Order Line Items

    Hi All,
    I want to know the number of production orders for each sales order line item. I know the sales order number .Can anyone tell me how the tables can be linked to get all the production order numbers for each sales order line item.

    I think it depends on your configuration. But check fields KDAUF and KDPOS in table AUFK.  or in table AFPO.
    Regards,
    Rich HEilman

  • I have a problem regarding sales order line item with confimed quanity

    Hi Experts,
    I have a problem regarding sales order line item with confimed quanity with '0'  with delivery block but confirming the sales order quantity once the order is released from credit check.
    The situation arises as per the below scenarios.
    Scenario - 1 -  When the sales order has two line item - one line item with confirmed qunaity in the schedule line and for the 2nd line item there is no available stock for the Material xxxxxx.
    Initially the sales order is created for the line item 2 with confirmed quantity = 0, and having the delivery block = 01 for the Material xxxxxx  and the order is set with credit check.  Once the order is relased from the credit check.  The quanity for the item 2 where the confirmed quantity will be = 0 ( Where it is not changing the confirmed quantity)
    Scenario -2-  Updating the order qunaity for the line item 2 as (9Pcs) it will goes to credit check and save the order.
    Maintain the stock for the line item 2 ( 5 Pcs).
    Once the order is released from the credit check.  Then  for the line item 2 the confirm quanity will be seting to 5 Pcs with Delivery blcok 01.
    This should not happen, When the credit check is released even though if it has stock based on the delivery blockl it should set the confirmed quanity to Zero.
    Can you please help me how to solve this issue.
    Looking forward for your reply.
    Thanks and Regards,

    Hi,
    I agree with your point.  In the sales order When the complete delivery check box is enabled where the confimed qty is set to zero, it is fine but when we save the orderr it goes to credit check.  Once we release the order using VKM3 where in the sales order the confimed quantity is setting to 5,  But it should set to Zero quantity.  Quatity should not be get confirmed it should be Zero Quantity. 
    Further in SPRO - customizing in the deliveries blocking reasons - It has a tick mark in the confirmation blcok.  But we dont want to remove the - Confirmation Block tick mark
    Please any one can help me if you have any solution to solve this problem.
    Thanks and Regards.

  • Change the Profit Center in Sales Order line item's Account assignment tab

    Hi Gurus,
    I need to change the Profit Center at Sales order Line item in Account Assignment Tab. Currently  The Profit center is coming from Material Master for the Line Item's Material as default but I have to change / overwrite  that.
    Can any body provide me how can i achive that means
    Any User exits, substitution or any thing ?
    I tried MV45AFZZ but i am not able to find out the right place where I can change COBL-PRCTR.
    Sony

    Hi
    There is perform which moves the values to VBAP field.
    This PRCTR field is stored in VBAP (i.e., SO line item table)
    USEREXIT_MOVE_FIELD_TO_VBAP
    Hope it works.
    VVR

  • Restrict deletion of sales order line items

    Hi,
    I need to restrict deleting of sales order line item, I think we can use the user exit, MV45AFZB, USEREXIT_CHECK_XVBAP_FOR_DELE.
    But when i set the flag to 'X', even though it does not delete at tht instance when the sales order save is clicked again the line item gets deleted.
    ANy idea , to prevent that?
    Thanks
    Keshi

    Hi Keshi,
    That is the correct exit, we are using the same without any problem. Just set US_EXIT  = CHARX.
    Regards,
    John.

Maybe you are looking for