No data in RSA7

Hello Everybody,
I have a problem concerning the following extractors :
2LIS_02_ITM, 2LIS_02_SCL, 2LIS_03_BF, 2LIS_03_UM and 2LIS_04_P_MATNR.
There is no transfer between LBWQ et RSA7 : there are many data in LBWQ but no data in RSA7. All data are blocked in the delta queue (destination : NONE).
The problem concerns MCEX02, MCEX03 and MCEX04. They have all the status "WAITUPDA".
We have implemented the note 869628.
We have did a reset on the status  WAITUPDA (see note 728687) and the status appears at NOSEND. But when we launched for example the job RMBWV302 the status comes back to WAITUPDA.
Could you help me about that?
Thanks
Coralie

I think the V3 job is not scheduled properly.
Request you to run the job manually,onlt
then the data will transfer from LBWQ to rsa7.
Note:-If the regular job is getting failed,the
please make a copy of this job and schedule
it.Dont change the original job.
Thanks,
Saveen
Edited by: saveen kumar on Apr 12, 2011 4:30 AM

Similar Messages

  • Full repair req where its pick the data in RSA7 or RSA3

    Hi,
    Full repair request where its pick the data in RSA7 or RSA3.
    Regards,
    Narasa.

    Hi :
    Full Repair Request :
    First time you will do the Set-up in R/3 .It means you are loading entire full load.When do the repair request it will fetch Data from SSet-up tables.
    Here there is no concept of Delta.
    Some more Info  :  http://www.sap-basis-abap.com/bw/regarding-repairful-request.htm
    RSA7 :
    This is a Delta queue Management.So when you extract the Delta Records to BI RSA7 will send the delta Records to BI.
    If you lost delta then you will use repeat Delta.Then RSA7 will come into picture.
    RSA 3: This is used only for checking the data at the DS Level.
    Regards
    Ram.

  • XML Data Source - RSA7 Queue

    I have a datsource created for an XML incoming data into BW . I have followed all the steps mentioned in the SAP documentation . I am getting the queue displayed in the RSA7 ,but when XI is sending XML data to BW , it is coming and displaying in the queue as one . but the data in the file is coming blank for all the fields defined in the Datasource.
    Let me know any clue what am i missing in the entire setup.

    Hi,
    Go thorugh the below the links
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/9f7f8f95-0501-0010-f5ba-f19167ef74c4
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/biw/g-i/how to send xml data to bw
    Thanks
    DST

  • Short Dump while checking Data in RSA7

    Hi
    My delta loads are failing with a dump in source system.
    I tried to check the delta Queue in source system ui got the same dump as i clicked on show data
    Dump Details
    Runtime Error          MESSAGE_TYPE_X
    Date and Time          18.01.2009 08:24:19
    ShrtText
    The current application triggered a termination with a short dump.
    What happened?
    The current application program detected a situation which really
    should not occur. Therefore, a termination with a short dump was
    triggered on purpose by the key word MESSAGE (type X).
    What can you do?
    Print out the error message (using the "Print" function)
    and make a note of the actions and input that caused the
    error.
    To resolve the problem, contact your SAP system administrator.
    You can use transaction ST22 (ABAP Dump Analysis) to view and administer
    termination messages, especially those beyond their normal deletion
    date.
    is especially useful if you want to keep a particular message.
    Error analysis
    Short text of error message:
    Abnormal termination after error
    Technical information about the message:
    Message classe...... "SY"
    Number.............. 097
    Variable 1.......... " "
    Variable 2.......... " "
    Variable 3.......... " "
    Variable 4.......... " "
    Variable 3.......... " "
    Variable 4.......... " "
    How to correct the error
    Probably the only way to eliminate the error is to correct the program.
    You may able to find an interim solution to the problem
    in the SAP note system. If you have access to the note system yourself,
    use the following search criteria:
    "MESSAGE_TYPE_X" C
    "SAPLRSC2" or "LRSC2U01"
    "RSC2_QOUT_READ_DATA"
    |    -

    Hi,
    Try this SAP note Note 498484 - BW extraction: Mult. delta records with qRFC 6.20.043
    It may fixe your problem, the problem is due to the reason LUWs are extracted from another qRFC outbound queue.This problem usually results in a termination of the delta extraction in the source system or a component of the transfer structure having an incorrect data format in BW (for example, due to the runtime error BCD_BADDATA).
    The extraction process may terminate in the RSC2_QOUT_READ_DATA function module with the MESSAGE_TYPE_X runtime error.The message for this runtime error is SY097 'Abnormal termination after an error'.The termination prevents you from loading incorrect data into the BW.
    Also,
    Try Note 498484
    https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=498484
    May help you in solving your issue based on your SP.
    Best Regards,
    VVenkat..

  • View data in Delta Queue (RSA7)

    Hi,
    We want to see data records available for extraction in delta queue.
    Data source is 0CO_OM_NWA_2. In RSA7 it is showing 5 in total column for this datasource.  When we select "Diaplay Data Entries (F2) , select update mode Delta and execute it is displaying "List contains no data"
    How to view this data ?
    Regards
    SS

    Hi,
    Once you schedule the infopackage , it will pick up the data from RSA7  . Afterwards when you check the data in RSA7   by selecting update mode as delta - you won't find any records . but you can see the data in by selecting update mode - delta repetition - execute it. It will show the records which has been already transferred to BW side.
    Update mode - repetition , will hold the data until the next delta is successful..
    Hope i am clear..
    Regards,
    Siva.

  • RSA7 to BW data fetch problem

    Hi Guys,
    I am extracting data from RSA7 to BW with delta update.
    in RSA7 tcode I can see column Total is populated with some entries means it has records, when I tried to see these records
    in Queue-> Display data entries->Update mode (Delta update) I don't see any records but when I used (Delta Repitition)
    as a update mode I am able to see the records.
    But when I am doing Delta update to BW it ends with 0 Records and RSA7 total column shows 0 entry.
    What could  be the problem?
    Thanks & Regards
    Deepak Chaavn.

    Hi
    See
    https://wiki.sdn.sap.com/wiki/display/profile/Surendra+Reddy
    Checking the Data using Extractor Checker (RSA3) in ECC Delta Repeat Delta etc...
    http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/80f4c455-1dc2-2c10-f187-d264838f21b5&overridelayout=true 
    Data Flow from LBWQ/SMQ1 to RSA7 in ECC and Delta Extraction in BI
    http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/business-intelligence/d-f/data%20flow%20from%20lbwq_smq1%20to%20rsa7%20in%20ecc%20and%20delta%20extraction%20in%20bi.pdf
    Thanks
    Reddy

  • RSA7 Data Recover

    Hi All,
    If someone delete delta in rsa7, how to recover it? What is the table stores delta information?
    Thanks,
    Chandu

    Hi,
    You can't get the deleted data form RSA7, you nee to identify the Document no.s and then fill setup tables and go for Full loads, in this way you need to correct it else aging Re -Init.
    Thanks
    Reddy

  • Data not populated for Enhanced field

    Hello,
    I had done enhancement by adding field to the LO Datasource.
    Written the code in the CMOD to populate the data. When i run init it worked fine and i am able to see the data for the enhanced filed.
    When i run delta iam not able to see the data for that field in RSA7, But i am able to see the data in RSA3.
    What is the reason that i am not able to see the data for the enhanced field in RSA7?
    Thanks in Advance!
    Regards
    M.A

    Hi M.A,
    This means that there is no delta data for that field.
    If there is no change in the data for that field then you cannot see any data in RSA7.
    Check in the Delta repetition in the RSA7 for any data for that field.
    Regards,
    ravi Kanth

  • RSA7 shows zero records for delta upload of 2LIS_03_BF Datasource

    Dear Professionals,
    I am having constant issues with inventory management DataSource (2LIS_03_BF). I scheduled delta upload in r3 production using LBWE, keeping in mind that in LBWE there is no options for posting dates, ETC... In RSA3, there are records, but when i check RSA7, it is showing 0 records. What could be the problem. Do i need to do anything/activation anywhere in LBWE or RSA7 to see the records. Please advise.

    Hi,
    Normally there should be a collective run which transfers data from the application-specific queues to the BW delta queue (RSA7), just like this workflow:
    MCEX03 queue==> RMBWV03 (Collective run job) ==> RSA7-Delta queue => BW
    It is necessary to schedule the job control regularly - see point 3 of SAP Note 505700.
    Check also these SAP Notes:
    869628     Constant WAITUPDA in SMQ1 and performance optimization
    728687     Delta queued: No data in RSA7
    527481     tRFC or qRFC calls are not processed
    739863    Repairing data in BW
    Rgds,
    Colum

  • Data source Delta problem  very urgent

    We are in Media Company and just implemented SAP BI and the datsource
    used by us is 0ME_ISM_AM_ORDER_1.
    The process is when a order is booked . there is a version created and
    if the order is modified "n" number of times, then "n" number of
    versions are created and this creates prblem in our delta load as the
    last version should exist but in this case all the changes in one order
    (i.e that many number of versions) are created and delta load is unable
    to finish.(because all versions keep updating in delta queue ) we are
    allocated 2 hours to complete delta but here the process of delta keeps
    running .
    i delta queue is all version can be found.
    please help
    regards
    pk

    Dear Anil
    Please try to run the V3 update with queued delta option as it will run the periodic collective run where last version will be maintained.
    Once the delta brings data to RSA7 let us load the same into ODS(Change log will maintian the versions for Number version created) and then into CUBE, this is very specific deisgn suggestion for the kind of scenario that u mentioned below.
    Hope this will help.
    Regards,
    Kishore.

  • Delivery date is missing in BW

    Hi All,
    Delivery date is missing in BW for few PO's.. I have checked all transformations and routines everything is fine.. in R/3 for same PO's delivery date exist but in BW for PO item in PO's delivery date is missing...  what  may the cause for this
    Data source: 2lis_02_itm and 2lis_02_scl
    Regards
    Sreekanth

    Did you check the data in RSA7 for the current delta and then in the PSA?
    Do you have the Delivery dates shows there?
    If yes, then there is something wrong while updating the dates in the further BW targets.
    In the other case, where in PSA itself the dates are not available, you'll have to check the R/3 side. Maybe the data source?
    Hope this helps.

  • Problem to update very large volume of data for 2LIS_04* extr.

    Hi
    I have problem with jobs for 2LIS_04* extractors using Queued Delta.
    There are interface between R3 system and other production system and 3 or 4 times in the month very large volumen of data has been send to R3.
    Then job runs very long and not pull data to RSA7.
    How to resolve this problem.
    Our R3 system is PI_BASIS 2005_1_620.
    Thanks
    Adam

    U can check these SAP Notes..........it will help u........
    How can downtime be reduced for setup table update
    SAP Note Number: 753654
    Performance improvement for filling the setup tables
    SAP Note Number: 436393
    LBWE: Performance for setup of extract structures
    SAP Note Number: 437672

  • Transactions RSA7 and SMQ1

    Can somebody please tell me what is the relation between SMQ1 , RSA7 and how this delta system works , are these transactions only for the LO extractions. I have already scanned SDN but am not clear , I am clear that all values entered by  user will come in RSA7.

    Hi......
    Check SAP Note : 380078 'FAQ BW delta queue (RSA7) Questions and answers.........
    What is the relationship between RSA7 and the qRFC monitor (Transaction SMQ1)?
    The qRFC monitor basically displays the same data as RSA7. The internal queue name must be used for selection on the initial screen of the qRFC monitor. This is made up of the prefix 'BW, the client and the short name of the DataSource. For DataSources whose name is shorter than 20 characters, the short name corresponds to the name of the DataSource.
    For DataSources whose name is longer than 19 characters (for delta-capable DataSources only possible as of PlugIn 2001.1) the short name is assigned in Table ROOSSHORTN.
    In the qRFC monitor you cannot distinguish between repeatable and new LUWs. Moreover, the data of a LUW is displayed in an unstructured manner there."
    Hope this helps......
    Regards,
    Debjani...........
    Edited by: Debjani  Mukherjee on Nov 13, 2008 7:33 AM
    Edited by: Debjani  Mukherjee on Nov 13, 2008 7:47 AM

  • Pre transport Activities for Logistic Cockpit Data sources

    Hi Friends,
    I am transporting the LO cockpit (2LIS) datasources from Dev to Acc, i know we have to do some pre-transport activities like the following should be done, pls suggest me if im missing anything.
    1. Run the V3 job (RMBWV311,12,13) to post data into RSA7
    2. Stop V3 job
    3. Run one 2 deltas to BW to flush RSA7
    4. Do the transport
    5. Restart V3
    6. Continue w/ delta
    I have a question here how do we stop the V3 Jobs or should we cancel the Realeased Job or do something else?
    Thanks in Advance
    Ananth

    Hi,
    You should ensure the following:
    Setup tables for the concerned datasources are empty ( tr LBWG )
    (ii) clean the entire data queue - flush data from the extraction queue to delta queue using 'job control' in LBWE
    (iii) pull data to BW from the delta queue
    (iv) stop the updates to extraction queue using 'job control' - you will have to delete the scheduled jobs
    (v) stop BW pull jobs
    (vi) ensure that no new transactions are posted during your transport pertaining to your application area - you might have to lock create / change / delete transactions in R/3 for some time - the best mechanism is to bring the system in single user mode.
    Hope this helps.
    regards,
    Pinaki

  • BI upgrade and RSA7 queue

    We are upgrading our BI 3.5 to BW 7.3 with Unicode Conversion now. I am aware before the upgrade, queue in RSA7 should be empty to ensure delta works after the upgrade.
    We have a very long BW downtime windows, like say 3 days,  due to BW DB size, the problem is we have a VERY LIMITED downtime window, like say 6 hours, for our ECC transaction system. We can not lock users & suspend background jobs in ECC for 3 days to prevent data from being filled into RSA7.  Is there a way to solve this problem so delta still work after BI upgrade?
    TIA,
    James

    There is no need to lock R/3 ECC users. before upgrage extract data from R/3 . after upgrading BW , activate all infosource & tranfer rules. Whenever Upgrade activity is over in BW , extract data from ECC( R/3).
    We will stop BW for 3 days, during those 3  days I believe there will be more data was pulled into RSA7 queue, that will cause a delta issue after BW upgrade.
    If there are any entries in LBWQ and RSA7 it will not allow upgrade to move forward.
    We are upgrading BI, not ECC. If there are entries in LBWQ & RSA7 in ECC, how does this stop BI upgrade? Thinking about we even disconnect the network between ECC & BI, we still can upgrade BI if we do not take delta into account.
    1) just run the V3 jobs which gets data from SMQ1 and LBWQ to RSA7.
    2)Cancel the V3 job in ECC system.
    3) Run your delta IP's which picks data from RSA7 to BI system.
    This sound reasonable and I am happy with this.
    I am the Basis and I need ask BW consultant to have a look at this approach.

Maybe you are looking for