No custom easing in CS5

In this documentation it says that flash CS5 should support custom easing, just like old good CS3 and earlier versions of flash
however, this feature seems to be missing from CS5. it says:
Click the Edit button next to the Ease slider in the frame Property inspector.
but there is no "edit button" in the panel with easing slider.
screenshot attached:

thanks for the tip!
however, the new motion tweener is very clumsy and unintuitive, i even had problems finding out how to display more frames, not just `current curve position at the current frame`. mix it with the new non-ergonomic cs5 panel layout and it's a complete mess to work with.
in the guide i also noticed that there is an option to use the old stuff, when we create `classic tween` instead of `motion tween`, so i will be using the `classic tween` option, thanks!

Similar Messages

Move motion tween and custom ease property keyframe at the same time???

Hello,
I'm making adjusments to my animation, by "ctl" clicking the motion tween diamond keyframe in the timeline, and moving it. It works great, except I have a custom ease property set up that has keyframes that correspond to the animation. When I move a keyframe, they all update and move except for the custom ease keyframes in the motion editor. Is there a way to do this?? Set it up so that the custom ease keyframes are locked with the other keyframes??
Any help would be greatly appreciated..
Thanks,

Hello,
Thank you for contacting National Instruments.
You should be able to control your RS-232 port and DAQ card independently. If you are doing a continuous buffered analog acquisition, then your board should be acquiring analog data continuously regardless of what commands are being sent out on the RS-232 port.
I imagine that this is a software timing issue. I would recommend that in your code that you configure and start your analog acquisition before you even start the stage's movement. After you have determined that you are acquiring data, you should send commands to stage to begin its movement. After all of the stages movements are complete, you will want to stop and clear your analog input measurement. This will ensure that you will acquire all
of the data for all of the movements of the stage.
Regards,
Bill B.
Applications Engineer
National Instruments

Help a novice! Embedding Custom Font in CS5

Hi!
Can someone help me understand how to embed a font in Dreamweaver CS5?
A quick google search reveals instructions for embedding custom fonts in older versions of Dreamweaver but not recent ones... Is this because its somehow automated in CS5? I'm not really sure what to do! Thanks for any help!

Can someone help me understand how to embed a font in Dreamweaver CS5
You don't embed fonts into Dreamweaver. You embed fonts into your web pages with CSS.
You will need to find a suitable font. Not all commercial fonts can be embedded without violating copyrights. Read the fine print in your license very carefully.
@Font-Face Guide
http://sixrevisions.com/css/font-face-guide/
You will need several different file types to support the various browsers and mobile devices
@font-face font generator
http://www.fontsquirrel.com/fontface/generator
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb

Is this LPC different than the Custom correction in CS5?

Sorry, I'm having trouble discerning if this Lens Profile Creator is different than the Custom lens correction tab I already have in Photoshop CS5?
Also, my intial reason for looking was I'm trying to find a lens correction for the iPhone 4's front-facing camera. I have definitions for the 3G, 3GS, and the 4 back-facing - but not the front.
Thank you.

LPC creates profiles for the Auto Correction tab not the Custom Correction tab of the Lens Correction filter.

Transfer Custom Workspaces to CS5.5...

Does anyone know of a way to copy over our custom workspaces from Production Suite CS5 to CS 5.5? Is there a way?

One would think that being part of the same Production Suite, the process would be identical. As it turns out, it is similar but the xml files are instead found in the Users/Userxxx/Library/Preferences/Adobe/After Effects /10.0/ModifiedWorspaces and OriginalUserWorkspaces. Copy the contents of these to the corresponding 10.5 folders.

This is driving me nuts -- Custom easing

Well, I was using flash on someone else's machine, and I
created a custom motion tween ease between two keyframes, and when
I added a new keyframe halfway in between the keyframes it
automatically adjusted the easing on both tweens so that the motion
of the object remained the same.
My home computer does NOT do this automatic adjustment for
me, and it's driving me nuts. I can't figure out how to enable it.
If anyone out there knows what this option is called or how
to turn it on, I would really appreciate it.
Thanks!

>But despite the fact that track 3 is routed OUT to the Master, the Master track does not seem to hear track 3. Thus, I cannot rout the processed track to the master mix for mixdown.
Assuming that I've understood you correctly:
AFAIK, that's quite correct; you can't add a live source to a mixdown. You can determine what you hear by altering the overall monitoring settings (Audition mix, external), but I'm pretty sure that you can't add a 'live' anything to an actual mixdown
process, simply because this is based on file manipulation. So, you have to record it first. And anyway, even if you could do what you want, the timing would be all over the place.

Can`t manage my custom workspaces in CS5 Ai after importing CS4 workspaces

Here is the folder I pasted my workspaces in from CS4
on XP to Ai CS5 on WIN7
then a screenshot of what my CS5 Ai workspace drop down list looks like...
and last a screen shot of the manage workspace dialogue box...
When I choose manage workspaces from that workspace list in Ai, it doesnt allow me to move my custom workspaces to the top of the list where the two topmost workspaces are ?

Thanks for helping Larry,
I`m not sure how to follow what their saying, trashing or resetting prefs resets prefs for Ai cs4 yes?
I didnt explain myself correctly actually
i`m trying to get my CS5 prefs copied from XP to be manageable on CS5 for windows 7.
Originally I copy pasted my workspaces from Ai cs4 on XP to Ai CS5 on XP which worked fine,
then from there to Ai CS5 on Win7 into I believe the correct folder below, presets/workspaces, so it intermingled with the default CS5 workspace settings.
However on win7 they show up in the workspaces menu allright in mixed order, but not in the personal custom sets which are supposed to appear separately at the top of the workspaces drop down menu..
the result being when I choose "manage workspaces" I only get the following..not all my custom workspaces are showing..

TIP: custom arrowheads in CS5

Custom arrowheads can be added to Illustrator.
Edit the file arrowheads.ai according to the instructions in it. It can be found here (or similar on your system)
\Program Files\Adobe\Adobe Illustrator CS5\Support Files\Required\Resources\en_GB
The following was made using 4 strokes, 3 of which have a my new custom arrowhead:
Enjoy!

I love the new arrowheads interface, however:
When I create an arrowhead, then save and close the file, the next time I open it the arrowhead is now a separate (but grouped) object, and is a filled shape with no stroke. This is really annoying!

How to Upgrade cs2 custom plugin on cs5

Hi all ,
It'is possible upgrade mac cs2 plugin custom on cs5?
If yes how?
Thanks

Thanks for the answer.
I have source code and i did it.
But it'is possilbe upgrade directly plugin from cs2 to cs5 or i have to migrate cs2 to cs3 and cs3 to cs4, and cs4 to cs5?
Thanks

Customer Service on CS5 Master Suites

I spent 6hrs on the phone with Tech Support & Customer Service.
I purchased the CS5 Creative Suite Master Collection upgrade. I purchased it from a Adobe Authorized large company that carries PC and Mac sofware. The issue I have a 32 bit IMAC and the Adobe Premier and After Effects would not install on the system. Everything else updated fine to the CS5. Tech support had me do everything from setting up a new user reinstalling running the disk utility and on numerous phone calls to his senior tech rep.
Finally he said download the CS5 trial on these two programs and then just type in my serial number and the program will install fine. That didn't work and back to tech support more time wasted. The tech support said to call Customer Service and they will send the CS4 Adobe Premier and After Effects because it should of been shipped inside the box. Then Customer Service said it should of been shipped in the box another Customer Service rep no its not included, Tech Support yes it is included and said talk with Customer Service and they will give you a link to download the software. The last Customer Service Rep said it should of been shipped but since I did not purchase the software directly from the Abobe store website that they could not help me and they can not locate my serial number and can not help me. The Customer Service Rep also quoted that resellers like MACMA** and the other companies are not reliable sellers of abobe products.
I guess since you buy a product not from the adobe store and save yourself a few dollars that Adobe can't help.
Maybe Adobe should send out info so Tech Support, Customer Service all has the same info. You spend around 1,300 and this is the Customer Service Adobe gives you. Great work Adobe you really know how to treat customers!
Here is the email I got back from Adobe this morning
Thank you for contacting Adobe Customer Service
We have received your concern for the Serial numbers of After Effects
and Premiere Pro for the 32 bit installation as well as the discs that
is not included in your package. We understand that you purchased this
from a reselelr thus it is best to ask for the replacements from them
because the discs as well as the serial numbers should come with your
package and should not be missing.
Kindly contact the reseller for the replacement of your package. Hope we
are able to address your concern.
Thank you,
Karl
Adobe Customer Service

Yes I understand the Adobe Premier and After effects in CS5 run on 64 bit only - but the 4 adobe Techs and 3 out of the 6 customer service reps said that a CD for CS4 for Adobe Premier and After effects comes with the CS5 suite. They said that their are so many adobe customers with 32 bit so that is why it should of been included in the CS5 master suite. Some of them are telling me that that their should of been a separate DVD

How can I find my custom panel in CS5 using java script

-I made an empty panel using Adobe Configurator 2 and then exported it to /Panels folder.
-My custom panel is now in photoshop and works.
-I added a simple code to onPanelInit():
function onPanelInit()
    var myWindow = new Window ("dialog");
    var myMessage = myWindow.add ("statictext");
    myMessage.text = "Hello, world!";
    myWindow.show ( );
so far so good.
Now instead of creating a new window like I did above, I want to use the new custom panel and add a text to it.
The problem is, how do I do that in java? Where can I find the panel that I should assign the text to?
I know that you can add the text in Configurator, or you can edit the .xml file and add the button there, but my
plan is to create a panel where i can add and remove buttons dynamically and that's why I have to do that in java.
Any help would be appreciated!
Cheers,
Petri J

Use Runtime.exec() to run a OS specific command which retrieves OS specific info.
Or use JNI to access a OS specific API which returns the info you want.

How would I create a layer ABOVE a custom cursor? [CS5 Pro]

...so the custom cursor would disappear behind the layer when moved across it.
Currently if the layer is simply put at the top of the layer list [above the mouse cursor layer] when published the mouse cursor supersedes it and appears above all layers... not behind any
Many many thanks for your help in advance oh Holy Whizzkids

First, try removing that first line and see if it helps.
Second, if it doesn't help, after that line do the same for whatever object you have in the layer you want to sit above the cursor... it'll need to be objects that you can target with code.
What addChild() does is it takes the object being targeted and places at the top of the display list. So that first line is essentially uprooting whytehand from the timeline and placing it above all other content planted in the timeline. So either you don't use it, or you also use it to place the other content above the cursor.

Custom Brushes CS4/CS5

I have been trying to create a brush that looks like a REAL marker. Looking at my image you can see the issue I am having. Top image is a real marker scan. Middle/left image is a calligraphic brush in illustrator. Bottom image is what I used to create my art brush. Middle/Right image is what I got after applying the art brush to middle/left path in Illustrator.
I am looking for something that behaves like a calligraphic brush but has the texture of an art brush. Is this possible in Illustrator?
Oh and it’s not the non-zero winding fill rule.

function(){return A.apply(null,[this].concat($A(arguments)))}
I am looking for something that behaves like a calligraphic brush but has the texture of an art brush. Is this possible in Illustrator?
Neither ArtBrushes nor Pattern Brushes are going to give you the direction-dependent scaling (relative to the spine path) of a CalligraphicBrush.
Pattern brush would probably be your best bet. That way you can set the interior as well as both end caps.
In CS5, you can set an ArtBrush to scale only the region between two guides specified in the Art Brush Options dialog, thereby not scaling the "ends." But this still does not give you the "keep-aligned-to-page" behavior of a Calligraphic Brush.
JRMN,
You are also going to encounter the mitering problem inherent in ArtBrushes. ArtBrushes don't make sharp direction changes very elegantly, as you can see in your middle-right image. Even if you do concoct an ArtBrush that you find satisfactory, it's usually best to break the spine path at sharp corners.
Why kick against the thorns? This kind of thing is still best done in a raster program. Corel Painter (Originally Fractal Design Painter) would be a good choice. If you insist on its being done as vector paths, you might take a look at Microsoft Expression Design (originally Fractal Design Expression). I don't recall whether it can make its "Expression Strokes" stay oriented to the page as they are stretched along the spine path; it's been a while since I messed with it.
JET

Cached Custom Captions in CS5

Hello everyone,
It seems that Captivate 5 is caching every single custom caption and button I create. Is there any other way to update them other than renaming the original file? The type scrolldowns are ridiculously populated in my current project... :S
Cheers!

Hi CaptKimbo and welcome to our community
You are correct in your thinking that the captions will only
be available to you. Basically, I believe you have two options
here.
1. Methodically copy them to all other developers'
workstations so they are available.
2. Create a Captivate template, then share the template by
copying it to all other developers' workstations. I believe that
the captions are cached in the project file of the template and
therefore available for subsequent use when building projects from
the template.
Cheers... Rick

Customizing the Dreamweaver CS5 workspace

This question was posted in response to the following article: http://help.adobe.com/en_US/dreamweaver/cs/using/WScbb6b82af5544594822510a94ae8d65-7f82a.h tml

Have you followed these instructions exactly as they are:
<http://help.adobe.com/en_US/dreamweaver/cs/using/WScbb6b82af5544594822510a94ae8d65-7f82a.h tml#WScbb6b82af5544594822510a94ae8d65-7f70a>
The look and feel of your work in design view is derived from the styles you have used. Perhaps, you need to look at the font styles of your document. The instructions will create default fonts and size but as you may know, these can be over-ridden by the user using CSS.
Perhaps you should explicitly enter the font family and font size (if these are not in your styles) to have any visual impact in your design window. Aso make sure the fonts you use are already installed on your system, otherwise it would be a futile exercise.
Good luck.

No custom easing in CS5

Similar Messages

Maybe you are looking for