No data during upload from CRM

Hello
I am uploading activity data 0CRM_SALES_ACT_1 to BW.
CRM generates 1 record (transaction rsa6, crm). However, i dont see any record on BW side :
Processing (data packet) : no data
Can somebody knows the reason?

Hi Comandante,
I am guessing you are using a DTP to transfer data into your datastore.
Loading has been split up in a 2-step scenario :
1. First use a classic infopackage to load data up to PSA.
2. After that, you can upload your data from PSA into your SD using DTP.
Another possibility is that you are using a delta DTP and that the request has already been loaded into the DS before. The delta mode for DTP is based on request number, loaded into your PSA.
Hope this helps,
Best regards,
Olav

Similar Messages

How can i fix my mac book pro. My safari crashes all the time, my screen will turn black for no reason, My iPhoto crashes during upload from my iPhone, I can't highlight anything and I can't drag anything.

Someone PLEASE help me! I cant figure out what is going on with my computer. I don't install anything weird, but my brother does. He's very good at computer tech stuff and is in I.T, but I cant help but blame him for all the problems my Mac is having. Nothing works like it should. My safari will randomally crash, my screen will randomally turn back, my iphoto will crash during uploading from my iPhone, I cant highlight anything, I can't drag anything. When I want to click on something, I have to click over and over again just for it to even register. I know everything is up to date and recently reset my PRAM. I'm running Lion and have a lot of room on my hardrive. I have an external harddrive and I'm wondering if I should just move all of my important files over to it and completly wipe out my computer's hardrive and start from scratch.

Some folks can't leave well enough alone, and insist on downloading all sorts of additional "stuff" that ends up making their Mac unstable.
Standard Mac OS X on properly-operating Hardware does not crash, unless you start installing too many add-ons.
You can run "just the basics" by holding down the Shift key at Startup. This does one pass of Disk Repair, then loads a minimal set of extensions, and comes up in Safe Mode. If it works OK that way, but crashes in "regular", it's the add-ons.
There ia another layer of add-on junk that can be added to Safari. If the only remaining problem is Safari crashing, those add-ons can be disabled as well.

Filter Delta Upload from CRM into R3

Hi SAP gurus,
How can i set the filter for delta upload from CRM into R3? As far as i know, the filter settings in R3AC1 is only applicable for data exchange from the source system R3. What if i would like to filter the data where the source is CRM instead? Did i miss out anything in the configuration? I have been able to filter data coming from R3, but NOT data from CRM going into R3.
Would appreciate your help on this.
Thanks. Points will be rewarded.

Do you set all req.customizing in tr smoeac?

How To... Update Master Data during upload of transaction data

Can anybody let me know how this can be achieved.
I have datasource (Legacy not R3) where I am getting both master data and text for number of infoobjects.
I dont want separate datasources.
The datasource is actually transactional datasource.
I dont need text in the cubes or DSO I need the text tables of the infoobjects to be updated.
I could find this on SDN but do anyone have document based on the below link.I was not able to find it.
How To... Update Master Data during upload of transaction data
Thanks.

Dear Praveen
I guess yr req is demanding the knowledge of Data Unification and Synchronization whose scope is a bit outer the area of BW.( its MDM actually )
In BW we could very well fetch data out of different data sources (even across the different system) with no issues so why not u trying that. if there is any issue implementing that then please specify what kind of trouble you are interfacing...
I got the below link which may be helpful
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e7bd6389-0a01-0010-eb95-d45835d446a8

Where Can I settle an enhancement to delete a sales order item according to the data in BDOC from CRM?

Hi expert,
I have an urgent requirement from the client.
Delete the sales order item totally in ECC.
I planned to implement this enhancement in ECC. Check the data in BDOC from CRM middleware, according to the user status in the order item,decide whether the item can be deleted.
My question is,where can I settle this enhancement? The BADI name,user exit?
Thanks in advance.
Jerry.

Hi Jerry,
It may be delayed. you may found the solution.
Use BADI CRM_DATAEXCHG_BADI and try the code in MBDOC_FILL or BAPI_FILL method.
Regards,
Bala

How the data gets replicated from CRM to ISU

Hello All,
How the data gets replicated from CRM to ISU?
Would appreciate documents send to [email protected]
Regards,
Remi

Here is the link!
http://help.sap.com/saphelp_crm50/helpdata/en/c8/b0a68afbb3624cbabeb5ea12a8c639/frameset.htm
Cheer,
Daniel
http://sapro.blogspot.com

Help needed-Survey template data not flowing from CRM to Mobile & V V

Hi experts,
We have a requirement to create a custom survey template and pass it to mobile. The data flow should be to and fro. as in; from CRM to Mobile Application and vice versa.
Currently we are facing an issue in this that the data if not being passed properly from the CRM TO Moblie.
As i am new to the middleware concepts, i am not sure how to go about analysing if my data in the BDocs for the survey template if correct or not.Some data is present for the survey in the Bdoc(xml), but i am not sure if this xml value is correct or not as the Bdoc table entry (xml value)seems to have been truncated(i cannot view the entire xml there wen i try to open the BDoc fields in SMW01).
any pointers to this is highly appreciated.
Thanks
Swapna.

May be this thread will help
v('APP_USER') not returning HTMLDB user
regards,
Shijesh

Sending BP data during creation from BADI

hi experts,
i want to send a business partner's data during business partner creation in CRM through a BADI. do you know any of the BADI's for this purpose where i can get all the BP data entered by the user and i can send it wherever i want?

Hi Sager,
So here we go....
You can change the general flow in this fashion: Create/ Change any BP ,Activate the debugging and save it. Put the breakpoint for Method "__OUTBOUND_HANDLER" for class "CL_SMW_MFLOW". Press F8. You debugger should stop here.
You will see the peace of code mentioned below:-
Determine processing depending on debug processing, update processing
or synchronous processing
IF in_updatetask EQ c_false.
    IF NOT ch_header-qname IS INITIAL OR NOT lt_queues IS INITIAL.
    Check for debug mode. In debug mode, don't create qRFC entry
Delete the value of fields "in_updatetask" & "ch_header-qname" , and then press F8 now with this it should stop to your BADI givne the condition that you have breakpoint set for the BADI.
Hope this will help.
Best regards,
Vikash

Sales Area Data isnt replicating from CRM to ECC

Hi Gurus,
We are replicating some BPs of certain groupings from CRM to ECC.
We performed all steps relevant for this task mentioned in Best Practice u201CMaster Data Replication C03u201D. After performing the
steps results are as follows:
u2022     BP General Data is replicating without any trouble.
u2022     When registering sales area data in CRM and trying to get this replication to ECC we see that the BP Sales Area data isnu2019t replicated.
Monitoring SMW01.
The BDOC BUPA_MAIN ended with the following error:
Messages for business partner 0007000362: Fill in all required entry fields
Action already taken:
After reading this message I have reviewed the mandatory fields per Account Group in ECC and mapped them with the CRM ones. Even this changes I still can get sales area data in the ECC BPs replicated.
Is there something I am missing here.
Thanks for your help.

Hi,
Regarding debugging from CRM to R3. Please follow the below steps.
There are 2 methods to debug the Business Partner (BP).
First Method:
1)     In CRM, Go to SM59 -> ABAP Connections => The ECC client -> See if the saved user (in logon details) that is used to connect to ECC from CRM is a Dialog user.
2)     You can use transaction code SU01 to check User Type of User.
3)     Deregister the Queue through SMQS.
4)     Make changes to BP.
5)     Go to SMQ1, Select the Queue name Double Click 2 times then select the Tool bar (Debug LUW).
Second Method:
1)     Put a break point in Function Module SMW3_MFLOW_UPDATETASKBDOC.
2)     Create a BP and before save, type /h to activate debug, Mark update debugging option.
3)     When stops in Function Module u201CSMW3_MFLOW_UPDATETASKBDOCu201D you must be sure to set header-dbgmode = 'X' this will make the BDoc stay stopped in SMW01.
4)     Go to SMW01 and type /h and process the BDoc.
5)     Put a breakpoint in Function Module u201CCRM_UPLOAD_AFTER_MAP_HANDLERu201D and be sure to change LV_SYNCHRON = 'X' this will allow you to connect in ECC.
If the variable LV_SYNCHRON does not have any value, then it will work as background task, if the value is filled with the value u2018Xu2019, then it will allow debugging in R3.
And another point to be noted here is, the user type of the R3 should be Dialog User. If the user is not dialog, then it will not connect with R3.

Collision Detection during Upgrade from CRM 4.0 to CRM 2007

We are in the process of doing an upgrade from CRM 4.0 to CRM 2007. As part of this upgrade we are following the steps detailed in the mobile upgrade guide. we are currently working on the collision
resolution issues in the mobile area. The latest issue on the UI layer is caused by changes on tiles like docactdocu2 or capsearch2 that were reverted to standard SAP.
When solving the collisions we have been working on sub objects to these tiles. When changes to theses sub objects were finished not only the collision for the sub object was solved but no collision on the parent object was shown. But the result was that the parent objects have returned to SAP standard on vital objects like custom anchors and/or custom controllers are missing on these tiles resulting in build errors. You can easily see what happened in the version tree of these objects as no merge between the changed branch and the SAP branch took place.
Returning to the tiles version from the changed branch is not possible though this function is offered in the version tree.
Why is the collision resolution functionality not working as we would expect. Why can we not chsange the tile version to the changed branch.
Has anyone else experienced these issues
Regards
Eddie

Hi Shankar
We resolved collisions on script level like "docactdocu2onLoad" by merging or accepting the change list (SAP) version. With the collision on script level being resolved the tile the script belongs to (in this case "docactdocu2") also vanished from the collision list. The result was that the tile was reverted to the SAP version.
With the change list being released we cannot go back to the custom version of the tile except by using the version tree. But the option "Copy to Open Version" offered by a right click on the version node wanted does not work.
Any ideas
Regards
Eddie

Error in data upload from CRM to BI

Hi all,
Kindly help me with this error.
An exception occurred. This exception is dealt with in more detail below
. The exception, which is assigned to the class
'CX_SY_DYN_CALL_PARAM_NOT_FOUND', was neither
caught nor passed along using a RAISING clause, in the procedure
"SMOX3_GET_DATA" "(FUNCTION)" .
Data Source - 0CRM_LEAD_H. Error occured in RSA3 , in CRM

Hi Anup,
Check OSS Note 857278 - Generating DataSources with BWA adapters returns errors.
I am pasting the content of the note here:
Symptom
When you generate new fields from BWA DataSources, the system issues an error message:
"DataSource cannot be generated"
This affects the DataSources that use the CRM_BWA_GET_DATA_WITH_ARC extraction module:
0CRM_COMPLAINTS_I
0CRM_LEAD_ATTR
0CRM_LEAD_H
0CRM_LEAD_I
0CRM_OPPT_H
0CRM_OPPT_I
0CRM_QUOTATION_I
0CRM_QUOTA_ORDER_I
0CRM_SALES_ACT_1
0CRM_SALES_ACT_I
0CRM_SALES_CONTR_I
0CRM_SALES_ORDER_I
0CRM_SRV_CODES
0CRM_SRV_CONFIRM_H
0CRM_SRV_CONFIRM_I
0CRM_SRV_CONTRACT_H
0CRM_SRV_IBASE_TRAN
0CRM_SRV_PROCESS_H
0CRM_SRV_PROCESS_I
Other terms
EEW, CRM_BWA_GET_DATA_WITH_ARC, 0CRM_COMPLAINTS_I, 0CRM_LEAD_ATTR,
0CRM_LEAD_H, 0CRM_LEAD_I, 0CRM_OPPT_H, 0CRM_OPPT_I, 0CRM_QUOTATION_I, 0CRM_QUOTA_ORDER_I, 0CRM_SALES_ACT_1, 0CRM_SALES_ACT_I, 0CRM_SALES_CONTR_I, 0CRM_SALES_ORDER_I, 0CRM_SRV_CODES,
0CRM_SRV_CONFIRM_H, 0CRM_SRV_CONFIRM_I, 0CRM_SRV_CONTRACT_H, 0CRM_SRV_IBASE_TRAN, 0CRM_SRV_PROCESS_H, 0CRM_SRV_PROCESS_I
Reason and Prerequisites
To determine whether you had BWA or SAPI DataSources, only SMOX3_GET_DATA was checked for, since up to now the usage of CRM_BWA_GET_DATA_WITH_ARC was unknown.
Solution
Import Support Package 04 of SAP_ABA 7.0, Support Package 14 of SAP_ABA 6.40 or Support Package 54 of SAP_ABA 6.20 or implement the specified advance correction.
When you implement the advance correction for SAP_ABA 6.20, bear in mind that Note 605469 is a prerequisite for this release.
After you implement this note, also implement Note 996352, so that the system will use the correct extractor.
Bye
Dinesh

CRM Open Catalog Interface (OCI) - What data is sent from CRM/ISA to SRM?

RE: CRM4
We have an SRM customer that is able to access our online catalog as expected, create a shopping cart and transfer it to their SRM system. However, they're asking that we provide additional information on the item(s) and I can not determine what data is sent in the first place, let alone how to add additional information. Specifically, they require that the UNSPSC code is included in the data...the format for which should look something like this:
NEW_ITEM-MATGROUP = 465120000
I have determined the 'how' the data is sent (via HTML if OCI_VERSION = 1) and the file that's called once the SRM customer clicks the TRANSFER button on our CRM/ISA (ocilinessend.jsp)
But, I am unable to determine the 'what' data is sent.
According to the javascript file, here's the code that is activated:
<%-- send list with oci lines --%>
<form action="<%= request.getAttribute(OciLinesSendAction.OCI_HOOK_URL)%>" method="post"
name="SUBMITFORM" target="<%=request.getAttribute(OciLinesSendAction.OCI_TARGET)%>">
<% String param = (String)request.getAttribute(OciLinesSendAction.OCI_OKCODE); %>
<% if (param != null) { %>
    <input type="hidden" name="<%=OciLinesSendAction.OCI_OKCODE%>" value="<%=param%>">
<% } %>
<% param = (String)request.getAttribute(OciLinesSendAction.OCI_CALLER); %>
<% if (param != null) { %>
    <input type="hidden" name="<%=OciLinesSendAction.OCI_CALLER%>" value="<%=param%>">
<% } %>
<% OciLineList ociLineList =
    (OciLineList)pageContext.findAttribute(OciLinesSendAction.OCI_LINE_LIST); %>
<% for (int i=0; i < ociLineList.size(); i++) { %><%=ociLineList.get(i)+"\n"%><% } %>
</form>
So, does anyone know how this works? How does data get flagged as being relevant to be sent via an OCI Transfer?
I can not believe how limited the SAP documentation is on the CRM side of this connectivity...the SRM side has a huge amount of documentation, but none of it specifically deals with how to get a CRM connection up and running. You'd think they'd especially want to have customers using SAP on both sides of the connection...

I have made some progress finally.
The items that the .jsp file sends are apparently triggered when the customer clicks on the Transfer button and the FM CRM_ISA_BASKET_GETITEMS_BBP runs.
The FM ends up pulling data from the UI Structure CRMT_ISALES_BASKETITEM_BBP which you can modify the fields sent by using transaction CRMC_MAP to add a New Entry -> UI Field, named MATGROUP with Object ORDERADM_I and one of the 42 Obj.Field's available. I ran a test with our customer and they confirmed that the MATGROUP was now indeed being sent during the transfer.
So, now my dilemma is trying to figure out which Obj.Field already is set up for UNSPSC numbers or if there is another Object in CRM that I should look in.
In the IMG, there are SRM settings for UN/SPSC numbers, but I can not find a corresponding CRM setting.
Anyone have an idea on which Obj.Field we should use ... or perhaps one which we can map from our ERP backend to CRM that will work without having to create a new Obj.Field, which is really not what we want to have to do.

Master Data Flexible Upload from Application Server?

Hi Group,
Anyone know if it's possible to do a flexible upload of master data from a flat file on the application server?
I'd like to upload FS items and hierarchies from the BCS app server into our development environment, then transport to QA & PROD. We would obviously need some way to "save" after the upload was complete.
In the workbench, I can right click--> execute on the flex upload method and get a pop-up for a workstation file. In a data collection method, I can specify a logical file & filename, but I cannot choose master data (which might have allowed me to run a data collection method via the workbench).
Anyone accomplished this before? Or have any ideas if/how this is possible?
Thanks,
- Chris

Hi Christopher,
It is not possible to assign Flexible Upload Method with Master Data to be assigned to Data Collection Method.
Flexible Upload with Master Data should be executed independently from Workbench. This is system design.
Regards
Narayana Murty

How to get location data when uploading from DSLR?

I have read that you can't add or edit location data when files are added to Photos in the new Yosemite version. But does the location still get added when you upload via a wireless connection like on the iPad?
If not, is there a workaround?I have ended up with thousands of photos on the iMac with no location data as a result of the upgrade. I don't want to make the problem worse.
Any help or advice appreciated.

I'm not exacting sure what the difference between tagging and geotagging is. I do know that at present on my ipad (and I haven't upgraded it from IOS7 yet), if I import my DSLR photos to the ipad, when in a wifi environment, it adds the location to the photos where they were uploaded. Without wifi, no location gets added. I actually haven't figured out a way to add location data to the photos using the ipad, is there a way? I have always been advised before to use my mac to do that, which is no longer possible in Yosemite as far as I can tell.

Get original file creation and modified date during upload - ONLY in explorerview ??

Hi,
SharePoint and me are having a difficult time again ;-)
I have the customer requirement to retain the original file's creation date and modified date.
Please do not start replying by just pasting links that you might find while searching for the keywords "retain creation date".
In a nutshell I found out that the original dates are only available in SharePoint if the
explorerview has been used. I always thought that the explorerview is a bad thing, but only here - the original creation date is stored in a property called "vti_ct". In the itemupdated eventreceiver you can get the
value and work with it.
Complete list of available properties
http://sbrickey.com/Tech/Blog/Post/Secrets_Revealed_SP_Event_Receivers_firing_multiple_times
Here I found the hint with the explorerview
http://answers.flyppdevportal.com/categories/sharepoint2010/sharepoint2010programming.aspx?ID=57bfd5f5-941f-4a89-919d-cdf7b0b801be
It is only available in the 2nd loop of the itemupdated event.
How the f*** can this happen??? The 2nd post states that when using the explorerview the file is being copied, while it is being re-created by using the SharePoint UI.
Has anyone a different approach for using the SharePoint UI?
I thought about different approaches for this issue. From my perspective it seems to be not solvable from the server-side. It seems only to be able to be set using a client application.
Example 1: spbulkdocumentimport
http://spbulkdocumentimport.codeplex.com/wikipage?title=Features&referringTitle=Documentation
Example 2: implement a custom webservice
http://blog.orbitone.com/post/Preserve-created-and-modified-information-when-importing-a-document-in-SharePoint
How do you deal with this customer requirement?
Open for discussions
Sven

Hi,
Newbie to SharePoint, learn quite a lot from the links you provided.
“I found out that the original dates are only available in SharePoint if the explorerview has been used”, this would make sense because the original creation time is generated
by the file system in the local machine.
However, when a file is uploaded to SharePoint library, it will be stored as binary data in the database, as well as the newly created time. It means that it will be a “new” file
in the SharePoint site regardless of where it comes from.
Per my knowledge, the only way I can suggest is that you will need to create a client desktop application for the file uploading, which will be a more general way not only for
uploading a file, but also when we need to migrate files between different systems.
Thanks

No data during upload from CRM

Similar Messages

Maybe you are looking for