No data appear on "measure data view "
I now do some execises using the OLAP Analytic Workspace Manager and Worksheet.
I follow the examples in the online documents 《Oracle® OLAP Application Developer's Guide 10g Release 2 (10.2)》
At the end of all steps, using the measure data view to view the measure's data ,but I cann't see the sheet with data.
however ,I can see all dimension's data in the view the dimension through right click the dimension.
the example in the online documents have analyze data.
I have put the question in Chinese on the following web site.
http://www.itpub.net/showthread.php?s=&postid=8518644#post8518644
but no one answer me .
We can see the picture on the above web site , no data in my test sheet .but the example in online docments have data.
Similar Messages
-
Hi all,
I am using Oracle 10G AWM for reporting purpose. I have created all required dimensions, measures. But when i view the data after maintaining it, it won't show any data but a blank Data Viewer. When I do view data for the respective dimensions, it shows me data as meant to. Could you please suggest what could be the reason for this?
I am on 10gR2, AWM 10.2.0.2.0A.
Thanks,
gtcolHi,
Have you checked the log for the build and verified that all your rows have been loaded?
If you maintain the cube in the AWM session this log should appear at the end of maintenance job. If you submit it to the oracle queue you should check out the xml_load_log table in the olapsys schema for the same log.
It might be that all your fact rows are rejected due to the fact that it can't find a reference to one or more dimensions.
Ragnar -
Live View CS4 vs Live Data View CS3
In DW CS3 I was able to edit php pages in Design View with
Live Data View turned on. Without it the page did not display
properly. This made life easy adding content to clients web pages
(the main stay of maintaining web sites).
With DW CS4 this functionality appears to have been removed
or perhaps I just cannot work out how to get it.
Adding lots of content in code view is a pain - can anyone
tell me if and why this has changed and has DW become a tool for
fanciful coding at the cost of being the workhorse it used to
be?aenh agn zfnst wrote:
> In DW CS3 I was able to edit php pages in Design View
with Live Data View
> turned on. Without it the page did not display properly.
This made life easy
> adding content to clients web pages (the main stay of
maintaining web sites).
>
> With DW CS4 this functionality appears to have been
removed or perhaps I just
> cannot work out how to get it.
To access Live Data view in CS4, select View > Live Data
or use the
keyboard shortcut, Ctrl+Shift+R/Shift+Cmd+R.
David Powers, Adobe Community Expert
Author, "The Essential Guide to Dreamweaver CS3" (friends of
ED)
Author, "PHP Solutions" (friends of ED)
http://foundationphp.com/ -
Label Data View in Material Master
Dear Team,
Despite of performing all below standerd steps, i am not able to view Label Data view in Material Master.
pls guide
steps performed.
1. Check whether the screen sequence SP exists in Customizing for the Material Master under Define Structure of Data Screens for Each Screen Sequence.
2. Check whether screen 92 has been assigned to screen sequence SP and has the screen type 1 (main screen).
3. Check under Subscreens whether the subscreens were assigned to screen 92 of the screen sequence SP.
4. In the Assign Screen Sequences to User/ Material Type/Transaction/Industry Sector IMG activity, set up the users who are allowed to edit the screen sequence and when it appears.
also I have SAP_ALL Authorization.
Regards,
Amol JoshiHello Amol,
For IMG activity: Define Structure of Data Screens for Each Screen Sequence, for screen sequence 21, with logical screen 92, in subscreen, please see below settings:
Program: SAPLMGD1 , screen no. is 1002
Program: SAPLCBGL_LD00 , screen no. is 8020
Program: SAPLCBGL_LD01, screen no. is 1010
Regards,
Niraj -
I am trying to change the view in CAT2 worklist and data entry area from days (like Mon, Tue, Wed etc) to date view (06/03, 06/04, 06/05 etc) in the columns.
Can anyone please help me on this?Hi,
Go to
SPRO -> IMG -> Cross-Application Components -> Time sheet -> Cats Regular -> Set Up Data Entry Profile
Select the profile and click on glass.
Then in general settings check Display Weekdays checkbox
It determines that the system displays the days in the time sheet worklist and data entry section as weekdays (MO, TU, WE, for example). In the data entry section, the date is displayed in addition to the weekday.
If you do not select this option, the day's date appears in the format 01.01 or 01/01. This format is recommended if you use this profile to enter data daily or monthly.
Hope this will help
Regards
guds -
Long time for loading Planning books/data views
Hi
Could someone throw some pointers/solutions for extremely horrible time taken for a planning view (data view) to load and populate for certains selection profiles that already have large number of trasactional records. In my case it is specifically the run time dumps thrown for a popular combination (large number of transactions).
Urgent suggestions/solutions required. Pls. call 9923170825. India, if you are lazy enough to type it out. or just type in some key words, tcodes etc.
ThanksI hope you dont have too many macros hogging the memory in interactive book. The other thing is to be on the latest LC build. Also try to have default unit of measures (keep the dataview settings for UoM blank).
Can you confirm if you build the TLB view brand new in 5.0 or did you do some migration of the books ? The first time opening of book takes longer due to some compilation of certain objects. in SM50, try to identify where the process takes longest - whether it is at client end, at the DB procedure of LC or at application level. -
Can I send the zoomed portion of a signal from data view to the next step
I get a zoom window on Data View when I select it. Can I send the zoomed portion to the next step or use it in any way? If I Create VI with this, will the zoomed portion show up in the VI? Will a graph of any kind show up in the VI?
Hi,
Thankyou for posting to the National Instruments Forums.
The feature you are looking for is the Subset and Resample step which may not be the exact thing you are looking for. If indeed this does not fulfil your needs we would love to hear about what features you would like implemented at the Product Suggestion Center.
Hope this helps!
Abhinav T.
Applications Engineering
National Instruments India
LabVIEW Introduction Course - Six Hours
Getting Started with NI-DAQmx
Measurement Fundamentals -
Looking for a manual for the Historical Data Viewer Lookout 6.1
Is there a manual on the Historical Data Viewer (Measurement and Automation Explorer)?
I have never logged any analog data, but want to log (to historical data) the battery voltage at a remote site during a power outage.
I have the object established and have a display showing the real-time battery voltage. I have selected logging and have set the resolution and the deviation.
I am stuck where it comes to the historical data viewer. I believe that I need to set up a trace to view the data, but can not find a manual for the Historical Data Viewer (Measurement and Automation Explorer) so that I can read up on it.
Does anyone have a link to a manual?
Thanks, AlanYou have to configure the Scale parameter of Pot in Lookout. The Historical Data Viewer just reads data from database the show it. It can't scale it.
But I can't find a way to add a reference line to the view. Maybe this can be a new feature.
Ryan Shi
National Instruments -
Planning book: Data views
Hello:
I am defining a planning book and I want to have the same data views (total demands and total receipts) of standard pl.book 9ASNP94, data view SNP94(1), can anyone help me design this.
My planning area is a copy of 9ASNP02.
Thanks in advance.
Monohi Harish:
I have create a planning area which is identical to 9ASNP02 for my pl.book except the unit of measure (EA for ST), and when I try as you said I get a message stating that <b>The planning area of planning books 9ASNP94 and Z_mono (my pl.book) is not identical</b>.
Any other way?
Thank you
Mono -
Hey guys --
I am currently getting an error while running COBRAS Data Viewer, as soon as I run the application and select the database that I exported, I get the following error:
(error): 3709 (The connection cannot be used to perform this operation. It is either closed or invalid in this context.) in procedure listHandlers_Click of From frmMain
I have to click 'OK' couple times to clear the message. Then everytime I select a subscriber, the same error appears.
Any thoughts?
Thanks,
Ohamienhmmm... I'm running build 25 as well and I just opened several 7.1(3) backups I have - no problems. Can you select the "Backup Details" option
and post for me the details it kicks out for your backup? i'm guessing the backup was made with an older version of Export and a column name it's expecting to be there in the backup is not - i'll need to add logic so "if version is less than X" it doesn't attempt to fish that value. -
Reminders won't stay in date view
Ever since upgrading to 10.8.2, Reminders refuses to stay in date view. I can select reminders for a particular day on the calendar, as I could previously, but then it very quickly and spontaneously reverts to list view (which is in itself useless, as you can't sort by date there), even if I'm in the middle of modifying a reminder. I suspect iCloud syncing triggers list view.
Any thoughts?My wife and I have the same problem. Our temporary solution is to Turn Wi-Fi Off (assuming you're on a computer that only connects to the internet over Wi-Fi) while making any significant changes to the Reminders.
It appears as though we're constantly being interupted (date window and name field closing) because it's trying to sync in the middle of typing and my wife types fast and she can't beat it.
This is definantly an Apple problem that needs to be resolved. -
Cannot view cube data in mmeasure data viewer
I am using AWM(10.2.3A) with Oracle EE 10g(10.2.1)with the appr patchset(for enabling OLAP option).
I have created dimensions(time,product),cube (cube1),measures (sales) in a AW,
and mapped it to the source tables as well.
in time dimension,i created levels like,year,quarter,month
in product i created just 1 level,drink.
time i mapped to a year_table table which i created as follows:
create table year_table(yid number,year varchar2(30),qid number,qtr varchar2(30),mid number primary key,month varchar2(30));
product i mapped to product_table which i created as follows:
create table product_table(pid number primary key,product varchar2(30));
sales i mapped to sales_table which i created as follows:
create table sales_table(id number primary key,mid number,pid number,sales number));
for all tables i inserted values.
when i did a maintain on AW,it was successfull.
after maintaining ,when i try to view data on my cube,using Measure Data Viewer,
I was able to see my dimensions,but no data.
also in AWM right hand canvas in mappings when i do a right click on my fact table(for cube mapping) i am not able to see the. data.
Can anybody help me in this regarrd.If you check the OLAPSYS.XML_LOAD_LOG table you will find the log for your build. Did you manage to load any dimension members? The log will tell you how many records were loaded and how many were rejected.
It is strange that you cannot view the source data from your fact table. Try launching AWM using the AWMC.EXE file. This will launch AWM via a command window. All error messages will be recorded in this window. Try viewing the data from your source table and see if any additional error messages are recorded in the log window.
One thought - when you connect to AWM do you provide a full JDBC connect string (host:port:sid) or do you supply a TNSNAME entry? Try using the JDBC connection string and see if that resolves the problem.
Keith Laker
Oracle EMEA Consulting
BI Blog: http://oraclebi.blogspot.com/
DM Blog: http://oracledmt.blogspot.com/
BI on Oracle: http://www.oracle.com/bi/
BI on OTN: http://www.oracle.com/technology/products/bi/
BI Samples: http://www.oracle.com/technology/products/bi/samples/ -
How does one close extra data views?
When opening a particular project, there is a point in the process where a bunch of blank-graph data-view windows appear and disappear. Finally when the project finishes opening, there is only one data-view tab open/visible but if I click on the Menu --> View --> Data View item, I see all the extra "views". How can these extra views be deleted or otherwise eliminated?
Attachments:
Too Many Data Views.jpg 251 KBJames-B wrote:
If you right click on the actual Data View tab, and click "Close", there should be a pop-up window that asks if the tab should be permanently removed from the project. Click "Yes", and that should get rid of it.
If I understand this right (and I may not because I had not seen SignalExpress before yesterday when I got called in to help with it, because I do know LabVIEW) if I do what you suggest, then the primary data-view tab gets blown away (possibly taking all the extras with it). That would seem to remove the ability to view acquired data without first having to manually setup a new data view tab. I don't want to do that. I want to keep the primary data view tab and only dump the extras. Here (attached) is the somewhat tedious process I came up with to eliminate the extra data-view windows. I was hoping that there was a more expeditious way of doing this.
Attachments:
Eliminating extra data view windows.pdf 179 KB -
Enhance Req: Business Components Browser close data viewer
Hi JDev team
Regards the Business Components Browser in JDev 11g TP with an open data viewer. To close the data viewer you need to right click on the tab then select Close.
Can you raise an enhancement request please for a 1 click close facility, such as floating the mouse over the tab, an X button appearing in the right side of the tab, which with 1 click closes the tab.
Thanks,
CM.Filed ER# 6121756
Thanks -
Can not view data in Dimension Data Viewer
Hello Forum,
Has anyone run into this one yet? with OWB10gr2
we have created a dimension called store, it has a simple hiearchy"
store-->category-->primary category-->Busines Unit
The dimension validates and deploys sucessfully - we have seen the notes to choose Deploy All for configuration instead of the default, reason being that if you don't choose Deploy All you will not be able to view it through the data viewer
We have mapped the data from our oracle staging table to the dimension and our map has run without error.
We can see data in the underlying table that supports the dimension, but when we open the dimension with object editor and try to view the loaded data via the dimension data view we get nothing?
What's up with that?
thx again
monalisaYou're probably running into the same known bug we hit. See the OWB 10gR2 release notes, under "Known Issues / OLAP Catalog". Probably hitting the mentioned OLAP bug 4945008.
Hope this helps,
Scott
Maybe you are looking for
-
Is there a way to have two payment cards under one apple id
Is there a way to have two payment cards under one apple id?
-
ITunes Crashes after clicking iTunes Store but updated with the latest version
iTunes Crashes after clicking iTunes Store. iTunes is updated with latest version still it didn't helped, have uninstalled & reinstalled. Provide some resoultion
-
HT1766 Password for restoring from backup
After updating my iphone to the new ios software it crashed now it is asking me to enter in a password to restore from the backup I did earlier today however I didn't get prompted to enter in a password. therefore how to I find out what my password i
-
Help, T420s display/video card issue!
Hi, all. I would appreciate for any input. Recently it happened a lot with my T420s especially when I was on full-screen video playback. The screen suddenly became like the image I attach below and there was no response at all. Then after 30 seconds
-
I can not run my own program. When i play Url, RealPlayer get an error said can not find the file when using real server URL . R: Error retrieving URL `rtsp://213.59.201.182:554/test/12' (Invalid Path) get object procedure is: create or replace proce