No data in RSA3 for 2LIS_11_VAITM and 2LIS_11_VAHDR

hello experts,
i want to extract data from 2LIS_11_VAHDR and 2LIS_11_VAITM but dont see any data in RSA3.
I have already activated the datasource in RSA5 and LBWE. After running the setup tables using OLI7BW i still dont see any data in RSA3.
Pls advice... is there something i am missing?
thanks
Jagpreet

Use SE16 and verify that there is data in the MC11VA0HDRSETUP table. If there is no data, then your setup tables were not updated (or the setup extracted no records).
In RSA3, make sure you select Update Mode of "C" or "F". This will check data from the setup tables.
Hope this helps.

Similar Messages

No data in RSA3 for 2lis_11_vaitm

hi,
I am testing the extractor 2lis_11_vaitm and there is no data in RSA3. i have checked the sales orders and there is data. please let me know what the problem may be.
Many thanks
Emil

Emil,
Here are the steps.
1) Use transaction LBWG to delete the contents of the setup table for application 11.
2) Use transaction OLI7BW to perform the statistical setup of sales documents (make sure to block all orders).
3) While setup job is running, use transaction SA38 to run progrm RMBWV311. This will move the V3 updates to the delta queue so as not to double up this data.
4) Now in RSA3, execute the 2LIS_11_VAITM datasource.
Abdul

IW31/32- Change Date Restriction choices for "StartPoint" and "End"

Hello,
In IW31/32> Operation tab> then "Dates" screen.
Is there a way to change Date Restriction choices for "StartPoint" and "End."
Start Point: there are 4 choices: Must Start on, Cannot start before, cannot start after, start from resource planning
End: Must finish on, Cannot finish before, finish not later, finish from confirmation.
We want to limit the choice to 2 optiions on Start and End/ in addtion change the text.
Is this possible.
Thanks,

Hi,
No its not possible to accomplish this in standard using configuration functionality.
You may able to accomplish restricting the values on the drop down through the implicit enhancement functionality available in ECC 6.0.
You will have to make a screen modification to make the associated start point/ end point key text editable.
Regards
Narasimhan

Unable to find data in RSA3 for particular fields2lis_04_p_arbpl datasource

I am working with datasource 2lis_04_p_arbpl to construct Yield Report. I have a field GAMNG(Target Quantity) in the table AFKO, so I added it to the communication structure and activated it. I also want the field IGMNG(confirmed quantity) which is available in the table AFKO but not appearing in the pool tables of ARBPL datasource, so I have done datasource enhancement and obtained the field in the datasource. When I am checking for the data in RSA3, unable to find data(zero values) for both the fields.
Edited by: bhagav on Jan 5, 2012 1:20 PM

Hi ,
Please make sure that you are doing the extractor check in Update mode 'Full' .If the setup tables are filled then this should pick the data for the 2 newly added fields .
check and update accordingly later .
Thanks
Kamal Mehta

Different number of records in RSA3 for Full and INIT

Hi All,
I am about to load the data from 0FI_GL_4 and checked it in RSA3 for the number of records. It returned different number of records when I run the extract with options 'F' and 'C'. Why is it so? This is the first time I am loading the data into BW for this datasource. I would expect the number of records to be same if I do either a full extract or an init but surprised by seeing different number of records.
Best Regards,
James.

Hi James,
Probably it's because of the time stamps stored in table BWOM2_TIMEST.
If you run a delta init and than a delta update then the number of the records should match with the record of the full update.
You can find some more info about table BWOM2_TIMEST here:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/a7f2f294-0501-0010-11bb-80e0d67c3e4a#527,7,Timestamp%20Mechanism:%20New%20documents
Bye,
Zsolt

Oracle data guard configuration for primary and standby db_name

I am working on configuring an active data guard for one primary DB and one standby DB. I have a few questions:
1. Can I use different db_name, db_unique_name and instance_name for primary and standby. For example: primary(db_name, db_unique_name and instance_name)=chicago. When I create standby DB with Rman backup and copy of pfile and control file from primary DB or use Grid control to create standby database. Oracle document or Grid control all keep standby db_name=chicago. Only make standby db_unique_name and instance_name=boston. Due to my application system condition, I want to make db_name=boston, not keep it as the same as primary=chicago. Is this valid configuration?
2. In primary datafiles, application system generate datafile name like this: hr_chicago_01.dbf, fn_chicago_01.dbf. When I move datafiles to standby server, if I plan to use db_name=boston for standby DB, can I rename datafiles as
hr_boston_01.dbf, fn_boston_01.dbf? In this way, datafile name match up with db_name. but I will create standby log group and members on primary and standby identically. If in future switching over, DB will not have problems.
3. If I don't use primary DB backup. Instead, I copy all datafiles, redo_log files (no control files) to standby. Then "alter database backup controlfile to trace" from promary and also " create pfile='/xxx/initSTANDBY.ora' from primary. Then modify init.ora and controlfile. Then run control.sql to bring standby DB up. After that, configure redo log shipping and apply with data guard or SQL. Is this a acceptable way to create physical standby DB?
Please advise your comments. Thanks in advance.

I want to make db_name=boston, not keep it as the same as primary=chicago. Is this valid configuration?NO. DB_NAME must be the same ("chicago") at both sites. The Standby will be using a different DB_UNIQUE_NAME (e.g. "boston") and can be using a different Instance name / SID (e.g. "boston").
can I rename datafiles Yes. The database file names can be changed.
If I don't use primary DB backup. Instead, I copy all datafiles, redo_log files (no control files) to standbyWhat is the difference between the first sentence (a backup of the primary) and the second sentence (a copy of the primary) ? A Copy is a backup.
Are you intending to differentiate between an RMAN Backup and a User-Managed (aka "scripted") backup ?
Normally, for DataGuard, tou can use non-RMAN methods to copy the database but there's no value add in this.
You'd still have to setup DataGuard ! (and I wonder if you'd have complications setting up Active DataGuard).
But remember that you MUST create the Standby controlfile from the Primary and copy it over to your Standby -- particularly as you are planning to use DataGuard. This is not created by 'alter database backup controlfile to trace' , but by 'ALTER DATABASE CREATE STANDBY CONTROLFILE AS 'filename''
Hemant K Chitale

Read data from MDM For Lookup and Flat table using MDM ABAP API

Hi,
I have requriment to read data from MDM from FLAT and Lookup table using MDM ABAP API. My design is like this ,
I have one ITEMS (Main table in MDM) and inside that i have one Lookup flat table ITEM_TYPE , my requriment is to read Item number and its related Item type.
From ABAP.
Please help if any body has any idea.
Regards,
Shyam

HI Guys,
I found my solution by myself. Below is the solution , hope this will help others:-
Retrieve data from MDM using MDM ABAP API.
Step- 1. Create structure in SAP with the same name as that of MDM field code for MDM Main table.
Step-2. Create another structure in SAP having all lookup fields of MDM , fieldname in ECC must be same as that of MDM field
code.
Step-3.Create structure in SAP for individual lookup field(Single Field only)   with the same name as MDM Field code.
Step-4.
DATA: IT_QUERY            TYPE STANDARD TABLE OF MDM_QUERY, "MDM_QUERY_TABLE,
      WA_QUERY            TYPE MDM_QUERY,
      WA_CDT_TEXT         TYPE MDM_CDT_TEXT,
      IT_RESULT_SET_KEY   TYPE MDM_SEARCH_RESULT_TABLE,
      WA_RESULT_SET_KEY   TYPE MDM_SEARCH_RESULT,
      WA_STRING           TYPE STRING.
DATA:<Internal table> TYPE STANDARD TABLE OF <SAP Str Having all LOOKup Fields>
DATA: :<Internal table>TYPE STANDARD TABLE OF <SAP Str one LOOKup field>,
     <Workarea> LIKE LINE OF :<Internal table>.
*PASS LOGICAL OBJECT NAME.
V_LOG_OBJECT_NAME = 'Logical object name defined in Customization'.
Define logon language, country & region for server
WA_LANGUAGE-LANGUAGE = 'eng'.
WA_LANGUAGE-COUNTRY = 'US'.
WA_LANGUAGE-REGION = 'USA'.
TRY.
    CREATE OBJECT LR_API
      EXPORTING
        IV_LOG_OBJECT_NAME = V_LOG_OBJECT_NAME.
ENDTRY.
CONNECT to repository. Apply particular logon language info
CALL METHOD LR_API->MO_ACCESSOR->CONNECT
EXPORTING
    IS_REPOSITORY_LANGUAGE = WA_LANGUAGE.
*NOW PASS ITEM NO AND GET KEY FROM MDM.
CLEAR WA_QUERY.
WA_QUERY-PARAMETER_CODE = <MDM FIELD CODE>. "Field code
WA_QUERY-OPERATOR        = 'EQ'. "Contains
WA_QUERY-DIMENSION_TYPE = 1. "Field search
WA_QUERY-CONSTRAINT_TYPE = 8. "Text search
WA_STRING                = <Field Value>.
GET REFERENCE OF WA_STRING INTO WA_QUERY-VALUE_LOW.
APPEND WA_QUERY TO IT_QUERY.
CLEAR WA_QUERY.
*PASS ITEM NUMBER AND GET RELATED KEY FROM MDM.
TRY.
    CALL METHOD LR_API->MO_CORE_SERVICE->QUERY
      EXPORTING
        IV_OBJECT_TYPE_CODE = <MDM Main Table>
        IT_QUERY            = IT_QUERY
      IMPORTING
        ET_RESULT_SET       = IT_RESULT_SET_KEY.
CATCH CX_MDM_COMMUNICATION_FAILURE .
CATCH CX_MDM_KERNEL .
CATCH CX_MDM_NOT_SUPPORTED .
CATCH CX_MDM_USAGE_ERROR .
CATCH CX_MDM_PROVIDER .
CATCH CX_MDM_SERVER_RC_CODE .
ENDTRY.
Pass record id into keys.
LOOP AT IT_RESULT_SET_KEY INTO WA_RESULT_SET_KEY.
WA_KEYS = WA_RESULT_SET_KEY-RECORD_IDS.
ENDLOOP.
WA_RESULT_SET_DEFINITION-FIELD_NAME = <Look field name>.
APPEND WA_RESULT_SET_DEFINITION TO IT_RESULT_SET_DEFINITION.
CALL METHOD LR_API->MO_CORE_SERVICE->RETRIEVE
EXPORTING
    IV_OBJECT_TYPE_CODE      = <MDM Main Table>
    IT_RESULT_SET_DEFINITION = IT_RESULT_SET_DEFINITION
    IT_KEYS                  = WA_KEYS
IMPORTING
    ET_RESULT_SET            = IT_RESULT_SET.
LOOP AT IT_RESULT_SET INTO
        WA_RESULT_SET.
*PASS KEYS INTO MAIN TABLE TO GET Structure for FALT or Look up Table
TRY.
      CALL METHOD LR_API->MO_CORE_SERVICE->RETRIEVE_SIMPLE
        EXPORTING
          IV_OBJECT_TYPE_CODE = <MDM Main Table>
          IT_KEYS             = WA_KEYS
        IMPORTING
          ET_DDIC_STRUCTURE =<SAP Strct having all Look up fileds of MDM>
ENDTRY.
LOOP AT <SAP Strct having all Look up fileds of MDM> INTO <Work area>.
    CLEAR WA_KEYS.
    APPEND <Work area>-field name TO WA_KEYS.
    CALL METHOD LR_API->MO_CORE_SERVICE->RETRIEVE_SIMPLE
      EXPORTING
        IV_OBJECT_TYPE_CODE = <MDM Lookup table name>
        IT_KEYS             = WA_KEYS
      IMPORTING
        ET_DDIC_STRUCTURE   = <Single Structure in SAP For Lookup field>.
    READ TABLE <Single Structure in SAP For Lookup field>. INTO <Work Area> INDEX 1.
Here you can get the value of realted lookup fields associated with main table data.
ENDLOOP.
ENDLOOP.
LR_API->MO_ACCESSOR->DISCONNECT( ).
Edited by: Shyam Babu Sah on Nov 24, 2009 4:52 AM

Netweaver Data base instances for Java and ABAP

Hello Experts,
Please help me to understand how the two technology stacks of SAP WAS (Java and ABAP) are configured to use underline data base in Netweaver.
Is it manadatory to have two separate data base schemas, one for ABAP applications and other for Java applications in the Netweaver?
If yes..the any idea about what are those schema differences??
- Rajan

Hello Krishna,
Thanks for the reply.
Is there any way I can access these shemas? Are they the same by structure or there are major differences?
My requirement is to build a common schema out of these two and have the data from these two schemas to be consolidated in the new schema.
Any help will be greatly appreciated.
- Rajan

Date Span - Validation for start and end date parameters in Crystal reports

Hi,
I am new here and am unsure if this is the right place to post this issue. If so, I apologize for that.
I am working on Crystal Reports 12 and don't know if it is possible; to validate the parameters - Start Date and End Date are within a specific span of time. For Eg. Start Date and End Date should be within 6 months or Start Date should be a future date.
Can we prompt that parameters entered are invalid and have users re-enter it?
I will really appreciate any help into this issue.
Thanks Much,
RP

Hi,
Well, it is not possible to validate the date/datetime values in the prompt window, however there are other alternatives.
One of them is to create an Alert with the condition:
datediff("m",Minimum({?DateParameter}),Maximum({?DateParameter})) > 6
//This is to check if the start date and the end date are within 6 months
Another way of doing this is by displaying a message on the Report Header and suppressing all other sections if the date range values do not meet the condition.
Hope this helps!
-Abhilash

I'm having problems manipulating array data within a for loop, and extracting the required sub-arrays generated.

Hi,
I'm using labVIEW V5.1
I'm trying to generate 10 1D arrays, the first array is initialized to all zeroes, then I have set up a for loop which shifts the first element by 1, then a random number is placed into the first element position. I am using a shift register to feed back in the newly generated array into the start of the loop.
By the end of the each loop I want to be able to use the array generated in an algorithm outside the loop. However I only want the Nx1 array that has just been generated.
Unfortunately, I cannot figure out how to resize, reshape or index the output array to do this.
I would like the loop to
give me out a 1D array after each iteration.
Any help would be greatly appreciated.

I hope I've understood your problem.
First your vi was lacking of the sub-vi working as shift register, I've replaced it with the rotate function.
The indexing of your arrays create a 2D array whose rows are your 1D array.To pick only one of them you have to use the index array function and select which one you want.
To use your temporary data in another part of your application you should use a local variable of array2.
I did it in a separated while loop That I syncronized with the for loop using occurrence, in this way the while loop runs each time a new value is inserted in array2 (each loop of the for loop structure).
If you don't need this syncronization just get rid of occurrence functions.
I place a delay in the for loop to show what happens when running.
Hope it was helpful.
Alberto Locatelli
Attachments:
array_test_v3.vi ‏35 KB

Date Range Calculations for gaps and overlaps

Oracle version: 11.2.0.3
Platform : Linux
Empno       position    start_dt       end_dt
     1                X            01/01/2008 01/02/2010
     1                Y           01/02/2009 12/31/2012
     1                X           02/01/2012   04/01/2013
     1                Z           5/01/2012    12/31/2012
     1                Y           05/01/2013 present
I need to find the exact time period the employee worked for the company in a particular position. The query should be able to calculate the overlap/gaps accordingly
For example in this case the result should be
Empno position   days    Total_Days
1             x              1156        2943
1             y              1543        2943
1             z               244        2943
Thanks
Kevin

Hi, Kevin,
Assuming you do have overlaps (and depending on what you mean by "overlaps") here's one way to handle them:
WITH got_new_grp AS
   SELECT empno, position, start_dt
   ,       NVL (end_dt, TRUNC (SYSDATE)) AS end_dt
   ,       CASE
               WHEN MAX (end_dt)
                         OVER ( PARTITION BY empno, position
                                ORDER BY      start_dt
                                ROWS BETWEEN UNBOUNDED PRECEDING
                                     AND      1         PRECEDING
                              ) < start_dt
               THEN 1
               ELSE 0
           END AS new_grp
    FROM   table_x
-- WHERE ... -- If you need any filtering, put it here
, got_grp AS
    SELECT empno, position, start_dt, end_dt
    ,       SUM (new_grp) OVER ( PARTITION BY empno, position
                                 ORDER BY      start_dt
                               ) AS grp
    FROM    got_new_grp
SELECT DISTINCT
          empno, position
,         SUM (MAX (end_dt) - MIN (start_dt))
              OVER (PARTITION BY empno, position)   AS days
,         SUM (MAX (end_dt) - MIN (start_dt))
              OVER (PARTITION BY empno)             AS total_days
FROM      got_grp
GROUP BY empno, position, grp
ORDER BY position
I hope this answers your question.
If not, post a little sample data (CREATE TABLE and INSERT statements, relevant columns only) for all tables involved, and also post the results you want from that data.
Point out where the statement above is getting the wrong results, and explain, using specific examples, how you get the right results from the given data in those places.
See the forum FAQ: https://forums.oracle.com/message/9362002

Voice and Data Vlan Routing for CUPC and IP Phones ?

The IP Phones are in 10.1.1.0/24 network (Voice Vlan 10) , Desktop Computers are installed with CUPC 8.5 and they are in 11.2.2.0/24 network (DATA VLAN 20) , Unfied Communication Applications like CUCM , Cisco Unified Presence Server, Contact Center Express are in 172.16.10.0/24 network(Vlan 30). When using Clients like Cisco Unified Personal Communicator, How the Communication between CUPC(DATA Vlan)and IP Phones(VOICE Vlan) is possible?.How network should be configured or designed ? If i make intervlan routing it creates Security problems.what is the best practiced network Configs for these kind of Scenario ? Even if i prefer to configure Intervlan routing, Which all TCP/UDP ports are to be allowed / blocked between VLANS ??

Hi Mohammed,
Hosts on separate vlans communicate with each other through routing, as they are not in the same broadcast domain. Some of the systems you mention use a wide range of ports and, depending on system and installed version, documentation is generally available.
e.g
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/port/8_5_1/portlist851.html
or
http://www.cisco.com/en/US/docs/voice_ip_comm/cupc/8_5/english/release/notes/cupc85.html#wp39407
Be also aware that RTP communication uses extended ranges of ephemeral ports.

Not getting data using FORMULA for GAIN and LOSS

Hi all,
I have made a code for my report in which i have to display GAIN or LOSS using formula as told by me is:
ANLCKANSW-ANLCKNAFA-ANLCNAFAG-ANEAERLBT
and for this purpose i have create an ITAB,the structure is that:
BEGIN OF GI_DETAIL OCCURS 0,
        BUKRS LIKE ANEA-BUKRS,
        ANLN1 LIKE ANEA-ANLN1,
        ANLN2 LIKE ANEA-ANLN2,
        GJAHR LIKE ANEA-GJAHR,
        AFABE LIKE ANEA-AFABE,
        KANSW LIKE ANLC-KANSW,"Asset Acquisation Value
        KNAFA LIKE ANLC-KNAFA,"Accumalated Depreciation
        NAFAG LIKE ANLC-NAFAG,"Ordinary Depreciation Posted
        ERLBT LIKE ANEA-ERLBT,"Retirement Revenue
        END OF GI_DETAIL.
This is my SELECTION criteria for FORM GET_DATA
SELECT kansw knafa nafag anea~ERLBT
      INTO CORRESPONDING FIELDS OF TABLE gi_detail
      FROM
      ANLC
      INNER JOIN ANEA ON
      ANLC~BUKRS = ANEA~BUKRS AND
      ANLC~ANLN1 = ANEA~ANLN1 AND
      ANLC~ANLN2 = ANEA~ANLN2
    WHERE ANLC~AFABE eq '01'.
and this is FORM Organize_Data
READ TABLE GI_DETAIL WITH KEY bukrs = gi_detail-bukrs
                                  anln1 = gi_detail-anln1
                                  anln2 = gi_detail-anln2.
        gi_main-gain_loss = ( gi_detail-kansw - gi_detail-knafa ) - ( gi_detail-nafag - gi_detail-ERLBT ).
        MOVE-CORRESPONDING gi_detail to gi_main.
Problem when i execute with debugger value are coming in my ITAB i-e GI_DETAIL but not displaying in my formula.I can't understand what is the problem in the code.
Thanks,
abapfk

HI
before reading the table first check, it is balnk or not.
gi_main-gain_loss = ( gi_detail-kansw - gi_detail-knafa ) - ( gi_detail-nafag - gi_detail-ERLBT ).
        MOVE-CORRESPONDING gi_detail to gi_main.
here you have appended the values in gi_main-gain_loss and after that you are moving the gi_detail table to gi_main so as per my knowledge it will overwrite the values in gi_main-gain_loss.
so you have to append the values from gi_detail to gi_main individually.
like:
gi_main-field1 = gi_detail-field1.
gi_main-field2 = gi_detail-field2.
and the append gi_main.
check in debugging whther the values coming correctly or not.
I hope this will work for you.
Thanks
Lalit Gupta

Standard data sources for Delivery and Purchase order quantity.

Hi gurus ,
Are there any standard data sources available for Delivery and Purchase Order quantity in Purchasing area .
Thanks in advance .

Hi,
If you are looking for SD Scenario: Check this : https://websmp201.sap-ag.de/~form/sapnet?_FRAME=CONTAINER&_OBJECT=011000358700002719062002E
Happy Tony

Standard Datasource for ECMCT and ECMCA:Consolidation

Hi,
Are there any Standard Datasources available for extractiong data from ECMCT and ECMCA(ECCS Tables).I am currently working in SAP ECC6.0.I could not find any Standard datasources.
Regards,
Samir

Hi,
I found th Datasource by Customizing it from SBIW. Bu tI am getting an erro when I load data through RSA3 for DataOSurce
3EC_CS_1A.
The erro message is as follows:
No consolidation frequency for cons group ASIAPAC.
Diagnosis
For consolidation group ASIAPAC in dimension ZG, no consolidation frequency has been specified for version 100.
Procedure
Maintain the consolidation frequency for consolidation group ASIAPAC.
Ha sanyone come across such issue. Do Provide your Inputs
Regards,
Samir

No data in RSA3 for 2LIS_11_VAITM and 2LIS_11_VAHDR

Similar Messages

Maybe you are looking for