No-CRC4 framing option for PRI Configuration on cisco 3527 gateway

Hi,
Cisco 3527 videoconfrencing support only below mentioned framing options:-
CRC-4
Extended CRC4
Double framing.
PRI service provider support only no-CRC4. Is there any option to get to PRI with no-CRC4 framing option teminated on 3527.
Please find attached screenshot of the same.
Regards,
Abhas Jain

Place an ISR router in between 3525 and PRI circuits. Beside teh CRC issues, that will allow you to use PRI for other things beside videoconferencing only.

Similar Messages

Support for IPv6 Router Advertisement Option for DNS Configuration RFC 5006

Hi everyone, do you know that whether Cisco routers support “IPv6 Router Advertisement Option for DNS Configuration RFC 5006” currently, is there any roadmap for this support? Thanks for your help!

No, this is not currently supported, and the last I heard, there is no roadmap for this until it becomes a standard (as opposed to being experimental).

Promotions at configuration option for a configurable product

Is it possible to apply promotions to a specific configuration options in a Configurable Material?
For example, Material A is a configurable product. It has several configuration options with charges attached at configuration option (i.e. Characteristic value level) through variant conditions. Now if we want to give a promotional discount for a specific configuration option, Is it possible through standard SAP Promotions and Sales Deal functionality?
Base Price of Material A: $1000.00
Confuguration option X : $200.00
Promotion on configuration option X : 10% off of Config Option X charges (i.e. -$20)
Net Price of Material A with Config option X should then be:
$1000 + ($200 - $20) = $1000 + $180 = $1180
If it is possible to handle this kind of promotions in SAP ECC, please suggest the config steps involved to include variant condition type in the Promotions.
Thanks in advance
SCB
Edited by: Sreenivasa Bahudodda on Jan 19, 2009 1:25 AM

Hi,
Have you checked the downloaded knowledge bases in the CRM tables - COMM_CFGKB or COMM_SCEKB?
If you don't find the entries in one of the above tables (particularly in COMM_CFGKB), then you have an issue regarding the download of SCE.
Please let me know you answer, so that I will try to help you to solve the download issue
<b>
Do not forget to reward if it helps,</b>
Regards,
Paul Kondaveeti

Options for Customer Configurable values

Hi,
I need some property that needs to be set by the customer and this value is used by BPEL during its process. It needs to be something like a profile value kind of thing. One of the option I could get is by using Business Rules. But I dont want to use the business rule for this purpose as this is not a business rule but a preferences setting kind of thing. Please let me know if there are any options for this. I am using SOA 11g.
Thanks in advance

Hi James,
On the second option you were giving, where does the service read the preference from . If its from DB then, it does not serve the purpose as it cannot be updated by the customer using the console. It needs to be like a profile setting we used to have in EBS.
Thanks,
Ajay

Recently updated MBP and Apple Configurator. Since updating the Update iOS option for Apple Configurator forces me to update the iOS. Thoughts?

I have a MacBook Pro (Retina, 15-inch, Late 2013)
Processor: 2.3 Ghz Intel Core i7
Memory: 8 GB 1600 MHz DDR3
Graphics: Intel Iris Pro 1536 MB
OS: OS X Yosemite Version 10.10.1
Apple Configurator
Version 1.7.1 (550)
Since upgrading both the OS and Apple Configurator I can no longer select the option to not update the iOS when I prepare a device. It is currently selected as When update is available. Also the option appears to be grayed out. Any thoughts?

Google maps is now available in the app store and the carrier update that your refering to was for cell data usage while on wifi. It is perfectly fine to do the update. No issues that i had from that update.

Options for printer configurations have disappeared from Print Center

Hello,
Checked through the past messages but couldn't find anything appropriate to fix the problem. I'm totally baffled by this this one, but you guys have never let me down before, so here goes.
I'm using 10.3.9 and a HP LaserJet 2200dn connected via an Airport Extreme Base. I've hooked up the printer via a USB cable to the Base. I have connectivity to my Powerbook G4. I'm trying to print via MS Word (Office 2004 ed).
I had deleted some stuff off my harddrive -- because I thought I had a virus of some sort. I must've deleted some essential files, because I started having problems. I was also having problems printing (even though I had, at that time, my HP LaserJet option available to me in Print Center).
Thus, after, I reinstalled 10.3.9 (after transfering essential files and erasing the HD).
I thought this would do the trick. But I still have no option to select the HP Printer. "Rendezvous" is in the "menu bar" though I've tried every other option. I've also downloaded the appropriate driver from the HP site and installed it, but no luck.
Configuring the printer used to be so easy with the Mac, and now I'm at a loss to know what's gone wrong.
I hope I've described the problem correctly. Anyone out there with some insight would receive my gratitude and appreciation!
Thanks.

Ali,
I'm not sure what driver you are referring to in your last message.
The driver that I downloaded was HPLaserJetv5_52.dmg and I clicked it on and installed it.
I took the Mac into the Genius Bar at the Apple store. They tested everything except USB ports, which I had tested myself. They said I could bring the printer in too, if I wanted.
So far, they think it's not the machine itself because they were able to configure printers over their airport network with my Powerbook. They were able to print from my machine onto their printers.
So -- they suggested I try again. They also suggested I try using Ethernet -- bypassing the USB stuff -- just to check.
A guy who I know also said to create a text file and send unix commands directly to printer to print something. Just to rule out MacOS X software.
I don't know if the above will help anyone else.
I'm messing around with stuff here -- but unfortunately, can't afford to spend much more time on it. (But neither can I afford to "spend" a lot of money having a consultant fix it either!).
I wonder if my HP printer needs to be "reset" or something like.
WIll check it out.
It was so easy when I first set this up: it was simply plug and play. Now it's not.
Thanks again to all in this thread who've tried to help.

Configure 2 Cisco VG200 gateways to talk to each other

Hi all,
I was just wondering, is it possible to configure two VG200 gateways talk to one another? For example, the network topology I am thinking about is the following:
IP Phone ------> VG200 ----> WAN ---> VG200 ----> IP Phone
Of course, there will be routers/switches/CCM. The above illustrates the voice traffic flow.
Billy

Of course, it is possible.
You don't even need a CCM for that.

Hello, anyone here who can provide me a download link for adobe configurator 2 or 3? still working on cs5.

I'm looking for a download option for adobe configurator. the last version (version 4) only works with cc and cs6, but not with cs5 anymore. I would be really lucky, if someone still has a earlier version (2 or 3) and could upload it for me.
thank you very much

If you do a seatch here you would find links like this:
http://labsdownload.adobe.com/pub/labs/configurator/configurator3-1-1_p1_win_092512.zip
http://labsdownload.adobe.com/pub/labs/configurator/configurator3-1-1_p1_mac_092512.dmg
Configurator 2 download link?

Is there a way to configure NTFS file system on an NSS 324 SmartStorage unit. So far I can setup ext 3 or ext 4 but no option for NTFS

Is there a way to configure NTFS file system on an NSS 324 SmartStorage unit. So far I can setup ext 3 or ext 4 but no option for NTFS. This unit should be joining a Windows Server 2008 R2 network and needs to be shared with all users. This unit will replace a File server running Win 2003 SP2.
Message was edited by: Hermann Koster
Thank you very much for your reply. The idea is to decommission the Windows file server which is running Windows Server 2003 SP2 operating system but is not running as a DC but just a member server. All this server is doing is providing file server services so my idea is to replace it with the NSS 324 box. My only concern is that when my NSS joins the domain all my users would be able to see and access network shares transparently, the same way they saw the former W2003 file server. After I transferred the data from File server I will use the same for NSS that was used for file server as well as same IP address and folders path as before.
Any suggestions or advice?
Once again thank you very much for your reply.
Cheers,

The internal HDDs must be formatted in either EXT3 or EXT4 file system because NSS uses Linux OS. This is mainly because the RAM designed to fit with the customized Linux OS's size.
You can connect to an external HDD via a USB or eSATA port. The external HDD's file system can be NTFS, FAT32, AFT or EXT3/4 to be recognized for read/write. You can connect a 2TB USB/eSATA drive connec to the NSS via USB port to format your HDD for NTFS, AFT, FAT32, or EXT3/4 partition.
You can join the NSS to a Windows domainr so all domain users to access NSS. You cannot replace the NSS for the Windows 2003 SP2 server. They are two different products and do different jobs. Windows server is features sets server while the NSS is the files/data server.
Hope that helps!!

Configure DHCP Server options for Internet Sharing?

Good morning, all.
I have a Sprint (Sierra 595U) AirCard internet connection, which I'm sharing over my AirPort (using OS X's built-in Internet Sharing) to several Windows clients in my office. I see that when Sharing is enabled, en1 takes on the address 10.0.2.1 by default, as well as the role of default gateway/router and DHCP server for the Windows clients.
My question is: Can I configure the IP addresses and DHCP options for Internet Sharing to another address/mask scheme?
Just like I changed my home wireless network away from the default 192.168.1.0/24 for security reasons, I'd like to do the same here.
Thanks and Regards,
BrooklynWalker

Some paranoia is good.
Yes, of course security paranoia can be cultured. like yogurt
I googled.
This might help:
http://www.aleph0.com/computing/macosx/dhcp-setup/
but from what I just read, changing away from the default net & mask might be putzy.Some other discussions for you:
http://www.macosxhints.com/article.php?story=20050331194834746
or you might see something here that helps.
Sorry not to be more specific. Hard to tell if you already googled for yourself.
I'll let someone smarter than I am take a look for you, here.

Configuring PPP options for only one VPN connection

How do you configure PPP options for only one VPN connection that is using L2TP over IPSec? The built-in VPN client in 10.4.9 is failing authentication because it won't talk MSCHAP-V2 (this is the only authentication protocol I can use) with the server. I am able to establish a connection if I add the following to /etc/ppp/options:
refuse-eap
refuse-pap
refuse-chap
refuse-mschap
require-mschap-v2
However, these options will affect all PPP connections. The preference file that contains the network configurations (/Library/Preferences/SystemConfiguration/preferences.plist) also contains PPP options for each specific network service. After some searching around, I found that there are several keys that seem promising (MSCHAP2, etc.). But these keys take a string value and I have no clue what they should be. These keys are defined in SCSchemaDefinitions.h file.
Any ideas?
Mac OS X (10.4.9)

Hi Brian,
I just tried to check all of ADDT´s "includes" files for any internal references (read: "require" or "require_once" statements) to the file "tNG_config.inc.php". So far I can only see this file referenced in the file "tNG.inc.php" (within the "$KT_tNG_uploadFileList1" array).
So what could this mean ? Maybe you´ll have to make copies of the the original "tNG.inc.php" as well and save them as, say, "tNG.inc_ital.php" file plus make sure that these copies internally point to a different "tNG_config_ital.inc.php" file -- because it´s always the first mentioned file which gets referenced from e.g. an ADDT login page (see the "Load the tNG classes" - part)
I want to use ADDT’s User Registration Wizard and I have looked at all the neat stuff in the Control Panel/Login Settings
The Control Panel will always update the main "tNG_config.inc.php" file, so any further modifications will have to become manually applied to the custom files you´re creating.
Cheers,
Günter

[svn:bz-trunk] 9713: Bug: BLZ-427 - Add configuration option for BeanProxy#includeReadOnly property.

Revision: 9713
Author:   [email protected]
Date:     2009-08-27 14:09:43 -0700 (Thu, 27 Aug 2009)
Log Message:
Bug: BLZ-427 - Add configuration option for BeanProxy#includeReadOnly property.
QA: Yes
Doc: Yes - We have a new include-read-only property, see resources/config/services-config.xml
Ticket Links:
    http://bugs.adobe.com/jira/browse/BLZ-427
Modified Paths:
    blazeds/trunk/modules/core/src/flex/messaging/endpoints/AbstractEndpoint.java
    blazeds/trunk/modules/core/src/flex/messaging/io/AbstractProxy.java
    blazeds/trunk/modules/core/src/flex/messaging/io/SerializationContext.java
    blazeds/trunk/resources/config/services-config.xml

Custom Configuration options for new U430

I would like to buy U430 laptop, but I don't see how I can configure options like CPU, Memory Size etc...
I just have an option to select a model and no way to customize it. Here is the page I go to:
http://shop.lenovo.com/us/en/laptops/ideapad/u-series/u430-touch
I tried several other types like YOGA, but don't see any configuration options also.
Am I missing something, or you can't build Custom Lenovo Laptop any more?

Hello mag20, welcome to this forum.
     Yes, you can build a Custom Lenovo Laptop. However, you need to call, or chat on line, with the sales team. The website has some customization options for their ThinkPads, which you can do on line. For example, see the T440s page:
http://shop.lenovo.com/us/en/laptops/thinkpad/t-series/t440s/
      If you want a U430 Touch, it would be better to know what possible options are available in that system, before you call, or chat. The best way to know this, is to read the part list, in the Hardware Maintenance Manual (HMM). Here is the HMM for the U430 Touch:
http://download.lenovo.com/consumer/mobiles_pub/lenovo_u330p_u330%20touch_u430p_u430%20touch_hmm.pdf
     Page down to Table 5, Parts List - Overall, on page 69. Part No. 4 is the RAM, 6 is the processor, 7 is the hard drive, 10 is the SSD, 12 is the WLAN.
     Be aware, that not all options, are congruent with some of the other options, that you may want. i.e. I don't think you can have both a hard drive, and a 256 GB SSD, but I don't know. You probably can get the drive, and a 24GB NGFF SSD, as that goes in a different slot. That's why you need to chat/talk with a sales rep.
      Keep in mind that if you custom order a Laptop, it may be more expensive than "standard on line model", but the reps have a certain amount of latitude, and you can still get a good "deal" .
     You may need to wait a little longer for it to be built, and shipped. The upside of this process is, you get the laptop you really want, with the configuration you need!
     Happy shopping!
Cheers
DragonRider
I'm DO'ing IT
Lenovo Y470 085525U 2nd generation Intel® Core™ i7-2630QM processor ( 2.00GHz 1333MHz 6MB )
IdeaCentre A520 Intel® Core™ i5-3230M processor ( 2.60GHz 2600MHz 3MB )
YOGA Tablet 2 Pro-1380F
X1 Carbon 2nd Gen (20A8) ThinkPad + T420

Bought an Airport Express in Slovenia, planning to use it in Moscow. When configuring, Moscow is not an option for location. I ticked Ljubljana for set up; got green light, but network not working. Is choice of city the problem?

While on vacation, I bought an Airport Express in Slovenia, planning to use it in my Moscow apartment. I plugged everything in, seem to have followed the directions properly for configuration - except for one thing. Moscow does not come up as an option for location. So I tried ticking Ljubljana (Slovenia) as location (since that's where I bought it). The cycle seemed to have worked, I got a green light on the Airport Express, but the network didn't work. I tried going in to change the location, and chose something called Universal, but the network still didn't work.
Is the fact that Moscow doesn't come up among the options going to be a problem? Or is it possible I am doing something else wrong?
Anyone have any insights?

AirPort Utility for the iPhone, iPad, etc does not support the older version of the AirPort Express that you have.
Try installing AirPort Utility on the Lenovo laptop to see if you can configure the AirPort Express that way.
If the laptop runs XP SP3 or Vista SP2.....use AirPort Utility 5.5.3 for Windows - Support - Apple
Windows 7....use AirPort Utility 5.6.1 for Windows 7 - Support - Apple
Remember that the SB5101 modem must be fully reset before it will associate correctly with the AirPort Express. That means pressing the reset button on the back of the modem (if present) and powering off the modem for at least 30 minutes, then connecting it to the AirPort.

[svn:bz-trunk] 13622: Bug: BLZ-427 - Add configuration option for BeanProxy#includeReadOnly property.

Revision: 13622
Revision: 13622
Author:   [email protected]
Date:     2010-01-19 02:38:36 -0800 (Tue, 19 Jan 2010)
Log Message:
Bug: BLZ-427 - Add configuration option for BeanProxy#includeReadOnly property.
QA: No
Doc: No
Details: Documented the fact that include-read-only property applies globally.
Ticket Links:
    http://bugs.adobe.com/jira/browse/BLZ-427
Modified Paths:
    blazeds/trunk/resources/config/services-config.xml

No-CRC4 framing option for PRI Configuration on cisco 3527 gateway

Similar Messages

Maybe you are looking for