No data in AWM Data Viewer
Hi all,
I am using Oracle 10G AWM for reporting purpose. I have created all required dimensions, measures. But when i view the data after maintaining it, it won't show any data but a blank Data Viewer. When I do view data for the respective dimensions, it shows me data as meant to. Could you please suggest what could be the reason for this?
I am on 10gR2, AWM 10.2.0.2.0A.
Thanks,
gtcol
Hi,
Have you checked the log for the build and verified that all your rows have been loaded?
If you maintain the cube in the AWM session this log should appear at the end of maintenance job. If you submit it to the oracle queue you should check out the xml_load_log table in the olapsys schema for the same log.
It might be that all your fact rows are rejected due to the fact that it can't find a reference to one or more dimensions.
Ragnar
Similar Messages
-
Unable to view OLAP data in AWM
AWM Version : 10.1.0.4
Database Ver : 10.1.0.4
I have created a AW using AWM and created dims, cube and measures. I have loaded data into all dims using AWM and was able to view the data. However, after loading the cube, and when I use view data from AWM, I get no data, no message even after 20 minutes. I infact truncated the workspace and recreated the workspace. No use.
Any ideas where and what could be problem ?
The cube load went fine. I verified it from the table olapsys.xml_load_log table. I have couple of records rejected but that shouldn't cause this problem I think.
I tried to view the data from excel and have similar problem. I was able to select the measures I want to display and after that it just hangs there.
I would like to know if anyone has similar problem and what you have done to fix it.
Thanks in advance.
Prasad.Hi Prasad,
I have almost the same problem again with
AWM Version : 10.1.0.4
Database Ver : 10.1.0.4
I load data into all dimensions successfully as well as the cube.I can see the data in the Cube Viewer but when try too see the data in Spread Sheet Add-in in Excel it hangs.
Regards,
Maria -
Refresh/Update data in a materialized view
Hi,
I have question about the data in a materialized view and how it is refreshed. My mat view has all my dimension-ids and my (for my specialize needs) aggregated measures from my fact table. I used the mat view wizard to create my view - which works perfectly. But now I wonder if I have to create some sort of mapping(?) or some sort of trigger to refresh the data in the mat view. Or is the data automatically refreshed when I start my fact table mappings. I use OWB 11gR2
thxMVs have properties for refresh - you an refresh based on schedules or when dependent data is committed or manually.
Cheers
David -
Is it possible to maintain table data in a maintenance view
hi all,
is it possible to maintain data in a table by using maintenance view.Hi,
if you maintain texts of your objects in different languages it's better to use a maint. view:
example
1) ZTAB01 - CU-Data
2) ZTAB01T - texts to CU-Data
3) ZTAB01_V - maint.-view of 1) and 2)
hope that helps -
Use evdre to query data from a SQL View
Hi all
I believe that it is possible to use evdre to query data from a SQL View. If this is possible then how does one go about setting it up in the evdre options (assuming that the view has already been created)?
Regards,
ByronByron, perhaps this is no longer supported, it might be worth opening up a case at service.sap.com on this. However, I did find the following on Page 11 of the "Usages and Considerations of EVDRE" pdf file. This doc is imbedded in the helpfile for BPC 7 SP5 (which was released in August of 2009, well after note 1315011 was last updated.
It looks like you are limited to one custom view per application, since you have to name the view in a parameter at the APPLICATION level. Go into BPC Administration, login to the application related to the custom view, choose "Set Application Parameters" and enter the name of the view to the Application Parameter called "EVDRE_QUERYVIEWNAME" If it is not listed, go ahead and create it at the bottom of the Application parameter screen.
Also: I interpreted the following info from Page 10 of the same doc:
In your EVDRE, set the following options:
QueryEngine: MANUAL
QueryType: enter either NEXJ OR TUPLE see below:
NEXJ - Use two-dimensional queries using the nonemptycrossjoin function
TUPLE - Use two-dimensional queries using tuples"
And I'm assuming you'd enter a Y for the following two parameters:
QueryViewName
"..to enforce the query engine to use a used-defined SQL view of the fact tables, when trying to read the values using SQL queries. This option is typically used in conjunction with the SQLOnly option (see below). "
Option SQLOnly
"..to enforce the query engine to only execute SQL queries, when reading data. This can be achieved using this option." -
How to retreive data from a maintainence view?
Hi all,
I have used select query to retreive data from a maintainence view. But it gave me a syntactical error that XYZ is not in abap dictionary , it's a database / projection view?
So can't we get data from a view using select query?
Please share if u have answers.
Thanks & regards,
ChandruHi,
Maintenance view will be created for database tables only.
Just display the maintainence from SE11 and click Tables tab in the screen
Here you can find the list of tables used to created for Maintainence view.
YOu can use these tables to write SELECT.
If you give us the maintainence table, we will help you.
Thanks,
Ramakrishna -
How to select the data from a Maintainance View into an internal table
Hi All,
Can anybody tell me how to select the data from a Maintainance View into an internal table.
Thanks,
srinivas.HI,
You can not retrieve data from A mentenance view.
For detail check this link,
http://help.sap.com/saphelp_nw2004s/helpdata/en/cf/21ed2d446011d189700000e8322d00/content.htm
Regards,
Anirban -
Exporting data from a materialized view in Oracle 10g
Can anybody tell me how to export data to a remote server and import data in that remote server without using ftp utility. Actually I want to export the data from a materialized view to the remote server and import the same in the remote server.
If everything works well, I'll put the exporting and importing in a cronjob.
Please let me know how can I do that if that's possible .
Any reply would be appreciated.
Thanks.Here is what I'm trying to do.
I created materialized views using multiple base tables in my local server and the base tables got populated using a long process.
Now I want to copy those data alone to some remote server since it doesn't have any base tables in it. For now, the remote server should depends on the localserver's data. I'm going to use the remote server's data for some testing purposes.
I know it is easy to create mat.views in the remote server but it doesn't have I don't want to do that now. I just want to copy the snapshots from my local server to the remote server.
Please let me know how to do that.
Thanks. -
Can't view changed data in journal data
Hi,
I have implemented JKM Oracle 10g Consistent Logminer on Oracle 10g with the following option.
- Asynchronous_mode : yes
- Auto_configuration : yes
1. Change Data Capture -> Add to CDC, 2.Subscriber->subscribe (sunopsis),
3. Start Journal
The journal has been started correctly wothout errors. The journalized table has always the symbol "green clock". All is gook working.
And then i inserted 1 record in source table, but i can't view changed data in journal data. I can't understand why journal data was generated.
There are no errors.
Help me !!!Did your designer was on the good context ?
Look the list box at the top right of the Designer interface.
You must have the same as the one where you define your journalization. -
How do I figure where is the data in a materialized view coming from
Hi: when I run select NAME, OWNER from dba_mview_refresh_times, I see a number of materialized views. How do I find more details about this view i.e where is the data coming from and which fields. The source table that is in another database changed. But the view on my database where the materialized view exist has not changed. I want to confirm from where is data coming in this view
TIA
RaviSQL> select * from dict where table_name like 'ALL%MVIEW%'
TABLE_NAME COMMENTS
ALL_BASE_TABLE_MVIEWS All materialized views with log(s) in the database that the user can s
ee
ALL_MVIEWS All materialized views in the database
ALL_MVIEW_AGGREGATES Description of the materialized view aggregates accessible to the user
ALL_MVIEW_ANALYSIS Description of the materialized views accessible to the user
ALL_MVIEW_COMMENTS Comments on materialized views accessible to the user
ALL_MVIEW_DETAIL_PARTITION Freshness information of all PCT materialized views in the database
ALL_MVIEW_DETAIL_RELATIONS Description of the materialized view detail tables accessible to the u
ser
ALL_MVIEW_DETAIL_SUBPARTITION Freshness information of all PCT materialized views in the database
ALL_MVIEW_JOINS Description of a join between two columns in the
WHERE clause of a materialized view accessible to the user
ALL_MVIEW_KEYS Description of the columns that appear in the GROUP BY
list of a materialized view accessible to the user
ALL_MVIEW_LOGS All materialized view logs in the database that the user can see
ALL_MVIEW_REFRESH_TIMES Materialized views and their last refresh times for each master table
that the user can look at
ALL_REGISTERED_MVIEWS Remote materialized views of local tables that the user can see
13 rows selected. -
Hi,
I need to hide data in a table..Only column headers required to display.. I tried by (display column headers only) in view..It is showing only column header in the view ..But when iam displaying the table in dashboard it displays data also..another approach i took is to hide data from column properties ...Custom css display:none.. it is working fine..But the thing is it will not display data in other views also.I need to hide data only in table view..any helps will be appreciated.. Thank youHi Aswin,
Try this....
Take columns twice and first set which is use in table view (use display:none)
and second set use in pivot table and exclude first set columns........
Cheers,
Aravind -
How to get list data and bind to data table or Grid view in share point 2010 using j query
hi,
How to bind list data in to data table or grid view using Sp Services.
How to use sp services in share point 2010 lists and document libraryHi, You can use List service, SPServices and JQuery to get your requiement done-
See here for an sample implementation -
http://sympmarc.com/2013/02/26/spservices-stories-10-jqgrid-implementation-using-spservices-in-sharepoint/
http://www.codeproject.com/Articles/343934/jqGrid-Implementation-using-SpServices-in-SharePoi
Mark (creator of SPServices) has some good documentation on how to use SPServices-
http://spservices.codeplex.com/wikipage?title=%24().SPServices
SPServices Stories #7 – Example Uses of SPServices, JavaScript and SharePoint
http://sympmarc.com/2013/02/15/spservices-stories-7-example-uses-of-spservices-javascript-and-sharepoint/
Hope this helps!
Ram - SharePoint Architect
Blog - SharePointDeveloper.in
Please vote or mark your question answered, if my reply helps you -
Report for viewing Sales order no against delivery date & actual GI date
Hi Experts,
Is there any report for viewing Sales order no against delivery date & *actual GI date*
Because in VL06F , i can only able to get planned GI.
Please guide regarding the same where i can get 'ACTUAL GI DATE ' against above combination .
Regards,
Sujit S.dear Hrishi,
i followed your suggestion, but couldn't get desired results,
here i can get planned GI date, where i wanted to get Actual GI date for complted deliveries,
thanks for your valuable reply.
@ G. Lakshmipathi ;-
i think i will need to develop z-report for fetching the data from the tables
VBAK (to get sale order reference) and
LIKP (to get delivery and actual GI date)
thanks for your reply,
Regards,
Sujit -
Discoverer workbooks return no data found on preseeded views
We have just upgraded to R12 from 11.0.3. We decided to do a fresh install of Discoverer 10G instead of trying to upgrade our old version of Discoverer. When trying to create a query in the pre-seeded views for Accounts Payable, Accounts Receivable, General Ledger, Order Management or Margin analysis, the worksheets all come back no data found. I can retrieve data from the preseeded views for Invnentory, shipping, cost management and purchasing. I have reviewed note 732826.1 and it appears that MOAC is my issue. However, where I am having issues is knowing what is the minimum that I need to set up on MOAC for Discoverer to work correctly. Has anyone done this?
Hi,
Are you using a seeded or custom responsibility? You need to have the organization system profile set up for the responsibility and the initialization of the session must set the VPD policy context. There are a number of ways of doing setting the policy contexts.
Rod West -
Can Data Links be established between Data sets based on View Objects?
Hi all,
In the BI Publisher Documentation it's given that Datasets based on view object queries do not support Data Links / Group Links. We found out that only way to establish relationship between view object Datasets is to create a view link and then upload it to create a Dataset.
1. Is there any other way to establish relationship between view objects Datasets in DataModel editor itself just as in the case of data sets based on (SQL queries e.t.c.)?
2. If so can View object Datasets be linked to Datasets based on other Datasources?
3. Will the Datalinks for View object Datasets be supported in any of the upcoming releases. Is there any ER logged for this case?
Any insight on the above issues will be really helpful.
ThanksEnhance the data source with date and time and populate these fields in the user exit using the function module IB_CONVERT_FROM_TIMESTAMP .
OR
You can create Z function module IB_CONVERT_FROM_TIMESTAMP in BW side and write a routine in update rules/transfer rules to populate date and time.
hope this helps ...
Ravi
Maybe you are looking for
-
GUI Programming with ABAP - Chapter 9
I am working my way through the ABAP Objects (Keller/Krueger) book, doing all the exercises, re-entering all the programs for learning purposes. I get to Chapter 9, and the package I am working with has moved form Z_ABAP_BOOK to SABAPDEMOS. There
-
How to make parallax scroll with play audio event in specific areas
Hello there, i would like to learn how can i play audio while scrol is in specific areas that i choosed. For example think that stage is 1920*5000 i want play audio when scroll is in 3000. I am using this code for parallax yepnope({ load:"http://cdn.
-
Web User Input Form - in terms for DQ & DI
Hi All, Thanks a lot for your excellent contribution on these topics. I have one question Is there a web user input form available for Business SMEs or User to input their rules/metadata which will get converted to equivalent code snippets into DI or
-
CE Flash files always start at the beginning?
I have had an online Continuing education course designed, which has the main contents embedded into .asp pages. The problem is that when customers "log-out", then return and "log in" again whithout closing thier browser, the fllash file always start
-
Multi-chat and stacked icon questions
Trying to multichat with two family members for the first time. One of the icons is showing only as the single camera, rather than the stacked icon, since her upgrade to 10.4.3 it seems (not positive about this.) She repaired permissions-- no luck. S