No data in Multiprovider Query

Hi,
I have a query defined on a Multiprovider. When i execute the query, i do not get any data. I checked both ODs on which this Multiprovider is built. Both the ODS have data. What could be the reason.
Thanks.

Hi George,
I was refering to the selections and identification in your MP. If you go to your MP definition, you will be able to see the buttons for Identification and Selection on the Characteristic and Key Figure tabs. These are very important when it comes to viewing the data delivered by the multiprovider.
You can try transaction LISTCUBE wiht your MultiProvider and try to use the same selection conditions that you used in the query and see if you can get some data.
Hope this helps...

Similar Messages

Issue in multiprovider/query data

Hi all,
I'm seeing an issue with my data in multiprovider/query which I cannot understand.
I have a multiprovider with a cube. I'm able to see data in the cube with a certain restriction but when I put the same restriction in the multiprovider I'm not able to see the data. I have a query with the same restriction as well and there too the results are not showing.
I have checked the assignment in the multiprovider and it is correctly assigned i.e. from the cube from where I want the data.
When I tried to display data in the multiprovider without any key figures selected then the data shows up correctly. Why is this happening and what can I do to fix this?
Thanks

Hi,
First check report data by using 0infoprov iobj in multi provider and restrict with cube . check either you are getting same data or not as cube including kfg's.
able to see data in the cube with a certain restriction : what type of restriction's applied if possible give detail.
Thanks.

How to get master data records that do not have transaction data in a query

Hi,
How to get master data records that do not have transaction data in a query output. Can we create a query or any other way to get the master data records that do not have transaction data?

Hi,
Create a multiprovider which includes transactional data target and master data info object. Make sure that identification for this master data info object is ticked on both the provider.
Create report on this multiprovider , keep the master data info object in rows , and now you should able to see all the values which are there in master data info object irrespective of transaction happened or not .
Next you may create condition showing only zero keyfigure values , ie. master data without any transaction.
Hope that helps.
Regards
Mr Kapadia

MDX Query Failed to execute when universe created on MultiProvider Query

Hi All,
I am running the WebI report created on the universe which is built on Query.
The data flow model in our system for this query is:
Data Store Object> Infoset-> multiProvider--->Query.
When I drag only on Dimension object in the Webi Report without any Prompts the report works fine.
But when I add any other Dimension or any Prompt in the WebI Query it gives me following error:
A database error occured. The database error text is: The MDX query SELECT { [Measures].[4EGM09GXGU939C3RJH2G9DOQY] } ON COLUMNS , NON EMPTY CROSSJOIN( [Z_WM_IS01___F1].[LEVEL01].MEMBERS, [Z_WM_IS01___F12].[LEVEL01].MEMBERS ) DIMENSION PROPERTIES [Z_WM_IS01___F12].[2Z_WM_IS01___F12], [Z_WM_IS01___F1].[2Z_WM_IS01___F1] ON ROWS FROM [ZWM_M02/Z_ZWM_M02_Q001] failed to execute with the error Unknown error. (WIS 10901)
But if i create the Universe on Query which is built on DSO then WebI is working fine.
Is there any restrictions on using Query on multiprovider?
Or do I have to make any configuration at BO server?
How do I configure logging for WebI and Designer to check the Log records?
Do I have to change anything related to any MDX Parser in BO Server?
We are using folowing versions:
SAP BI 7.0 and BOXIR3.1
Request to pls help me to solve this problem.

Thanks Ravi for ur inputs.
The report is working fine now.
There was the problem with the Mandatory prompts defined in SAP BI Query on which universe was developed.
U should have only those Prompts as mandatory in SAp BI Query which are Universe level prompt, if some mandatory prompts defined as Class level promts in universe then the MDX Query generated based on WEBI report will not Execute.

Detail data at multiprovider level

Hi,
I have a query on multiprovider constructed over 2 DSO's. the Query over DSO shows the data in Detail level, but when we execute the query on multiprovider we are getting aggregated level. is there any options in multiprovider to change the data flow to query to detail level.
Thanks for your suggestions.
Joseph M.

When you want to see data at detailed level you need to drilldown in the query at that details.
For eg : If you want to see data at sales doc level then just drill down by sales doc.
If you want to see data by sales doc item level then you need to drill down by sales doc item level.
If you dont want to see sales doc item but want to see all key figure at sales doc item level then put sales doc item in the rows of query designer and choose No Display as its property.
Hope this helps.

Can we view data in Multiprovider

Hello All
In one of my interview he asked me can v view data in multiprovider.(Not in reporting level).
I said no,he said yes?
If anyone knows abt this pl let me know.
Regards
balaji

Hi Balaji,
Yes. Your are right that teh multi-provider does not store any data. It is like a view that displays the data from various data targets using union. LISTCUBE displays the data using those unions and displays the data. It is not fetching data from any underlying table of the Multi-provider. Probably if you debug then you would find the various SQL statements fetching data from the other data targets using the join conditions.
LISTCUBE is just meant for displaying the data from an Info-provider in the backend.
If you are familiar with R/3 then you would have noticed that you can see the data in table or view in SE11/SE16 even though a table has data where as a View does not. It is something similar to that.
Hope this helps.
Bye
Dinesh

Can't see data in Multiprovider

Hi All,
I've created a multiprovider on top of some infosets.
I have one field in multiprovider called purchasing group which is assigned to the infosets. When I tried to display data I am not getting the data for this field. Where as the DSOs have the data for this field.
I don't understand why its happening. I've checked the joins in infosets and assignments in multiprovider. everything is fine. But not getting data in multiprovider.
If anybody has even a little clue please reply.
Points will be assigned.
Thanks
AP

Hi,
Please check the following link, it may help you
[http://help.sap.com/saphelp_nw70/helpdata/EN/0f/17b63d799f6b3be10000000a114084/frameset.htm]
Check in "Consistency Check for Compounding " in the above link.
Regards,
Uma
Edited by: Uma Mageswari on Jun 3, 2008 5:58 AM

Unable to access the data from Data Management Gateway: Query timeout expired

Hi,
Since 2-3 days the data refresh is failing on our PowerBI site. I checked below:
1. The gateway is in running status.
2. Data source is also in ready status and test connection worked fine too.
3. Below is the error in System Health -
Failed to refresh the data source. An internal service error has occurred. Retry the operation at a later time. If the problem persists, contact Microsoft support for further assistance.
Error code: 4025
4. Below is the error in Event Viewer.
Unable to access the data from Data Management Gateway: Query timeout expired. Please check 1) whether the data source is available 2) whether the gateway on-premises service is running using Windows Event Logs.
5. This is the correlational id for latest refresh failure
is
f9030dd8-af4c-4225-8674-50ce85a770d0
6.
Refresh History error is –
Errors in the high-level relational engine. The following exception occurred while the managed IDataReader interface was being used: The operation has timed out. Errors in the high-level relational engine. The following exception occurred while the
managed IDataReader interface was being used: Query timeout expired.
Any idea what could have went wrong suddenly, everything was working fine from last 1 month.
Thanks,
Richa

Never mind, figured out there was a lock on SQL table which caused all the problems. Once I released the lock it PowerPivot refresh started working fine.
Thanks.

Can we use session variables in BI publisher's Data Model SQL Query?

Hi Experts,
We need to implement Data level security in BI Publisher 11g.
In OBIEE we do so by using session variables, so just wanted to ask if we can use the same session variables in BI Publisher as well
ie can we include the where clause in the Data Models SQL Query like
Where ORG_ID = @{biServer.variables['NQ_SESSION.INV_ORG']}
Let me know your views on this.
PS: We are implementing EBS r12 security in BI Publisher.
Thanks

Read this -> OBIEE 11g: Error: "[nQSError: 23006] The session variable, NQ_SESSION.LAN_INT, has no value definition." when Creating a SQL Query using the session variable NQ_SESSION.LAN_INT in BI Publisher [ID 1511676.1]
Follow the ER - BUG:13607750 - NEED TO BE ABLE TO SET A SESSION VARIABLE IN OBIEE AND USE IT IN BI PUBLISHER
HTH,
SVS

LastDataRefresh(ROLLUPTIME)-does not show correct date for multiprovider

Hi,
The Last data refresh (Rolluptime) shows incorrect date for multiprovider and we use lot of multiproviders.
Removing the last data refresh from the "Information" button of the Bex Web Analyzer which is using the "Information field web item", shows an empty space and a colon ":" and an empty box.
Please let me know if there is any other way to remove the last data fresh without showing the empty space.
We are on SPS 7 and FEP 7. Is this problem still exist in SPS 8/FEP 8?
Thankyou,
-Sini
Message was edited by: Sini Kumar

Depends on your definition of correct. Your initial question was that this time does not display. This time should display. For a multprovider, it uses this formula
first(last(<All InfoProviders under Multi - ROLLUPTIME>))
It uses the earliest rollup time from the last rolluptime of all the base providers.

SAP MII 14.0 SP5 Patch 11 - Error has occurred while processing data stream Dynamic Query role is not assigned to the Data Server

Hello All,
We are using a two tier architecture.
Our Corp server calls the refinery server.
Our CORP MII server uses user id abc_user to connect to the refinery data server.
The user id abc_user has the SAP_xMII_Dynamic_Query role.
The data server also has the checkbox for allow dynamic query enabled.
But we are still getting the following error
Error has occurred while processing data stream
Dynamic Query role is not assigned to the Data Server; Use query template
Once we add the SAP_xMII_Dynamic_Query role to the data server everything works fine. Is this feature by design ?
Thanks,
Kiran

Thanks Anushree !!
I thought that just adding the role to the user and enabling the dynamic query checkbox on the data server should work.
But we even needed to add the role to the data server.
Thanks,
Kiran

No data from BW-Query in BO-tools

Hello all
On a newly installed BO XI 3.1 with the SAP integration kit I cannot get data from my existing BW queries.
For example, if I start Xcelsius and add my BW-system as connection I can get the structure of the query (headings) but no data is displayed, neither in the connection's preview tab nor in the web preview.
The same happens if I create a QaaWS on this BW-query - I see the query headings, but not the actual data.
The query shows data if I open it directly in my web browser and it's a really simple one: no variables, no extras, only a few columns and rows.
I use SAP BW 7.01 SP6, XI 3.1 12.3.3 and XCelsius 2008 5.3.4
In SAP BW my user has SAP_ALL as well as BOE Admin & Content producer roles.
I'm relatively new to BO products so I have no idea where to start looking for the cause. Please help!
BR
Kanan

Hi
After I found the document "Using Xcelsius 2008 with SAP NetWeaver BW" (http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/10ad2489-8956-2d10-f8ab-ed4cce2766da?quicklink=index&overridelayout=true) and followed the steps it works.
It seems as if the error was not in the system but in front of it - a typical case of RTFM, although the manuals are not always easy to find.
sorry & thanks.
BR
Kanan

Key date for a query

Dear All,
I have created a customer exit variable on key date of a query.
With this input variable i am first asking user to input one particular date say he enters 31.12.2010 then i am trying to add 1 more day to it and making it 01.01.2011.
I have put a break point in the code but it does not stop the processing there.. report executes directly taking the first user input.
I want to add 1 more day to the user entered date and this modifiied date should be the input date for key date field.
Below is my code.
WHEN 'ZCAL_DAY_EXT'.
    IF I_STEP = 2. "after the popup
      LOOP AT I_T_VAR_RANGE INTO LOC_VAR_RANGE
      WHERE VNAM = 'ZCAL_DAY_EXT'.
        CLEAR L_S_RANGE.
      ENDLOOP.
      DATA: v_temp like sy-datum.
      v_temp = loc_var_range-low.
      v_temp = v_temp + 1.
      L_S_RANGE-LOW = v_temp.
      L_S_RANGE-SIGN = 'I'.
      L_S_RANGE-OPT = 'EQ'.
      APPEND L_S_RANGE TO E_T_RANGE.
    ENDIF.
Do let me know where am i going wrong? Or is it we cannot use customer exit with Key date.
Thanks & Regards,
Anup
Edited by: Anup Chaudhari on Aug 2, 2011 7:16 AM

Hi Anup,
Basically I_STEP = 1 is used for populating the default value which will be shown on selection screen and I_STEP = 2 is the step in which you does the processing on variable values which are entered on selection screen.
I am surprised that your internal table is empty, actually it is supposed to contain all the variable values which are entered in I_STEP = 1.
Can you try to add some more variables along with the current variable and check whether their value is coming in the internal table or not?
Finally what you can try is get the user input date in one variable and then create another customer exit variable in which you will calculate the new value and use this variable in Key date, the problem might be that we are trying to modify the same variable, actually it should not be the problem but I have no clue what is happening and you can just try this alternative.
Regards,
Durgesh.

Oracle Forms - How can I create a Data Block with query

Dear friends I have a question, I couldn't do this..
I have a sql query, I want to show the datas of the query.. How can I do this. ?
Data Block Wizard wants a table, view or stored procedure, but I have a query, how can I create a data block with my query.. I m waiting your helps..? Please...
Semih

Hi,
You have two options
1. create a view and base the block on the view
2. create a block with a query Data Source Type of 'FROM clause query'
Hope this helps
Neil

"Source not found" Error creating URL Data control with query parameters

Hi,
I have a restful service for which i want to create a URL data control. I am able to create the URL data control successfully when i am not passing any parameters in the Source field. But if i am specifying the parameters in the source field like this Department=##ParamName##, something weird is happening. After giving the param string in the Source field, it asks for default param value to test the url. It tests the url successfully. After that i select XML as the data format in which i am mentioning the xsd like this . "file:///C:/..../something.xsd" . And this is when i am getting the error. "Invalid Connection. The source is not found". I am giving exactly same path for xsd which i gave while creating URL data control without query parameters. Infact i was able to create the URL data control with query parameters successfully till afternoon. after that it started giving me this error all of a sudden. Infact as soon as i was able to create a URL data contol with query parameter successfully, i took a backup of the application before moving further. But even that backup is not working now.
As far as i understand, i dont think there will be any change in xsd if query params are passed to a web service. Please correct me if i am wrong.
Just dont know what could be the issue. Please help
Thanks

Hi,
xsd is used for the URL service to know what the returned data structure is so it can create the ADF DC metadata
Frank

No data in Multiprovider Query

Similar Messages

Maybe you are looking for