No data in my bw system - need help!

hi
i am new in sap BW and i m trying to set up a bw system that loads cubes from a sap source system for a hospital
basically what has happened up to now is i ve activated all the is-h infosources in my sap system and through rsa3 there i ve seen that some of them like 0hc_movements 0hc_services do bring data properly
i created my connections in sm59 and in my bw systems i right-clicked-->create my infosource to my r3 system and set that remote connection up
in my bw system i then went to 'BI content' and created a couple of infocubes automatically 'in dataflow before'
then in infoprovider under my infocube i right-clicked my datasource and created an infopackage for filling that but i keep getting an error message 'Caller 09 contains an error message' and i have absolutely no idea why i get that message
it is not a memory issue,i have replicated the datasource, and i have activated all the objects in my structure again though they were already active anyway
i would really appreciate your help as i am completely stuck here and need to deliver this asap
ps. not sure if it is relevant but when i rsa3 my BW system i cant see all the infosources that i do see when i rsa3 the source system, instead i get a 'datasource is not defined in the source system'
what have i done wrong???

solved
tha solution to all these caller 09 error and check load from source etc etc si this:
http://www.sapfans.com/forums/viewtopic.php?p=932153&sid=2572ec609a0bb649d5582140e56eba67
i am just posting it cause everyone else who had thsi issue and solved it did not bother to say how

Similar Messages

Data base problem-new user need help

im new user and trying to insert data base to my page using
"asp.net c",i get connetction to my data base but when i try to
build a form ,and then preview him i get ,the following message
Server Error in '/' Application.
Parser Error
Description: An error occurred during the parsing of a
resource required to service this request. Please review the
following specific parse error details and modify your source file
appropriately.
Parser Error Message: File or assembly name DreamweaverCtrls,
or one of its dependencies, was not found.
Source Error:
Line 1: <%@ Page Language="C#" ContentType="text/html"
ResponseEncoding="iso-8859-1" %>
Line 2: <%@ Register TagPrefix="MM"
Namespace="DreamweaverCtrls"
Assembly="DreamweaverCtrls,version=1.0.0.0,publicKeyToken=836f606ede05d46a,culture=neutra l"
%>
Line 3: <MM
ataSet
Line 4: id="DataSet1"
Source File: e:\inetpub\wwwroot\Untitled-1.aspx Line: 2
Assembly Load Trace: The following information can be helpful
to determine why the assembly 'DreamweaverCtrls' could not be
loaded.
=== Pre-bind state information ===
LOG: DisplayName = DreamweaverCtrls, Version=1.0.0.0,
Culture=neutral, PublicKeyToken=836f606ede05d46a
(Fully-specified)
LOG: Appbase = file:///e:/inetpub/wwwroot
LOG: Initial PrivatePath = bin
Calling assembly : (Unknown).
===
LOG: Publisher policy file is not found.
LOG: No redirect found in host configuration file
(E:\WINDOWS\Microsoft.NET\Framework\v1.1.4322\aspnet.config).
LOG: Using machine configuration file from
E:\WINDOWS\Microsoft.NET\Framework\v1.1.4322\config\machine.config.
LOG: Post-policy reference: DreamweaverCtrls,
Version=1.0.0.0, Culture=neutral, PublicKeyToken=836f606ede05d46a
LOG: Attempting download of new URL
file:///E:/WINDOWS/Microsoft.NET/Framework/v1.1.4322/Temporary
ASP.NET Files/root/804ee9b4/26f0df32/DreamweaverCtrls.DLL.
LOG: Attempting download of new URL
file:///E:/WINDOWS/Microsoft.NET/Framework/v1.1.4322/Temporary
ASP.NET
Files/root/804ee9b4/26f0df32/DreamweaverCtrls/DreamweaverCtrls.DLL.
LOG: Attempting download of new URL
file:///e:/inetpub/wwwroot/bin/DreamweaverCtrls.DLL.
LOG: Attempting download of new URL
file:///e:/inetpub/wwwroot/bin/DreamweaverCtrls/DreamweaverCtrls.DLL.
LOG: Attempting download of new URL
file:///E:/WINDOWS/Microsoft.NET/Framework/v1.1.4322/Temporary
ASP.NET Files/root/804ee9b4/26f0df32/DreamweaverCtrls.EXE.
LOG: Attempting download of new URL
file:///E:/WINDOWS/Microsoft.NET/Framework/v1.1.4322/Temporary
ASP.NET
Files/root/804ee9b4/26f0df32/DreamweaverCtrls/DreamweaverCtrls.EXE.
LOG: Attempting download of new URL
file:///e:/inetpub/wwwroot/bin/DreamweaverCtrls.EXE.
LOG: Attempting download of new URL
file:///e:/inetpub/wwwroot/bin/DreamweaverCtrls/DreamweaverCtrls.EXE.
Version Information: Microsoft .NET Framework
Version:1.1.4322.573; ASP.NET Version:1.1.4322.573
I know its probably something stupid ,so u can lauph,but i
realy cant fix it.
need help
tnx for advance

anyone? please help

. Got a new operating system. need help syncing

Need help replace operating system.Backed up itunes. reinstalled itunes. when i try to sync iphone it says that it will delete phone and replace with this new library. dont want to lose any new content on phone.

See Recover your iTunes library from your iPod or iOS device.
tt2

My iPhone4s turned itself off and will not turn back on unless it is charge data all times. I need help and answers please.

My iPhone4s turned itself off and will not turn back on unless it is charged at all times. I need help and answers please.

And we would need more info. "will not turn back on unless it is charged at all times." is pretty obvious: the phone will obviously not turn on unless it is charged.
Describe your problem clearly.

Date format and number format- need help

Hi everyone,
I'm working with JDeveloper10.1.2, struts and uix pages.
I have 2 problems:
1 - I have a field of type date in my uix page and the format is like this='24-Jun-2006', but I need to change this format to be '2006/06/24'.
2 - I have an attribute of type number(salary) and when I drag and drop this attribute from the DataControl Pallete and run the project, in the uix page I see a number, for example: salary = '123456', but I should see salary = '123.456,00'.
And when I write, for example '123.456,00', when I commit this value, I should see in my DataBase something like this '123456,00'.
I alredy tried to change the attribute properties in the Entity Object but without success. :(
Can anyone help me with this problems?
Thanks,
Atena
Message was edited by:
Atena

nd when I write, for example '123.456,00', when I
commit this value, I should see in my DataBase
something like this '123456,00'.Sorry I replied before thinking about the problem. You will not see the value in the db as such, the db will show the values differently depending on the session settings.
The values will only show up as such in the form. To see them such in the db do:
alter session set nls_date_format='yyyy.mm.dd'
for the date and
alter session set nld_number_format='0.00'
for the number

An Oracle data pump situation that I need help with

Oracle 10g running on Sun Solaris:
I have written a unix shell script that exports data into a dump file(data pump export using expdp). Similarly I have import script that imports the data from the dump file(import using impdp). These are not schema exports. In other words, we have logically divided our schema into 4 different groups based on their functionality (group1, group2,group3 and group4). Each of these groups consists of about 30-40 tables. For expdp, there are 4 parfiles. group1.par, group2.par, group3.par and group4.par. Depending on what parameter you pass while running the script, the respective par file will be picked and an export will be done.
For example,
While running,
exp_script.ksh group1
will pick up group1.par and will export into group1.dmp.
Similarly,
exp_script.ksh group3
will pick up group3.par and will export into group3.dmp.
My import script also needs the parameter to be passed to pick the right dmp file.
For example,
imp_script.ksh group3
will pick up group3.dmp and import every table that group3.dmp has(Here, import process does not need par files - all it needs is the right dmp file. )
I am now faced with a difficulty, where, I must use Oracle's dbms_datapump API, to achieve the above same(and not expdp and impdp). I haven't used this API before. How best can I use this API to stick with my above stategy -- which is, I eventually need group1.dmp, group2.dmp, group3.dmp and group4.dmp. I will need to pass table names that each group contains. How do I do this using this API ? Can someone point me to an example, or perhaps suggest ?
Thanks

Or atleast, how do you do a table export using dbms_datapump ?

Caching read-only data in a weblogic cluster: Need Help

Hello,
I'm working on the development of a web site that will be based on a weblogic cluster spread across several weblogic instances running on several unix boxes.
To avoid frequent hits to the database, I would like hold a huge amount of data in the application's in-memory cache. The idea is to query the database at startup and store the results in memory for the life of the JVM.
I have three questions around this:
1. Is it advisable to store this data in the form of read-only entity beans?
2. If not, what other options do I have?
3. In some rare cases, a back-end script might change (and commit) data contained in one or two of these 64000 records. What is the best way of propagating these data changes across the cluster?
Any help in this regard would be greatly appreciated.
Regards,
Dipak Jha

Could somebody please guide me on this?
Dipak Jha

Palm Desktop stores Email Data where??? *Need help please*

Where in Palm Desktop does it store information about Email accounts in Versamail? I am trying to pull up some old account information that will deleted by accident on my phone. Is there anyway to view what data was hotsynced with Palm Desktop?
Thank you!
Post relates to: Treo 755p (Sprint)

Unfortnately I have not synced it with my desktop outlook BUT I do know that somewhere the information is stored and I have finally located the info but now I need a .PDB file reader that can read all the encrypted text. I found somewhere someone used a "Unknown" software to read it and they received all the information from the .pdb file. Anyone have an idea of where I can find one that can read all the data? I have tried iSilo (sp?) along with pdb converter and no luck =(

ALMOST ALL DATA LOST! PRELUDE CC; NEED HELP!!!

Hallo Adobe Community / Prelude users,
I am experiencing a huge problem with Prelude CC that will most probably cost me a week of work if I can't solve it. Any ideas welcome.
Setup:
iMac 2,4GHz, OSX 10.9.2
Areca Thunderbolt RAID 10
Adobe Creative Cloud Prelude CC v2.2.0
The issue:
I have ingested about 1,5TB of footage of mixed kindes of formates:
- ProRes 4444
- ProRes 422 (HQ)
- MXF
- .jpeg
- H.264 .mov
The whole ingest procedure has been relealized within Prelude CC on a MacBook. After that we copied the Prelude project onto the iMac and relinked all clips -> no problemo.
I created a specific set of subclip presets and started tagging. I spent about a week of creating supclips with different kinds of discriptions to get an idea and structure of the mass of footage.
Everything went fine and I manually copied the project two days ago to a different location, renamed it as backup, locked the file and continued work on the original one.
Just today we opened Prelude again and found out that ALMOST ALL SUBCLIPS WERE GONE!! The weird thing is that some folders kept their subclips but most of them didn't.
I tried the following to resolve the issue:
- close/reopen
- restart computer
- look for auto-backups / found none
- After having no success with the above approaches I tried to open my backup-file. Turns out that also my backup file lacks most of the subclips.
- I copy the file to the macbook / same issue
- Finally I opened the file in Text Edit to check the project struktur: I find out that all media links and subclips are beeing saved within the project file and that all my subclips are also missing within the file.
After realizing this, I am allmost sure that there is no hope to get my project file back to life and that I have just lost a week of work.
What I need to make sure/find out,tho, is the following:
- Has anyone encountered similar problems?
- Did I make a mistake?
- How could that happen?
- Is it possible that sth like this will happen again?
I really need to pin that problem to make sure that I won't loose another week on the project as I have none to spare.
Otherwise I will start editing right within Premiere CC.
Please let me know if you have any idease/solutions/questions to the issue.
cheers guys
Toni

Hi Toni -
Thank you for your post – sorry about the issue you are having.
A few things to note – but first I wanted you to know I've forwarded this to the Prelude team QE directly and asked them to contact you to help.
When it comes to sub clips (and all markers and metadata actually), Prelude uses XMP to store it all. Depending on your media type this metadata is either embedded within the file itself (as is the case with MOV) or is written to a sidecar file (as is the case with MXF). The sidecar file will have the same name as the media file but with the extension ".XMP". Any sub clips or other markers you added to the clips will reside there.
When you moved your media from one location to another, is it possible that not all of the files were transferred? I'm wondering if the ".XMP" files didn't come along for the ride? This would certainly impact the MXF files. The QuickTime MOV files should not be affected as the metadata is embedded directly into those assets. Can you let us know if the MOV assets are the ones with the sub clips still?
Also – if you rename the MXF files on disk AFTER adding metadata, the associated XMP sidecar files will no longer link to the asset. Any chance the files were renamed AFTER logging during your file migration?
Hope this helps. Someone from the QE team will reach out to you soon.
Regards,
Michael

Airflow System need help!

Hello, I am wondering if my airflow system in my computer is ok, here it is.
2 fans in the rear of my case blow air out with the power suply dual fans.
Cpu fan that come with the cpu blowing air on the cpu.
1 fan on the side of my case *attach to the side that can be remove to open the case* which I do not know if it should blow in or out?... (right now it blow air in the case directly to the cpu fan)
Basicaly, Side fan blow air on the cpu fan that blow air on the cpu and the 2 rear fans with power suply blowing air out whith the power supply help... I do not have a front fan that should blow air inside, does the front fan is very important, should I take the side fan to put it in front instead?

Fans in the front and sides should blow air in. CPU fans should go the direction that the HSF makers recommend based on design. Rear and top fans should blow outward. You also should have a rear fan at the least and not depend on what the PSU fans are doing. Otherwise you can overheat and burn out the PSU.
Rear and front case fans should be controlled off the MB in most cases. Sometimes there are not enough jacks to control all your fans so you should set then to blow as much air as you can stand noise wise if you are doing your own wirung harness or get a seperate fan controller with temp probes for more accurate controil over case temps.

Data display on Bar graphs - Needs help

Hi,
I am facing a problem with discoverer's bar graphs.
There is a 2D Bar Graph, which is required to display the respective strength for all the classes on the axis(e.g regionwise sales for North, West, East, South). In Oracle discoverer the sales is shown only when the mouse is pointed over the respective bar but that too at the bottom. The fixed values of the sales is not being displayed above each bar permanently.
But the client requirement is to display the strength for each class above each bar numerically so that a print out can be taken along with values.
Please suggest how can this be done.
Goga

On the Plot Area tab, check the "Show Data Labels for bars". To the right of that, clicking the "Options" button will let you place the labels above or in the bars.
Also, check that the graph background color is not the same as the font color.

Need help in creating webas abap system

hi
new to create jco and techinical system need help
experts i have few faqs on creating techinical system plz help me
i have 4.7ee r/3 and portal 2004s sp9
wer can i find these values plz give me navigation
SID == ?
MESG SEVER PORT ===?
to add application server
application host name ==?
application instance number ==?
client number ==?
logical client name ==?
it is asking to select a software component wat we have to select to finish
wen i gave some dummy values
i get an error
CIM_ERR_ALREADY_EXISTS: Instance already exists: SAP_BCApplicationServer.CreationClassName="SAP_BCApplicationServer",Name="C11.Number.00.HostName.rama"
is it necessary to have WAS in r/3 to connect to portal plz explain

i want to use jco
but for that we need to create a techinical system
i followed these steps for techinical system
1 Step
selected web as abap
2nd step
sid = PRD
installation number== INITIAL
database host name== super
3rd step
message server name = 3600+instance
i took system number from sap gui(21)
so i gave 3600+21=3621
central application sever
instance number ==21
next pressed button -->add new logon group
entered longon group == entered value
which i found in t-code -smlg
4th Step
Add application server
host == gave r/3 ip 198.168.0.2
instance==21
client number = 800
logical client = left it empty
5 th step
selected one componenet and finished
after this i created the jco
1st Step general data
name =test1
client=800
2nd step j2ee cluster
checked the box
use local j2ee engine
3rd step
selected dictionary meta data
4 th
selected the techinical system
5th
user name -->sapuser
pasww-->india
pressed finish
now i found the jco in green color
but i pinged it
i got mesg
ping failed

MY phone is using large amounts of data, when i then go to system services, it s my mapping services thats causing it. what are mapping services and how do i swithch them off. i really need help.

MY phone is using large amounts of data, when i then go to system services, it s my mapping services thats causing it. what are mapping services and how do i swithch them off. i really need help.

I Have the same problem, I switched off location services, maps in data, whatever else maps could be involved in nd then just last nite it chewed 100mb... I'm also on vodacom so I'm seeing a pattern here somehow. Siri was switched on however so I switched it off now nd will see what happens. but I'm gonna go into both apple and vodacom this afternoon because this must be sorted out its a serious issue we have on our hands and some uproar needs to be made against those responsible!

Urgent! Need help in deciding data structure to use

Hi all,
I need to implement a restaurant system by which a customer can make a reservation.
I was wondering whether vector would be able to be store such an object, The thing is I don't want a complex data structure. just sumthin simple cos i hardly have anytime left to my submission. sighz...
The thing is I need to able to search based on 2 properties of an object. Eg. I need to search for a reservation based on the customer name and the date he reserved a table.
But I am totally clueless how to search thru a vector based on 2 properties of the object... Would really appreciate some help. Like an example how to so so based on my program. Feelin so lost...This is all I have so far:
class AddReservation
     static BufferedReader stdin = new BufferedReader (new InputStreamReader(System.in));
     //Main Method
     public static void main (String[]args)throws IOException
          String custName, comments;
          int covers, date, startTime, endTime;
          int count = 0;
          //User can only add one reservation at a time
          do
               //Create a new reservation
               Reservation oneReservation=new Reservation();
               System.out.println("Please enter customer's name:");
               System.out.flush();
               custName = stdin.readLine();
               oneReservation.setcustName(custName);
               System.out.println("Please enter number of covers:");
               System.out.flush();
               covers = Integer.parseInt(stdin.readLine());
               oneReservation.setCovers(covers);
               System.out.println("Please enter date:");
               System.out.flush();
               date = Integer.parseInt(stdin.readLine());
               oneReservation.setDate(date);
               System.out.println("Please enter start time:");
               System.out.flush();
               startTime = Integer.parseInt(stdin.readLine());
               oneReservation.setstartTime(startTime);
               System.out.println("Please enter end time:");
               System.out.flush();
               endTime = Integer.parseInt(stdin.readLine());
               oneReservation.setendTime(endTime);
               System.out.println("Please enter comments, if any:");
               System.out.flush();
               comments = stdin.readLine();
               oneReservation.setComments(comments);
               count++;
          while (count<1);
          class Reservation
          private Reservation oneReservation;
          private String custName, comments;
          private int covers, startTime, endTime, date;
          //Default constructor
          public Reservation()
          public Reservation(String custName, int covers, int date, int startTime, int endTime, String comments)
               this.custName=custName;
               this.covers=covers;
               this.date=date;
               this.startTime=startTime;
               this.endTime=endTime;
               this.comments=comments;
          //Setter methods
          public void setcustName(String custName)
               this.custName=custName;
          public void setCovers(int covers)
               this.covers=covers;;
          public void setDate(int date)
               this.date=date;
          public void setstartTime(int startTime)
               this.startTime=startTime;
          public void setendTime(int endTime)
               this.endTime=endTime;
          public void setComments(String comments)
               this.comments=comments;
          //Getter methods
          public String getcustName()
               return custName;
          public int getCovers()
               return covers;
          public int getDate()
               return date;
          public int getstartTime()
               return startTime;
          public int getendTime()
               return endTime;
          public String getComments()
               return comments;
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
class searchBooking
     static BufferedReader stdin = new BufferedReader (new InputStreamReader(System.in));
     public static void main (String[]args)throws IOException
          int choice, date, startTime;
          String custName;
               //Search Menu
               System.out.println("Search By: ");
               System.out.println("1. Date");
               System.out.println("2. Name of Customer");
               System.out.println("3. Date & Name of Customer");
               System.out.println("4. Date & Start time of reservation");
               System.out.println("5. Date, Name of customer & Start time of reservation");
               System.out.println("Please make a selection: ");
               //User keys in choice
               System.out.flush();
               choice = Integer.parseInt(stdin.readLine());
               if (choice==1)
                    System.out.println("Please key in Date (DDMMYY):");
                    System.out.flush();
                    date = Integer.parseInt(stdin.readLine());
               else if (choice==2)
                         System.out.println("Please key in Name of Customer:");
                         System.out.flush();
                         custName = stdin.readLine();
               else if (choice==3)
                         System.out.println("Please key in Date (DDMMYY):");
                         System.out.flush();
                         date = Integer.parseInt(stdin.readLine());
                         System.out.println("Please key in Name of Customer:");
                         System.out.flush();
                         custName = stdin.readLine();
               else if (choice==4)
                         System.out.println("Please key in Date (DDMMYY):");
                         System.out.flush();
                         date = Integer.parseInt(stdin.readLine());
                         System.out.println("Please key in Start time:");
                         System.out.flush();
                         startTime = Integer.parseInt(stdin.readLine());
               else if (choice==5)
                         System.out.println("Please key in Date (DDMMYY):");
                         System.out.flush();
                         date = Integer.parseInt(stdin.readLine());
                         System.out.println("Please key in Name of Customer:");
                         System.out.flush();
                         custName = stdin.readLine();
                         System.out.println("Please key in Start time:");
                         System.out.flush();
                         startTime = Integer.parseInt(stdin.readLine());
                    }

Please stop calling your questions urgent. Everybody's question is urgent to them. Nobody's are urgent to the people who are going to answer them. Calling your questions urgent suggests that you think they are more important than others' (They're not.) and will only serve to irritate those who would help you. It won't get your questions answered any sooner.

Need help on: Automation of Daily Data Load

Hi all,
We need to start our Daily Data load from DAC by Manually. So right now my client has asked us to do Automation of Daily Data Load.
Starting the Daily Data Load Manually(DAC) Process: First we have to check whether the ASCP Plans updated or not
Right now we are checking whether the plans got updated or not, so for this we are using following query
SELECT LTrim(RTrim (compile_designator)),data_completion_date,TO_CHAR(data_completion_date ,'DD-MON-YYYY HH24:MI:SS') FROM apps.msc_plans
WHERE LTrim(RTrim (compile_designator))
in( 'Plan01,'Plan02','Plan03','Paln04') ORDER BY 2 desc
from this query we will able to see whether all the plans got updated or not. From all the Four Plans, two plans will get updated as of Sysdate(mm/dd/yyy) ,Timestamp(hh:mm:ss)(for example i.e. Plan01 08/25/2011 11:20:08 PM, Plan02 08/25/2011 11:45:06 PM) and rest two plans get updated on Sysdate+1(mm/dd/yyy), Timestamp(hh:mm:ss)(for example i.e. Plan03 08/26/2011 12:20:05 AM, Plan04 08/26/2011 12:45:08 AM)
So after checking the plans , we start the Daily Load in DAC manually.
May I know how should I convert my above sql query which I am using for checking the plans updated or not in informatica, so as to automate the Daily Load in informatica level..
Need help.

You cannot replicate what is done with DAC at Informatica level. DAC is a separate Oracle product that orchestrates and manages the ETL load (including Index management, etc). The reason Oracle developed DAC is because it allows you to manage a large scale DW load for a large ERP system. As suggested, you can invoke the DAC execution plan via a command but you cannot replicate everything the DAC does at Informatica level. If this helps, please mark as helpful.

No data in my bw system - need help!

Similar Messages

Maybe you are looking for