No Data from SRM - using 0BBP_TD_INV_1

Hello All,
I am trying to extract data with 0BBP_TD_INV_1 data source from SRM into BW.
I see that one of the base tables - CRMD_ORDERADM_H has more than 1000 records, but when I try "extractor checker" I get "0" records.
Does anyone has any inputs with this extraction?
My untimate aim is to populate OBBP_PO, OBBP_INV, OBBP_CON and then OBBP_DS1 and finally OBBP_C01 so that I can create reports on Global Spend. I have already popultaed OBBP_PO and OBBP_SC.
I promise to award points.
Thanks for your time.
Pramod.

Did you give any selection condition while trying with RSA3.
Check whether the data source is active or not. If not activate the same by going to RSA5.

Similar Messages

Function Module to send Vendor Master Data from SRM to ECC

Hi Guys
I heard there is a function module in SRM which can send Vendor Master Data from SRM to ECC please confirm for me if there is such a function Module and what is it called. Thanks

Hi,
Vendor Master data is replicated to SRM from ECC. Standard Transactions (BBPGETVD,..) will be used to replicate the data from ECC.
Vendor Master will exists in ECC, so there is no point in sending the same back from SRM to ECC. If the requirement is the other way around, we can use the transaction BBPGETVD in SRM system.
Hope this helps.
Regards,
Hemanth

Price Information data from SRm to MDM

Hello,
I m working on SRM-MDM Catalog 2 scenario.
I have imported lookup table data in MDM using MDMGX transaction.
But i couldnt get data for Price Lookup Qualified Table.
Can anybody please tell me how should i send Price Information data from SRM?
Thanks,
Maheshwari

Hi,
By MDMGX, you replicate only the lookup table data.if you want to see which kind of look uptable data it replicate, you can refer the FS Guide/Config Guide of SRM-MDM.
when you replicate the main table data from SRm to MDM via XI then you will get all those info related to price in the Qualified lookup table.
Hope this will help you.
TNR,
saurabh...

Transfer of Product Master and Contract data from SRM server to CAT

Hi,
We are using XI system to send product master data from SRM system to CAT (catalogue authorising tool) wherein both the SRM and the CAT add-on have been installed on the same web application server.
On the SRM-> XI part, we are going to use ABAP client proxy. My question is can we use ABAP server proxy to send data from XI to CAT ? In other words, is CAT a part of ABAP system so that we can use proxy ??
I am new to SAP environment and hence this question.
Regards
Ramesh

Hello Ramesh,
for uploading SRM master data to CCM u need not do any developements in ABAP , u have to just import SAP predefined SWCV's in Integration repository and configure required scenario "MasterDataInclusionInCatalogOnWAS" for u r corresponding WAS version.
U can download configuration document from service marketplace named " Configuration Fact Book CCM 2.0 "
Regards,
Keith

Master data from SRM to MM

Hi Gurus,
Is it possible t transfer master data from SRM to MM? If it is possible, can you please explain me how can we do it??
Regards,
Eswar

Hi
You can transfer the master data
Vendor Data - By first transfering the payment terms and quality terms by using
Report: UPLOAD_PAYMENT_TERMS
Report: BBP_UPLOAD_QM_SYSTYEMS - for quality sytems
then
by transaction BBPGETVD for all the vendors data from the back end
Material Master Data by CRM Middlewear for the material master data of The process of material master data tranfer is simple and effective but you set the Adpater setting for the EBP side and Plug-In settings at R/3 side.
If you still have any questions let me know

Retrieving MDM catalog data from SRM

Currently we have a requirement to pull MDM catalog data from SRM with supplier product number as input.
We have a remote function call which has input fields u2018Catalog idu2019 and u2018Catalog itemu2019 to retrieve the catalog details from MDM.
However we could not able to find the relation ( say database table) between the supplier product number and catalog id/catalog item in SRM.
Is there any other RFC/APIu2019s to meet this requirement or to find relation between supplier product number and catalog id/catalog item in SRM itself?
Kindly provide your suggestions and throw light on how to progress on this requirement.
Thanks.
Regards
K Arasu

Hi,
The field NEW_ITEM-MANUFACTMAT[n] is used to capture manufacturer part number/supplier part number and is mapped as such automatically in the SRM BO coding.
Regards,
Jason

How to delete a single data from table using control file

I want delete a single row data from table using sql loder control file
Edited by: 977940 on Dec 19, 2012 9:00 PM

977940 wrote:
I want delete a single row data from table using sql loder control file
Edited by: 977940 on Dec 19, 2012 9:00 PMWhy?
And how do you imagine this happening with sqlloader?
The entire purpose of sqlloader is to load data (hence, the name sql*loader*) into a table from an external source. If you want to delete rows from a table, you use the sql DELETE statement.
What is the business problem you are trying to solve?

Is there any way to export IT Resource data from OIM using the export tool?

Hello,
we are trying to migrate an OIM development environment to a preproduction environment and we need to migrate more than 400 IT Resources. We have exported some IT Resources and when we imported them in the preproduction environment their data was not migrated. Is there any way to export IT Resource data from OIM using the export tool? Or is there any other way to do this without doing it by hand?
Thank you for your help
Kind Regards

Well , OIM doesnot provide any such facility to export ITResource data along with ITResource .
Directly updating the DB could be an option ..
Thanks

Problem with uploading data from excel using BDC for tcode f-02

Hi All,
I am uploading data from excel using BDC for tcode f-02. The problem here is, while recording, the values of some fields are recording twice. I dont know why it's happening so. But if I run my abap program, I have to give those fields twice in my excel sheet. Otherwise data does not upload. But it is not the feasible way. We must give those fields once in excel. Please tell me, how I can solve the issue.
With regards,
Rosaline.

Hi,
in BDC each and every action is recording. If your press enter in same screen that also recorded once aging may be this is your case repeating field values will appear. we can solve the problem for repeat fields like below.
suppose in your excel having repeated field X1 X2 X3 the X2 contains repeated field X3 means delete the X3 field.
Now In your itab having X1 and X2 fields. While in the LOOP the ITAB pass the X2 field to repeated the fields.
LOOP at ITAB to WA.
CLEAR bdcdata_wa.
bdcdata_wa-fnam = 'BDC_CURSOR'.
bdcdata_wa-fval = 'RM08M-EBELN'.
APPEND bdcdata_wa TO bdcdata_tab.
CLEAR bdcdata_wa.
bdcdata_wa-fnam = 'INVFO-BLDAT'.
bdcdata_wa-fval = wa-X2." 1st time pass the X2 fields
APPEND bdcdata_wa TO bdcdata_tab.
CLEAR bdcdata_wa.
bdcdata_wa-fnam = 'INVFO-BLDAT'.
bdcdata_wa-fval = wa-X2." pass the same value to repeated field
APPEND bdcdata_wa TO bdcdata_tab.
Endloop.
Hope you can understand.
Regards,
Dhina..

Read data from SharePoint using ABAP sql command

We need to read data from a SharePoint site and update the sap object services with the information. There is a lot of information on how to put data into Sharepoint from SAP, but we need to get data from SharePoint and put it into SAP. Is it possible to retrieve data from SharePoint using sql command in ABAP program? If it is possible, what do we need to do to have SAP recognize where to get the SharePoint data?
Richard Newman

Hi Newman,
You can use native sql in your abap code to read data from SharePoint's database. But I would suggest you to generate a SharePoint webservice which can provide you the neccessary data so that you can consume this webservice in ABAP
(Will be quite faster than native sql).
Regards,
Ozcan.

Purchase order Confirmation data from SRM to MM

Hi,
I am trying to send Purchase order Confirmation data from SRM to MM via PI. In SRM portal i am able to see that the data has been send successfully. But i am not able to receive any data in PI nor iam able to any messages going from SRM in SXMB_MONI.
Please help me.
Thanks & Regards
Kasturika Phukan

Hi,
In SRM check in sxmb_moni is there any queue is blocked.
If not then,
Check your proxy settings.Select Go To and check connection Test.
Go to sm59 and check H type RFC destination is maintained.
Go to sxmb_adm check the Global setting value,
Application system,dest://RFC destination is maintained.
In XI,
Go to SLD.
Check Technical system (client with logical system) maintained.
Check Business System maintained with role of application system,Related integration engine
maintained.
Regards,
Prakasu.M

Transferring Product Data from SRM 7.0 to SRM-MDM 3.0

Dear SRM-MDM experts,
We are running the program BBP_CCM_TRANSFER_CATALOG to transfer product data from SRM 7 to SRM-MDM 3.0 The question we have is after running the program, where do we find the file the XML file which the program has generated so we can see the results? SLG1 just shows how many products were processed. We need to see the list of the products generated.
Thanks and regards
Pedzi

Hi Pedzi,
You can find the generated XML file in MDM server. Here is the path to get the Product Data XML file.
C:/usr/sap/SRD\MDS00/mdm/distributions/MDD_ORCL/REPOSITORYNAME/Inbound/SRM/_MDMProductDataTransmission/Archive
Thanks,
Anshuk Saxena

Question regarding Polling data from database using DB Adapters in BPEL

Hi,
I have the following question regarding Polling data from database using DB Adapters in BPEL -
If I am selecting data from multiple tables/view to ultimately generate hierarchical xml document, is there a way that I specify polling all of these tables/views. Is polling limited only to one table/view?
Thanks
Ravi

Hi Ravi,
your question seems to have been answered for the question of polling a set of tables with one as the root, and getting back a hierarchical xml representing multiple related tables.
However you can also poll for changes to both the root table and its related tables. Not sure if this was your question or the one already answered. If the former please check out the sample
bpel/samples/tutorials/122.DBAdapter/advanced/polling/PollingForChildUpdates
Thanks
Steve

Extracting Data from Essbase using ODI fails with: Cannot calculate file.

I'm try to Extract Data from Essbase using ODI KM (LKM Hyperion Essbase DATA to SQL). I'm using
CalcScript for EXRACTION_QUERY_TYPE. CalcScript in my case resides on Essbase App directory, so I
just specify the name (i.e. FULLEXP) for EXTRACTION_QUERY_FILE. Before creating ODI interface
I ran CalcScript successfully from EAS. Also, ODI and Essbase are on different servers. ODI Agent
is not running on Essbase Server, but ODI Agent has access to file generated by CalcScript.
EPM Fusion Version 11.1.2.2. Essbase running in LINUX and ODI 11g running on Windows Server.
Created the ODI interface where source is my Planning Cube and target is a relational table using SYNOPSIS
MEMORY Engine for staging area. I make it thru the following ODI interface steps OK:
1 - Loading - SrcSet0 - Drop work table
2 - Loading - SrcSet0 - Create work table
3 - Loading - SrcSet0 - Begin Essbase Data Extract.
I then fail at:
4 - Loading - SrcSet0 - Extract Data
I get the following Message in ODI Operators console.
org.apache.bsf.BSFException: exception from Jython:
Traceback (most recent call last):
File "<string>", line 1, in <module>
     at com.hyperion.odi.essbase.ODIEssbaseDataReader.getAppData(Unknown Source)
     at com.hyperion.odi.essbase.AbstractEssbaseReader.extract(Unknown Source)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
com.hyperion.odi.essbase.ODIEssbaseException: com.hyperion.odi.essbase.ODIEssbaseException: Cannot calculate file. Essbase Error(1013131): Failed to start Asynchronous thread
     at org.apache.bsf.engines.jython.JythonEngine.exec(JythonEngine.java:146)
     at com.sunopsis.dwg.codeinterpretor.SnpScriptingInterpretor.execInBSFEngine(SnpScriptingInterpretor.java:346)
     at com.sunopsis.dwg.codeinterpretor.SnpScriptingInterpretor.exec(SnpScriptingInterpretor.java:170)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.scripting(SnpSessTaskSql.java:2458)
     at oracle.odi.runtime.agent.execution.cmd.ScriptingExecutor.execute(ScriptingExecutor.java:48)
     at oracle.odi.runtime.agent.execution.cmd.ScriptingExecutor.execute(ScriptingExecutor.java:1)
     at oracle.odi.runtime.agent.execution.TaskExecutionHandler.handleTask(TaskExecutionHandler.java:50)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.processTask(SnpSessTaskSql.java:2906)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java:2609)
     at com.sunopsis.dwg.dbobj.SnpSessStep.treatAttachedTasks(SnpSessStep.java:540)
     at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java:453)
     at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java:1740)
     at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$2.doAction(StartSessRequestProcessor.java:338)
     at oracle.odi.core.persistence.dwgobject.DwgObjectTemplate.execute(DwgObjectTemplate.java:214)
     at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.doProcessStartSessTask(StartSessRequestProcessor.java:272)
     at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.access$0(StartSessRequestProcessor.java:263)
     at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$StartSessTask.doExecute(StartSessRequestProcessor.java:822)
     at oracle.odi.runtime.agent.processor.task.AgentTask.execute(AgentTask.java:123)
     at oracle.odi.runtime.agent.support.DefaultAgentTaskExecutor$2.run(DefaultAgentTaskExecutor.java:83)
     at java.lang.Thread.run(Thread.java:662)

I'm try to Extract Data from Essbase using ODI KM (LKM Hyperion Essbase DATA to SQL). I'm using
CalcScript for EXRACTION_QUERY_TYPE. CalcScript in my case resides on Essbase App directory, so I
just specify the name (i.e. FULLEXP) for EXTRACTION_QUERY_FILE. Before creating ODI interface
I ran CalcScript successfully from EAS. Also, ODI and Essbase are on different servers. ODI Agent
is not running on Essbase Server, but ODI Agent has access to file generated by CalcScript.
EPM Fusion Version 11.1.2.2. Essbase running in LINUX and ODI 11g running on Windows Server.
Created the ODI interface where source is my Planning Cube and target is a relational table using SYNOPSIS
MEMORY Engine for staging area. I make it thru the following ODI interface steps OK:
1 - Loading - SrcSet0 - Drop work table
2 - Loading - SrcSet0 - Create work table
3 - Loading - SrcSet0 - Begin Essbase Data Extract.
I then fail at:
4 - Loading - SrcSet0 - Extract Data
I get the following Message in ODI Operators console.
org.apache.bsf.BSFException: exception from Jython:
Traceback (most recent call last):
File "<string>", line 1, in <module>
     at com.hyperion.odi.essbase.ODIEssbaseDataReader.getAppData(Unknown Source)
     at com.hyperion.odi.essbase.AbstractEssbaseReader.extract(Unknown Source)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
com.hyperion.odi.essbase.ODIEssbaseException: com.hyperion.odi.essbase.ODIEssbaseException: Cannot calculate file. Essbase Error(1013131): Failed to start Asynchronous thread
     at org.apache.bsf.engines.jython.JythonEngine.exec(JythonEngine.java:146)
     at com.sunopsis.dwg.codeinterpretor.SnpScriptingInterpretor.execInBSFEngine(SnpScriptingInterpretor.java:346)
     at com.sunopsis.dwg.codeinterpretor.SnpScriptingInterpretor.exec(SnpScriptingInterpretor.java:170)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.scripting(SnpSessTaskSql.java:2458)
     at oracle.odi.runtime.agent.execution.cmd.ScriptingExecutor.execute(ScriptingExecutor.java:48)
     at oracle.odi.runtime.agent.execution.cmd.ScriptingExecutor.execute(ScriptingExecutor.java:1)
     at oracle.odi.runtime.agent.execution.TaskExecutionHandler.handleTask(TaskExecutionHandler.java:50)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.processTask(SnpSessTaskSql.java:2906)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java:2609)
     at com.sunopsis.dwg.dbobj.SnpSessStep.treatAttachedTasks(SnpSessStep.java:540)
     at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java:453)
     at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java:1740)
     at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$2.doAction(StartSessRequestProcessor.java:338)
     at oracle.odi.core.persistence.dwgobject.DwgObjectTemplate.execute(DwgObjectTemplate.java:214)
     at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.doProcessStartSessTask(StartSessRequestProcessor.java:272)
     at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.access$0(StartSessRequestProcessor.java:263)
     at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$StartSessTask.doExecute(StartSessRequestProcessor.java:822)
     at oracle.odi.runtime.agent.processor.task.AgentTask.execute(AgentTask.java:123)
     at oracle.odi.runtime.agent.support.DefaultAgentTaskExecutor$2.run(DefaultAgentTaskExecutor.java:83)
     at java.lang.Thread.run(Thread.java:662)

BW 7.3 ,can we extract delta data from mutiproviders using OHD

Hi Gurus,
My requirement is to extract the delta data from multiple infocube (more than one IC) using open hub destination to third party system. We thought of implementing BW 7.3 so that we can extract delta data from multiproviders instead of cubes to open hub destination...
My question is:
1.Is that possible to extract delta data from multiproviders using open hub destination.
2.Is there any limitations?
3.list of possible known issues from BW7.3 .
Please suggest your valuble experience..
Thanks in advance
Vaish

Hi Vaish,
Yes you are right. In 7.3 we can extract data from MultiProviders using DTP.
This is the new functionality in 7.3
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/304444f7-e02d-2d10-9c97-d5e3ecf09882?QuickLink=index&overridelayout=true
check the 18th slide in the above PDF
Regards,
Venkatesh

No Data from SRM - using 0BBP_TD_INV_1

Similar Messages

Maybe you are looking for