No data in 0FI_GL_1 and 0FI_GL_6
Dear All,
Any pre setting is requir,
i am not getting data in rsa3 for datasource 0FI_GL_1
and 0FI_GL_6 in r/3.
please provide me your inputs.
we are in BI 7.
May be the functional team is not using Old Totals Table GLTO . ( Non Delta Capable 0FI_GL_1 & Delta Capable 0FI_GL_6 )
Check out data for datasource 0FI_GL_10 - > FAGLFLEXT - New Totals Table .
Also, communicate with Functional Folks abt the line items as well.
May be the functional team is not using Old Line ItemsTable BSEG/BKPF .
FAGLFLEXA - New Totals Table
You have create a custom datasource for line items basing on FAGLFLEXA.
Similar Messages
-
Extraction Procedure for DataSource 0FI_GL_1 and 0FI_GL_2 for BW
Hi Gurus,
I was just wondering if there is any special extraction procedure if i want to use DataSources 0FI_GL_1 and 0FI_GL_2. I have already activated the datasources in an Old R/3 version 4.6b and have done all the mapping and loading. My only concern is the scheduled loading of the data. How do I deal with the changes because I 've read in a couple of White Papers that these specific datasources have No Delta Extraction. Will I have a scheduled deletion of data and have a full load everytime i want to load the new data? Any help will be most appreciated. Thank you in advance.
- KitHi,
0FI_GL_1 and 0FI_GL_2 support only Full loads. To delete the previous request you can schedule it in the Process Chain delete request variant.
SAP has provided Delta enabled DataSources for these. 0FI_GL_6 instead of 0FI_GL_1 and 0FI_GL_7 instead of 0FI_GL_2.
[0FI_GL_6|http://help.sap.com/saphelp_nw70/helpdata/en/0a/558cabb2e19a4db3097b81bba4fd0e/frameset.htm]
[0FI_GL_7|http://help.sap.com/saphelp_nw70/helpdata/en/78/fc168f3955754c8bf1474870138a53/frameset.htm]
Hope this helps.
Regards,
Gaurav -
MB5B Report for Date Wise Stock and Value
Hi,
I am Taking MB5B Report for Date Wise Stock and Value.
But I have one doubt all stocks is coming or not in these report like Unrestrected Stock,Return Stock.Blocked stock,Transist stock,Restrected Stock,qty Inspection Stock.
I have another Doubt in these report three Stock type indicaters are there like these.
1.Storage Location / Batch Stock
2.valuated Stock
3.Special Stock.
But i have one doubt what is defferent these
1.Storage Location / Batch Stock
2.valuated StockHi Prasad,
Yes MB5B report consider the Unrestricted, Quality, Blocked, Transit stock and restricted stock. Not sure about Return Stock.
If you select the Storage location/Batch stock radio button then the system will display all the possible stock from the storage location and the corresponding batch also.
If you select Valuated stock radio button then system will show only the valuated stock not the Non-valuated stock. Because Non-valuated material type is available in SAP system will not show those stock suppose if you select the Valuated stock radio button.
Regards
Karthick -
Hi Experts
Please..Please update me on in detail if possible with example ......Key Fields and Dimensions
How Data Records will be processed in DSO and Cube
I tried to search but i can't able to find what i am looking for
My Requirment:
I am extracting Employee Benefits records from Non SAP Source System (Oracle Tables)
In the Oracle there is no Date field avaliable and there won't be any history avaliable in oracle once the Benefits of an employee is changed the old record will be overwritten to new one so they can't track the employee benefits history...but in BW i need to store/show history of employee benefits by Cal day
Oracle Table Fields
Location (Primary Key)
Emp No (Primary Key)
Insurance Type
Call Allowance Type
Annual Leave (No of day Days)
Pension Schem
Company Laptop (Yes/No)hi,
key fields are the primary keys of ur ods tables. based on the key field values the data fields will get overwritten.
suppose if the key fields values were same then the data fields will get overwritten. but the changes were captured in the change log table, hence the history of changes is available.
Dimensions- are the prmary keys of cube. but in cube only addition of records will happen as default not overwrite as in ods.
dimension ids were generated based on the sid values of characteristics.
maximum of 16 key fields and dimensions can be there in ods and cube respectively.
for ur case, include 0calday field in the key fields and use the routine to update the field with system date(SY-Date). this keeps track/ else without date also , change log maintains history for each load.
have to add 0recordmode to the communication structure of the ods(infosource).
Ramesh -
since doing the 7.0.4 update i notice that my mobile data has doubled and i am running out of data mid month. I've disabled apps s not many running. Any suggestions?
I am having the same issue even with the newer 7.1. I have a 1-100 KB data push on both my husdand's and my phone every hour on the hour (i.e. my will be at :23 of the hour and his will be at :13 of the hour and it will change). This is whether we are on a WIFI and with all apps, background refreshes, push notifications, etc turned OFF.
-
Approval data of SC and PO in SRM 7.0
Hi experts,
we use SRM 7.0 with BRF workflow. I need the approval data of SC and PO for such view in Mail:
Approvingstep Status Approver GID Approver
purchaser approved John Alex z00000001
approver approved Tom Morgan z00000002
etc.
I attempted to use FM BBP_PDH_WFL_APPROVER_GET, but it was futile.
Can you please give me an advice for this?
Regards,
Evgeny.Solved by me
-
Fetch data from table and generate attachment than mail it.
Hello Experts,
From couple of day I am searching on Google for a better database procedure that will help me to get data from tables and generate attachment and mail it but i fail.
My Scenario is:
I have a query that will fetch almost 5000 records from database tables. Each record has almost 75 characters
select a.location_code,
a.item_code,
b.description item_desc,
to_char(a.manufact_date,'ddMonyy')mfg,
to_char((a.manufact_date + nvl(b.expiry_period,0)),'ddMonyy')expr,
to_char((a.manufact_date + nvl(b.qurantine_period,0)),'ddMonyy')qrtn,
round(nvl (b.qurantine_period, 0) - (sysdate - a.manufact_date)) days_elapsed,
a.closing_balance_posted quantity
from wms_stock_current_balance_v a, wms_item_setup_mast b
where a.closing_balance > 0
and a.item_code = b.item_code
and a.loc_type in ('RACKING','PICKING','QUICKA','BUNDLED')
and nvl(b.qurantine_period,0) > 0
and round(nvl (b.qurantine_period, 0) - (sysdate - a.manufact_date)) <= 0
order by a.item_code, a.location_code;
Sample data of above query is
LOCATION_CODE
ITEM_CODE
ITEM_DESC
MFG
Expiry
Quarantine
Days Elapse
Quantity
13DL2
000000000000000F0487
CLEAR COOL BLACK 05ML
20-Feb-10
31-Mar-14
4-Jun-13
-122
160
14DL0
000000000000000F0487
CLEAR COOL BLACK 05ML
23-Feb-10
3-Apr-14
7-Jun-13
-119
134
14DL2
000000000000000F0487
CLEAR COOL BLACK 05ML
23-Feb-10
3-Apr-14
7-Jun-13
-119
160
14DR2
000000000000000F0487
CLEAR COOL BLACK 05ML
23-Feb-10
3-Apr-14
7-Jun-13
-119
20
14LL2
000000000000000F0487
CLEAR COOL BLACK 05ML
20-Feb-10
31-Mar-14
4-Jun-13
-122
160
17ER2
000000000000000F0487
CLEAR COOL BLACK 05ML
20-Feb-10
31-Mar-14
4-Jun-13
-122
160
17GL2
000000000000000F0487
CLEAR COOL BLACK 05ML
20-Feb-10
31-Mar-14
4-Jun-13
-122
160
17SL0
000000000000000F0487
CLEAR COOL BLACK 05ML
17-Feb-10
28-Mar-14
1-Jun-13
-125
64
18QL0
000000000000000F0487
CLEAR COOL BLACK 05ML
23-Feb-10
3-Apr-14
7-Jun-13
-119
160
19AR5
000000000000000F0487
CLEAR COOL BLACK 05ML
17-Feb-10
28-Mar-14
1-Jun-13
-125
160
19DL1
000000000000000F0487
CLEAR COOL BLACK 05ML
20-Feb-10
31-Mar-14
4-Jun-13
-122
160
19JR0
000000000000000F0487
CLEAR COOL BLACK 05ML
17-Feb-10
28-Mar-14
1-Jun-13
-125
60
19TL1
000000000000000F0487
CLEAR COOL BLACK 05ML
20-Feb-10
31-Mar-14
4-Jun-13
-122
160
20GR2
000000000000000F0487
CLEAR COOL BLACK 05ML
20-Feb-10
31-Mar-14
4-Jun-13
-122
40
36FL3
000000000000000F0487
CLEAR COOL BLACK 05ML
18-Feb-10
29-Mar-14
2-Jun-13
-124
65
19UR0
000000000000000F0591
COMFORT WHITE 24ML*300
28-Oct-09
28-Oct-11
1-May-11
-887
1
12SL1
000000000000000F0593
COMFORT PINK 24ML*300
28-Oct-09
28-Oct-11
1-May-11
-887
42
12SR1
000000000000000F0593
COMFORT PINK 24ML*300
28-Oct-09
28-Oct-11
1-May-11
-887
42
14OR1
000000000000000F0593
COMFORT PINK 24ML*300
28-Oct-09
28-Oct-11
1-May-11
-887
8
36EL4
000000000000000F0594
CLEAR HF DECRASE 5M*360
14-Feb-10
14-Feb-11
12-Oct-10
-1088
14
13VL1
000000000000000F0595
CLEAR COM SFT CRE 5*360
8-Feb-10
8-Feb-11
6-Oct-10
-1094
160
14ER0
000000000000000F0595
CLEAR COM SFT CRE 5*360
8-Feb-10
8-Feb-11
6-Oct-10
-1094
105
Database Info
Oracle 10g
Version 10.2.0.1.0Look at the sample code for generating a CSV file that I've just posted in response to a similar question:
Re: How to execute a proc and spool files in a database job
And the use the search button in this forum to find sample code for sending a CLOB as a plain/text e-mail attachment using UTL_SMTP. -
How to retrieve multiple data from table and represent it in jsp page
Hi
The below JavaScript code is used to add row in the table when I want to add multiple row data into table for single entry no field.
<html> function addRow()
i++;
var newRow = document.all("tblGrid").insertRow();
var oCell = newRow.insertCell();
oCell.innerHTML = "<input name='srno"+i+"' type='text' id='srno"+i+"' size=10>";
oCell = newRow.insertCell();
oCell.innerHTML = "<input name='itmcd"+i+"' type='text' id='itmcd"+i+"' size='10'>";
oCell = newRow.insertCell();
oCell.innerHTML = "<input name='itmnm"+i+"' type='text' id='itmnm"+i+"' size='15'>";
oCell = newRow.insertCell();
oCell.innerHTML = "<input name='indentqty"+i+"' type='text' id='indentqty"+i+"' size='10'>";
oCell = newRow.insertCell();
oCell.innerHTML = "<input name='uom"+i+"' type='text' id='uom"+i+"' size='10'><input type='hidden' name='mcode"+i+"'id='mcode"+i+"'>";
oCell = newRow.insertCell();
oCell.innerHTML = "<input name='packqty"+i+"' type='text' id='packqty"+i+"' size='10'>";
oCell = newRow.insertCell();
oCell.innerHTML = "<input name='packuom"+i+"' type='text' id='packuom"+i+"' size='10'><input type='hidden' name='pack"+i+"' id='pack"+i+"'>";
oCell = newRow.insertCell();
oCell.innerHTML = "<input name='rate"+i+"' type='text' id='rate"+i+"' size='10'>";
oCell = newRow.insertCell();
oCell.innerHTML = "<input name='dor"+i+"' type='text' id='dor"+i+"' size='0' onClick='"+putdate(this.name)+"'>";
oCell = newRow.insertCell();
oCell.innerHTML = "<input name='bccode"+i+"' type='text' id='bccode"+i+"' size='10'></td><input type='hidden' name='bcc"+i+"' id='bcc"+i+"'>";
oCell = newRow.insertCell();
oCell.innerHTML = "<input name='cccode"+i+"' type='text' id='cccode"+i+"' size='10'></td><input type='hidden' name='ccc"+i+"' id='ccc"+i+"'>";
oCell = newRow.insertCell();
oCell.innerHTML = "<input name='remark2"+i+"' type='text' id='remark2"+i+"' size='20'>";
oCell = newRow.insertCell();
oCell.innerHTML = "<input type='button' value='Delete' onclick='removeRow(this);' />";
// oCell = newRow.insertCell();
// oCell.innerHTML = "<input type='button' value='Clear' onclick='clearRow(this);' />";
}<html> Then this data are send to the next Servlet for adding into two table.
My header portion data are added into one table which added only one row in table. while footer section data are added into the no of rows in another table dependent on No. of
Rows added into jsp page.
Here is an code for that logic.
<html>
ArrayList<String> mucode = new ArrayList<String>();
ArrayList<Integer> serials = new ArrayList<Integer>();
ArrayList<Integer> apxrate = new ArrayList<Integer>();
ArrayList<Integer> srname = new ArrayList<Integer>();
ArrayList<String> itcode = new ArrayList<String>();
ArrayList<String> itname = new ArrayList<String>();
ArrayList<Integer> iqnty = new ArrayList<Integer>();
ArrayList<String> iuom = new ArrayList<String>();
ArrayList<Integer> pqnty = new ArrayList<Integer>();
ArrayList<String> puom1 = new ArrayList<String>();
ArrayList<Integer> arate = new ArrayList<Integer>();
ArrayList<String> rdate = new ArrayList<String>();
ArrayList<String> bcs = new ArrayList<String>();
ArrayList<String> ccs = new ArrayList<String>();
ArrayList<String> remarkss = new ArrayList<String>();
//ArrayList<Integer> qtyrecs = new ArrayList<Integer>();
//ArrayList<String> dors = new ArrayList<String>();
//ArrayList<String> remarks = new ArrayList<String>();
String entryn = request.getParameter("entryno");
String rows = request.getParameter("rows");
out.println(rows);
//String Entryno = request.getParameter("entryno");
// out.println(Entryno);
int entryno = 0,reqqty = 0,srno = 0,deprequest = 0,rowcount = 0;
if(!Entryno.equals("")){
entryno = Integer.valueOf(Entryno);
if(!rows.equals("")){
rowcount = Integer.valueOf(rows);
for(int i=1;i<=rowcount;i++){
if(request.getParameter("srno"+i)!=null){
serials.add(Integer.valueOf(request.getParameter("srno"+i).trim()));
out.println(serials.size());
for(int i=1;i<=rowcount;i++){
if(request.getParameter("srno"+i)!=null){
srname.add(Integer.valueOf(request.getParameter("srno"+i).trim()));
out.println(srname.get(0));
for(int i=1;i<=rowcount;i++){
if(request.getParameter("itmcd"+i)!=null){
itcode.add(request.getParameter("itmcd"+i).trim());
} //out.println(itcode.get(i));
for(int i=1;i<=rowcount;i++){
if(request.getParameter("itmnm"+i)!=null){
itname.add(request.getParameter("itmnm"+i).trim());
}//out.println(itname.get(i));
for(int i=1;i<=rowcount;i++){
if(request.getParameter("indentqty"+i)!=null){
iqnty.add(Integer.valueOf(request.getParameter("indentqty"+i).trim()));
for(int i=1;i<=rowcount;i++){
if(request.getParameter("uom"+i)!=null){
iuom.add(request.getParameter("uom"+i).trim());
}//out.println(iuom.get(i));
for(int i=1;i<=rowcount;i++){
if(request.getParameter("mcode"+i)!=null){
mucode.add(request.getParameter("mcode"+i).trim());
for(int i=1;i<=rowcount;i++){
if(request.getParameter("packqty"+i).equals("")){
pqnty.add(0);
}else
pqnty.add(Integer.valueOf(request.getParameter("packqty"+i).trim()));
for(int i=1;i<=rowcount;i++){
if(request.getParameter("pack"+i)!=null){
puom1.add(request.getParameter("pack"+i).trim());
}else
puom1.add("");
for(int i=1;i<=rowcount;i++){
if(request.getParameter("rate"+i).equals("")){
arate.add(0);
}else
arate.add(Integer.valueOf(request.getParameter("rate"+i).trim()));
/* for(int i=1;i<=rowcount;i++){
if(request.getParameter("rate"+i)!=null){
arate.add(Integer.valueOf(request.getParameter("rate"+i).trim()));
for(int i=1;i<=rowcount;i++){
if(request.getParameter("dor"+i)!=null){
try{
rdate.add(dashdate.format(slashdate.parse(request.getParameter("dor"+i).trim())));
}catch(ParseException p){p.printStackTrace();}
}else
{ rdate.add("");}
for(int i=1;i<=rowcount;i++){
if(request.getParameter("bcc"+i)!=null){
bcs.add(request.getParameter("bcc"+i).trim());
}out.println(bcs.get(0));
for(int i=1;i<=rowcount;i++){
if(request.getParameter("ccc"+i)!=null){
ccs.add(request.getParameter("ccc"+i).trim());
}out.println(ccs.get(0));
for(int i=1;i<=rowcount;i++){
out.println("remark2");
if(request.getParameter("remark2"+i)!=null){
remarkss.add(request.getParameter("remark2"+i).trim());
}out.println(remarkss.get(0));
ArrayList<String> Idate = new ArrayList<String>();
for(int i=1;i<=rowcount;i++){
if(request.getParameter("dateindent"+i)!=null){
try{
Idate.add(dashdate.format(dashdate.parse(request.getParameter("dateindent"+i).trim())));
}catch(ParseException p){p.printStackTrace();}
String Rdate = dashdate.format(new java.util.Date());
String tdate = dashdate.format(new java.util.Date());
// String Indentdate = dashdate.format(new java.util.Date());
// String ApprovedT1 = dashdate.format(new java.util.Date());
// String ApprovedT2 = dashdate.format(new java.util.Date());
// String ApprovedT1=" ";
//String ApprovedT2="";*/
String ApprovedT1= dashdate.format(new java.util.Date());
out.println (ApprovedT1);
String ApprovedT2=dashdate.format(new java.util.Date());
out.println(ApprovedT2);
String Indentdate=(dashdate.format(slashdate.parse(request.getParameter("dateindent").trim())));
out.println(Indentdate);
String Cocode ="BML001";
out.println(Cocode);
String Deptcode = request.getParameter("dept1");
out.println(Deptcode);
String Empcode = request.getParameter("emp");
out.println(Empcode);
String Refno =request.getParameter("rtype");
out.println(Refno);
String Divcode = request.getParameter("todiv1");
out.println(Divcode);
String Usercode = "CIRIUS";
String Whcode = request.getParameter("stor");
out.println(Whcode);
// String Itemgroupcode = request.getParameter("");
String Itemgroupcode ="120000";
out.println(Itemgroupcode);
String Supplytypecode = request.getParameter("stype");
out.println(Supplytypecode);
String Delcode = request.getParameter("deliverycode");
out.println(Delcode);
String Itemclass="WS";
out.println(Itemclass);
// String Itemclass = request.getParameter("iclass");
// out.println(Itemclass);
String unitcode = request.getParameter("uni");
out.println(unitcode);
String Todivcode = request.getParameter("todiv1");
out.println(Todivcode);
String Appxrate = request.getParameter("rate");
out.println(Appxrate);
String Srno = request.getParameter("srno");
out.println(Srno);
/* String Indqty = request.getParameter("indentqty");
out.println(Indqty);*/
String Itemcode = request.getParameter("itmcd");
out.println(Itemcode);
String Othersp = request.getParameter("remark1");
out.println(Othersp);
String Reqdt = request.getParameter("dor");
out.println(Reqdt);
String Munitcode = request.getParameter("mcode");
out.println(Munitcode);
String Packqty = request.getParameter("packqty");
out.println(Packqty);
String Packuom = request.getParameter("pack");
out.println(Packuom);
String Remark2 = request.getParameter("remark2");
out.println(Remark2);
String BC = request.getParameter("bcc");
out.println(BC);
String CC = request.getParameter("ccc");
out.println(CC);
try{
st=connection.createStatement();
connection.setAutoCommit(false);
String sql="INSERT INTO PTXNINDHDR(COCODE,DEPTCODE,EMPCODE,APPROVEDT1,APPROVEDT2,INDDT,ENTRYNO,REFNO,REMARKS,DIVCODE,USERCODE,WHCODE,ITEMGROUPCODE,SUPTYPECODE,DELCODE,UNITCODE,TODIVCODE,ITEMCLASS)VALUES('"+Cocode+"','"+Deptcode+"','"+Empcode+"','"+ApprovedT1+"','"+ApprovedT2+"','"+Indentdate+"',"+Entryno+",'"+Refno+"','"+Othersp+"','"+Divcode+"','"+Usercode+"','"+Whcode+"','"+Itemgroupcode+"','"+Supplytypecode+"','"+Delcode+"','"+unitcode+"','"+Todivcode+"','"+Itemclass+"')";
out.println(sql);
st.addBatch(sql);
for(int i=0;i<serials.size();i++){
out.println("Inside the Statement");
String query3="test query for u";
out.println(query3);
String queryx="Insert into PTXNINDDTL(APXRATE,ENTRYNO,BRKNO,INDQTY,ITEMCODE,OTHERSPFCS,MUNITCODE,PACKQTY,PACKUOM,REMARKS,DIMSUBGRPCODE,DIMCODE,REQDT)VALUES("+arate.get(i)+","+entryno+","+srname.get(i)+","+iqnty.get(i)+","+itcode.get(i)+",'"+Othersp+"','"+mucode.get(i)+"',"+pqnty.get(i)+",'"+puom1.get(i)+"','"+remarkss.get(i)+"','"+bcs.get(i)+"','"+ccs.get(i)+"','"+rdate.get(i)+"')";
out.println(queryx);
st.addBatch(queryx);
int[] result=st.executeBatch();
connection.commit();
for(int k=0;k<result.length;k++)
out.println("rows updated by "+(k+1)+"insert sta:"+result[k]+"");
catch(BatchUpdateException bue)
out.println("error1;"+bue+"");
catch(SQLException sql)
out.println("error2;"+sql+"");
catch(Exception l)
out.println("error3;"+l+"");
</html>
Now I looking for to retrieve this footer section data available in multiple rows from footer table and present it in jsp page .
I am finding difficulties in how to show this multiple row data for dynamic no of rows .i.e. variable no. of rows.
I have able to show the data in Header portions of page in this ways
here i am adding the part of code which shows the data from header part of table i.e from Header table
<html>
<h2 align="center"><b>Indent Preparation</b></h2>
<div align="left">
<table width="849" border="0" cellspacing="3" cellpadding="3" align="center">
<tr>
<td ><div align="left"><b>Indent No.</b></div></td>
<td ><label>
<input name="indentno" type="text" id="indentno" size="15" value="" /><input type="hidden" name="no" id="no">
</label></td>
<td ><div align="center"><strong>Indent Date</strong></div></td>
<td ><label>
<div align="center">
<input name="dateindent" type="text" id="dateindent"value="<%=date1%>"/><input type="hidden" name="no" id="no">
</div>
</label></td>
<td> </td>
<td><div align="right"><strong>Entry No.</strong></div></td>
<%if(oper!=null && oper.equals("view") && hdrcode!=null && hdrdetails!=null){%>
<td><input type="text" value="<%=hdrcode.get(3)%>" size="10"></td>
<%}else{%>
<td><input type="text" name="entryno" id="entryno" value="<%=entryNo%>"/></td>
<%}%>
<div align="right"></div>
</tr>
<tr>
<td><b>Division</b></td>
<%if(oper!=null && oper.equals("view") && hdrcode!=null && hdrdetails!=null){%>
<td><input type="text" value="<%=hdrdetails.get(9)%>" size="20"</td>
<td><input type="hidden" name="div1" id="div1" value='<%=hdrcode.get(10)%>'></td>
<%}else{%>
<td><input type="text" name="div" id="div" /></td>
<td><input type="hidden" name="div1" id="div1" /> </td>
<%}%>
<td> </td>
<td> </td>
<td><div align="right"><strong>Unit</strong></div></td>
<%if(oper!=null && oper.equals("view") && hdrcode!=null && hdrdetails!=null){%>
<td><input type="text" value="<%=hdrdetails.get(14)%>" size="20"</td>
<td><input type="hidden" name="uni" id="uni" value='<%=hdrcode.get(12)%>'></td>
<%}else{%>
<td><input type="text" name="unit" id="unit" /></td>
<td><input type="hidden" name="uni" id="uni" /> </td>
<%}%>
</tr>
<tr>
</html>
Any suggestion on any above works is highly appreciated.
Thanks and regards
harshalToo much code. It's also not well intented nor formatted. I don't see a question either or it got lost in that heap of unformatted code.
I will only answer the question in the thread's subject:
How to retrieve multiple data from table and represent it in jsp pageTo retrieve, make use of HttpServletRequest#getParameterValues() and/or #getParameter().
To display, make use of JSTL's c:forEach. -
Requirement to print data of first and second report of an ALV at once
Hi,
I have an interactive ALV report in which on double click of any of the record on first report, its details get displayed in second report. My requirement is to print all the data (of first and second report) at once.
Kindly tell me how can I achieve this functionality.
Regards,
Seema NahariaHi Seema,
Try with this FM 'REUSE_ALV_HIERARCHICAL_LIST_DISPLAY'.
Regards,
Sujatha B. -
Questions on Saving and mining data with Labview and DIAdem
Hi,
I am sampling two signals at 200k sampling rate. I am trying to save the data on harddisk and analyzing the data using DIAdem.
If I save the data using mesurement file format .tdm and .lvm, the file size will be about 4 Gigabytes for only 10 mins' acquisition. It is very slow to process it.
I used the software Clampex and pCLAMP(Axon Instruments) before. At the same 200k sampling rate and also acquiring two signals, these programs save the data as .atf format and the size is only 400 MB for 10 mins' acquisition.
I wonder if there is also a good way to handle this situation using Labview and DIAdem, and how to do it?Hi, Jonathan:
I tried the TDM binary file format. The file size is 800 MB per min acquisition and it will take a long time to just open these files. For my application, I have to take data for several hours. I am looking for a way to reduce the size of files.
Is there any other type of file format that can reduce the size significantly and can be handled easily? -
Outbound delivery date in June and customer invoice post in July,tax rate?
Hi Experts
tax rate (June)=22%
tax rate (july)=24%
issue is Outbound delivery date in June and customer invoice post in July,so sytem taking tax rate =24% instead of 22%.Because outbound delivery is happened in June.
Please let me know that,
1)how system picking tax rate on base like billing date or service render date or ...?
2)how to take tax rate (june)=22% in July posting.
regards
sachinTax Rate is picked based on the pricing date.
You need to check with your SD collegue to configure the pricing date to be equal to outbound delivery date to pick the outbound delivery date based tax rates.
Regards,
Gaurav -
How can i delete data in psa and how can i partation psa?
hi friends,
can i delete data from psa and how can i partation psa?
Thanking u
suneel.hi Suneel,
http://help.sap.com/saphelp_nw70/helpdata/en/7d/724d3caa70ea6fe10000000a114084/frameset.htm
Using partitioning, you can separate the dataset of a PSA table into several smaller, physically independent, and redundancy-free units. This separation can mean improved performance when you update data from the PSA. In the <b>Implementation Guide with SAP NetWeaver > Business Intelligence > Connections to Other Systems > Maintain Control Parameters for Data Transfer</b> you define the number of data records needed to create a new partition. Only data records from a complete request are stored in a partition. The specified value is a threshold value.
transaction SPRO to go implementation guide
at database level
http://help.sap.com/saphelp_nw70/helpdata/en/33/dc2038aa3bcd23e10000009b38f8cf/frameset.htm
If you are using this database you can also partition PSA tables. You first have to activate this function using RSADMIN parameter DB4_PSA_PARTITIONING = 'X'. SAP Note 815186 includes more comprehensive information on this.
hope this helps. -
How can i update data in okc_k_items and csi_item_instances tables?
by EBS .
Thanks.For csi_item_instances table, you can use the following API:
CSI_ITEM_INSTANCE_PUB.UPDATE_ITEM_INSTANCE
For okc_k_items, try using the following API:
OKC_CONTRACT_ITEM_PUB.UPDATE_CONTRACT_ITEM
Hope this helps! -
Can I use one infosource to update data to CUBE and ODS???
Hi all,
Can anyone tell me if I can load data to OSD and Cube from one the same InfoSource? As I know, I have to have "0recordmode"(update mode) in communication structure for ODS not for Cube. So how can ODS and Cube use the same Infosucre to update data?
Thank youJohn,
Depending on the volume of data and the type of infosource, sometime one update to ODS first and then subsequently update to the Cube or update both cube and ODS in parallel.
For example, if you use AR or AP line item datasources, since you are extracting from both open line and closed line items tables, there could be multiple records for the same thing coming through. First when it appears as an open line item, and when it is paid, it appears again as a paid line item so if you update directly to the cube, you can have multiples of the real value. Thus in this instance you update from infosource to ODS then subsequently use delta update from ODS to cube. CCA and C0-PA on delta mode are example where there are no overlapping, thus you can update both ODS and Cube at the same time.
Hope this helps,
Mary -
I just got an iPhone 5 32GB and i have backed up my old 3GS 32GB via itunes (20GB of data on there) and it is taking a very long time to restore to my iPhone5. Its taken more than 20 hours and didnt complete.
The text "Time remaining ... hours" flickers.
I set it to start restoring from the 3GS backup yesterday at 1pm and the time remaining kept on increasing. I left it overnight and at 9am this morning the progress bar hadnt moved and it said 12 hours remaining.
I don't know why its taking so long. I unplugged it and it just set up as new phone. So i did a factory reset and tried again at 4pm and it is now 12am and it says 4 hours remaining and my computer occasionally flickers. (Its not a bad computer, 2 months old, i7, 6GB RAM, Heaps of HDD space). It also messes with google chrome and i cannot browse the web at all while it is trying to restore my iphone.
I have tried restarting my laptop and should i reinstall itunes? I simply dont see why it should take longer than 20 hours to copy over 20GB of data!
Can anyone help me?
Thank youI'm having this EXACT same problem with my iPhone 4, and I have the same computer stats (I have a Samsung Series 7)
Maybe you are looking for
-
How to host one application using different database connection on OAS?
Hi, Jdeveloper - 10.1.3.4 Application - ADF/BC Oracle Application Server - 10.1.3 Above our the specifications for our application, We have two database schemas different for development and production therfore we have different databse connections f
-
Issue with Select Query in the Delivery userexit USEREXIT_SAVE_DOCUMENT
Hi All, I am facing a strang issue with delivery userexit 1) I have a delivery user exit MV50AFZ1 - USEREXIT_SAVE_DOCUMENT. 2) In this user exit. I have written a select query as shown below *Get the already delivered data SELECT vbeln
-
What kind of security cable do I need to purchsare for a MacBook Pro with Retina Display?
Looking to purchase a security cable for a MacBook Pro, any suggestions?
-
Equium M50 - The battery will not charge
Hi, I need some advice regarding a charging problem on my PC. The battery will not charge and the level indicator shows a constant 5%. The machine is about 15months old and does not get hard usage, probably an average of 5-10 hours per week.Usually i
-
Acrobat Pro and other CS4 tools won't run.
Suddenly I can't execute two CS4 tools. Acrobat Pro reports a CS4 licensing issue and requests that I exceute another product like PhotoShop. Both versions of PhotoShop report error 148:3. Please advise/help. Joe