No data in BI Content Analyzer 2.0

Hi,
I trie to use the BI Content Analyzer, but after some runs no data is available in the tables RSCONTENTCHECK and RSCONTENTCHECK_M.
My cutomising settings are:
Global Settings
(Only those parameters that are filled are displayd)
Logical system = System x
Maximum lines = 15.000
Check Execution
(Only those parameters that are filled are displayd)
Logical system = System x
Checktype = Check for InfoObjects without

Sorry, I posted the message already by accident. Hereby the full message.
I trie to use the BI Content Analyzer, but after some runs no data is available in the tables RSCONTENTCHECK and RSCONTENTCHECK_M.
My cutomising settings are:
Global Settings
(Only those parameters that are filled are displayd)
Logical system = System x
Maximum lines = 15.000
Check Execution
(Only those parameters that are filled are displayd)
Logical system = System x
Checktype = Check for InfoObjects without an InfoObject Catalogue
Jobname = BI_X
Execute Check = X
Execute at once = X
Version = Active
Any help will be appreciated!!

Similar Messages

  • BI Content Analyzer

    How to configure BI content analyzer and browser in BI 7.0.
    Is there any step-by-step guide on configuring the Analyzer and Browser?
    I tried using help.sap.com documentation, but not getting any data into DSO.
    Please let me know if I am missing anything.
    Thanks in advance for your help
    Latha

    Martin
    I used the same document from help.sap.com to configure the setting. I am not sure what needs to be done. I  ran the transactions RSBICA, but no data is shown. I have loaded the DSOs and no data could be extracted.
    Thanks
    Latha

  • Content analyzer and browser

    Hi,
    What is Content analyzer and browser and what does the Tcode : RSBICA does...
    Regards,

    Martin
    I used the same document from help.sap.com to configure the setting. I am not sure what needs to be done. I  ran the transactions RSBICA, but no data is shown. I have loaded the DSOs and no data could be extracted.
    Thanks
    Latha

  • Transport the setting of the content analyzer

    Hi,
    Is it possible to transport the setting of the "chenk Execution" on the content analyzer? From Dev to QAS, PRO. for example, jobname, logical sys, check type.
    kind regards,
    Masaaki

    Hi.
    I think you can't change valid_from, because it's a system field in which creation date is put in. On the other hand you can change the date_to, but in order to change it you have to start from the bottom. So, for example you can't set date_to for an upper unit to a smaller date than it's set for the unit bellow.
    And I was refering to valid dates of org.unit and not for valid dates of addres of org.unit. For address both valid dates can be changed.
    Regards.

  • URL for data store in content Server

    Dear Experts,
    I m using this content server to connect with the Portal 7.0, as I m working with LSO and my content server is working fine as below....
    serverType="SAP HTTP Content Server";serverVendorId="Copyright SAP AG, All rights reserved 1998, 2001";serverVersion="6400";serverPatch="1";serverBuild="190";pVersion="0046";serverStatus="running";serverStatusDescription="";serverDate="2009-02-05";serverTime="10:47:29";startUpDate="2009-02-05";startUpTime="10:40:34";lastAccessDate="2009-02-05";lastAccessTime="10:41:40";
    contRep="ZADGAS_LSO";contRepStatus="defined";contRepStatusDescription="";contRepDescription="Content Server for LSO";contentStorageHost="xxx-xxx-cont";contentStorageName="LSO";secKeyVerification="y";defaultDocProt="";
    Now, I want to connect Portal and content server with the URL...for data storage in the content server.
    I m trying to use this URL, but is is not working...
    http://xxx-xxx-cont:1090/ConTentServer/ContentServer.dll?adminContRep&operation=docIdList&contRep=ZADGAS_LSO
    Can you please let me know what is the issue or should I make some configuration to this and please send the config documents to me ...at
    email address removed
    Thanks in advance.
    Ahmad
    Edited by: Michael Nicholls on Feb 5, 2009 10:29 PM

    Dear All,
    I want to connect SAP content server through Authrouing Environment for uploading the data in the content server.
    I want to use content server as WEBDAV REPOSITORY for access the docs.
    I think ... shared drive thing would work...only if the repository is created in the file systems isnt it?
    I m not sure about it
    Any help will be appreciated .
    Thanks,
    Ahmad

  • No customizing data found for content management profile

    Dear All,
    When we configured a business role for our call center agent, we copied existing out-of-box role and assigned to user's local own data. When the CRM Web UI was called, the window popped up fine, but there was an error message:
    No customizing data found for content management profile
    Can anybody advise why this error comes? I checked the content management profile in our system. There are 3 profiles there but I am not sure if any of them is linked to the nav bar profile we defined. Where to define it? How to remove this error message?
    Thanks in advance!
    Leon

    Hi Leon,
    To start with you need to check the details of the Business Role. Goto SPRO>CRM>Business Role-->Define Business Roles
    Select your Business Role and click on details, You can check if Role config key, Nav Bar profile, layout profile, Technical profile and PFCG Role ID is properly assigned.
    Once you assign the above profiles to business role you then assign Position like for e.g. Sales rep and Employee to the org model in PPOSA_CRM. Then select the position and goto menu bar and click on Goto>Detailed Object>Enchanced object description. Select Business role in the Infotype name and click in create infotype. Assign your business role.
    Check logging in after performing the above step. If it doesnt work assign the parameter ID - CRM_UI_FRAME and parameter value - X in the tcode SU01 for the user in CRM. Also assign SAP_ALL role just to make sure if it works.
    Hope this helps.
    Regards,
    Chandrakant

  • Genaric Data Source in Bank Analyzer

    Hi,
    I'm using Bank Analyzer 5.0 and need to intergrated with BI 7 for reporting. We have some customize reports which need to mannual create the Data Source in BA. I had created a generic data source in Bank Analyzer 5.0. But when i try to extract by using RSA3, no records was found. I tested to replicate over that Data Source into BI, it works, but without any records inside. Anyone here can help?
    Thanks in advance.

    Hi Kris,
    For me, I would think BA is more on functional. You need to understand the banking credit knowledge and also the calculation. You will need to Model the different product by using a diffenrent template in BA. You may not need a BI knowledge to drive BA but basic BI knowledge like create key figures and chareteristic is required for configuration of new fields in BA. Because there is a Tool BI in BA which is very similiar to BI.
    A BI knowledge is strongly needed if you are using the BA tool BI to do the ETL.
    To have more understanding on BA, you may go to the link as below. Hope I answer your question.
    http://help.sap.com/saphelp_bankanalyzer50/helpdata/en/f9/cdc23b95c8cb6fe10000000a114084/frameset.htm
    Regards

  • Please help - Content Analyzer - NW 04s

    Hi,
    Can anyone please let me know the steps to use BI Content Analyzer.
    Thanks,
    Nisha

    Hi Nisha,
    Please refer to this link and subsections for detailed information.
    http://help.sap.com/saphelp_nw70/helpdata/en/f2/52fa40fe14f523e10000000a155106/frameset.htm
    Regards, Uday
    Assign points for helpful answers and get one point for yourself

  • BI Content Analyzer - Check Consistency between Environments

    Hi,
    I would like to know if consistency between environments can be checked using BI Content Analyzer?
    Any information will be appreciated. Thanks.

    Hi,
    Never used it myself but have a look at the following :
    http://help.sap.com/saphelp_nw2004s/helpdata/en/4c/a2fa40badbf46fe10000000a1550b0/content.htm

  • Get items between in the publishingstartdate and publishingend date in a content type.

    Hi,
    I have a content type that has  two site columns publishingStartdate and publishing end date.
    The content type is added to a document library.
    When I create an item of the content type then it  gives two options for publishing start date as immediately and then a date fiel.d
    For publishing end date as never and a date control.
    Now I want to be able to get only the results which are published as in  todays date is in between  publishing start date and end date.
    But  it seems publihsingstart date and publishingend date fields are text type hence I cannot run CAML Query with Greater than  and less than.
    Is there a way to get the items and run the caml quey 

    Hey Dennis,
    Thanks for the reply.
    But I am facing a strange issue. That is I also want to be able to get only those items contain certain keyword in the title column.
    I am using the following query, But it is not giving the right results. Here is the query 
    <Where>
                          <And>
                                                     <Or>
                                                        <And>
                                                          <Or>
                                                              <And>
                                                                 <BeginsWith>
                                                                    <FieldRef Name='ContentTypeId'
    />
                                                                    <Value Type='ContentTypeId'>{0}</Value>
                                                                 </BeginsWith>
                                                                 <IsNull>
                                                                    <FieldRef Name='PublishingStartDate'
    />
                                                                 </IsNull>
                                                              </And>
                                                              <Leq>
                                                                 <FieldRef Name='PublishingStartDate' />
                                                                 <Value Type='DateTime'>
                                                                    <Today />
                                                                 </Value>
                                                              </Leq>
                                                           </Or>
                                                           <IsNull>
                                                              <FieldRef Name='PublishingEndDate' />
                                                           </IsNull>
                                                        </And>
                                                        <Geq>
                                                           <FieldRef Name='PublishingEndDate' />
                                                           <Value Type='DateTime'>
                                                              <Today />
                                                           </Value>
                                                        </Geq>
                                                     </Or>
                          <Contains>
                          <FieldRef Name='Title' />
                       <Value Type='Text'>{1}</Value>
                        </Contains>
                        </And>
                                                    </Where><OrderBy><FieldRef Name='PostedDate' Ascending='False' /></OrderBy>
    But it is giving me incorrect results.
    Should I be using joins in SPQuery.

  • API to retrieve data from SAP content server

    Is there an API available to retrieve data from SAP content server?

    Hi
    you could check out function groups starting with OPT.
    F.eks. OPTB, OPTC, OPTD
    Also check function group ARCHIVOBJECT.
    best regards
    Thomas Madsen Nielsen

  • How to Export/Import Datas from BEA content Repository

    Hi,
    I want to Export the datas from BEA content repository and import into the ORacle Repository. Can anybody please let me know how to do that . Thanks in advance.
    Best regards,
    Venkat.S

    copy the files from
    (username)/library/preferences/AICS3settings/en_us/workspaces
    to
    (username)/library/preferences/AICS5settings/en_us/workspaces

  • Error when transferring data; communication error when analyzing

    Hi,
    When I load the data from the SAP CRM source system. Iam getting the following error.
    Error when transferring data; communication error when analyzing
    Diagnosis
    Data Packets or Info Packets are missing in BW, but there were - as far as can be seen - no processing errors in the source system. It is
    therefore probable that an error arose in the data transfer.
    With the analysis an attempt was made to read the ALE outbox of the source system, which lead to error .
    It is possible that no connection exists to the source system.
    Procedure
    Check the TRFC overview in the source system.
    Check the connection of the source system for errors and check the
    authorizations and profiles of the remote user in both the BW and
    source systems.
    Check th ALE outbox of the source system for IDocs that have not been
    Can anyone guide me on this.
    Thanks in Advance
    Varun

    ok here's a development..when i logged in the source system to check the job...it says the job defn is incomplete. The description says:
    Definition for job ARFC:SYSLOAD1C800CRMREMOTE is incomplete. Job cannot be released
    Can anyone give an insight on it.
    Any kind of input will be appreciated.
    Regards
    Varun

  • How to Access data from SAP Content Server through SAP Portal

    Hi Experts,
    I want to aceess the data from SAP Content server through portal. Currently I am working on LSO business package. The SAP content server should work like Webdav as we uses KM as webdav.
    I am trying to use this URL into the CMS address but it is not working
    http://XXX-XXX-XXXX:1090/ConTentServer/ContentServer.dll?adminContRep&operation=docIdList&contRep=ZADGAS_LSO
    Is there any other procedure for acceesing the DATA  from SAP content server. ?
    Thanks,
    Ahmad

    If your Content Server is being used by DMS, then you can use the DMS Connector for KM.  This connector allows all documents stored in DMS to be accessed in Portal as if they are stored in KM.  For more info see this:
    http://help.sap.com/saphelp_erp60_sp/helpdata/en/42/d289b446076bb2e10000000a1553f6/frameset.htm
    Andrew

  • HT201320 I'm getting my emails but only the headers and date but no content. I have several email accounts set up they are all the same but it was OK yesterday What have I done please?

    Hello, can someone help please. I'm getting my emails OK but only the headers and date but no content. I have set up three accounts and they were all OK yesterday. What have I done or what can I do please?

    Sorry I see someone has answerd this altready Please ignore me !

Maybe you are looking for