No data in source system

Hi at all,
I extrakted initial data from source system and get a warning "No data in source system". I checked the system and it is ok. Plz help me

Hi
Yep ,,, if u do and delta after Init ...the records it will fetch is 0records
IF there are no changes happend in r3 then u wont get the data ..
So, Go to the R3
1) check ur delta queue in R3
2) or RSA3 and test extract for ur datasource in the D mode and also select ur sourcesystem as the BW sstem
u have to get 0 records
hope it helps
regards
AK

Similar Messages

Error in Process Chain while extracting data from source system

Hi All,
Dail we are facing problem while retrieving the data from source system for the data source 0TB_AMOUNT1 in the process chain, it is giving error "Function module BANK_TMC_API_SIM_GET does not exist Furnction module". when I repeat the step than it is going fine.
Please let me know why this error is coming for first why it is not coming after repeating the step?
Thanks & Regards,
Murali.

Hi Murali,
Hope you are doing good..
Is it a full or Delta load on a daily basis? Did you check if the FM exists in your system?
Did you try debugging the load in source system and check if the extractor is trying to call FM you mention.
If possible please post the exact error message you are receiving so that we could get an idea whats the error and why you are encountering it.
As of now what i can suggest is, go to RSA2 in source system, give the datasource name and check if the extractor code has FM in it.
Regards,
Anil Pragada.

How to upload Transaction data from source system to BI 7.0

Dear friends,
I want to know how to upload Transaction data from source system to BI 7.0.
if anybody having step by step material for this process ,please send it to my
mail id.
[email protected]
[email protected]
Thanks,
D.prabhu

Hi,
it works in the same way as before in case you are not using the new features like the dtp and the transformations. Using the new features, you schedule a infopackage to load the data up to psa and schedule a dtp to post the data to the targets.
regards
Siggi
PS: We want to share knowledge in sdn and not keeping it private by having the information sent to our email adresses.

Transfering data from source system to bw

I am sending data from two source systems into single data target in bw. For ex:- think that there are KPI's in the first source system & another 4 in the second source system.When i load it into bw i should see the 8 KPI's in a single record is it possible.
   please some one can help me in this regard i will be thankful to them.
S.S 1(4 KPI's)
              ]-------BW(DT)8KPI's in the same record
S.S 2(4 KPI's)

I am sending data from two source systems into single data target in bw. For ex:- think that there are KPI's in the first source system & another 4 in the second source system.When i load it into bw i should see the 8 KPI's in a single record is it possible.
   please some one can help me in this regard i will be thankful to them.
S.S 1(4 KPI's)
              ]-------BW(DT)8KPI's in the same record
S.S 2(4 KPI's)

How Delta Queue fetches data in source system.

Hello Experts,
SMQ1 is physical storage of all transactions created in the source system. Delta Queue(RSA7) fetches data from SMQ1. In case of Queued and Unserilized V3 delta where LBWQ and SM13 come into picture. Can you please clarify my doubt.
Thanks in advance.
Zakir.

solved question

Error Occures while loading data from Source system to Target ODS

Hi..
I started loading Records From source system to target ODS.while i running the job i got the following errors.
Record 18211 :ERROR IN HOLIDAY_GET 20011114 00000000
Record 18212 :ERROR IN HOLIDAY_GET 20011114 00000000
sp Please help me in these following Errors..
Thanks in advance,

Hello
How r u ?
I think this problem is at the ODS level, ZCAM_O04 is ur ODS Name.
Could u check the ODS Settings, and the Unique Data Records is Checked or Not ?
Best Regards....
Sankar Kumar
+91 98403 47141

Problem in extracting data from source system

HI
I am comparing source system and data in bW for a particular datasource.In this process in source system transaction RSA3 when i am trying to extract data its not showing the exact count.I couldnt able to understand the setting options like Datarecord/calls & Displa extr.calls in transaction RSA3.can some one assist in this..?

Vara Prasad,
I do know about the popup , but then the popup is displayed only AFTER the extraction completes. Asusming that you have about 10 million records - I cannot find the number of records without actually extracting it and my RSA3 will fail because it is too large of RSA3 , I was talking about if there was a method by which I could fins the number of records alone without extracting the data / running RSA3.
Also if your extractor has 20,000 records , and if you set 10 datapackets of 1000 each the popup will display 10000 whih is incorrect and you would have to increase the data packet / package size to finally arrive at the right number...

System slow during loading data from source system

hi,
I am trying to load master data from r/3 into bw in quality envirnoment by means of a process chain. The problem is it being a master data load is consuming a lot of time. My development and quality environments are maintained on the same server. I doubt about this being something related to memory. If anybody could mention the ways through which memory can be monitored along with the reason for the slow nature of the system would be very helpful.
Source system: R/3.
Environment : Q03(quality)
Load : Master data(full load)

Hi,
I will suggest you to check a few places where you can see the status
1) SM37 job log (In source system if load is from R/3 or in BW if its a datamart load) (give request name) and it should give you the details about the request. If its active make sure that the job log is getting updated at frequent intervals.
Also see if there is any 'sysfail' for any datapacket in SM37.
2) SM66 get the job details (server name PID etc from SM37) and see in SM66 if the job is running or not. (In source system if load is from R/3 or in BW if its a datamart load). See if its accessing/updating some tables or is not doing anything at all.
3) RSMO see what is available in details tab. It may be in update rules.
4) ST22 check if any short dump has occured.(In source system if load is from R/3 or in BW if its a datamart load)
5) SM58 and BD87 for pending tRFCs.
Once you identify you can rectify the error.
If all the records are in PSA you can pull it from the PSA to target. Else you may have to pull it again from source infoprovider.
If its running and if you are able to see it active in SM66 you can wait for some time to let it finish. You can also try SM50 / SM51 to see what is happening in the system level like reading/inserting tables etc.
If you feel its active and running you can verify by checking if the number of records has increased in the data tables.
Thanks,
JituK

Master Data and Source System Data Reconciliation.

Hi Experts,
I would like to know the best ways in reconciliation between the source system and the data that is extracted into BW.
We are using only standard DataSources.
I am currently running RSA3 on a DataSource on IS-U side and then comparing it to the number of records in Master Data Maintenance on BW side. But I have noticed difference in counts.
There is no ABAP logic behind the extractors.
Kindly, suggest the best ways to do effective reconciliation.
Thanks in Advance.
Best Regards,
Chandu.

At the outset, I will sugegst you activate the data in the master data info object and also perform attrubute change run before you start the reconciliation.
One of the main reasons of data mismatch for master data is presence of "duplicate" records at the source system and you do eliminate them during the data loading process. In your case, you say there is no data manipulation during the data loading process.
Another reason is where you bring master data from multiple sources and the later load of data overwriting the earlier load of data for the same key of records.
Assume you load data to the PSA before you load to the info object. The practice is to reconcile with the PSA data to the RSA3 first and then between the PSA and the master data.
Ravi Thothadri

Error occured in the data selection while extract data from Source system

Hello Friends
i am facing Problem while extracting data to Biw System from SAP R/3 system
The error mesage is 'Error occured in the data selection '
i.e. Monitoring - Details tab - Extraction - With error

Hi
The delta wil take the Last init selection for loading data in to the BW...
Did u check the IP at the Update tab is it the correct delta only.. or its a full..
better to go to the RSA3 and check the extractor in the Delta mode .. if u give ur delta mode it automatically takes the selction options.. so please try in RSA3..
regards
CK
PS: CHECK THE INIT SELECTIONS TOO or do an init with outdatatransfer and perform the delta...
Message was edited by:
BW Star

Steps to Extract data from Source System

Hi,
I want to use business content object 0PA_C01. I have implemented it in the SAP BW system wanted to know how t=do I extract the data from R/3 system now to the cube. I am new to extraction so kindly help me out in this.
Thanks.

Hi SAPBILearner,
Genric Extraction Steps:
1) In R/3 side Create a Data source by use of RSO2 tcode
Select datasource type here, Give datasource name click create button
2) Specify description
Specify your table name
Choose the Application Component(like SD, MM, PP)
Click SAVE it takes to next screen
3) Choose the fields for visible and hidden
SAVE it.
Your datasource has been created
4) In RSA3 (Extract Checker) you can check your datasource it contains data or not
IN BW SIDE
1) First Replicate your datasource
2) Create InfoArea--> Info objects and all
3) Create InfoSource and assign this R/3 Datasource
4) Create info package to load data.
LO EXTRACTION STEPS
===================
1) In R/3 side, First delete the setup table (LBWG)
2) RSA5 --> transfer datasource
3) RSA6 --> Verify transferred datasource available or not
4) LBWE --> Maintain datasource
5) OLI*BW --> Fill setup table
6) RSA3 --> Extract checker
In BW side
1) Replicate datasorce
2) Asssign Infosource , activate datasource
3) Create infopackage to load data
Thanks
Mrityunjay

Data extraction taking long time in source system.

Hi all,
I have created one custom datasource which is full update (not delta).
we are extracting data using function module in the source system.
it works well in Dev system but when I try to pull even 10 days data from source system to BW in production environment it generates huge log in source system. job log gets full & we have to cancel the job.
Job log looks as follows
Job started
Step 001 started (program SBIE0001, variant &0000000642922, user ID ALEREMOTE)
Asynchronous transmission of info IDoc 2 in task 0001 (0 parallel tasks)
DATASOURCE = ZDSHIPTRACKN
*          Current Values for Selected Profile Parameters               *
* abap/heap_area_nondia......... 2000000000                              *
* abap/heap_area_total.......... 2000000000                              *
* abap/heaplimit................ 40000000                                *
* zcsa/installed_languages...... DE                                      *
* zcsa/system_language.......... E                                       *
* ztta/max_memreq_MB............ 2048                                    *
* ztta/roll_area................ 6500000                                 *
* ztta/roll_extension........... 2000000000                              *
Call customer enhancement BW_BTE_CALL_BW204010_E (BTE) with 3,858 records
Result of customer enhancement: 3,858 records
Call customer enhancement EXIT_SAPLRSAP_001 (CMOD) with 3,858 records
Result of customer enhancement: 3,858 records
PSA=0 USING & STARTING SAPI SCHEDULER
Asynchronous send of data package 1 in task 0002 (1 parallel tasks)
IDOC: Info IDoc 2, IDoc No. 7775180, Duration 00:00:00
IDoc: Start = 28.01.2011 11:26:36, End = 28.01.2011 11:26:36
Call customer enhancement BW_BTE_CALL_BW204010_E (BTE) with 0 records
Result of customer enhancement: 0 records
Call customer enhancement EXIT_SAPLRSAP_001 (CMOD) with 0 records
Can someone plz tell me what can be the issue.?
Thank you

Hi
Whats logic for datasource?
can you share code here?
it might work fine after some ABAP tuning.
Regards
Sudeep

How to Reconcile Data Between SAP Source Systems and SAP NetWeaver BI

Hi,
I just read "How to Reconcile Data Between SAP Source Systems and SAP NetWeaver BI". While I'm waiting for more authorisation to r/3 to carry it out and test this functionality.
I'd like to ask a question to anyone who has implemented this type solution. On page 10 it talks about creating a view then setting up the datasource. The solution talks about runnig a query. I suspect when we run a query I would run it for only a period(using variable) to reconcile.
My question is this. Will the datasource extractor on /r3 only select the period in our variable or will it do a full selection of the data which would then be passed to BW for filtering?
Regards

DEar Mark,
There are several avenues where you can see and reconcile your data with source system, u can see data in by tcode RSA3 for a datasource, and compare the values with actual document posted into the R/3 system. Respective fuctional consultant canhelp you a lot to confirm the data.
On BW side u can see the data in PSA and then check tranformations which subsequent change/update/reject data records based on the selective conditions.
hope this helps.
Kindly assign the points if it works.
Revert back if u need futher help/information.

Collecting data from two R3 source systems

Dear All,
Scenario:
We are in the process of implementing SAP BI 7.0 in our organisation.
We have a single BI server (7.01) collecting data from two source
systems from two different divisions within the group.
The first system is of Company 1 where we have IS u2013 MILL (ECC 6.0).
BI has been implemented and running successfully in this unit. Now we
have started implementing BI in the second unit u2018Company 2u2019
where the industry specific solution IS u2013 AFS (ECC 6.0) is the source
system.
We are activating BI Standard Content for AFS. When we try to upload
master data, we face a problem.
The master data (0Division, 0Mat_Grp_3, etc.) is already loaded with
IS Mill data (data from the first source system). Now when the data is
loaded from IS AFS (second source system), wherever, the same key
exists in the info object, we notice that the existing data is
overwritten by the freshly loaded data, thus causing loss of existing
data.
A typical example is as follows:
BW Data u2013 Source system 1 u2013 (Before upload of data from source system
2):
0Division
99         EN          Stock Transfer Out
AFS Data (Source system 2) -
0Division
99         EN             STO
BW Data u2013 Source system 1 u2013 (After upload of data from source system 2):
After uploading the master data from AFS, the Values areu2026
0Division
99        EN            STO
The original data is lost.
Similar problem is noticed with other master data as well.
Please suggest the right methodology for upload of master data when
data to BW is sourced from two systems. How to retain the data in the
same Infoobject but at the same time maintain distinction between the
data from the two systems.
We donu2019t find any specific mention of such scenarios in the standard
documentation.
Will such a problem recur when we upload transactional data?
Regards,
Aslam Khan

Hi Aslam,
            Please use some compounding attribute for your master data object like Sourcesystem ID. While loading the master data from different source systems... you should have two different flows to fill the same master data object. In each flow you can specify the Source system ID as constant value ... eg SS1 (Source system 1) and SS2(Source system 2) in each of the data flows.   This should solve your issue without overwriting your master data
Thanks
Kishore

Deletion of Data from Infoprovider after upgradation of source system

HI All,
In our project source system is upgraded from 4.7 to ecc 6.
I have kept the same logical name and changed the RFC connection so that it points to new source system.
Now do i need to delete all data before uploading data from source system or it will be fine as source system name is same.
If i need to delete data ,can u help me how to delete master data especially Hierarchy data. do we need to Delete Hierarchy and recreate it.
Please help em to resolve this issue

Hi,
It depends on your requirements whether you have to keep the history or not.
If you delete the data from your info providers, you have to reload everything from scratch.
If you want to delete the data from all
1. first delete the data in data targets such as cubes, DSO's or ODS then
2. master data
use these programs to delete from se38
-> rsdrd_delete_facts - for Cubes and DSO or ODS
-> rsdmd_del_background - for master data in background
-> rsdmd_del_master_data_texts - for master data right away
manage your master data info objetcs after the deletion, if you still find them....
go to se14 and delete individually each and every table such as attributes, texts, sids, hierarchy.
hope it helps you better.
But I dont recommend you to delete try to load full repair options for all yur loads

No data in source system

Similar Messages

Maybe you are looking for