No data in report which was saved in Favorites

Hi Experts,
I had saved a report in favorites but report is coming up blank with no data when trying to retrieve it.Pls advice me on this .

Hi Hema,
check whether anybody deleted data in data target, and if data is available in data target, check you define any filters on Query.
try running query with out any selections in selection screen. or try execute Query in t-code RSRT.
Regards,
Daya Sagar

Similar Messages

I added content to a document in Pages on my Mac last night, which was saved to icloud and this morning it was gone. Can I get my precious work back? Thanks

Hello
I added content to a document in Pages on my Mac last night, which was saved to icloud and this morning the additions were gone. Can I get my precious work back? Thanks

Just thought I'd add my solution, I decided to go with WebDAV and I think it actually works better than the iTunes way, the steps are pretty much the same but avoiding the iTunes interface just makes things easier and faster.
I followed this guide but it does have a small mistake in the httpd-dav.conf file, on line 2, where it's WebServer/WebDAV">, it should be <Directory "/Library/WebServer/WebDAV">.
The tricky part is setting permissions which if wrong will give you errors when connecting with the iPad, I opted to set all to Read&Write since my home network has a hardware firewall. Another convenience was to add an alias to the webdav share on the Desktop.
I'm still expecting the call from Apple but even if they fix the iTunes I'm sticking with WebDAV, atleast until I see what's new with iOS5 and iCloud this fall which should bring true sync for documents (I'm hoping that they will offer encryption with my own keys, if not, then I'll probably keep using WebDAV).

Report which was working has suddenly stopped

Hi I have a report which was working and has now just stopped.
Here is the relevant log file extract
rshost!rshost!eec!01/23/2014-12:16:07:: e ERROR: HttpPipelineCallback::SendResponse(): failed writing response.
rshost!rshost!eec!01/23/2014-12:16:07:: e ERROR: Failed with win32 error 0x10DD, pipeline=0x00000000007BFE90.
library!ReportServer_0-2!8c4!01/23/2014-12:19:41:: Call to GetPermissionsAction(/UAT).
library!ReportServer_0-2!1278!01/23/2014-12:19:41:: Call to GetPropertiesAction(/UAT, PathBased).
library!ReportServer_0-2!8c4!01/23/2014-12:19:41:: Call to GetPropertiesAction(/UAT, PathBased).
library!ReportServer_0-2!1278!01/23/2014-12:19:41:: Call to GetSystemPermissionsAction().
library!ReportServer_0-2!8c4!01/23/2014-12:19:41:: Call to ListChildrenAction(/UAT, False).
library!ReportServer_0-2!1278!01/23/2014-12:19:41:: Call to GetSystemPropertiesAction().
library!ReportServer_0-2!1278!01/23/2014-12:19:41:: Call to GetSystemPropertiesAction().
library!ReportServer_0-2!8c4!01/23/2014-12:19:41:: Call to GetSystemPropertiesAction().
library!ReportServer_0-2!8c4!01/23/2014-12:19:41:: Call to GetSystemPropertiesAction().
library!ReportServer_0-2!1278!01/23/2014-12:19:44:: Call to GetPermissionsAction(/UAT/Copy (2) of Givex Members Store And Other Stores Visited).
library!ReportServer_0-2!1278!01/23/2014-12:19:44:: Call to GetSystemPropertiesAction().
library!ReportServer_0-2!1278!01/23/2014-12:19:44:: Call to GetPropertiesAction(/UAT/Copy (2) of Givex Members Store And Other Stores Visited, PathBased).
library!ReportServer_0-2!1278!01/23/2014-12:19:44:: Call to GetSystemPermissionsAction().
library!ReportServer_0-2!1278!01/23/2014-12:19:44:: Call to GetSystemPropertiesAction().
library!WindowsService_0!a14!01/23/2014-12:19:45:: i INFO: Call to CleanBatch()
library!WindowsService_0!a14!01/23/2014-12:19:46:: Using folder C:\Program Files\Microsoft SQL Server\MSRS10_50.MSSQLSERVER\Reporting Services\RSTempFiles for temporary files.
library!WindowsService_0!a14!01/23/2014-12:19:46:: i INFO: Cleaned 0 batch records, 0 policies, 1 sessions, 0 cache entries, 2 snapshots, 10 chunks, 0 running jobs, 0 persisted streams, 3787 segments, 3787 segment mappings, 0 edit sessions.
library!WindowsService_0!a14!01/23/2014-12:19:46:: i INFO: Call to CleanBatch() ends
library!ReportServer_0-2!1080!01/23/2014-12:19:55:: Call to GetPermissionsAction(/UAT/Copy (2) of Givex Members Store And Other Stores Visited).
library!ReportServer_0-2!1080!01/23/2014-12:19:55:: Call to GetSystemPropertiesAction().
library!ReportServer_0-2!1080!01/23/2014-12:19:55:: Call to GetPropertiesAction(/UAT/Copy (2) of Givex Members Store And Other Stores Visited, PathBased).
library!ReportServer_0-2!1080!01/23/2014-12:19:55:: Call to GetSystemPermissionsAction().
library!ReportServer_0-2!1080!01/23/2014-12:19:56:: Call to GetSystemPropertiesAction().
library!ReportServer_0-2!1080!01/23/2014-12:19:56:: Call to GetPermissionsAction(/UAT/Copy (2) of Givex Members Store And Other Stores Visited).
library!ReportServer_0-2!9b0!01/23/2014-12:19:56:: Call to GetSystemPropertiesAction().
library!ReportServer_0-2!9b0!01/23/2014-12:19:56:: Call to GetPropertiesAction(/UAT/Copy (2) of Givex Members Store And Other Stores Visited, PathBased).
library!ReportServer_0-2!1080!01/23/2014-12:19:56:: Call to GetSystemPermissionsAction().
library!ReportServer_0-2!9b0!01/23/2014-12:19:56:: Call to GetSystemPropertiesAction().
library!ReportServer_0-2!1080!01/23/2014-12:19:56:: i INFO: RenderForNewSession('/UAT/Copy (2) of Givex Members Store And Other Stores Visited')
webserver!ReportServer_0-2!1080!01/23/2014-12:23:16:: i INFO: Processed report. Report='/UAT/Copy (2) of Givex Members Store And Other Stores Visited', Stream=''
rshost!rshost!344!01/23/2014-12:25:46:: e ERROR: HttpPipelineCallback::SendResponse(): failed writing response.
rshost!rshost!344!01/23/2014-12:25:46:: e ERROR: Failed with win32 error 0x0057, pipeline=0x00000000007BFA40.
httpruntime!ReportManager_0-1!344!01/23/2014-12:25:46:: e ERROR: Failed in BaseWorkerRequest::SendHttpResponse(bool), exception=System.ArgumentException: Value does not fall within the expected range.
at Microsoft.ReportingServices.HostingInterfaces.IRsHttpPipeline.SendResponse(Void* response, Boolean finalWrite, Boolean closeConn)
at ReportingServicesHttpRuntime.BaseWorkerRequest.SendHttpResponse(Boolean finalFlush)
library!ReportManager_0-1!344!01/23/2014-12:25:46:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.ReportServerHttpRuntimeInternalException: RsWorkerRequest::FlushResponse., Microsoft.ReportingServices.Diagnostics.Utilities.ReportServerHttpRuntimeInternalException:
An internal or system error occurred in the HTTP Runtime object for application domain ReportManager_MSSQLSERVER_0-1-130349526093939666. ---> System.ArgumentException: Value does not fall within the expected range.
at ReportingServicesHttpRuntime.BaseWorkerRequest.SendHttpResponse(Boolean finalFlush)
at ReportingServicesHttpRuntime.RsWorkerRequest.FlushResponse(Boolean finalFlush)
--- End of inner exception stack trace ---;
rshost!rshost!344!01/23/2014-12:25:46:: e ERROR: HttpPipelineCallback::SendResponse(): failed writing response.
rshost!rshost!344!01/23/2014-12:25:46:: e ERROR: Failed with win32 error 0x10DD, pipeline=0x00000000007BFA40.
Kind Regards
William Walley

Hi Alisa,
I have increased the timeout to 250000, and it is still throwing an error, here are the details from ExecutionLog2 view
InstanceName ReportPath
UserName ExecutionId
RequestType Format
Parameters ReportAction
TimeStart TimeEnd
TimeDataRetrieval TimeProcessing
TimeRendering Source
Status ByteCount
RowCount AdditionalInfo
SNK-SQL04\MSSQLSERVER /Marketing/Givex Members Store And Other Stores Visited
SPACENK\ww vgdvzym3la13m345rjyhf3jz
Interactive RPL
CompanyId=1&StoreId=34 Render
2014-02-03 10:13:12.030 2014-02-03 10:20:37.713
281028 45393
119026 Live
rsSuccess 361819673
266850 <AdditionalInfo><ProcessingEngine>2</ProcessingEngine><ScalabilityTime><Pagination>0</Pagination><Processing>0</Processing></ScalabilityTime><EstimatedMemoryUsageKB><Pagination>38124</Pagination><Processing>196375</Processing></EstimatedMemoryUsageKB><DataExtension><SQL>1</SQL></DataExtension></AdditionalInfo>

Calling java class from PLSQL that returns date/time a file was saved

Does anybody know, is there a java class I can compile into Oracle DB, and call from PLSQL that returns me the date/time a file was saved.
As far as I'm aware this cannot be achieved using UTL_FILE.
Please advise
Thanks
Warren

I found this thread from before that might be helpful
how to connect to UNIX OS from oracle stored procedure

Project Start Date – modification after project was saved.

I created new project with a start date 01/April/2015 and saved it. Next, I change the start date to 14/April/2015 in the setup.
However still in statistics windows I see the start date as 01/April/2015. Additionally, every new task has start date 01/April/2015.
Could you please advise me how can I change that?
https://social.technet.microsoft.com/Forums/getfile/644409
MS Project Standard 2013

Thank you for your prompt reply.
1.Firstly I set up project start date as 01/04/2015 in Project, Project Information and in File, Project Information and save document.
2. Afterwards, I modified start date into 14/04/2015 in the same places.
However, the date in Project, Project Information - Statistics was still 01/04/2015 (please check screenshot).
3. But finally, after several openings and closing of the document the date in Statistics is correct (hard to say what is the reason).

Adding new column in an existing report which was build using Union

While working in OBIEE 11g I encounter an issue.
My existing report was build using UNION at Criteria Tab in Analysis. Now I have a requirement to add a new column into the same report. For each criteria I have added the new column but when I go back to the "Result Columns". I see a new field added but it is not allowing me to open or edit column properties for that new column & at the same time it is not allowing me to navigate to other tabs like Results, Promts, and Advanced.
I don’t want to build this report from scratch. Is there any workaround to get it resolved?

Hi,
Just check it once the new added column data types are mismatched or not?
and the new added column should be navigated into excluded section, so u should edit the report and dragged into the table column section.
Thanks..

How to deploy Reports which is saved as JSP in Reports 9i , in Tomcat serve

Hi,
I have saved rdf as JSP in Reports 9i and try to deploy in Tomcat server. Initially i got some error regarding taglib, RWException.class. But i put Oracle9IAS classes in /WEB_INF/CLASS folder so able to run JSP.
I am Giving URL As
http://localhost:8080/examples/jsp/IN_FREQUENT_DIALLEDNUMBER.jsp?server=HTP&userid=eulogy/eulogy@eulfenny&destype=cache&desformat=HTML&paramform=yes
If i am not giving Server=HTP, then getting ERROR
Reports Error Page
Wed Feb 18 14:34:09 IST 2004
javax.servlet.jsp.JspException: REP-51000: Reports Server name is not specified
If I am giving Server=HTP
Reports Error Page
Wed Feb 18 14:35:15 IST 2004
javax.servlet.jsp.JspException: com.sun.corba.se.internal.Interceptors.PIORB
I have placed this class in /web-IF/Class folder, After all i am getting this error.
But My requirment is to run the Jsp without giving Server=HTP
Any One can suggest, It is possible to run this JSP in Tomcat without Using Reports Server(9IAS BC4J instance).
Appreciate all your reply & Thanks In Advance.
Regards
Rajeev

H,
reports cannot be migrated at this time, indeed.

I encountered a bit of difficulty opening a .Tif file which was saved in CS5?

This problem occured three times before the file finally did open in CS6.

I am using an hp laptop dv7t, it runs win 7 64bit and has an intel graphics co-processor.
The machine has a total of 6 gig of ram.
The processor is an i5 cpu M460 @ 2.53GHz.
The fact that the system had difficulty opening the .tif it has opened without further problems after re-boot several times. I've opened approximately 50more .tif files without incident.

How to find an SSRS report subscription was executed 3 days back and sent an Email to the requested person or group?

Hi All,
I got complain that one of my reports which was subscribed from SSRS Report Manager could not delivered to targeted people 3 days back.
I want to to check that Email was sent or not So I wrote below query but I think table will be over written on each execution of subscription and cannot see the history. I can see only the latest data.
SELECT A.NAME,B.Description,B.LastStatus,B.LastRunTime
FROM [dbo].[Catalog] A
INNER JOIN [dbo].[Subscriptions] B ON A.ItemID=B.Report_OID
WHERE TYPE=2
AND NAME='REPORT_NAME'
AND B.LastStatus LIKE '%EMAIL ID%'
AND B.LastRunTime>Getdate()-1
ORDER BY B.LastRunTime
There is another query which says that report was rendered by SUBSCRIPTION and have no track that Email was sent or not.
--Query to find out how a report was execute
SELECT * FROM EXECUTIONLOG3
WHERE REQUESTTYPE='SUBSCRIPTION'
AND ITEMPATH LIKE '%REPORT NAME'
ORDER BY TIMESTART DESC
There is any way to track this?
https://msdn.microsoft.com/en-us/library/ms159110.aspx
http://blogs.msdn.com/b/deanka/archive/2009/01/13/diagnosing-and-troubleshooting-subscriptions.aspx
Thanks Shiven:) If Answer is Helpful, Please Vote

Hi S Kumar Dubey,
According to your description, you want to find the failed subscription report and resent the report to users again.
In this scenario, you can run the query below to find the failed subscription.
use ReportServer
go
SELECT C.Name, S.LastRunTime, S.LastStatus, S.Description
FROM Subscriptions AS S
LEFT OUTER JOIN [Catalog] AS C
ON C.ItemID = S.Report_OID
WHERE LEFT (S.LastStatus, 12) != 'Mail sent to'
AND LEFT (S.LastStatus, 12) != 'New Subscrip'
Then you can execute the code with jobstep command below to find the corresponding SQL Agent Jobs for failed subscription, then execute the job to send the email again.
select 'exec sp_start_job @job_name = ''' + cast(j.name as varchar(40)) + ''''
from msdb.dbo.sysjobs j
join msdb.dbo.sysjobsteps js on js.job_id = j.job_id
join [ReportServer].[dbo].[Subscriptions] s on js.command like '%' + cast(s.subscriptionid as varchar(40)) + '%'
where s.LastStatus like 'Failure sending mail%';
Reference:
SSRS Failed Subscription Notifications
Re-running SSRS subscription jobs that have failed
If you have any question, please feel free to ask.
Best regards,
Qiuyun Yu
Qiuyun Yu
TechNet Community Support

Displaying an ALV report using a saved layout.

Dear friends
In ALV report there are 2 standard buttons.
One says "select Layout CTRLF9" and another one says "Save Layout CTRLF10".
Using this I can select the layout and save it using some variable.
Now I want to create a field in the main screen so that when
I enter this saved name and run the ALV report, it should show
report using the layout I entered selected (which was saved earlier).
Where will this variable get saved and how can i access this and make it
display using this layout.
Any feed back will be greatly appreciated.
Thanks
Ram

Hi Ram,
Try this code..
BR
Rakesh
**// INITIALIZATION.
initialization.
perform initialize_variables.
**// AT SELECTION-SCREEN.
at selection-screen.
if p_vari is initial.
    variant_init.
endif.
perform check_email.
at selection-screen on value-request for p_vari.
alv_f4_for_variant.                                       "#EC
at selection-screen on p_vari.
alv_pai_of_selection_screen.
                              M A C R O S                            *
define variant_init.
clear: disvariant,
         vartext.
if v_pgm is initial.
    disvariant-report     = sy-cprog.
else.
    disvariant-report     = v_pgm.
endif.
end-of-definition.
define alv_f4_for_variant.
variant_init.
call function 'REUSE_ALV_VARIANT_F4'
       exporting
            is_variant = disvariant
            i_save     = xsave
       importing
            e_exit     = i_exit
            es_variant = disvariant
       exceptions
            not_found = 2.
if sy-subrc = 2.
    message id sy-msgid type 'S'      number sy-msgno
            with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
elseif i_exit = space.
    p_vari = disvariant-variant.
    vartext = disvariant-text.
    refresh i_dynpread.
    i_dynpread-fieldname = 'VARTEXT'.
    i_dynpread-fieldvalue = disvariant-text.
    append i_dynpread.
    call function 'DYNP_VALUES_UPDATE'
         exporting
              dyname     = v_pgm
              dynumb     = '1000'
         tables
              dynpfields = i_dynpread.
    if sy-subrc <> 0.
      message id sy-msgid type sy-msgty number sy-msgno
              with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    endif.
else.
    variant_init.
endif.
end-of-definition.
define alv_pai_of_selection_screen.
if not p_vari is initial.
    move p_vari to disvariant-variant.
    call function 'REUSE_ALV_VARIANT_EXISTENCE'
         exporting
              i_save     = xsave
         changing
              cs_variant = disvariant.
    vartext = disvariant-text.
else.
    variant_init.
endif.
end-of-definition.

Upgration from 6.5 to XI 3.1 doesn't show up data in report

Hi Expert,
I have a report which was in BO 6.5 version and this is upgraded to XI 3.1.
When i refresh the report after upgration, the report going into structure mode instead result mode. When i try to convert that into result mode, the system is hanging.
How can we rectify this issue ? Any help is highly appriciated.
Regards,
Suresh

Try:
String sqlStmt = ("INSERT INTO custInfo (fName, lName, phoneNumber, custDayCalled, custTimeCalled, custMessage) VALUES ('" + fName + "', '" + lName + "', '" + phNumber + "', '" + dayCalledIn + "', '" + timeCalledIn + "', '" + message.getText() + "')");

Regarding Activity Data Collector Report..

Hi All,
My portal doesnt have Activity data collector report which needs application as "com.sap.portal.activitydatacollector".
Pl tell me where should i find it or do i have to install some patch or package.
thanks
Piiyush

Hi all,
Please see [SAP Note 1178889|https://service.sap.com/sap/support/notes/1178889|Link] for information on how to use ADC with NW04 SPS21.
Also see [Release Notes of NW04s SPS14|http://help.sap.com/saphelp_nw70/helpdata/EN/46/e28f3aeb4168dfe10000000a114a6b/frameset.htm], for availability info on NW04s
Best regards

Popularity trend/usage report is not working in sp2013. Data was not being processed to EVENT STORE folder which was present under the Analytics_GUID folder.

Hi
I am working in a sharepoint migration project. We have migrated one SharePoint project from moss2007 to sp2013. Issue is when we are clicking on Popularity trend > usage report, it is throwing an error.
Issue: The data was not being processed to EVENT STORE folder which was present under the
Analytics_GUID folder. Also data was not present in the Analytical Store database.
In log viewer I have found the bellow error.
HIGH -
SearchServiceApplicationProxy::GetAnalyticsEventTypeDefinitions--Error occured: System.ServiceModel.Security.MessageSecurityException: An unsecured or incorrectly
secured fault was received from the other party.
UNEXPECTED - System.ServiceModel.FaultException`1[[System.ServiceModel.ExceptionDetail,
System.ServiceModel, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089]]: We're sorry, we weren't able to complete the operation, please try again in a few minutes.
HIGH - Getting Error Message for Exception System.Web.HttpUnhandledException
(0x80004005): Exception of type 'System.Web.HttpUnhandledException' was thrown. ---> System.ServiceModel.Security.MessageSecurityException: An unsecured or incorrectly secured fault was received from the other party.
CRITICAL - A failure was reported when trying to invoke a service application:
EndpointFailure Process Name: w3wp Process ID: 13960 AppDomain Name: /LM/W3SVC/767692721/ROOT-1-130480636828071139 AppDomain ID: 2 Service Application Uri: urn:schemas-microsoft-
UNEXPECTED - Could not retrieve analytics event definitions for
https://XXX System.ServiceModel.FaultException`1[System.ServiceModel.ExceptionDetail]: We're sorry, we weren't able to complete the operation, please try again in a few minutes.
UNEXPECTED - System.ServiceModel.FaultException`1[[System.ServiceModel.ExceptionDetail,
System.ServiceModel, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089]]: We're sorry, we weren't able to complete the operation, please try again in a few minutes.
I have verified few things in server which are mentioned below
Two timer jobs (Microsoft SharePoint Foundation Usage Data Processing, Microsoft SharePoint Foundation Usage Data Import) are running fine.
APPFabric Caching service has been started.
Analytics_GUID folder has been
shared with
WSS_ADMIN_WPG and WSS_WPG and Read/Write access was granted
.usage files are getting created and also the temporary(.tmp) file has been created.
uasage logging database for uasage data being transported. The data is available.
Please provide pointers on what needs to be done.

Hi Nabhendu,
According to your description, my understanding is that you could not use popularity trend after you migrated SharePoint 2007 to SharePoint 2013.
In SharePoint 2013, the analytics functionality is a part of the search component. There is an article for troubleshooting SharePoint 2013 Web Analytics, please take a look at:
Troubleshooting SharePoint 2013 Web Analytics
http://blog.fpweb.net/troubleshooting-sharepoint-2013-web-analytics/#.U8NyA_kabp4
I hope this helps.
Thanks,
Wendy
Wendy Li
TechNet Community Support

Adds entity value with which report was saved to all Combo Box in th report

Hi All,
We have 5 combo box related to Entity dimension in one of the WA 11.1.2 reports which we migrated from 7. The different combo boxes had different entity member selection and lists their children.
The issue here is when we change the entity to one particular value in one of the combo boxes and save the report in studio, close and re-open, the report opens with the entity value with which it was saved in that combo box, also additionally it puts this entity value in other combo boxes also along with their existing values.
We want the other combo boxes to retain only their value which was existing. Can anybody help with this.
Thanks,
Unni

Hi,
I believe- This happens because- You might be re-using the same DataSource, ReportDataSrc1* that you created for the very first object +(Spreadsheet/combo/...whatever)+ on the Web Analysis report that you're referring to.
I'm surprised why you've 5 different combo boxes for the same dimension on a single report. If they're analyzed compartmentally, creating multiple DataSources is a way out.
Let us know incase you've any questions.
- Natesh

How do you fill in a form that was saved as a template? When I try, the "template" shifts, which is not how a template should work!

How do you fill in a form that was saved as a template? When I try, the "template" shifts, which is not how a template should work!
Templates, as I understand them, are fixed; you can "fill them in" without shifting them. Yet, I've saved doc as a template AND it shifts. Argh!

Thanks for your response.
I've managed to fix it but I wouldn't recommend the following as I'm sure its unsupported and I'll probably have problems down the line
On the host
* mv /etc/zones /etc/zones.bak
* reboot single user
* apply kernel patch (the one that ultimately I had to get on and which was giving pre-req dependency errors when running zones)
* create a new zone now that host system is all up to date
* Copy the operating system directories of the new zone (the one that's all patched) over the troublesome zone (the one that can't take the patch). Take backups first
* cd /zones/new-zone/root
* find sbin -print | cpio -pudm /zones/bad-zone/root
* find usr -print | cpio -pudm /zones/bad-zone/root
* find lib -print | cpio -pudm /zones/bad-zone/root
* cd /zones/new-zone/root/var
* find sadm -print | cpio -pudm /zones/bad-zone/root/sadm (this copies patches and pkgs directories and I'm sure a lot of other stuff that I didn't want)
* mv /etc/zones.bak /etc/zones
* reboot host
* boot the old zone up. It should now have up to date patches
I'm sure there are real no-no's in taking this approach but it seems to have worked for me. I'll update if I find there are some horrors down the line
Edited by: paul_xedos on Mar 25, 2010 4:07 AM

No data in report which was saved in Favorites

Similar Messages

Maybe you are looking for