No count-in, cursor moving when trying to record

When I record from 1 1 1 1, I get the count-in I've setup (2 bars). However, if I try recording from, for example, 4 2 4 17, it'll move the cursor back to 2 1 1 1 and start recording there without a count-in. Does anyone have any ideas why this is happening?

Do you have cycle on? Is there a green bar above the cursor in the arrange window?

Similar Messages

  • Runtime Error 217 when trying to Record

    I am using Captivate 4 on Windows XP. When I hit the Record button in Cap 4, a microphone icon displays and counts down 3-2-1, then runtime error 217 displays. Cap 4 then crashes.
    I am not recording audio for this project. I am recording FMR and in Edit > Preferences > Full Motion Recording  I have the Working Folder set to C:\Test.
    Not sure why Cap 4 is doing this.
    Can anyone make any suggestions to help me?
    Thank you.
    Laraine

    I deleted everything in the folder then restarted Captivate 4, but still
    experiencing the same problem when trying to record.
    *Laraine Hofmann
    Sr. Instructional Designer
    804-444-7365 (T)
    501 South 5th Street
    Richmond, VA 23219
    mwv.com
    <http://www.mwv.com/

  • I keep getting an error message saying, "cannot record" when trying to record over a slide in my presentation. No idea why. Any suggestions? Thanks

    I keep getting an error message saying, "cannot record" when trying to record over a slide in my presentation. No idea why. Any suggestions?
    Thanks

    email ituens at expresslane.apple.com and they will help you for nothing

  • When trying to record result in co60 a pop up appear

    Hi,
    please help me with my problem a when trying to record a result in Co60 a pop up inspectin point appear asking for what identification . how can i remove the pop up and why there is a pop up?
    please help me solve my problem.
    Your help is highly appreciated.
    thanks.thanks

    Sounds like you accidently de-selected "Software Monitoring"
    and/or
    If you don't know what a function does... in this case, "Low Latency Mode" don't enable it. I suggest consulting the manual and read up on Low Latency Mode... it could even be causing the problem you describe depending on what plugins are being used.

  • Nasty feedback when trying to record using the internal mic

    I get nasty feedback when trying to record using the internal mic on my macbook. I'm running Maverick. Why is this happening?

    Note: there may be other issues involved, but without further details I can only suggest that using headphones is the best way to accurately hear what you're recording, adjust gain levels, and avoid feedback. So this should be the first thing to try as you troubleshoot.

  • Invalid cursor state when trying to insert record

    Hi everyone!
    I'm using JDBC-ODBC bridge to connect to a mySql database, which works fine. Then I try to insert new records, but this only works for the first record in the table.
    When there is already a record in the table, I always get "[Microsoft][ODBC Driver Manager] Invalid cursor state" when calling the updateRow()-method of the result set.
    Here is my code:            // open db connection
                Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
                Connection conn = DriverManager.getConnection("jdbc:odbc:TTManager", "xxxx", "xxxx");
                // Prepare SQL statement
                java.sql.Statement stmt = conn.createStatement(ResultSet.TYPE_SCROLL_INSENSITIVE, ResultSet.CONCUR_UPDATABLE);
                ResultSet result = stmt.executeQuery("SELECT * FROM Player");
                result.moveToInsertRow();Then all fields are filled in this manner:            result.updateString("Name", name);And finally the insertRow should be written to the db:            result.insertRow();But at this point it gives the mentioned error, including these messages:         at sun.jdbc.odbc.JdbcOdbcResultSet.setPos(JdbcOdbcResultSet.java:5272)
            at sun.jdbc.odbc.JdbcOdbcResultSet.insertRow(JdbcOdbcResultSet.java:4132)Since I'm very unexperienced with Java, I guess (or hope^^) it's just some stupid beginner's mistake.
    Oh, almost forgot to mention: The new record's data doesn't violate any unique-constraints on the table, all fields are explicitely filled and all variable's data types are matching their according field types!
    Any help would be appreciated!
    reinski

    Ok, I needed to help myself and this is what I found out:
    If the table already contains records, it is not enough to doresult.moveToInsertRow();but I must beresult.last();
    result.moveToInsertRow();I didn't find any explanation and even the code examples from the Sun tutorial don't mention this, so I guess it's a bug occurring in my poor IT environment: DB server running mySQL 5.0.0-alpha on a P1-233-MMX w/ 64MB under WinNT4 (hey don't laugh!!^^).
    Maybe this information is of use to someone having similar problems...
    Greetings!
    reinski

  • ?????? In the Transport Bar When Trying To Record.

    Anyone know why question marks would show up when you push record? I'm there. I'm trying to bounce down my mix within Logic. I don't think think that the routing has anything to do with it but I'm sending my mix out stereo to analog channels and coming back in analog after by outboard gear. The problem is limited to this session, I've cracked open other logic sessions and they work fine.
    -p

    Have a look at your login crenditals in the Connection Pool.
    Regards
    John
    http://obiee101.blogspot.com/

  • Simplescreenrecorder - error when trying to record to gif

    I'm trying to record an area of my screen to gif.
    Here is the error I get when I press "Start recording":
    [PageRecord::StartOutput] Starting output ...
    [Muxer::Init] Using format gif (GIF Animation).
    [BaseEncoder::CreateCodec] Using codec libx264 (libx264 H.264 / AVC / MPEG-4 AVC / MPEG-4 part 10).
    [Muxer::Start] Error: Can't write header!
    [BaseEncoder::EncoderThread] Encoder thread started.
    [BaseEncoder::Stop] Stopping encoder thread ...
    [BaseEncoder::EncoderThread] Encoder thread stopped.
    [PageRecord::StartOutput] Error: Something went wrong during initialization.
    Container: other...
    Container name: gif
    Codec: H.264 (I tried all codecs with default values).
    I did try x11grab, but I find it inconvenient to have to write down the mouse coordinates: I am unlikely to know exactly which values I want.

    Hi H.Barker,
    Zou is correct, LabVIEW supports all GIF bit depth images 24bit and below.
    Thank you for forwarding the GIF images, I also experienced the same error when trying to import the "logo.gif" image in LabVIEW however I was able to import the image when I opened it in Microsoft Paint and resaved it as a new GIF.
    This suggests there is a corruption in the original GIF file generated on the web, for example a "terminiating block" may be missing at the end of the GIF file. LabVIEW is not forgiving of GIF images that do not meet the GIF specification whereas other Windows editors may be, it seems that opening and resaving the GIF file in Microsoft Paint added the missing characters thus allowing for the file to be imported into LabVIEW.
    I have attached the working GIF image to this post.
    Hopefully this assists with your application H.Barker.
    Many Thanks
    Jamie S.
    Applications Engineer
    National Instruments
    Attachments:
    LOGO GIF (2).gif ‏34 KB

  • Severe static when trying to record electric guitar

    I've been trying to record a clean electric guitar and every recording is just covered in heavy hissing static sound. This didn't happen when I recorded an acoustic guitar through a microphone. I have an electric guitar going into a small amp, with the amp level set on the clean channel at a very low setting, then the headphone/output is running directly into my M-Audio FastTrack USB interface, which is connected to the computer. I have adjusted the "recording level" in garage band so that the signal never gets close to the red in the individual instrument track. The "output" knob on the FastTrack is set relatively low also, about "4" out of 10. When I play back the recorded track, the master level meter never goes into the red either. Yet no matter what volume I record at I'm getting this strong crackling/hissing as if it was extremely overdriven.
    Related question: When I play on the electric guitar, is it supposed to show an indication in the LCD box, as it does when I'm playing on my midi controller? It doesn't have the little indicator light showing signal, nor does the master level indicator, when I'm recording. Only the individual track level indicator shows the signal coming in. Maybe this is normal...
    Any help is greatly appreciated.

    OK, well I solved my own problem through trial and error. Rant: I switched to GB from ProTools on the theory that GB was supposed to "just work" and I want to be a musician, not an audio engineer. Here is how I fixed the static: one of my garage band books told me I could set the Garage Band audio preferences to "System" default, and then set my computer's audio preferences to my audio interface for the ins and outs, because I wanted to play all of computer's audio, whether in garageband or not, through my reference studio monitors. Well doing it this way results in massive static when recording a real instrument, for no apparent reason. So to fix this, you have to set Garageband's own audio in/out settings to your audio interface, NOT to the system settings. This caused the static in my recordings to completely disappear. Go figure.

  • Garageband making loud double clicking sound when trying to record

    Garageband makes a loud double clicking sound when I'm trying to record and then it won't let me play back what I've recorded. Please help. Thank you

    Im having this problem too actually. I have to restart my MacBook Pro to make it go away...
    Latest version of GarageBand. 10.6.1. All updates done.

  • No sound or strange sounds when trying to record guitar

    Hi!
    I'm new to Logic Pro, after having worked with garageband for many years.  I've just been trying to record guitar through my audio interface, with strange results.  I've set my audio in and output source as my M-Audio firewire solo, created an audio track, and selected the guitar sound I want.  At first there was no input, then when I deleted the first track and created a new one, I could hear the guitar through the monitor and it was being input, but it had a horrible distorted and out of tune sound - and that was how it sounded when I recorded it too.  Then I tried it again and it seemed to be working fine for about 5 minutes - it sounded fine through the headphones and the recording was right - but then went back to the strange sounds again - without me changing anything!
    I'm using Logic Pro 9.1.8, on a Macbook Pro running Mac OSX 10.8.3, and have a M-Audio Firewire Solo audio interface.
    I'm very frustrated right now - so I'd be grateful for any help!
    Thanks,
    Stephen

    Hi stephenhis,
    If you are having issues with imput audio in Logic Pro, the first place to start would be with some basic isolation troubleshooting to see if the issue can be localized. That should provide a good basis for further troublshooting should the issue persist.
    Logic Pro 8 and 9: Troubleshooting basics
    http://support.apple.com/kb/HT2375
    Regards,
    - Brenden

  • Need to stop cursor moving when external swf loads???

    Hi, I am using a magnifying glass as part of my portfolio but when I click on another section and this loads an external swf above the main movie, because you can still see the main movie below, you can see the magify glass still moving as you move the cursor above??
    you can see what I mean at :
    www.zoeglazebrook.co.uk
    any ideas how I can stop the magnify glass moving while i am on the external swf above?

    OK, I wasn't following what that code was doing before, but try replacing all the code I gave you before with this (put it all on the timeline, and remove that function from the movie clip):
    var mGInt;
    magnifyingGlass.onPress = function(){
         startGlass();
    function startGlass() {
         magnifyingGlass.startDrag("", true, 215, 120, 1080, 660);
         mGInt = setInterval(updateGlassImage,100);
    function stopGlass(){
         magnifyingGlass.stopDrag();
         clearInterval(mGInt);
    function updateGlassImage(){
         largeobject._x = (original._x-magnifyingGlass._x)*2;
         largeobject._y = (original._y-magnifyingGlass._y)*2;
         updateAfterEvent();
    webBtn.onRelease = function()
         disableBtns();
         stopGlass();
         loadMovieNum("Advertorial/Advertorial.swf", 1);
    function enableBtns():Void
          webBtn.enabled = true;
    function disableBtns():Void
          webBtn.enabled = false;

  • How do I stop my pages from changing (paragraphs breaking, chapters moving) when trying to export?

    I'm fairly new to indesign and am self teaching myself via the internet and books. I'm working on a novel layout and I had it finished and what I thought looked nice. The last step was to export it to a PDF format I thought. Well, when I export it and then view the PDF a few paragraphs are broken with a few lines between the first part and second part. Chapters also lose their position. I would go back into InDesign and check and it would be that was in indesign as well. I've fixed it a dozen times. Double and triple checked the pages before hitting export again. Again, more trouble, but it would be in different places. Am I doing something wrong during the export?

    Did you start this book in an earlier version if InDesign and convert it? If so, the text engine is different in the new version and stories reflow when you touch them in some way. You can force ID to recompose all stories using the Keyboard Shortcut Ctrl + Alt +/ on Windows or Cmd + Opt + / on Mac, then check carefully throughthe whole thing.
    You can also force a recompose by exporting to .idml and opeing that, then saving with a new name. (See Remove minor corruption by exporting)

  • Logic freezes when trying to record 8th instrument.

    Today is the LAST day I have to exchange my new iMac for a better one, and of course today is the first day I've had this problem.
    The first section of my project has 7 tracks playing together, and they do so just fine without any problems.
    When I moved onto the second section, I only needed to record one track with no other tracks playing at the same time. Regardless, the instant I hit the first note, Logic locked up and only played a scratchy electric sound non-stop, while the numbers 1,2,and 3 next to my first three tracks flash with a box.
    I tried freezing all of the other tracks, so it only focuses on the one I am recording, but it didn't work. I tried changing instruments and that didn't work either. I checked my CPU and it never went above 40%.
    Will upgrading to the next highest iMac make a difference? The processor speed is the same, the only difference is there is 4gb ram instead of 2. I will try calling Apple, but I just thought I'd post in the meantime. Thanks in advance for any help you can give.

    Not sure what 'the numbers 1,2,and 3 next to my first three tracks flash with a box' means but it could be something to do with the solution if its the Mute or Solo buttons flashing.
    If you go into the Mixer you might find a track that's been soloed or muted that isn't on the arrange page. That's all I can think of from what you've said.

  • Error message when trying to record video?

    PowerMacG5
    OS 10.5.6
    QT 7.5.5
    iSight camera
    When I try to record a video using QT Pro I get the following error message:
    Operation Could not be completed due to an unknown error.
    (error Domain= NSOSStatusError Domain code= 1852797029
    If I try to use iChat, iSight is working fine. After getting the error message in QTPro then iSight does not work anymore even in iChat....
    I have to unplug iSight then plug it back in to get iChat video working again.
    I deleted QT pref, no luck.
    Any suggestions?
    Thanks
    Fred

    after several hours of searching for and testing of lots of different video capture applications, i have finally found one. There were several that worked. But the one that was the best of the ones i tested was *EvoCam (http://www.evological.com/evocam.html)* I haven't used it for long but from what i have seen so far it works sweet. The one main thing i wanted it to do was create video recordings. that it does. it also has several cool options and effects you can apply to the video.
    hope this helps.
    i still have not been able to get QT to record video with the iSight, or find any explanation from anywhere or anyone as to why. here is a list of a few of the other software apps i tried:
    camtwist - (Really cool effects that you can apply to your cam for chats ect.)
    BTVPro
    capture magic
    dreamn capture
    gawker
    ishowU hd
    periscope
    UseeMe
    webcam tweaker
    Rons video grabber

Maybe you are looking for