No data found error while creating po using interface
Hi all,
I am a beginner in Oracle applications. I am trying to create a PO and line using interface tables.
I am getting the below error when I run my concurrent program:
I do see my records in my staging tables and in PO HEADERS INTERFACE and
PO LINES INTERFACE table and there are no errors in the my sql loader programs.
However there is an error in Import Standard Purchase Orders program:
The below is the error from log:
ora nodata found in package PO.PLSQL.PO_PDOI_PVT
user defined exception in package PO.PLSQL.PO_PDOI_CONCURRENT
There is no record in fng log messages table with the AUDSID provided in the log file!
I am not sure what to do.
Any suggestions?
Thanks.
Hi.
Can you please advise the value for column "PROCESS_CODE" in the PO_HEADERS_INTERFACE table? Did you check the Purchasing Interface Errors report also for any errors?
Additionally, it will help if you can copy/paste the insert code for the interface tables ....
A good detailed explanation of the Purchase Order interface is in the following document:
http://docs.oracle.com/cd/A85683_01/acrobat/115mfgoim.pdf
See if that helps.
Cheers
JD
Similar Messages
-
Error while creating stock using tcode: MB1C
Error while creating stock using tcode: MB1C
The Error is: Check table T004F:entry G006 does not existHi ,
Please check the FSV (field status variant) for your company code in OBY6 .
then go to transaction code OB14 --> enter the FSV --> Check if field status group G006(Material account) is maintained there or not.
if not please maintain it.
Thanks & Regards
Anshu -
Getting error while creating subsite using custom template in sharepoint2013
Hi,
I am getting the following error while creating subsite using custom template in sharpoint2013. even publish features are enabled.
Please suggest me on this.
Thanks in advance.You need to enable the PerformancePoint Service Site Collection Features(PPSMonDatasourceCtype)
on the target site collection. go to site action > site settings> site collections features > and enable it and now try again.
Similar case: http://imughal.wordpress.com/2012/09/20/dependency-feature-ppsmondatasourcectype-id-05891451-f0c4-4d4e-81b1-0dabd840bad4-for-feature-bicenterdataconnections-id-3d8210e9-1e89-4f12-98ef-643995339ed4-is-not-activated-at-this-scop/
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog -
Hi All,
I am getting below error while creating an SR from the backend using API 'CS_ServiceRequest_PUB'.
Error:
API Programming Error (CS_ServiceRequest_PUB.Create_ServiceRequest): An error occurred when validating the descriptive flexfield.
Additional information:Program error: Please inform your support representative that:
FLEXFIELDS SERVER-SIDE VALIDATION package reports error:
validate_desccols() exception: ORA-20005: DVLB.get_default_context() failed. SQLERRM: ORA-01403: no data found
ORA-06512: at "APPS.FND_FLEX_DESCVAL", line 931
ORA-01403: no data found
Error: ORA-06502: PL/SQL: numeric or value error: character string buffer too small
I have intialised the context as below while running the stand alone procedure in SQL Developer.
Fnd_Global.apps_initialize (user_id => 1368347,
resp_id => 21739
resp_appl_id => 514 );
We are on 11.5.10.2 and database version is 9i.
Can you please help??
TIA,
SHi Kesava,
I notice that in the package you used the application user_name=CHUNDUK calls the API pa_project_pub.create_project.
I wonder if you used chunduk as database user to execute the package Or you used APPS to execute the package?
The APi document states that it is a requirement to create a db username as the same name with the application username.
I have been running the problem to execute API 's delete project and try to figure what could be my problem.
TIA -
Getting no data found error while CSV download
Hi,
I have a report generated from the PL/SQL returning the query and I enabled the CSV Download option. But, when I try downloading the report contents using CSV download option, the excel sheet contains message "no data found". I enabled sorting and sum on few columns. Is it anywhere related to CSV download? Any solution would be really helpful..
Thanks,
PrabhakarThanks for the help!! yep, it is indeed the wrong session state value. In the report, I was modifying the value to display the report, hence when CSV download is given, it was taking wrong session state value. So, giving "no data found" error. Probably, this may help some people.
Regards,
Prabhakar -
I am getting ORA-01403: no data found error while calling a stored procedur
Hi, I have a stored procedure. When I execute it from Toad it is successfull.
But when I call that from my java function it gives me ORA-01403: no data found error -
My code is like this -
SELECT COUNT(*) INTO L_N_CNT FROM TLSI_SI_MAST WHERE UPPER(CUST_CD) =UPPER(R_V_CUST_CD) AND
UPPER(ACCT_CD)=UPPER(R_V_ACCT_CD) AND UPPER(CNSGE_CD)=UPPER(R_V_CNSGE_CD) AND
UPPER(FINALDEST_CD)=UPPER(R_V_FINALDEST_CD) AND UPPER(TPT_TYPE)=UPPER(R_V_TPT_TYPE);
IF L_N_CNT >0 THEN
DBMS_OUTPUT.PUT_LINE('ERROR -DUPlicate SI-1');
SP_SEL_ERR_MSG(5,R_V_ERROR_MSG);
RETURN;
ELSE
DBMS_OUTPUT.PUT_LINE('BEFORE-INSERT');
INSERT INTO TLSI_SI_MAST
( CUST_CD, ACCT_CD, CNSGE_CD, FINALDEST_CD, TPT_TYPE,
ACCT_NM, CUST_NM,CNSGE_NM, CNSGE_ADDR1, CNSGE_ADDR2,CNSGE_ADDR3,
CNSGE_ADDR4, CNSGE_ATTN, EFFECTIVE_DT, MAINT_DT,
POD_CD, DELVY_PL_CD, TRANSSHIP,PARTSHIPMT, FREIGHT,
PREPAID_BY, COLLECT_BY, BL_REMARK1, BL_REMARK2,
MCC_IND, NOMINATION, NOTIFY_P1_NM,NOTIFY_P1_ATTN , NOTIFY_P1_ADDR1,
NOTIFY_P1_ADDR2, NOTIFY_P1_ADDR3, NOTIFY_P1_ADDR4,NOTIFY_P2_NM,NOTIFY_P2_ATTN ,
NOTIFY_P2_ADDR1,NOTIFY_P2_ADDR2, NOTIFY_P2_ADDR3, NOTIFY_P2_ADDR4,
NOTIFY_P3_NM,NOTIFY_P3_ATTN , NOTIFY_P3_ADDR1,NOTIFY_P3_ADDR2, NOTIFY_P3_ADDR3,
NOTIFY_P3_ADDR4,CREATION_DT, ACCT_ATTN, SCC_IND, CREAT_BY, MAINT_BY
VALUES( R_V_CUST_CD,R_V_ACCT_CD,R_V_CNSGE_CD,R_V_FINALDEST_CD,R_V_TPT_TYPE,
R_V_ACCT_NM,R_V_CUST_NM ,R_V_CNSGE_NM, R_V_CNSGE_ADDR1,R_V_CNSGE_ADDR2, R_V_CNSGE_ADDR3,
R_V_CNSGE_ADDR4,R_V_CNSGE_ATTN, R_V_EFFECTIVE_DT ,SYSDATE, R_V_POD_CD,R_V_DELVY_PL_CD,R_V_TRANSSHIP ,R_V_PARTSHIPMT , R_V_FREIGHT,
R_V_PREPAID_BY ,R_V_COLLECT_BY ,R_V_BL_REMARK1 ,R_V_BL_REMARK2,R_V_MCC_IND,
R_V_NOMINATION,R_V_NOTIFY_P1_NM, R_V_NOTIFY_P1_ATTN, R_V_NOTIFY_P1_ADD1, R_V_NOTIFY_P1_ADD2,
R_V_NOTIFY_P1_ADD3, R_V_NOTIFY_P1_ADD4, R_V_NOTIFY_P2_NM, R_V_NOTIFY_P2_ATTN, R_V_NOTIFY_P2_ADD1,
R_V_NOTIFY_P2_ADD2, R_V_NOTIFY_P2_ADD3, R_V_NOTIFY_P2_ADD4, R_V_NOTIFY_P3_NM, R_V_NOTIFY_P3_ATTN,
R_V_NOTIFY_P3_ADD1, R_V_NOTIFY_P3_ADD2, R_V_NOTIFY_P3_ADD3, R_V_NOTIFY_P3_ADD4,
SYSDATE,R_V_ACCT_ATTN,R_V_SCC_IND,R_V_USER_ID,R_V_USER_ID
DBMS_OUTPUT.PUT_LINE(' SI - REC -INSERTED');
END IF;Hi,
I think there is a part of the stored procedure you did not displayed in your post. I think your issue is probably due to a parsed value from java. For example when calling a procedure from java and the data type from java is different than expected by the procedure the ORA-01403 could be encountered. Can you please show the exact construction of the call of the procedure from within java and also how the procedure possible is provided with an input parameter.
Regards, Gerwin -
No Functional Area Found Error while creating service data in me22n
Hello,
While creating service data for a purchase order in ME22n I am getting error like " No functional area found" .
Please tell me how to maintain the Functional area for a particular GL account
In the help i can found that we can find the functional area "The functional area can be determined either using the cost element, the account assignment object (such as the cost center or order)"
How we can determine this please through some light on this statement.
Thanks
Pradeep
Moderator message: not directly related to ABAP development, please post again in the appropriate functional forum.
locked by: Thomas Zloch on Oct 15, 2010 9:55 AMHello Madhav,
You have to maintain your 'business transaction profile' (SPRO->CRM->IC Web->Business Transaction->Define bus. trans. prof.) in the customizing and assign that profile to your IC WebClient profile (the one you assigned in the org. model)
In the business transaction profile you must make sure that at least one transaction type (e.g. ZSRV) is assigned as 'Dependent business transaction' and that entry is flagged as 'Service'.
Also make sure that that transaction type (ZSRV) has leading business transaction category 'Service process' (BUS2000116).
This should solve your problem!
Kind regards,
Joost -
SAP Design Studio ODBC Driver Not Found error while creating HANA connection.
Hi,
While creating SAP HANA ODBC connection in Design Studio via Tools > Preference > Application Design > Backend Connection. I am getting error ODBC Driver Not Found. Error screen shot is attached.
My Design Studio version is 1.3 win 32 bit
My OS Win 7 64 bit
I have installed both HANA client 32 bit and 64 bit.
I have tried creating DSN ODBC connection via "C:\Windows\SysWOW64\odbcad32.exe" and via Control Panel > Administrative tools > Data Sources(ODBC). But it does not detect it either.
I am not sure what needs to change to let Design Studio know which HANA client driver to use.
Please help!.Hi Rohit,
This seems to be a known bug with Design Studio. Please see the SAP Note below on this.
1774480 - Fix launching of ODBC Data Source Administrator
Regards,
Abhijit -
Error while creating Routing using LSMW
Hi Guys ,
I am trying to create LSMW using Direct Input Method .
My structures are ::
RC271_DS Work center structure for direct input (for datasets)
RC27M_DS Material master view DIRECT INPUT routing for datasets
PLKO_DI_DS Header structure for direct input (for datasets)
PLPO_DI_DS Routing/item structure for direct input (for datasets.
I getting correct data from multiple flat files .
It's converting the data also .
But while executing start direct input method i am getting the followig error ....
You cannot edit the task list object with activity type
Please let me know problem guys .
Regards,
RajHi Naveen,
It means you have to assign the task list type to material type ZPRD. Then it will carry its job:
The path is:
Go To-> SPRO-> IMG Activity-> Production-> Basic Data-> Routing-> General Data---> Define Material Type Assignments. T-Code: OP50
I hope it will work.
Regards,
Madhu.G -
Error while creating BOM using BAPI 'BAPI_BOM_UPLOAD_SAVE'
Hi All,
We are getting an error as 'Data is incomplete' while trying to create BoM using the bapi 'BAPI_BOM_UPLOAD_SAVE', if the item contains Item category as 'T'. But for other item category like 'L' or 'N', the bapi is sucessfull.
The values that we pass to fill the item category 'T' are operation, item_cat, bom_itm_no, COMPON_QTY, FIXED_QTY as 'X', UNMEAS as 'ST', ITEM_TEXT1 and ITEM_TEXT2.
Anyone who has faced same problem or has a solution to the problem, kindly provide a solution.
Regards,
VijayThe error you receive is because of different config for different Item Categories. Find out from the functional team what fields have they kept mandatory for the item category 'T'. You may not be passing one of those fields in the BAPI.
Try creating a BOM manually for item category 'T' and you may figure our which field you are missing. -
Error while creating BOM using BAPI (urgent)
Hi all,
Thanks for ur help. i am getting some error while creting a BOM using that BAPI
BAPI_MATERIAL_BOM_GROUP_CREATE.
errors are
1) Error/warning when checking the structure of the BOM group with ID =
2)Alternative does not exist for material assignment to material BAPIBOMFG1
is it mandatory to pass the bom group id to this bapi?
In bomgroup structure , i am not passing anything to BOM_GROUP field.
is it mandatory to pass this data? i am giving my coding below.plz suggest , where i am making mistake. it is urgent.
regards
pabitra
report z_bom_create
line-size 132
line-count 65
no standard page heading.
*-- DATA DECLARATION--
include <icon> .
*---Tables
tables : s076, t100, marc .
*---Types
types : begin of t_upload, " Upload file data
col1(18),
col2(10),
col3(30),
col4(12),
col5(50),
end of t_upload,
begin of t_split,
location like stpu-ebort,
end of t_split.
data:begin of i_return occurs 10.
include structure bapiret2.
data:end of i_return.
types:begin of t_item."occurs 10.
include structure BAPI1080_ITM_C.
types:end of t_item.
types:begin of t_subitem." occurs 10.
include structure BAPI1080_SUI_C.
types:end of t_subitem.
types:begin of t_header." occurs 10.
include structure BAPI1080_MBM_C.
types:end of t_header.
types:begin of t_bomgroup." occurs 10.
include structure BAPI1080_BGR_C.
types:end of t_bomgroup.
types:begin of t_variant." occurs 10.
include structure BAPI1080_BOM_C.
types:end of t_variant.
*--- Tables
data: i_upload type standard table of t_upload, " to hold data
i_upload1 type standard table of t_upload,
i_split type standard table of t_split,
i_item type standard table of t_item,
i_subitem type standard table of t_subitem,
i_header type standard table of t_header,
i_bomgroup type standard table of t_bomgroup,
i_variant type standard table of t_variant.
data: wa_upload type t_upload, " to hold file data,
wa_upload1 type t_upload, " to hold plan data,
wa_split type t_split,
wa_item type t_item,
wa_subitem type t_subitem,
wa_header type t_header,
wa_bomgroup type t_bomgroup,
wa_variant type t_variant.
data:v_matnr like mara-matnr,
v_start like sy-index,
v_count(3) type c.
*--Constants
data: c_dot type c value '.',
c_x type c value 'X',
c_comma type c value ','.
-------Selection Screen Design -
*Selection screen for input of upload file address
selection-screen skip 2.
selection-screen begin of block blk1 with frame.
parameters : p_file like rlgrap-filename obligatory .
parameters : p_matnr like mara-matnr obligatory,
p_werks like marc-werks obligatory memory id wrk,
p_stlan like afko-stlan obligatory default '1' .
selection-screen end of block blk1.
---AT SELECTION SCREEN -
at selection-screen on value-request for p_file.
*--For popup to select file.
perform f_give_help.
at selection-screen on p_matnr.
perform f_check_matnr.
-----START OF SELECTION -
*--Data upload using WS_Upload.
perform f_get_data.
perform f_get_bom_data.
perform f_get_bom_data1.
perform f_call_bapi.
*& Form f_give_help
text
--> p1 text
<-- p2 text
FORM f_give_help.
call function 'WS_FILENAME_GET'
exporting
mask = ',.,..'
mode = 'O'
importing
filename = p_file
exceptions
inv_winsys = 1
no_batch = 2
selection_cancel = 3
selection_error = 4
others = 5.
if sy-subrc <> 0 and not sy-msgty is initial.
message id sy-msgid type sy-msgty number sy-msgno
with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
ENDFORM. " f_give_help
*& Form f_check_matnr
text
--> p1 text
<-- p2 text
FORM f_check_matnr.
CALL FUNCTION 'BAPI_MAT_BOM_EXISTENCE_CHECK'
EXPORTING
MATERIAL = p_matnr
PLANT = p_werks
BOMUSAGE = '1'
VALID_FROM_DATE =
VALID_TO_DATE =
TABLES
RETURN = i_return.
ENDFORM. " f_check_matnr
*& Form f_get_data
text
--> p1 text
<-- p2 text
FORM f_get_data.
call function 'WS_UPLOAD'
exporting
CODEPAGE = ' '
filename = p_file
filetype = 'DAT'
tables
data_tab = i_upload
exceptions
conversion_error = 1
file_open_error = 2
file_read_error = 3
invalid_type = 4
no_batch = 5
unknown_error = 6
invalid_table_width = 7
gui_refuse_filetransfer = 8
customer_error = 9
others = 10
if sy-subrc <> 0.
message id sy-msgid type sy-msgty number sy-msgno
with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
ENDFORM. " f_get_data
*& Form f_get_bom_data
text
--> p1 text
<-- p2 text
FORM f_get_bom_data.
delete i_upload where col1 is initial.
delete i_upload where col1 cs 'ITEM'.
read table i_upload into wa_upload with key col1 = 'FINISHED GOOD:'.
if sy-subrc = 0.
v_matnr = wa_upload-col2.
if v_matnr <> p_matnr.
message e001(zl) with p_matnr.
endif.
else.
message e000(zl).
endif.
ENDFORM. " f_get_bom_data
*& Form f_get_bom_data1
text
--> p1 text
<-- p2 text
FORM f_get_bom_data1.
loop at i_upload into wa_upload where col1 CS 'FINISHED GOOD'.
v_start = sy-tabix + 1.
loop at i_upload into wa_upload1 from v_start .
if wa_upload1-col1 cs 'FINISHED GOOD'.
exit.
else.
perform f_split_upload_data.
endif.
endloop.
endloop.
ENDFORM. " f_get_bom_data1
*& Form f_split_upload_data
text
--> p1 text
<-- p2 text
FORM f_split_upload_data.
if not wa_upload1-col5 is initial.
if wa_upload1-col5 cs c_comma.
split wa_upload1-col5 at c_comma into table i_split.
loop at i_split into wa_split.
v_count = v_count + 1.
endloop.
if wa_upload1-col4 <> v_count.
wa_upload1-col4 = v_count.
endif.
clear wa_upload1-col5.
clear wa_split.
loop at i_split into wa_split.
wa_upload1-col5 = wa_split-location.
append wa_upload1 to i_upload1.
endloop.
else.
append wa_upload1 to i_upload1.
endif.
else.
append wa_upload1 to i_upload1.
endif.
ENDFORM. " f_split_upload_data
*& Form f_call_bapi
text
--> p1 text
<-- p2 text
FORM f_call_bapi.
clear wa_upload1.
wa_header-material = p_matnr.
wa_header-plant = p_werks.
wa_header-bom_usage = p_stlan.
append wa_header to i_header.
wa_bomgroup-bom_usage = p_stlan.
wa_bomgroup-created_in_plant = p_werks.
append wa_bomgroup to i_bomgroup.
wa_variant-alternative_bom = 1.
wa_variant-base_qty = 1.
wa_variant-valid_from_date = sy-datum.
append wa_variant to i_variant.
loop at i_upload1 into wa_upload1.
wa_item-item_no = wa_upload1-col1.
wa_item-item_cat = wa_upload1-col2.
wa_item-component = wa_upload1-col3.
wa_item-comp_qty = wa_upload1-col4.
append wa_item to i_item.
wa_subitem-subitem_qty = '1'.
wa_subitem-installation_point = wa_upload1-col5.
append wa_subitem to i_subitem.
endloop.
CALL FUNCTION 'BAPI_MATERIAL_BOM_GROUP_CREATE'
EXPORTING
TESTRUN = ' '
ALL_ERROR = ' '
TABLES
BOMGROUP = i_bomgroup
VARIANTS = i_variant
ITEMS = i_item
SUBITEMS = i_subitem
MATERIALRELATIONS = i_header
ITEMASSIGNMENTS =
SUBITEMASSIGNMENTS =
TEXTS =
RETURN = i_return.
if i_return[] is initial.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'.
*write: /'BOM created:', stpo-stlnr.
else.
*if not i_return[] is initial.
loop at i_return.
IF i_return-TYPE = 'E'.
errmsg-type = i_return-type.
errmsg-line = i_return-message.
append errmsg.
ULINE /1(108).
write:/ icon_led_RED as icon, i_return-MESSAGE.
ULINE /1(108).
ENDIF.
IF i_return-TYPE = 'W'.
errmsg-type = i_return-type.
errmsg-line = i_return-message.
append errmsg.
ULINE /1(108).
write:/ icon_led_YELLOW as icon, i_return-MESSAGE.
ULINE /1(108).
ENDIF.
ENDLOOP.
*write: / i_return-id, i_return-number, i_return-message(80).
*endloop.
*write: /'Error'.
endif.
ENDFORM. " f_call_bapiHi shashi,
Thanks for ur help.i tried after passing the group but it is giving same error.
i am getting the error
"Error/warning when checking the structure of the BOM group with ID= test"
i am gettig the above error when i put bomgroup-bom_group_identification = 'TEST'.
whatever i am putting in this field, the same error is comming having different value.
if i put--- bomgroup-bom_group_identification = ' '. then i will get error
"Error/warning when checking the structure of the BOM group with ID=
if i omit that field, then also , i am getting same error.
plz suggest what r the fields i need to pass for BOMGROUP structure for that bapi?
regards
pabitra -
Error while creating PO using monitor shopping cart
Hi all,
We are facing one issue while creating the PO in SRM using the monitor shopping cart node. The system is throwing an error message stating that u201CEnter Tax Codeu201D because of this we are not able to proceed further. Can anyone knows why this error message is showing. I debugged the code but I couldnu2019t find out from where this message is triggering. Which BADI / FM is called up at this point giving this error message..?
Any point on this will highly appreciated .
Thanks in Advance .
Regards,
Mahesh Mohan DHi Mahesh
Does your business has practice to enter a tax details in basic data of sc since this below configuration brings the tax settings in shopping for all type of shopping carts
SPRO>Supplier Relationship Management>SRM Server>Cross-Application Basic Settings>Tax Calculation-->Determine System for Tax Calculation - What is the existing settings?
if it so the basic data , you can find tax details otherwise not.
if there is a setting like no tax determination, you need to check the given vendor data whether ERS is flaged or not.
since ERS flag equires tax data.
regards
Muthu -
Not enough memory for Data Provider-Error while creating Data Source
Hi,
I am loading data into Master Data_Attribute InfoObject I am getting following error message while creating Data Source under "Proposal" Tab
"Not enough memory for Data Provider"
My Master Data InfoObject having 65 attributes
My CSV file having 15,00000 records
I am using BI 7.0 version
If anybody faced this problem. Please share with me
Thanks.Hi
Here the problem with the space so plz contact ur BASIS people to increase the spae for particular object. -
Error while creating Salesorder using BAPI
hello frnds,
I m new to abap and tryin to make use of BAPI_SALESORDER_CREATEFROMDAT1 to create Sales Order
I have used the progrtam below.
*& Report ZSALESBAPITRIAL
REPORT zsalesbapitrial.
TABLES : vbak , vbap.
Parameter Screen.
Sales Document Type.
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
Sales document type.
PARAMETERS: p_auart TYPE vbak-auart OBLIGATORY.
Sales Organisation.
PARAMETERS: p_vkorg TYPE vbak-vkorg OBLIGATORY.
Distribution channel.
PARAMETERS: p_vtweg TYPE vbak-vtweg OBLIGATORY.
Division.
PARAMETERS: p_spart TYPE vbak-spart OBLIGATORY.
SKIP 1.
Sold to.
PARAMETERS: p_sold TYPE vbak-kunnr OBLIGATORY.
Ship to.
PARAMETERS: p_ship TYPE vbak-kunnr OBLIGATORY.
SKIP 1.
Material(Article No).
PARAMETERS: p_matnr TYPE vbap-matnr OBLIGATORY.
Quantity (Cummulative quantity of sales Order)
PARAMETERS: p_menge type vbap-kwmeng obligatory.
Plant(Site )
parameters: p_plant type vbap-werks obligatory.
SELECTION-SCREEN END OF BLOCK b1.
Data declarations.
DATA: v_vbeln LIKE vbak-vbeln.
DATA: header LIKE bapisdhead1.
DATA: headerx LIKE bapisdhead1x.
DATA: item LIKE bapisditem OCCURS 0 WITH HEADER LINE.
DATA: itemx LIKE bapisditemx OCCURS 0 WITH HEADER LINE.
DATA: partner LIKE bapipartnr OCCURS 0 WITH HEADER LINE.
DATA: return LIKE bapiret2 OCCURS 0 WITH HEADER LINE.
DATA: lt_schedules_inx TYPE STANDARD TABLE OF bapischdlx
WITH HEADER LINE.
DATA: lt_schedules_in TYPE STANDARD TABLE OF bapischdl
WITH HEADER LINE.
Header data
Sales document type
header-doc_type = p_auart.
headerx-doc_type = 'X'.
Sales organization
header-sales_org = p_vkorg.
headerx-sales_org = 'X'.
Distribution channel
header-distr_chan = p_vtweg.
headerx-distr_chan = 'X'.
Division
header-division = p_spart.
headerx-division = 'X'.
headerx-updateflag = 'I'.
Partner data
Sold to
partner-partn_role = 'AG'.
partner-partn_numb = p_sold.
APPEND partner.
Ship to
partner-partn_role = 'WE'.
partner-partn_numb = p_ship.
APPEND partner.
ITEM DATA
itemx-updateflag = 'I'.
Line item number.
item-itm_number = '000010'.
itemx-itm_number = 'X'.
Material
item-material = p_matnr.
itemx-material = 'X'.
Plant
item-plant = p_plant.
itemx-plant = 'X'.
Quantity
item-target_qty = p_menge.
itemx-target_qty = 'X'.
APPEND item.
APPEND itemx.
Fill schedule lines
lt_schedules_in-itm_number = '000010'.
lt_schedules_in-sched_line = '0001'.
lt_schedules_in-req_qty = p_menge.
APPEND lt_schedules_in.
Fill schedule line flags
lt_schedules_inx-itm_number = '000010'.
lt_schedules_inx-sched_line = '0001'.
lt_schedules_inx-updateflag = 'X'.
lt_schedules_inx-req_qty = 'X'.
APPEND lt_schedules_inx.
CALL FUNCTION 'BAPI_SALESDOCU_CREATEFROMDATA1'
EXPORTING
sales_header_in = header
sales_header_inx = headerx
IMPORTING
salesdocument_ex = v_vbeln
TABLES
return = return
sales_items_in = item
sales_items_inx = itemx
sales_schedules_in = lt_schedules_in
sales_schedules_inx = lt_schedules_inx
sales_partners = partner.
Check the return table.
LOOP AT return WHERE type = 'E' OR type = 'A'.
EXIT.
ENDLOOP.
IF sy-subrc = 0.
WRITE: / 'Error in creating document'.
ELSE.
WRITE: / 'Document ', v_vbeln, ' created'.
ENDIF.
but its giving 'Error in creating document' I m unable to figure wat i m missing . Is it tht i m gving wrong parameters.
Please help !!!Does tht mean i need to add the following code
Line item number.
item-itm_number = '000010'.
itemx-itm_number = 'X'.
Material
item-material = p_matnr.
itemx-material = 'X'.
Plant
item-plant = p_plant.
itemx-plant = 'X'.
Quantity
item-target_qty = p_menge.
itemx-target_qty = 'X'.
APPEND item.
APPEND itemx.
For second item.
Line item number.
item-itm_number = '000020'.
itemx-itm_number = 'X'.
Material
item-material = '600020001'.
itemx-material = 'X'.
Plant
item-plant = p_plant.
itemx-plant = 'X'.
Quantity
item-target_qty = p_menge.
itemx-target_qty = 'X'.
APPEND item.
APPEND itemx.
Fill schedule lines
lt_schedules_in-itm_number = '000010'.
lt_schedules_in-sched_line = '0001'.
lt_schedules_in-req_qty = p_menge.
APPEND lt_schedules_in.
Fill schedule lines
lt_schedules_in-itm_number = '000020'.
lt_schedules_in-sched_line = '0002'.
lt_schedules_in-req_qty = p_menge.
APPEND lt_schedules_in.
Fill schedule line flags
lt_schedules_inx-itm_number = '000010'.
lt_schedules_inx-sched_line = '0001'.
lt_schedules_inx-updateflag = 'X'.
lt_schedules_inx-req_qty = 'X'.
APPEND lt_schedules_inx.
Fill schedule line flags
lt_schedules_inx-itm_number = '000020'.
lt_schedules_inx-sched_line = '0002'.
lt_schedules_inx-updateflag = 'X'.
lt_schedules_inx-req_qty = 'X'.
APPEND lt_schedules_inx.
But i guess it is overwritting my frst material..
Also i m gettin a error
For object rv_beleg, number range interval doesnot exist
Pls suggest -
Error while creating Resource using GDS
Hi
Iam trying to create Resource using GDS and it is throwing me error
clresource: (C189917) VALIDATE on resource egateq00-haegate_reg-res, resource group egateq00-rg, exited with non-zero exit status.
clresource: (C720144) Validation of resource egateq00-haegate_reg-res in resource group egateq00-rg on node uhegateq02 failed.
clresource: (C891200) Failed to create resource "egateq00-haegate_reg-res".
This is the command I executed
rclresource create -g egateq00-rg -t SUNW.gds
-p Scalable=false -p Start_timeout=120 -p Stop_timeout=120 -p Probe_timeout=30
-p Port_list="23001/tcp" -p Start_command="/egateq00/scripts/reg_START.sh" -p Stop_command="/egateq00/scripts/reg_STOP.sh"
-p Probe_command="/egateq00/scripts/reg_PROBE.sh" -p Child_mon_level=1 -p Network_resources_used=egateq00-lh-res -p Failover_enabled=FALSE
-p Stop_signal=15 egateq00-haegate_reg-res
The log under /var/cluster/logs/DS says following
07/01/2008 17:56:43 uhegateq02 START-INFO> scha_resource_open failed [14]. Keeping the old Log_level value
07/01/2008 17:56:43 uhegateq02 START-ERROR> Cannot access the start command </egateq00/scripts/reg_START.sh> : <No such file or directory>
07/01/2008 18:13:23 uhegateq02 START-INFO> scha_resource_open failed [14]. Keeping the old Log_level value
07/01/2008 18:13:23 uhegateq02 START-ERROR> Cannot access the start command </egateq00/scripts/reg_START.sh> : <No such file or directory>
However, I can open these scripts and run it from anywhere. I also tested these scripts and they all work fine. They are all set to chmod 777 , so everyone should have execute permission
Iam not returning any return value from these Start and Stop script , is that the why it is failing
thanksHi
I disabled the PMF as described on the http://blogs.sun.com/TF/entry/disabling_pmf_action_script_with. This is what I did
1>Added following line in the top of my Start script
while getopts 'R:G:' opt
do
case "${opt}" in
R) RESOURCE=${OPTARG};;
G) RESOURCEGROUP=${OPTARG};;
esac
done
sleep 60 &
/usr/cluster/bin/pmfadm -s ${RESOURCEGROUP},${RESOURCE},0.svc
2>While creating the resource , I used property for Start_command="/egateq00/scripts/reg_START.sh -R %RS_NAME -G %RG_NAME"
Now , after doing this , My RG is not getting lost. Also , in the message file I do not see the errors of "Start script failed to stay UP"
However, My Application is not started either.
This is what the message file says
Jul 3 16:43:32 uhegateq01 Cluster.RGM.rgmd: [ID 515159 daemon.notice] method <gds_validate> completed successfully for resource <egateq00-haegat
e-reg-res>, resource group <egateq00-rg>, node <uhegateq01>, time used: 0% of timeout <300 seconds>
Jul 3 16:43:32 uhegateq01 Cluster.CCR: [ID 973933 daemon.notice] resource egateq00-haegate-reg-res added.
Jul 3 16:43:32 uhegateq01 Cluster.RGM.rgmd: [ID 224900 daemon.notice] launching method <gds_svc_start> for resource <egateq00-haegate-reg-res>,
resource group <egateq00-rg>, node <uhegateq01>, timeout <120> seconds
Jul 3 16:43:32 uhegateq01 Cluster.RGM.rgmd: [ID 252072 daemon.notice] 50 fe_rpc_command: cmd_type(enum):<1>:cmd=</opt/SUNWscgds/bin/gds_svc_star
t>:tag=<egateq00-rg.egateq00-haegate-reg-res.0>: Calling security_clnt_connect(..., host=<uhegateq01>, sec_type {0:WEAK, 1:STRONG, 2:DES} =<1>, .
Jul 3 16:43:35 uhegateq01 Cluster.RGM.rgmd: [ID 515159 daemon.notice] method <gds_svc_start> completed successfully for resource <egateq00-haega
te-reg-res>, resource group <egateq00-rg>, node <uhegateq01>, time used: 2% of timeout <120 seconds>
Jul 3 16:43:35 uhegateq01 Cluster.RGM.rgmd: [ID 224900 daemon.notice] launching method <gds_monitor_start> for resource <egateq00-haegate-reg-re
s>, resource group <egateq00-rg>, node <uhegateq01>, timeout <300> seconds
Jul 3 16:43:35 uhegateq01 Cluster.RGM.rgmd: [ID 252072 daemon.notice] 50 fe_rpc_command: cmd_type(enum):<1>:cmd=</opt/SUNWscgds/bin/gds_monitor_
start>:tag=<egateq00-rg.egateq00-haegate-reg-res.7>: Calling security_clnt_connect(..., host=<uhegateq01>, sec_type {0:WEAK, 1:STRONG, 2:DES} =<1
, ...)Jul 3 16:43:35 uhegateq01 Cluster.RGM.rgmd: [ID 515159 daemon.notice] method <gds_monitor_start> completed successfully for resource <egateq00-h
aegate-reg-res>, resource group <egateq00-rg>, node <uhegateq01>, time used: 0% of timeout <300 seconds>
4>Also , in the /var/cluster/logs/DS , I see the Start script started succesfully
07/03/2008 16:43:32 uhegateq01 START-INFO> Start succeeded. [egateq00/scripts/reg_START.sh -R egateq00-haegate-reg-res -G egateq00-rg]
5>Also , in the /var/cluster/logs/DS , I see the Probe script returning 0 , but this is wierd because it should return Non zero number. When I run the Probe script from the command line , it is returning me non zero value when the application is down
07/03/2008 16:43:35 uhegateq01 PROBE-INFO> The GDS monitor (gds_probe) has been started
07/03/2008 16:44:35 uhegateq01 PROBE-INFO> Probe has been executed with exit code 0 [egateq00/scripts/reg_PROBE.sh]
07/03/2008 16:44:35 uhegateq01 PROBE-INFO> The probe result is 0
07/03/2008 16:45:35 uhegateq01 PROBE-INFO> Probe has been executed with exit code 0 [egateq00/scripts/reg_PROBE.sh]
07/03/2008 16:45:35 uhegateq01 PROBE-INFO> The probe result is 0
07/03/2008 16:46:35 uhegateq01 PROBE-INFO> Probe has been executed with exit code 0 [egateq00/scripts/reg_PROBE.sh]
07/03/2008 16:46:35 uhegateq01 PROBE-INFO> The probe result is 0
07/03/2008 16:47:35 uhegateq01 PROBE-INFO> Probe has been executed with exit code 0 [egateq00/scripts/reg_PROBE.sh]
07/03/2008 16:47:35 uhegateq01 PROBE-INFO> The probe result is 0
07/03/2008 16:48:35 uhegateq01 PROBE-INFO> Probe has been executed with exit code 0 [egateq00/scripts/reg_PROBE.sh]
07/03/2008 16:48:35 uhegateq01 PROBE-INFO> The probe result is 0
07/03/2008 16:49:35 uhegateq01 PROBE-INFO> Probe has been executed with exit code 0 [egateq00/scripts/reg_PROBE.sh]
07/03/2008 16:49:35 uhegateq01 PROBE-INFO> The probe result is 0
07/03/2008 16:50:35 uhegateq01 PROBE-INFO> Probe has been executed with exit code 0 [egateq00/scripts/reg_PROBE.sh]
07/03/2008 16:50:35 uhegateq01 PROBE-INFO> The probe result is 0
07/03/2008 16:51:35 uhegateq01 PROBE-INFO> Probe has been executed with exit code 0 [egateq00/scripts/reg_PROBE.sh]
07/03/2008 16:51:35 uhegateq01 PROBE-INFO> The probe result is 0
07/03/2008 16:52:35 uhegateq01 PROBE-INFO> Probe has been executed with exit code 0 [egateq00/scripts/reg_PROBE.sh]
07/03/2008 16:52:35 uhegateq01 PROBE-INFO> The probe result is 0
07/03/2008 16:53:35 uhegateq01 PROBE-INFO> Probe has been executed with exit code 0 [egateq00/scripts/reg_PROBE.sh]
07/03/2008 16:53:35 uhegateq01 PROBE-INFO> The probe result is 0
07/03/2008 16:54:35 uhegateq01 PROBE-INFO> Probe has been executed with exit code 0 [egateq00/scripts/reg_PROBE.sh]
07/03/2008 16:54:35 uhegateq01 PROBE-INFO> The probe result is 0
07/03/2008 16:55:35 uhegateq01 PROBE-INFO> Probe has been executed with exit code 0 [egateq00/scripts/reg_PROBE.sh]
07/03/2008 16:55:35 uhegateq01 PROBE-INFO> The probe result is 0
07/03/2008 16:56:35 uhegateq01 PROBE-INFO> Probe has been executed with exit code 0 [egateq00/scripts/reg_PROBE.sh]
07/03/2008 16:56:35 uhegateq01 PROBE-INFO> The probe result is 0
Maybe you are looking for
-
IPhoto crashes after upgrading to '11
Just upgraded to iPhoto '11 and it will not open. Crashes every time. I tried to rebuild libraries by holding down option Comand when opening but that didnt even appear when i tried that and just crashed again. Opened Disk Utility and repaired disk p
-
How do I fix my iPod I updated it to iOS 6 and now iTunes and the App Store will not work?, How do I fix my iPod I updated it to iOS 6 and now iTunes and the App Store will not work?
-
Display formatted code in html output
Howdy, I'm looking for preferably a JSTL tag (library) that is capable of transforming a code fragment into neatly formatted code, with syntax highlighting, tab preservation, line numbers, stuff like that. I'm sure they should be out there somewhere,
-
Ipod 5 won't sync with iTunes, says it needs to be restored to factory settings.
Two error messages pop up when I plug it in. 1) iTunes cannot read the contents of the iPod "Katie's iPod touch". Go to the Summary tab in iPod preferences and click Restore to restore this iPod to factory settings. 2) The software required for commu
-
SFTP Issue in SOA 10.1.3.3
Hi, I am trying to make a connection ftp stp server using BPEL and it is throwing below error. .. Can any one please help me on this .. We have made all required configuration for this .. ORABPEL-12511 Adapter Framework unable to create outbound JCA