No data in S001 and RSA3 after set up for 2LIS_01_S001

Hi All,
I am using 2LIS_01_S001 datasource to pull data to customer cube 0SD_C01. This datasource is made active in R/3. I tried doing set up using OLI7,OLI8 and OLI9 transaction, but no data is getting updated to S001 table and hence no data in RSA3. Data are there in VBAK ,VBAP etc...
I dont have any clue why data is not coming to S001.
Parameters are set up in OMO1 transaction also.
We are in BI 7 and ECC 6.0.
Could you please share your thoughts on this.
Awaiting for your quick response.
Thanks,
Jayasudha

Hi Everyone,
Follow this path in ECC system
SPRO-Reference IMG-Logistic general-Logistic information System-Logistic information warehouse-Databasis- Tools-SetUp Statistical Data-Application-Specific Setup of Statistical Data and click the notepad symbol for you required application in this case its SD. It will give a complete step to load data.
Regarding data not loading:
The reason could
1) No update group maintained for the Sales document (check table VBAP)
2) Mark the check box in the tcode OLI7 (Redetermine update group & update documents)
Even i am facing an issue where the sales document number without update group are not getting update to S001 info structure.
Any clue why ?? What should be done in that case

Similar Messages

IMac G5 tries to start and dies after spinning cog for a minute

iMac G5 tries to start and dies after spinning cog for a minute
I did this;
1. Insert the Mac OS X Install disc that came with your computer, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.
3. Click the First Aid tab.
4. Click the disclosure triangle to the left of the hard drive icon to display the names of your hard disk volumes and partitions.
5. Select your Mac OS X volume.
6. Click Repair. Disk Utility checks and repairs the disk.
the result was.
the 'permissions' are sometimes wrong, but they repair
the hard drive is either repaired or OK
the iMac will then restart and work fine and sometimes shut down and restart OK
after replacing the Hard Drive I actually thought I had fixed it and went to bed late but happy,
on waking in the morning, however I was not so happy it fired up and then died after dong -> apple logo -> spinning cog -> dead!!
I would be grateful for any help
Thanks
Pete

Hi Miriam,
Thanks yes,
here we go -- after running disc utilities it tells me directory OK and disk OK (or something like that) When I replaced the Hard Drive, I started 'fresh' erased/formatted the hard drive (new Seagate Barracuda 7200 500GB) and it has just got 'tiger' on it (and upgraded to whatever it is now I think I remember 4.11, I can't tell at the moment as I have got the back off) I didn't transfer any data I just took the old drive (Seagate 160GB) out and stuck the new one in.
I've just changed the battery (I didn't really think it would work, but I was still hopeful and I'd bought the battery anyway) I did the LED thing, the internal power button thing, and the resetting the SMU thing (with crossed fingers and bated breath) but -- so I'm thinking is it the power supply? I read some of Jim's weighty, but worthy tome and resolved to remove the power supply and have a look. On opening it up, it does look as though, one (at least) of the capacitors has 'blown' (by the way, just in case I sound like I know what I'm talking about, I don't of course, I'm just quoting Jim's words;-) I'd love to send you a picture of the inside of the power supply showing what I believe to be a 'blown' capacitator (and I'm going to try to send one to Jim as I think it might be useful to him and others. can I attach a photo in any way or would you like to send me your email address <Edited by Moderator>
Thanks
Pete
PS it's still 'weird' to me, why it starts and runs well, when started from tiger (or whatever) and then starts or restarts from the Hard Drive unless I leave it a few hours and come back and try to start it
again? wow it's late nearly 4.00am here in london UK.

Billing:Rules for posting key 01 and acct 621201 set incorrectly for"XREF3"

Hi Experts
At the time of billing i am getting the below error and its not posting into accounting
Rules for posting key 01 and acct 621201 set incorrectly for "XREF3" field
Message no. F5272
Diagnosis
One of the rules specifies that the field demands a required entry, the other rule says that the field is to be suppressed.
Procedure
Correct one of the two rules for the field selection.
You find the field status group in the G/L account master record:
Execute function
You can find the rules for the field status group in the Financial Accounting Implementation Guide in the activity Maintain field status variants.
You can find the posting key in the Financial Accounting Implementation Guide in the activity
Define posting key.
Regards
Selvi

Check this thread
[Re: Posting to GL |Re: Posting to GL]
thanks
G. Lakshmipathi

I have the latest itunes and I use Windows and suddenly after working fine for years, itunes will not synch with OUtlook anymore. Any ideas?

I have the latest itunes and I use Windows and suddenly, after working fine for years, itunes will not synch with Outlook anymore. Any ideas?

Contact NIK for updated/upgraded versions of their plug-ins. They have been having a lot of issues with their plug-ins.

How to recover hp pre-installed games and office after system restore for HP Mini 210-4127se?

how to recover hp pre-installed games and office after system restore for HP Mini 210-4127se?

Hi,
You can reinstall them from Recovery Manager by clicking on Start=> All Programs.
If you have performed a complete HP Recovery using F11 then all the software should be there. If you have performed a minimized recovery then you can install applications from recovery manager...If none of these works then you'll need USB recovery..
Here are the links that will guide you through the process:
Using Recovery Manager to Restore Software and Drivers (Windows 7)
Performing an HP System Recovery (Windows 7)
Order USB Recovery
Note:
If you have HP Support Assistant installed on the computer(The Blue Question Mark) then open it ==> Complete all pending Updates & Tuneups==> Restart and Check. It may solve your problem
Although I am an HP employee, I am speaking for myself and not for HP.
**Click on “Kudos” Star if you think this reply helped** Or Mark it as "Solved" if issue got fixed.

No data in Business Process Analytics after setting up BPA and BPMon

Hi,
I have followed the BPA set up guide and done all the configuration for BPA. I have set up BPMon for a solution and in the logical component node i have done configuration for many application monitors.
Also in the "Load Master Data" node the master data is loaded. But still in BPA when I am selecting the time frame and applying it I am getting a message that no data is applicable in the selected time frame.
How can i get the data in BPA.

Hi Vishal,
1435043 - E2E Workload Analysis - No applicable data found
specially section 3) EFWK Resource Manager Job, wehre you find several
hints to check this job and the EFWK Adminsitration.
Also check note: 894279 Background processing in SAP Solution Manager
Please have a look at following chapter of the the BPA Setup
guide to fully understand the data flow in this application:
2 Architecture of Business Process Analytics
> 2.1 Data Retrieval and Reporting
Please also review following chapter, in to see if there are any errors
extracting the data from the managed systems to SAP Solution Manager:
3.2.3 Checking status of Solution Manager Diagnostics Extractor
Framework (EFWK)
Also check:
1570282, 1643303 and 1602437
thanks
Regards,
Vikram

Inconsistencies data between ODS and RSA3 in SAP system (delta problem??)

Hi everyone,
I have a problem in my SAP BW production system. There is inconsistencies data between ODS (using tcode LISTCUBE) and Datasource in SAP system (tcode RSA3).
I'm using Datasource: 0FI_GL_10 and ODS: 0FIGL_O10.
In SAP system (using RSA3):
GL Account: 1202012091
Comp Code : 5400
Bus Area: 5401
Fiscal Year :2008
Period: 07
Accum Balance : $0
Credit Total: $350
Debit Total: $350
Sales : $0
And in ODS (using ListCube):
GL Account: 1202012091
Comp Code : 5400
Bus Area: 5401
Fiscal Year :2008
Period: 07
0BALANCE : $350 (it should be $0,shouldn't it? )
0CREDIT: $0 (it should be $350,shouldn't it? )
0DEBIT: $350
0SALES: $350 (it should be $0,shouldn't it?)
I have tried these :
1. Check if there is a start routine / routine or not in transfer or update rules....and...i get nothing
2. Check the data using tcode FBL3N..but the data is ok
And then i tried to trace the process chain and find error on delta infopackage which pull these data
Date
07.30.2008 : 231141 records --> error (ODS activation) --> request has deleted forever
07.31.2008 : 2848 records --> error (ODS activation) --> request has deleted forever
08.01.2008 : 135679 records --> error (ODS activation) --> request has deleted forever
08.02.2008 : 135679 records --> successfull repeat delta action
From 30 July until 1 August there is an error on delta infopackage because
fail to activate ODS (No SID found for value 'RIM' of characteristic 0UNIT). On 2 August someone delete the red requests and repeat the delta and success. Is there any possibilities that this problem arise because of this? If this the cause, how to bring back 2848 and 231141 records which has deleted?
Thank you and Regards,
-Satria-

Hi everyone,
I have solved my problem. I executed my infopackage again (selection condition using GL Account which have wrong amount) with update mode 'Full update' and choose Scheduler > Repair Full Request and tick the checkbox.Thank you.
Regards,
-Satria-

Lead Selection does not work after setting filter for ALV.

Hi, Can you please suggest on below scenario :
I have a Node with a sub node in it .
I am using the supply function on Sub Node to retrieve the date based on Parent Node.
There are two ALV's to display parent and item data. The issue is when a filter(user defined filter) is done on Parent table, the supply function does not work. The value is that of the selected row before setting the filter. Even after removing the filter, the item data is stuck and does not change on Lead Selection.
One thing I noticed is if the child table is a table UI, there is no issue. The only problem is when the second table is ALV
Thanks In Advance

Hi Prashanthi,
Your issue can be resolved as below
Create an event handler method 'set_alv_data' for the event 'ON_LEAD_SELECT' of parent alv
Write the below code inside the event handler method
METHOD set_alv_data.
DATA lo_node TYPE REF TO if_wd_context_node.
DATA lv_path TYPE string.
DATA lv_index TYPE string.
lv_index = r_param->index.
CONDENSE lv_index.
CONCATENATE wd_this->wdctx_my_parent_node
lv_index
wd_this->wdctx_my_child_node
INTO lv_path SEPARATED BY '.'.
lo_node = wd_context->path_get_node(
      path                          = lv_path
DATA lo_interface TYPE REF TO iwci_salv_wd_table.
lo_interface = wd_this->wd_cpifc_alv_child( ). "get the ref of alv comp of child
lo_interface->set_data(
    EXPORTING
*    only_if_new_descr =
      r_node_data       = lo_node
ENDMETHOD.
The above code sets the data node of child alv based on lead selection of parent alv data.
Note: Replace 'parent_node', 'child_node' with your nodes & 'alv_child' with your alv component name of child alv.
If you want to control the data of child alv on filter function, you can use the event ON_STD_FUNCTION_AFTE and once you define the filter you get the r_param->id = 'SALV_WD_FILTER_DEFINE' & now you can clear data of child alv.
Hope this helps you.
Regards,
Rama

CFolders: BADI's and any BC sets available for cFolders

Hello Gurus,
Are there any BC sets given for cFolders, also please inform me the list of BADI's which are to be activated for cFolders 4.0.
Regards
Prakash Kalluru

Hi ,
Can you provide me with the Transaction code for this slills category details.
regards,
krishna.

Data not seen in RSA3 after setup table was filled

HI
We have an issue where we do not see data for Sales Orders and Deliveries in RSA3 (and hence is missing in BW).
For sales orders we are missing 6 months' data and for Deliveries we are missing data from june to october 2007.
We checked the sales order and delivery documents in R/3 and they exist for the above date ranges. We deleted and filled up the setup tables. But still don't see the data in RSA3.
There were no extractor changes done.
Any tips?
Thanks
Pooja

Go to SE11 and search for setup and look for the specific data source and see the content, if the content is actually zero, then there is nothing in the setup table.
thanks.
Wond

Diffrerent data between table and RSA3

Hi all,
I got one prduction order.We filled the setup tables.
Later we changed production order.We deleted and filled the setup tables again.
But in RSA3 Its showing the same dates wht we before.
In tables also its showing changed information.But in RSA3 the old ones we r getting.

Krish,
Give a new run and fill the setup tables. This might be due to the validity of given before the run. Check it once.

Highlighting TEXT - not the field - and clearing the set value for a new one

I have a form in which various text fields are set with a message to inform the user as to what kind of information I want typed in. My goals are:
1. Have the text get highlighted so when the user starts typing, the "old" value gets replaced with the "new"
2. Or, when the user tabs or clicks in the field all of the "old" value is deleted and they can start typing the "new" value from the beginning of the field.
I am trying to eliminate having to manually highlight the field in order to type in the needed information. But each field needs to start with a value so the user knows what kind of information I am looking for.
Does this make sense? By the way, I have no JavaScript experience...uh oh!

Use the Media Manager (under the File menu bar item).
Link:
What Can You Do with the Media Manager?

Anyconnect and e-mail set up for Cisco internals

Hi Team,
Just bought a Huawei Ascend G300 GB 2.3.6 ( not upgraded to ICS due to huge amount of bugs on VDF release ) and need to use e-mail on the run and remotely.
Our internal sites do not provide info on how to set up anyconnect for my phone.
App market marks the Samsung anyconnect as suitable for my phone but it does not end installation due to error: shared ID´s...
tried to set up e-mail account first, but it returns that Username or password is not valid ( is the psw the CEC one? )
so basically cant access my mail..
above steps including download were done on company Wi-Fi network.
Thanks,
Harald

Hi,
Maybe this will help.
You can have your Exchange Server admin add another SMTP address to your user account which does not have an apostrophe. Then you can add that one to the iPhone in the email address field at the top and add your actual user account name (the one with an apostrophe)to the user fields for incoming and outgoing email server, and you will still get all your email.
A workaround...

Was asked to install Oracle Java 8 and now after LibreOffice asked for Apple Java 6

Hello,
a few weeks ago I was told by a webpage I need java, it was a movie site, so I was doubting it and so I went to the oracle page via google search and found Java 8 (jre 8u40-macosx-x64).
Today I installed LibreOffice and after first opening ittold me, that I need Java 6 and asked, if I want to search for it. I let it search. There was not the usual browser window -like thing (which I guess is the App-store, where I am offered to upgrade to 10.10 for free and told that there are 4 incompatible updates for iLife products available). Instead it was just a small progress-bar window that had the title "apple software update" (or similar).
I then quit it, because it was not making progress.
Now I close LibreOffice and then thought "well lets install Java 6", but this time I was not asked to install it. Also "apple software update" doesn't offer it, when I launch the blue "A"-icon (i.e. Appstore?).
What do I need? Should I delete Java 8? How do I get Java 6?
I found this, but it doesn't help me: http://docs.oracle.com/javase/7/docs/webnotes/install/mac/mac-preferences.html and Apple Java Vs Oracle Java? Do I need both?
THANKS!!!
Machine: Mac Mini 2012, 10.9.5

Thank you! In the meantime I found that item labeled as "2014-001" on the apple.support page.
It mentions that it will remove all Java web applet and that there was a certain button one has to push to install it. I don't find the button "missing plugin" (well maybe that will come once it is needed?)
Can Apple J6 and Oracle J8 coexist?
From the fact that apple's J misses the web applet, I guess they will complement each other right?
Also, am I right, that, if I go to Safari/Firefox -> Security I can disable Java for web stuff (but it will be still intact for Java applications like LibreOffice) and once I will encounter a webpage that wants Java, I will be told and can activate it in Safari/Firefox -> Security ? (Since I guess it is better to disable Java on the web???)
Will the web sites always tell me, if they need Java or will pages not work and I will wonder why?

Starting tomcat server after setting classpath for java

Sorry if this is nothing to do with java, it is more to do with starting tomcat server.
Tomcat server has been working totally fine, but when I wanted to compile a java servlet I wrote for it, I needed to run a BAT file called gojava in MS-DOS that had the classpath for java to work properly. I then attempted to run Tomcat, but just got 'bad command'. As long as I don't start up java by setting the classpath, tomcat will work, but as I need java to write servlets and then to test them without restarting my PC each time, how do I get tomcat to work?
Thanks
Hannah

Sounds like your batch file is changing your path, not your classpath. If you're getting "Bad command or filename" when attempting to run Tomcat, it can't find the executable. Check out the .bat file and see what it's doing (maybe even post it here for further clarity). If it's changing your path at all, make sure it includes a %path% to indicate that it simply wants to append items to the path, not overwrite it completely. Sorry if i'm way off base with my suggestions, but it sounds like that's where the problem's going to be, especially if rebooting resolves the problem.

No data in S001 and RSA3 after set up for 2LIS_01_S001

Similar Messages

Maybe you are looking for