No data in Active sessions pie-chart and availability is 0%

Hi All,
Does anyone know why my Enterprise Manager cosole in Oracle 10g installed on windows xp professional is not showing any data? Availabilty is always 0% for the instance ORCL and the active sessions pie-chart is always showing 0.01 since May 17,2005.
Can anyone tell me how to configure EM so that instance ORCL and the active sessions start showing data again?
Thanks

Hi,
Kindly activate the data request. Post that, Under "request available for reporting" a symbol will appear which means that the data has been moved to Active table and is available for reporting at further levels.
And you can then check for contents in the active table of the DSo, you should get the records.
Change log: Contains the change history for the delta update from the DataStore object into other data targets, such as DataStore objects or InfoCubes. It makes sense in case of delta uploads.
Regards,
hemlata

Similar Messages

  • How to Avoid overlapping data label values in Pie Chart

    Hi,
    I am facing the problem when the data is more my pie chart data label value is overlapping.
    I tried with showing outside the data label value but customer is not accepting ,and i used the CollectedPie  option also but still its overlapping .So please any body knows how to resolve this problem as i need very urgent basis.
    Regards,
    HariKan
    HariKan

    Hi HariKan,
    Per my understanding that the Category group of the pie chart which will retuen many values so that the label will overlapping and you want to know is any method to deal with this kind of problem, right?
    In Reporting Services, when enabling data label in par charts, the position for data label only have two options: inside and outside.
    In your scenario, I recommend you to increase the size of the pie chart if you insist to choose the lable inside the pie chart as below:
    If you choose to "Enable 3D" in the chart area properties and choose to display the label outside, the label's layout will be more clear:
    Reference:
    Pie Charts (Report Builder and SSRS)
    Position Labels in a Chart (Report Builder and SSRS)
    If you have any question, please feel free to ask.
    Best regards,
    Vicky Liu
    Vicky Liu
    TechNet Community Support

  • Bar of Pie Chart and Age Population Chart ?

    Hi,
    I've got the last version of numbers and I'am asked for an assignement to do a Bar of Pie Chart and an Age Population Chart.
    I tried everything and searched on the internet but couldn't manage to find what I'm looking for.
    Could anyone explain how to do those ?
    Thanks

    Hi Vic,
    So "Bar of Pie" wasn't a typo! Looks like Jerry (and I) had a different interpretation of what you were trying to do.
    What you have there is two separate charts, using two separate (but related) sets of Data.
    The Pie chart uses the data listed on the table to the left below—individual numbers for the pets whose count is three or greater, and a grouped count for the others.
    The Stacked Bar chart uses a separate data set, listed on the second table—the individual counts for those pets represented fewer than three times each.
    Here's a variation.
    Charts are using the default colours as assigned by Numbers.
    See the Numbers '09 User Guide for details on reformatting the charts.
    Regards,
    Barry

  • Interactive Bar/pie chart and line graph, data from excel/text file -urgent

    Hi,
    I have a huge data in excell sheet which keeps updating every month. Data basically consists of service provider and there respective subscribers from various regions of the country over the years. The requirement is to give the viewers an interactive page where in they can make various combinations and can compare, cross examine data according to thier choice.
    We want the pie chart / bar graph or line graph to be created on the fly according to the combination made by the user.
    The site is hosted on a red hat linux server. how can a connection to the excel spreadsheet be made or is it possible to read from the text file if the entire data is exported to a text file.
    Is there any ready made tool/code available which can be customised according to the need.
    Thanx in advance
    Regards
    Prakash

    I certainly wouldn't pay for the graphing package at the previous link. check out http://www.object-refinery.com/jfreechart/ for a free, open-source, much better looking graphing package.

  • Create Pie Chart and Vertical bar chart using report builder 3.0 with sharepoint custom list

    Hi All,
    I have a client requirement to create reports which should show the graphical representation of SharePoint Custom List data. The reports are Month wise and YTD. Also i have to create dashboard.
    For creating reports, i have heard about Report Builder and SSRS. I have SQL server 2008r2 and installed report builder 3.0 but i am not aware of creating reports(KPI, Pie Chart, Vertical bar, etc.,) with sharepoint customlist.
    Can some one please help me on this.
    MercuryMan

    Here is some information about using the SharePoint List Data source with SSRS/Report Builder/BIDS:
    http://www.infotoad.com/blog/post/2012/10/11/using-a-sharepoint-list-connection-type-as-a-data-source-for-reporting-services.aspx
    http://technet.microsoft.com/en-us/library/ee633650.aspx
    http://www.codeproject.com/Articles/24469/SQL-Reporting-Services-data-from-SharePoint-lists
    Trevor Seward
    Follow or contact me at...
    &nbsp&nbsp
    This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

  • Problem with Pie chart and Hierarchy

    I have to display a Pie chart according to a hierarchy.
    The top node claims half of the chart.
    <u>A hierarchy for example</u>:
    Division A            450
       Department A1  100     
       Department A2  150
       Department A3  200
    The Pie chart  is divided to 4 parts (instead of 3), where Division A  takes 50%.
    I don’t want Division A to be seen in the chart.
    The best solution would be if WAD could ignore the first category.
    Thanks and best regards,
    Sigal.

    In WAD, mark the SUPPRESS_OPENHIERARCHIENODES parameter of the Pie Data Provider.

  • Proportional pie charts and annotation

    Hi,
    I have Numbers to help me make colourful, etc. graphs for inclusion in my MSc dissertation. I am using pie charts to show annual comparisons between common forms of disposing of waste. Ideally, I'd like the pie chart to show the amount of hazardous waste produced per annum, i.e. the larger the amount produced, the larger the pie chart. Other than doing it manually, by eye, can Numbers do this?
    Finally, when some of the fractions are small, instead of showing, say <1%, it will say 0%. Can I alter the labelling of the pie chart's slices?
    Many thanks - and I hope that this makes sense!
    Simon

    Axtron,
    Not seeing your available data, the only thing to go by is the image that comes to mind. Pie charts are excellent for depicting parts of the whole, so your concept of showing all the various waste materials produced in a year broken into percents works well. The pie charts will do the percents for you. Perhaps grouping a few waste types with small amounts and labeling them "All Others" would work.
    To show comparisons of successive years would require a pie chart for each year. One would scan across the row of charts and see certain types of waste were increasing or decreasing percent-wise over a period of time. But remember, each chart has to be the same size so as not to distort the data.
    If you are interested in showing increases and decreases in quantities of the various waste types over a period of time, perhaps a line or bar chart would be more effective. As a matter of fact, you could use either of these to show the percents of the pie chart as well. Once you have a table of data you can experiment with each type of chart to see which best emphasizes your point.
    pw

  • Flash Chart : Percentage values in the pie chart and  values in the legend

    Hi All,
    Query is :
    SELECT null link
    ,GN.region Region
    ,ROUND(100*ratio_to_report(COUNT(DISTINCT GN.submittedbyemail)) over (),2) value
    FROM goodnews_stories GN
    GROUP BY GN.region
    I use the above query to display the flash pie chart percentage values.
    The values are displayed in percentage in legend as well as on the chart.
    I need to display the values in the legend and percentage values in the chart.
    How this can be achieved ?
    Regards,
    Archana

    Hello,
    Can we do this using apex? I have observed in legend as well as on chart it displays the same values which are generated by the sql query.
    Regards,
    Archana

  • Automatic Fill colors for Report Builder pie charts and graphs are too repetitive and hard to differentiate

    I have pie charts or other graphs that show multiple results (7-20).  I set the "fill" colors to Automatic so that the results are dynamic (I don't want to specify a color for each result because I will then be limited that those results--I
    prefer it to be dynamic).
    I noticed that once you get above 4 or 5 results, no matter which palette is used, the "automatic" colors are so closely similar that it is hard to differentiate which color pertains to which result (group).  For example, you could have a
    reports that breaks the results into age groups like 1-18, 19-21, 22-25, 26-30, 31-41, 41-50, 51-65, 66-80, and 81+.  By the time you review the results, there's likely to be 3 pairs of colors (or more) that are so closely similar that you can't
    tell them apart (2 shades of yellow, 3 shades of blue, 2 shades of orange, or green, or teal, or purple or whatever).
    Is there a way to use Automatic for the color scheme (I don't care which color pertains to which category) but also specify to not use colors that seem to bleed together (so that someone viewing the report can actually tell the difference)?  Using SSRS
    2008 Report Builder, if it makes a difference.

    Hi JNehman,
    Reporting Services provides a list of predefined, built-in palettes that you can use to define a color set for series on your chart. All built-in palettes contain between 10 and 16 color values. You cannot extend the built-in palette to include more colors,
    so if you need more than 16 colors, you must define a custom palette.
    A custom palette let you add your own colors in the order you want them to appear on the chart. A custom palette is especially helpful if the number of series in your chart is unknown at design time. For more information, see
    Define Colors on a Chart Using a Palette (Report Builder and SSRS).
    Regards,
    Heidi Duan
    Heidi Duan
    TechNet Community Support

  • How to add dynamic visibility between pie chart and 2 bar charts?

    I have 3 section in pie chart. If i click on one section according bar chart have to appear...

    Hi Riaz,
    your subject-line and query seems to be different, please elaborate me the question properly so that i can explain you in clear in a single reply.
    For the query you have posted bar chart based on pie selection, if i understood your question clear. Goto File menu-->samples-->user guide samples-->Chart-Insertion will show the same what you have asked.
    Hope this Helps!!!
    --SumanT

  • Pie Chart and legend symbols

    Hi forum,
    who can help me to customize legend symbols in pie chart?
    Thanks in advanced

    Look at the last lines in caspian.css
    .pie-legend-symbol.chart-pie {
        -fx-background-radius: 8px;
        -fx-padding: 8px;
        -fx-border-color: null;
    }You can provide your own css for pie-legend-symbol.chart-pie to style the symbol how you like.
    If you need more control, do a css lookup after the chart has been shown on the stage:
    Set<Node> items = chart.lookupAll("Label.chart-legend-item");
    int i = 0;
    // these colors came from caspian.css .default-color0..4.chart-pie
    Color[] colors = { Color.web("#f9d900"), Color.web("#a9e200"), Color.web("#22bad9"), Color.web("#0181e2"), Color.web("#2f357f") };
    for (Node item : items) {
      Label label = (Label) item;
      final Rectangle rectangle = new Rectangle(10, 10, colors);
    final Glow niceEffect = new Glow();
    niceEffect.setInput(new Reflection());
    rectangle.setEffect(niceEffect);
    label.setGraphic(rectangle);
    i++;
    Here is a full example: https://gist.github.com/1422628                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                           

  • Secure banking session pages cached and available to 'swipe back' to

    I completed and logged out of an Internat Banking session this morning, then navigated to some other sites. I was using the 'swipe back' feature in Lion Safari, and wondered, "how far back can I go"?
    Sure enough - I swiped back through the entire Secure Internet banking session! I could see all details from the session but couldn't do anything that required a new action. Really bad!
    James

    Why not engage 'Private Browsing' before logging on to sensitive sites?  You can cancel it when you are finished.
    Frank

  • Active sessions showing no data in pie-chart

    Hi All,
    Does anyone know why my Enterprise Manager cosole in Oracle 10g installed on windows xp professional is not showing any data? Availabilty is always 0% for the instance ORCL and the active sessions pie-chart is always showing 0.01 since May 17,2005.
    Can anyone tell me how to configure EM so that instance ORCL and the active sessions start showing data again?
    Thanks

    What errors were you seeing in the log files, i am experienceing the same issue but the listener appears to be fine.

  • PIE chart report for planned, Actual and variants cost

    Hi Gurus,
    Is there any report provides information of Plan cost, Actual cost and Variants cost for sales order or production Plan in PIE CHART format or any other chart diagram.
    Regards,
    Ram Krishna

    Hello,
    Go to relevant S_ALR* report.
    For example execute
    S_ALR_87013611
    Settings ==> Options
    Office Integration => Microsoft Excel
    Remove Worksheet Protection
    ignore the warning message.
    Go to insert tab on the MS excel.
    Select the report data.
    Click on pie chart.
    You will be able to see the pie chart.
    Regards,
    Ravi

  • Pie Chart: How to capture data pertianing to the section  whereUser clicked

    In the UI there is a 1) Pie chart and a 2) table with search fields below the pie chart both displaying related information.
    we have a requirement to allow the user to click on various sections of the pie chart lets say it has two sections 1) one showing number of people with insurance as 75% and 2) another people without insurance as 25%. when the user clicks on the area representing 75% then the search fields related to the table should be automatically populated with the data related to that region of the pie chart (75%) lets say if there is drop down that allows the user to search for people "with" and "without" insurance then it should be set to "with insurance" since the user had clicked the area in the pie chart that pertains to percentage of people with insurance. basically, looking for some examples that would help us find out how to implement this feature since new to ADF?

    Use clickListener in Pie Chart.
    For details, check the documentation:
    http://jdevadf.oracle.com/adf-richclient-demo/docs/dvt/tagdoc/dvt_pieGraph.html
    Thanks,
    Navaneeth

Maybe you are looking for