No Data Found Error in Transaction Source Types Form

Hi All,
We are using 11.5.10.2 version of Oracle Apps.
When i navigate to INV responsibility, Setup -> Transactions -> Source Types, upon the opening of the Transaction Source Types form, i get a series of "No Data Found" error pop up messages. I searched in metalink too but couldn't find any resolution for the same.
Does anyone know as to how to resolve this issue? Is there any patch that needs to applied? Kindly help.
Regards,
Hemanth

Hi Julie,
On the "Process Row of..." process, make sure that it is unconditional and that the Delete opertion checkbox is ticked. Deletions from the main table should only be triggered by a DELETE request which should be issued by the "Delete" button.
On the "Apply MRD" process, make sure that the condition is "Request is Contained within Expression 1" and Expression 1 is: APPLY_CHANGES_MRD,SAVE
This process should be triggered by the "Delete Checked" button, which should have a URL target of:
javascript:confirmDelete(htmldb_delete_message,'APPLY_CHANGES_MRD');This triggers the confirmation popup and submits the page with APPLY_CHANGES_MRD as the REQUEST value which should be picked up by the "Apply MRD" process only.
Andy

Similar Messages

  • ORA-01403- No data found error on Pricing and availabiltiy form

    ORA-01403- No data found error on Pricing and availabiltiy form
    whenever user click on item availability in Pricing and Availability form ,this issue appears. Can any one let me know the cause.
    Thanks
    Payal

    941250 wrote:
    Thanks Mahendra,
    I have already read this article and accorind to it our instance is already ATP enabled. But still we are facing the error.
    Thanks
    PayalPlease see if (OEXPRAVA ORA-01403 Item Availability Not Displaying In Price and Availability Form [ID 290251.1]) helps.
    Thanks,
    Hussein

  • Deferred transaction fails due to a "ORA-01403: no data found" error

    I recently acticated replication between two Oracle instances.
    (one being the master definition site and the other one being
    a second master site).
    Everything was going well until two weeks ago, when i realized
    that some datas were different between the two Oracle instances.
    I tried to figure out why and found that some deferred transation
    failed to propagate due to a "ORA-01403: no data found" error.
    Not all transaction fail, only a few.
    All the errors are stored in the DEFERROR table of the second
    master site, the DEFERROR table is empty in the master definition
    site.
    For every error, the source is the master definition site and the
    destination is the second master site, which is OK because the
    second master site is supposed to be "read-only". But why are the
    errors stored in the DEFERROR table of the second master site
    (and not in the master definition site (the source)).
    Most errors occur on UPDATE statements but a few of them occur
    on DELETE statements. Given the fact that the record actually is
    in the second master site, how is it possible to get a
    "ORA-01403: no data found" error on a delete statement ???????
    I can't figure out what data cannot be found,
    Thanks for your help,
    Didier.

    What if i tell you the first transaction in error is an UPDATE
    statement on a record that actually is in the destination table
    in the second master site. So the data is there, it should be
    found ...
    I've tried an EXECUTE_ERROR on that very first transaction
    in error but it doesn't work. Here's the call (as repadmin) :
    begin
    DBMS_DEFER_SYS.EXECUTE_ERROR (
    DEFERRED_TRAN_ID => '6.42.271',
    DESTINATION => 'AMELIPI.SENAT.FR'
    end ;
    And here's the full message :
    ORA-01403: no data found
    ORA-06512: at "SYS.DBMS_DEFER_SYS_PART1" line 430
    ORA-06512: at "SYS.DBMS_DEFER_SYS" line 1632
    ORA-06512: at "SYS.DBMS_DEFER_SYS" line 1678
    ORA-06512: at line 2
    I thought it could be because the primary key constraint on the
    destination table wasn't activated but it was. Could it
    be a problem with the corresponding index ?
    Thanks for your help,
    Didier.

  • ORA-01403 No Data Found error on Update

    I am having difficulty troubleshooting a form (6i) where the data can not be updated. This form was recently modified by another developer (who is no longer w/ us) and we removed a unique key from the items list in the data block, however the particular field is still contained in the table. There are no constraints on any fields in this table.
    I have a button pallette in the form and when I try to update and save, I get the "No Data Found" error message. However, I know there is data in the record but I can not figure out why the error.
    When I display the error, the sql code looks something like this:
    UPDATE db.temp
    SET P_ID=:1,S_ID=:2
    WHERE ROWID=:3
    I put a message in the do_key('list_values') trigger to show me the rowid but nothing comes up. I wonder if this has something to do with that and if so, why and how do I fix it?
    Appreciate any direction any of you can provide in coming to a solution on this. Thank you.

    I don't explicitly say ROWID=:3, what I mean, I
    didn't code the update query. My understanding is
    that it is done behind the scenes given the items in
    the data block. Ok, I couldn't tell from the post whether it was explicit or not. This is from
    Oracle FAQ:
    "I get 'NO DATA FOUND' errors. How does one handle this?
    An ORA-1403 (No Data Found) error is signalled within a replicated environment when there is a conflict in data. Here is an illustration of what happens in most scenarios featuring this error:
    Let's say we need to update a table and set column x=1 where x=9. When the first change occurs on the source database, Oracle checks to ensure that x=9. Once this transaction commits, it is queued for execution on the destination site(s). When the transaction is applied to the destinations, Oracle first check to verify that x=9 (the old value); if it does, then Oracle applies the update (update table set x = 1 where x = 9); if it does not, an entry to the DEFERROR table is logged indicating ORA-1403.
    If the application is updating primary key values, one can also expect plenty "NO DATA FOUND" errors. Primary keys should NEVER be updated. If one updates primary key values, conflict resolution also becomes extremely difficult. "
    Check your pll file and anywhere else you are using db.temp. Then check the the update using PLSQL.

  • I am getting ORA-01403: no data found error while calling a stored procedur

    Hi, I have a stored procedure. When I execute it from Toad it is successfull.
    But when I call that from my java function it gives me ORA-01403: no data found error -
    My code is like this -
    SELECT COUNT(*) INTO L_N_CNT FROM TLSI_SI_MAST WHERE UPPER(CUST_CD) =UPPER(R_V_CUST_CD) AND
    UPPER(ACCT_CD)=UPPER(R_V_ACCT_CD) AND UPPER(CNSGE_CD)=UPPER(R_V_CNSGE_CD) AND
    UPPER(FINALDEST_CD)=UPPER(R_V_FINALDEST_CD) AND     UPPER(TPT_TYPE)=UPPER(R_V_TPT_TYPE);
         IF L_N_CNT >0 THEN
              DBMS_OUTPUT.PUT_LINE('ERROR -DUPlicate SI-1');
              SP_SEL_ERR_MSG(5,R_V_ERROR_MSG);
              RETURN;
         ELSE
              DBMS_OUTPUT.PUT_LINE('BEFORE-INSERT');
              INSERT INTO TLSI_SI_MAST
                   (     CUST_CD, ACCT_CD, CNSGE_CD, FINALDEST_CD, TPT_TYPE,
                        ACCT_NM, CUST_NM,CNSGE_NM, CNSGE_ADDR1, CNSGE_ADDR2,CNSGE_ADDR3,
                        CNSGE_ADDR4, CNSGE_ATTN, EFFECTIVE_DT, MAINT_DT,
                        POD_CD, DELVY_PL_CD, TRANSSHIP,PARTSHIPMT, FREIGHT,
                        PREPAID_BY, COLLECT_BY, BL_REMARK1, BL_REMARK2,
                        MCC_IND, NOMINATION, NOTIFY_P1_NM,NOTIFY_P1_ATTN , NOTIFY_P1_ADDR1,
                        NOTIFY_P1_ADDR2, NOTIFY_P1_ADDR3, NOTIFY_P1_ADDR4,NOTIFY_P2_NM,NOTIFY_P2_ATTN ,
                        NOTIFY_P2_ADDR1,NOTIFY_P2_ADDR2, NOTIFY_P2_ADDR3, NOTIFY_P2_ADDR4,
                        NOTIFY_P3_NM,NOTIFY_P3_ATTN , NOTIFY_P3_ADDR1,NOTIFY_P3_ADDR2, NOTIFY_P3_ADDR3,
                        NOTIFY_P3_ADDR4,CREATION_DT, ACCT_ATTN, SCC_IND, CREAT_BY, MAINT_BY
                        VALUES(     R_V_CUST_CD,R_V_ACCT_CD,R_V_CNSGE_CD,R_V_FINALDEST_CD,R_V_TPT_TYPE,
                        R_V_ACCT_NM,R_V_CUST_NM ,R_V_CNSGE_NM, R_V_CNSGE_ADDR1,R_V_CNSGE_ADDR2, R_V_CNSGE_ADDR3,
                        R_V_CNSGE_ADDR4,R_V_CNSGE_ATTN,     R_V_EFFECTIVE_DT ,SYSDATE, R_V_POD_CD,R_V_DELVY_PL_CD,R_V_TRANSSHIP ,R_V_PARTSHIPMT , R_V_FREIGHT,
                        R_V_PREPAID_BY ,R_V_COLLECT_BY ,R_V_BL_REMARK1 ,R_V_BL_REMARK2,R_V_MCC_IND,
                        R_V_NOMINATION,R_V_NOTIFY_P1_NM, R_V_NOTIFY_P1_ATTN, R_V_NOTIFY_P1_ADD1, R_V_NOTIFY_P1_ADD2,
                        R_V_NOTIFY_P1_ADD3, R_V_NOTIFY_P1_ADD4, R_V_NOTIFY_P2_NM, R_V_NOTIFY_P2_ATTN, R_V_NOTIFY_P2_ADD1,
                        R_V_NOTIFY_P2_ADD2, R_V_NOTIFY_P2_ADD3, R_V_NOTIFY_P2_ADD4, R_V_NOTIFY_P3_NM, R_V_NOTIFY_P3_ATTN,
                        R_V_NOTIFY_P3_ADD1, R_V_NOTIFY_P3_ADD2, R_V_NOTIFY_P3_ADD3, R_V_NOTIFY_P3_ADD4,
                        SYSDATE,R_V_ACCT_ATTN,R_V_SCC_IND,R_V_USER_ID,R_V_USER_ID
                        DBMS_OUTPUT.PUT_LINE(' SI - REC -INSERTED');
         END IF;

    Hi,
    I think there is a part of the stored procedure you did not displayed in your post. I think your issue is probably due to a parsed value from java. For example when calling a procedure from java and the data type from java is different than expected by the procedure the ORA-01403 could be encountered. Can you please show the exact construction of the call of the procedure from within java and also how the procedure possible is provided with an input parameter.
    Regards, Gerwin

  • No Data Found Error in wwv_flow_files

    Hello All,
    I have written a procedure to upload the .csv file data into one of my database Table. It was working fine some days back, but when I try to upload a .csv today, it gives me error "No Data Found".
    This is the Query I am using to fetch the data from wwv_flow_files table:
    select blob_content into v_blob_data
    from wwv_flow_files
    where last_updated = (select max(last_updated) from wwv_flow_files where UPDATED_BY = UPPER(:APP_USER))
    and id = (select max(id) from wwv_flow_files where updated_by = UPPER(:APP_USER));
    this is returning No data found error.
    Please suggest what is the problem.
    Apex vesion : 4.0.1.00.03
    DB: 11g
    Thanks
    Tauceef

    Hi Trent,
    As I said, I am using this code from a long time ago, it was working fine before and I have uploaded many files using this code.
    But suddenly I don't know what happen it start giving this error.
    For making sure that this statement is the one which is giving "no data found" error I commented all the other select statements
    and I still got no data found. So it's confirmed.
    One more thing, I tried to run this code in SQL command by hard coding the :APP_USER value and this is what I got in the result:
    BLOB_CONTENT
    [unsupported data type]
    means this code is returning something but at run time it is giving no data found.
    Please suggest.
    Thanks
    Tauceef

  • Streams apply having 60k no data found error

    We have implemented streams recently. The configuration and streaming is happening fine. The only problem I am having is "NO DATA FOUND" error in apply.
    It's uni-directional streaming
    We are not really updating/deleting/inserting any row on the destination database. (both oracle).
    Why am I seeing 60k Conflicts?
    Is there any configuration am I missing?
    How can I fix the no data found issue and make my stream 100 percent perfect real time.
    Thanks in advance
    Palani

    Print the transaction/LCR using print_transaction/print_lcr. Compare the old values from the LCR to values in destination database table. There must be one or more column values differ. Trace back to the root operation which is causing the value difference and fix it.
    Otherwise you can configure the streams apply process not to compare the old values except keys by using DBMS_APPLY_ADM.COMPARE_OLD_VALUES.

  • Ignore "no data found" error  in apply

    Hi
    DB VERSION = 10.2.0.4
    i got error "ORA-01403: no data found" in dba_apply_error after deleting some data from my table
    and now i want to ingore it.what i must to do?

    That is dealing with the problem after the fact. What is the intent of the question - ignore while that takes place or how to manage it after the fact?
    While it takes place - Add a rule/DML handler/error handler to capture the exception and ignore/fix it.
    When an apply process moves a transaction to the error queue, you can examine the transaction to analyze the feasibility reexecuting the transaction successfully. If an abnormality is found in the transaction, then you might be able to configure a DML handler to correct the problem. In this case, configure the DML handler to run when you reexecute the error transaction.No data found error in Streams:
    http://download.oracle.com/docs/cd/B28359_01/server.111/b28322/troub_rep.htm#i1015040
    Error handler:
    http://download.oracle.com/docs/cd/E11882_01/server.112/e17069/strms_mapply.htm#STRMS144
    You can also set disable_on_error to No and drive on, but not necessarily a good idea as that opens the door for many errors to occur, so you would want to be checking the error queue periodically/regularly.

  • Do Data Found Error on Inserting a Record

    I am working in Apex 4.0.
    I'm getting this error when I click the "Create" button to insert a record.
    ORA-01403: no data found
         Error      Unable to fetch row.
    Since I'm inserting rather than fetching, why would I get this error? What do I need to do to suppress it?

    Arie, thanks for the response. I suspected the automatic Row Processing might be the problem. But I did not (and still don't) know how to fix it.
    Here's what's happening. The page involved is part of an insurance tracking system. At the time of annual renewal of a policy, we create a new record for the next year. This is done by including in the new record all usuable data fields from the old expiring record. I use a button to navigate to the current page (page 22 to page 22) and set values (from the old page 22) of items in the new page 22. The user then makes a couple of manual entries and then clicks the "Create" button which appears on the new page 22 since the primary key is null. The new record is then correctly inserted into the table, and the system branches back to a calling page. It is at this time that the error occurs.
    ORA-01403: no data found
    Error Unable to fetch row.
    A database trigger gets the new primary key from a sequence generator and puts it into the record on insert. Here's the SQL on the trigger:
    CREATE OR REPLACE TRIGGER "UCC_AUTO_SEQ"
    BEFORE
    insert on "UCC"
    for each row
    begin
    select ucc_seq.nextval
    into :new.uccseq
    from dual;
    end;
    May be that I can fix this if you will explain to me what you mean by this: "My guess is that your page includes an ARF process and you didn’t set the return key item, or you didn’t use the RETURNING clause, so the ARF process can’t fetch the newly inserted record." Forgive my ignorance, but I do not know what a "RETURNING clause" is. I checked out the Source: Automatic Row Processing (DML) and found that the item labeled "Return Key Into Item" was blank. I put "P22_INSURESEQ" (the primary key item) into this field, but the error is still being thrown. The "Action Processed" message always appears in its own window just above the error message.

  • No data found error on Form on a Table with report

    Hi Everyone, I'm using Application Express 4.1.0.00.32 on Windows 7. I built a Form on a table with report. Earlier I was using rowid as a passing parameter but then I had to change it to primary key column from report to form.
    So in the "Fetch row process" I changed the "Items containing primary key value" and "Primary Key column" to P1004_PERSON_ID and PERSON_ID respectively. Which is my primary key.
    My Form is working exactly fine but at on point it throws "no data found error".
    I have a required date field in the form. So if the user doesn't fill in the date field and try to save the form, it throws the "Feild required error" and then when user enters date and try to save then it throws the error "No data found.". here is the snapshot... snapshot
    How can I fix this error.I'm really stuck.
    I checked debubber..it is as follows... in debughger it's still showing rowid. I don't know why. How can I fix that.
    Execution
    Message
    Level
    Graph
    0.00233
    0.00932
    S H O W: application="101" page="1004" workspace="" request="" session="123235901404364"
    4
    0.01161
    0.00102
    Language derived from: FLOW_PRIMARY_LANGUAGE, current browser language: en-us
    4
    0.01261
    0.00046
    alter session set nls_language="AMERICAN"
    4
    0.01307
    0.00042
    alter session set nls_territory="AMERICA"
    4
    0.01348
    0.00053
    NLS: CSV charset=WE8MSWIN1252
    4
    0.01401
    0.00042
    ...NLS: Set Decimal separator="."
    4
    0.01443
    0.00053
    ...NLS: Set NLS Group separator=","
    4
    0.01495
    0.00050
    ...NLS: Set g_nls_date_format="DD-MON-RR"
    4
    0.01545
    0.00051
    ...NLS: Set g_nls_timestamp_format="DD-MON-RR HH.MI.SSXFF AM"
    4
    0.01597
    0.00050
    ...NLS: Set g_nls_timestamp_tz_format="DD-MON-RR HH.MI.SSXFF AM TZR"
    4
    0.01647
    0.00079
    ...Setting session time_zone to -05:00
    4
    0.01726
    0.00046
    Setting NLS_DATE_FORMAT to application date format: DD-MON-YYYY
    4
    0.01772
    0.00060
    Setting NLS_TIMESTAMP_FORMAT to application timestamp format: DD-MON-YYYY HH24.MI.SSXFF
    4
    0.01832
    0.00092
    ...NLS: Set g_nls_date_format="DD-MON-YYYY"
    4
    0.01924
    0.00049
    ...NLS: Set g_nls_timestamp_format="DD-MON-YYYY HH24.MI.SSXFF"
    4
    0.01973
    0.00083
    ...NLS: Set g_nls_timestamp_tz_format="DD-MON-RR HH.MI.SSXFF AM TZR"
    4
    0.02056
    0.00099
    NLS: Language=en-us
    4
    0.02154
    0.00157
    Application 101, Authentication: PLUGIN, Page Template: 5091946581246503
    4
    0.02312
    0.00065
    ...fetch session state from database
    4
    0.02377
    0.00106
    fetch items
    4
    0.02483
    0.00065
    ...fetched 103 session state items
    4
    0.02548
    0.00194
    Authentication check: NTLM (NATIVE_CUSTOM)
    4
    0.02742
    0.00188
    ...Execute Statement: begin declare begin wwv_flow.g_boolean := f_ntlm_page_sentry_parm; end; end;
    4
    0.02930
    0.00050
    ... sentry+verification success
    4
    0.02980
    0.00042
    ...Session ID 123235901404364 can be used
    4
    0.03021
    0.00114
    ...Application session: 123235901404364, user=VARMAN01
    4
    0.03135
    0.00162
    ...Check for session expiration:
    4
    0.03297
    0.00075
    Session: Fetch session header information
    4
    0.03372
    0.00113
    ...Setting session time_zone to -5:00
    4
    0.03485
    0.00080
    Branch point: Before Header
    4
    0.03565
    0.00598
    Fetch application meta data
    4
    0.04165
    0.00081
    ...metadata, fetch computations
    4
    0.04245
    0.00076
    ...metadata, fetch buttons
    4
    0.04321
    0.00086
    Setting NLS_DATE_FORMAT to application date format: DD-MON-YYYY
    4
    0.04406
    0.00058
    Setting NLS_TIMESTAMP_FORMAT to application timestamp format: DD-MON-YYYY HH24.MI.SSXFF
    4
    0.04464
    0.00049

    Just an observance... SQL is still showing the rowid instead of the P1004_PERSON_ID ??
    where "PERSON_ID" = :p_rowid;
    should it not be :
    where "PERSON_ID" = :P1004_PERSON_ID:
    thx, Bill

  • Getting 'No Data found' Error when clicking the edit link to edit a record.

    Application Express 4.2.0
    Database: oracle 11g
    Hi Guys
    I am getting an error whenever i try to edit some of my entries by clicking the edit link, i have a composite Primary key attributes of three columns ( Budget Year ('YYYY'), Training Name('VARCHAR') and Emp Code ('VARCHAR')
    Some records will load when i click Edit but some wont and return 'ORA-01403: no data found' error.
    Any help will be appriciated.
    Thanx
    MATT

    Hi,
    Please create example about problem to apex.oracle.com and share developer login details to workspace.
    Regards,
    Jari

  • No data found Error

    Hi all ,
    Following code throwing no data found error.
    It is working properly for IF x <> 0 condition but when count(*) is 0 then it's thrrowing error.
    earlier same code working properly as our client is using this application.
    code on when_button_pressed trigger:
    DECLARE
    user1 VARCHAR2(20);
    x NUMBER(4);
    BEGIN
    FOR c1 IN( SELECT COUNT(*) x
    FROM vinay.file_proc
    WHERE sector = :sector
    and block = :block1
    and plot_no= :plotno
    and plot_size = :plotsize)
    LOOP
    x := c1.x;
    END LOOP;
    IF x <> 0 THEN
    MESSAGE('Record Exists');
    MESSAGE(' ');
    RAISE FORM_TRIGGER_FAILURE;
    END IF;
    MESSAGE(' after if');
    MESSAGE(' after if');
    win_api_utility.copy_file(ltrim(rtrim(:ADRIVE1)),ltrim(rtrim(:DESTINATION)),TRUE,TRUE);
    MESSAGE(' copy file');
    MESSAGE(' ');
    SELECT user INTO user1 FROM DUAL;
    INSERT INTO vinay.file_proc values(:sector,:block1,:plotno,:plotsize,user1,sysdate);
    COMMIT;
    MESSAGE(' ');
    CLEAR_BLOCK(NO_VALIDATE);
    END;
    :block2.path1:=:global.drive1;
    GO_ITEM('BLOCK2.ADRIVE');

    Hi,
    I think there is a problem with WIN_API_UTILITY.copy_file can anybody tell me if there is any restriction with this package.

  • AFTER INSERT TIGGER, ora-01403: no data found error

    Hi all,
    I'm trying to create a fairly simple trigger which fires after an insert on a table.
    The trigger is based on a function, defined within a package. The function is as follows...
    FUNCTION check_contract_length (V_playerId IN NUMBER)
    RETURN BOOLEAN
    IS
    months NUMBER;
    months2 NUMBER;
    BEGIN
    SELECT months_between(contract_end, contract_start), contract_length
    INTO months, months2
    FROM player
    WHERE playerId = v_playerId;
    IF months <> months2 THEN
    RETURN (true);
    END IF;
    RETURN (false);
    END check_contract_length;The trigger operates when an insert is made on to the player table, it as defined as follows...
    CREATE OR REPLACE TRIGGER play_ins_con
    AFTER INSERT ON player
    FOR EACH ROW
    DECLARE
    isover BOOLEAN;
    BEGIN
    IF INSERTING THEN
    isover := player_constr_pkg.check_contract_length(:new.playerId);
    IF isover THEN
    RAISE_APPLICATION_ERROR(-30001, 'Contract length incorrect');
    END IF;
    END IF;
    END play_ins_con;My problem is, is that every time I try to insert a row into the player table, the trigger fires and produces a "ora-01403: no data found" error. I was under the impression that as the trigger fires after an insert, this shouldn't be a problem.
    I'm also aware that this constraint can probably be implemented using a CHECK constraint, however it would be a learning curve for me to work it out this way.
    Any help would be much appreciated!!
    Cheers guys.

    I'm also aware that this constraint can probably be implemented using a CHECK constraint,
    however it would be a learning curve for me to work it out this way.Starting out by doing stuff the wrong way only increases the learning curve when it comes to doing things the right way. A check constraint is definitely the best way of doing it. However, if you must do it with a trigger this is the way to go:
    CREATE OR REPLACE TRIGGER play_ins_con BEFORE INSERT ON player
    FOR EACH ROW
    BEGIN
        IF months_between(:NEW.contract_end, :NEW.contract_start) <> :NEW.contract_length
        THEN
            RAISE_APPLICATION_ERROR(-30001, 'Contract length incorrect');
        END IF;
    END play_ins_con;
    /Incidentally, as CONTRACT_LENGTH is wholly derivable from the other columns your table structure is obviously insufficiently normalised.
    Also, note that only errors between -20999 and -20000 are reserved for our use. Any other number may be used by Oracle for its own purposes.
    Cheers, APC

  • APEX bug:9879227 (ORA-01403: no data found error when using validations)

    Hi,
    We are getting the
    ORA-01403: no data found error
    when the APEX page has validations AND a tabular form is also present on the page.
    I did see a couple of other forum links discussing the issue (bug id: 9879227 ?? ).
    But what i want to get a confirmation on is, in which release was this bug really fixed ?
    i see the release notes of 4.0.1.00.03 claiming that it is fixed
    in the release.
    we are on 4.0.1.00.03. is this bug really solved in release 4.0.1.00.03?
    are there any known work-arounds ? i tried re-creating the report multiple times, but that did not help.
    Any suggestions or work-arounds will greatly help us.
    Regards,
    Ramakrishnan

    Ramakrishnan,
    If you are talking about getting no data found when trying to save the report then take a look at the last message in this thread:
    {message:id=9971445}
    Cheers,
    Tyson Jouglet

  • Misterious "ORA-01403: no data found" error

    Hi,
    I've been searching through the forum and the Internet with no results, so I'm posting here hoping you can help me.
    Here is the situation: I had a page 30 with a tree branching to a form on a view.This worked fine until one day that suddenly, we got the "ORA-01403: no data found" error when loading the page. I guess that's normal, since the form shows the data filtered in the tree (in the tree we click on an element and pass its ROWID to the form), and when we load the page no ROWID is selected. So, the first question would be, how can I manage this situation? My first option was to have a condition in the Automatic Fetch for the Form, so that it's executed only when the ROWID item is not null. It worked a couple of times. After a while, it crashed again.
    Tired of trying things, we decided to copy this page 30 to another page (page #80). Surprisingly, page #80 worked meanwhile #30 crashed. And they are completely the same, the data has not changed either.
    Could it be that page #30 somehow is corrupted? It's really strange that the same exact copy of the page works with one ID but not with another one.
    Has someone experienced this situation? it makes me feel like the app is unsecure and unstable. Any ideas, please?
    Apex version: 4.1.1 on APEX listener.
    Thanks,
    Elena.

    fac586 wrote:
    Elena.mtc wrote:
    Thanks for your response. The form is a single row (a form on a table or view). Here is what I've found out thanks to your tips:
    It affects to all the three users that I have access with.Try it with a new user that has never accessed the page before.
    I used the debug mode (new to me, so I'm kind of slow on this, still) and wrote an exception message on the Automatic Fetch Row and I managed to know the ROWID that the fetch process is using in the where clause. Of course this ROWID does not exist in the table, so the first question that comes to my mind is "how come and from where is the page getting this ROWID?". I don't know and can't comment because I can't see the app. ;-)
    If the ROWID is stored in an item, check the Maintain session state property isn't set to Per User.I changed this and seemed to work. But it crashed later. I made a computation process to set to null the rowid's when loading the page. After reset, I deleted the computations (due to application functionality) and it worked. However, I do not trust this page anymore. So we created a new fresh app and copied this page. Luckily we are on development environment :)
    >
    So, I made a computation to initialize to null the item that saves the ROWID, and now it worked.
    This page that I'm testing on is #30, but the valid page is #80 (it has changes made on the look and feel of the page). So, I deleted page #30, and copied page #80 (which works perfectly) into #30. And it crashes again (obvius, since it doesn't have the computation that gives null to the rowid item). What's "interesting" is that I still see the exception message I wrote in the older version of page #30. So, it seems that some values need to be purged and that the delete is not clean, but how? I'm not entirely clear on what you've been doing there, but it does indeed all sound rather odd.
    I suspect that you wouldn't be able to reproduce this problem on apex.oracle.com. However, it would probably be helpful if you could upload the app and provide developer credentials to the workspace so we could see how it works and if there's anything obvious (or not) that might cause this problem.Unluckily I cannot do this. Thank you anyway for the help, it's hard to explain when something so weird happens.
    Thanks!
    Elena.

Maybe you are looking for