No Data records for COPA Extractor when using RSA3

Hi there,
I created a datasource for COPA (geenerated) and tried to test with Extractor Checker. There is no data records! What's wrong? Any idea? Thanks in advance!
Weidong

hi,
as Ashish wrote check in se16 if there are data for your selection criteria in tables you use in this datasource
if you use infoset check it in sq02 especially join conditions
if you use function module - test this module in se37
Regards,
Andrzej

Similar Messages

Insert new Master Data Record for an InfoObject using a Function Module

Hi @ all,
is there any Function Module for creating a new master data record for an InfoObject? Implementing a FM for inserting a master data record into a master data table is done quickly. I think there will be problems with inconsistency implementing a FM using a simple "Insert" Statement. Isn´t it?
I know it is possible to maintain an InfoObject in RSA1 (Master data IO> right click>Maintain Master data>execute(F8)> ...) but I have another requirement for using a FM.
Thanks!
Regards,
Johannes

use this
RSNDI_MD_ATTRIBUTES_UPDATE

Creation of HR master record For a user when a time entry role is added

Hi,
Description summary:Automating creation of HR master record For a user when a time entry role is added to a user account
Description detail:When time entry role is provisioned to a user account,the HR master record is linked,It is compleated after a user is created because a user id must exist .
It is part of the record.In addition the user must be hired into SAP in order for the HR Master Record to Appear in SAP.
What we need to do is when a 'Time and Personal Data Maintainer Role "is Added by the VIRSA_ADMIN user,automate the creation of the HR Master Record.
Transaction code :SU01 to add the role to the Account.
How to Create the User Exists For this RequestIts very urgent pls help me on this.
Thanks.
Vipin

Why do you need a User Exit? You can create a BDC on PA40 & kick it off upon adding the role..
~Suresh

[svn:fx-trunk] 10545: Make DataGrid smarter about when and how to calculate the modulefactory for its renderers when using embedded fonts

Revision: 10545
Author:   [email protected]
Date:     2009-09-23 13:33:21 -0700 (Wed, 23 Sep 2009)
Log Message:
Make DataGrid smarter about when and how to calculate the modulefactory for its renderers when using embedded fonts
QE Notes: 2 Mustella tests fail:
components/DataGrid/DataGrid_HaloSkin/Properties/datagrid_properties_columns_halo datagrid_properties_columns_increase0to1_halo
components/DataGrid/DataGrid_SparkSkin/Properties/datagrid_properties_columns datagrid_properties_columns_increase0to1
These fixes get us to measure the embedded fonts correctly when going from 0 columns to a set of columns so rowHeight will be different (and better) in those scenarios
Doc Notes: None
Bugs: SDK-15241
Reviewer: Darrell
API Change: No
Is noteworthy for integration: No
tests: checkintests mustella/browser/DataGrid
Ticket Links:
    http://bugs.adobe.com/jira/browse/SDK-15241
Modified Paths:
    flex/sdk/trunk/frameworks/projects/framework/src/mx/controls/DataGrid.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/controls/dataGridClasses/DataGridBase .as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/controls/dataGridClasses/DataGridColu mn.as

Hi Matthias,
Sorry, if this reply seems like a products plug (which it is), but this is really how we solve this software engineering challenge at JKI...
At JKI, we create VI Packages (which are basically installers for LabVIEW instrument drivers and toolkits) of our reusable code (using the package building capabilities of VIPM Professional). We keep a VI Package Configuration file (that includes a copy of the actual packages) in each of our project folders (and check it into source code control just as we do for all our project files). We also use VIPM Enterprise to distribute new VI Packages over the network.
Also, as others have mentioned, we use the JKI TortoiseSVN Tool to make it easy to use TortoiseSVN directly from LabVIEW.
Please feel free to contact JKI if you have any specific questions about these products.
Thanks,
-Jim

Choose accent color for hovered icons when using dark interface in Bridge?

How about add the ability to choose the accent color for hovered icons when using a dark interface in Bridge? Currently, the icon color remains orange and unchangeable. Personally, I would prefer a blue accent color to match my system. Any chance of making this possible in CS6?

Oh, I should add that I'm looking for solutions somewhat up-to-date and/or are related to or designed for 10.6 Snow Leonard. I did a search for answers before asking the question, and the (mostly unsatisfactory) answers I found were all from several years ago and applied to earlier versions of OSX (10.3, 10.4, etc.), and therefore no longer were relevant or usable.

How to transpose the data records (rows) to column(lists) using apd

Hi,
how to transpose the data records (rows) to column (lists) using apd in sap bw.
I do not want to use abap routine.only use the transpose rows to list transformation .
Pls provide the step by step procedure .
thanks,
Nimai

Save youe file to transpose as a csv and in the header row of your file for the columns you want to transpose you need to put some soer of a tag before the column name (ie your colum header was for a period budget will be something lie 2011001:ZFIBDD)
1. You will need to create a new apd process (rsanwb)
2. Insert a "Read from Data File" data source object and map it file (,csv)
3. insert a transpose object into your apd process (middle row 4th one over in the transformations section)
4. under the definition tab in the transformation object select all the columns that are to be transposed into rows and move them to the transformed area, the grouping fields section should contain the rows that you want to now be columns
5.under the transformation tab enter in the seperator you selected under the Field Name/Infoobject area (ie. ZFIBDD)
6. under the details tab you need to enter in all the fields to be transformed and tner the transposition field (ie ZFIBDD)
7. Then you can insert a set of transformations and a DSO and link the newly transposed fields into that.
hope that helps

How to solve the error message "Could not activate cellular data network: PDP authentication failure"when using 3g or gPRS on safari with an iphone 4 and latest software updates

Please can someone help me to solve the error message "Could not activate cellular data network: PDP authentication failure"when using 3G or GPRS on safari with an iphone 4GS and latest software updates. I have tried resetting the network and phone settings. I have restored the factory settings on itunes and still the problem persists.

All iPhones sold in Japan are sold carrier locked and cannot be officially unlocked by the carrier. If you unlocked it, it was by unauthorized means (hacked), and support cannot be given to you in this forum.
Hacked iPhones are subject to countermeasures by Apple, particularly when updating the firmware. It is likely permanently re-locked or permanently disabled.
Message was edited by: modular747

Any solution for 4280 error when using Itunes to burn CDs?

Any solution for 4280 error when using Itunes to burn CDs?

http://support.apple.com/kb/TA38101?viewlocale=en_US

What is a valid location for autorecovery files when using Word for MAC?

What is a valid location for autorecovery files when using Word for MAC?

Microsoft Word for Mac support forums is probably a better place to ask.

No Data Initialized for Purchasing Extractors (2LIS_02_ITM)

Hello Experts,
We are in R/3 4.6 C PI 2005, I am trying to fill the setup tables for Purchasing Extractors. I tried with different seletions. After executing the T-code OLI3BW, in RSA3 always it is showing 0 Records. Please advice.
Following is the Error message some times I will Get, If I have a selection( Ex PO NUmbers Rage, or Date Range) I wont Get any error message same time it wont display any other message.
=====
ABAP runtime errors    TABLE_INVALID_INDEX
       Occurred on     06/08/2009 at 14:00:13
>> Short dump has not been completely stored. It is too big.
1. "INDEX idx" for specifying the line number in the table
"\PROG=SAPLEINS\DATA=XMCEKET[]"
   where you want to change, insert or delete.
2. "FROM idx" for specifying the start index when deleting a line
   area from or inserting a line area into the table
"\PROG=SAPLEINS\DATA=XMCEKET[]".
3. "TO idx" for specifying the end index when deleting a line
   area from or inserting a line area into the table
"\PROG=SAPLEINS\DATA=XMCEKET[]".
How to correct the error
If the error occurred in one of your own programs or in an SAP program
that you modified, try to correct it yourself.
If the error occurred in a non-modified SAP program, you may be
able to find a solution in the SAP note system.
If you have access to the note system yourself, use the following
search criteria:
"TABLE_INVALID_INDEX"
"SAPLEINS " or "LEINSF2U "
"LIS_VERTEILUNG_LF"
============
Thanks.
Edited by: BPSNEW on Jun 18, 2009 10:38 PM

Hi Krishna:
Please check if SAP Note 1454260 - "BW/LIS: RMCENEUA dump with TABLE_INVALID_INDEX" is applicable to your system.
Regards,
Francisco Milán.

How do I get ALL the info records for a materials plants using an SAP FM?

I need to get all of the info records from the EINE table for a material - all of its sites (plants, we are using SAP retail).
The problem is this: I call the FM MD_INFORECORDS_READ - here is the code for my call:
CALL FUNCTION 'MD_INFORECORDS_READ'
          EXPORTING
            imatnr               = t_output_data-article <-- the material number
            iliefnr              = lv_eina_key < -- see below on how I get this
          importing
            eeine                =
          TABLES
            exp_eina             = it_eina
            exp_eine             = it_eine
          EXCEPTIONS
            no_eina_record_found = 2
            no_eine_record_found = 3.
lv_eina_key is taken from this call:
SELECT SINGLE altkn INTO lv_vendor_no
        FROM lfb1
        WHERE lifnr = lv_site (plant)
        AND bukrs = t_output_data-company_code.
The probelm is it only returns the first record it finds for each site. There could be multiple info records, each one based a a different Valid From date for each site. I need either ALL of the EINE records for each site OR the most current one
I know I am not using ALl of the parms in the FM - but are there maybe there are other ones should I be using.
Perhaps there is there another FM I should be using - cause I do not have the info record number to pass.
Thanks.
Scott

Never mind - the FM does work - this was bad data.

Valid size not available for this creation when using Greeting Card feature

Using PSE9 with a Mac. When attempting to create a greeting card, after selecting the photo, the Greeting Card, I receive a pop up error message as follows:
"Valid Size Not Available For This Creation". (All other Create functions such as Photo Book, Photo Calendar, and Photo Collage appear to be working). I have been in contact with Adobe Support and have been instructed to do a number of things from creating a new preferences file to uninstalling and re-installing the PSE software, with no result. Has anyone else run into this problem, and if so have found a fix? Thanks.

I've been tearing my hair out over this one also. I've been on hold for over 10 hrs with Adobe Support waited over almost 2 weeks and still no resolution. I'm trying to create the Save the Date cards for my wedding and I can't wait for Adobe. Removing the preferences file and uninstalling/reinstalling does not fix the problem.
That said I did figure out a workaround for this. It's easy but it does require Windows. For me this was no big deal as I do own a Windows box.
Get the free trial version of PE9 for Windows and install it. If you don't have a Windows computer get to a friend that has one
Upload some of your photos to the PE9 Windows Organizer (it's identical to the mac version)
Select Create and then Greeting card. Photoshop will launch the guided edit feature for greeting cards.
Select the Layout feature and once you find out that you like save it as Photoshop project. Repeat this step for as many layouts as necessary.
Copy your Photoshop project files (and any folders) to your mac.
Open the project files as you would with any other Photoshop file.
You can now select the Create feature. You will be able add your pictures and resize them, you will be able to add/remove text, you'll be able to change the backgound/borders, add graphics...pretty much anything...EXCEPT automatically modify the layout. If you click on Layout, PE9 returns nothing. You can however go into full edit mode and if you have decent Photoshop skills you can make any changes to the layout manually.
If I had to put money on this I'd say that there is a problem with the PE9 Mac installation package. For some reason it is not deploying the layout data/files or it is not putting them in the right place. For this reason the program can't find the layouts when the user selects the greeting card guided edit.
Good luck.

Need advise for best practice when using Toplink with external transaction

Hello;
Our project is trying to switch from Toplink control transaction to using External transaction so we can make database operation and JMS operation within a single transaction.
Some of our team try out the Toplink support for external transaction and come up with the following initial recommendation.
Since we are not familar with using external transaction, I would like member of this forum and experts, to help comment on whether these recommendation are indeed valid or in line with the best practice. And for folks that have done this in their project, what did you do ?
Any help will be most appreciated.
Data Access Objects must be enhanced to support reading from a TOPLink unit of work when using an external transaction controller. Developers must consider what impact a global transaction will have on the methods in their data access objects (DAOs).
The following findSomeObject method is representative of a finder in the current implementation of our DAOs. It is not especially designed to execute in the context of a global transaction, nor read from a unit of work.
public findSomeObject(ILoginUser aUser, Expression queryExpression)
ClientSession clientSession = getClientSession(aUser);
SomeObject obj = null;
try
ReadObjectQuery readObjectQuery = new ReadObjectQuery(SomeObject.class);
readObjectQuery.setSelectionCriteria(queryExpression);
obj = (SomeObject)clientSession.executeQuery(readObjectQuery);
catch (DatabaseException dbe)
// throw an appropriate exception
finally
clientSession.release();
if (obj == null)
// throw an appropriate exception
return obj;
However, after making the following changes (in blue) the findSomeObject method will now read from a unit of work while executing in the context of a global transaction.
public findSomeObject(ILoginUser aUser, Expression queryExpression)
Session session = getClientSession(aUser);
SomeObject obj = null;
try
ReadObjectQuery readObjectQuery = new ReadObjectQuery(SomeObject.class);
readObjectQuery.setSelectionCriteria(queryExpression);
if (TransactionController.getInstance().useExternalTransactionControl())
     session = session.getActiveUnitOfWork();
     readObjectQuery.conformResultsInUnitOfWork(); }
obj = (SomeObject)session.executeQuery(readObjectQuery);
catch (DatabaseException dbe)
// throw an appropriate exception
finally
if (TransactionController.getInstance().notUseExternalTransactionControl())
     session.release();
if (obj == null)
// throw an appropriate exception
return obj;
When getting the TOPLink client session and reading from the unit of work in the context of a global transaction, new objects need to be cached.
public getUnitOfWork(ILoginUser aUser)
throws DataAccessException
     ClientSession clientSession = getClientSession(aUser);
     UnitOfWork uow = null;
     if (TransactionController.getInstance().useExternalTransactionControl())
          uow = clientSession.getActiveUnitOfWork();
          uow.setShouldNewObjectsBeCached(true);     }
     else
          uow = clientSession.acquireUnitOfWork();
     return uow;
}

As it generally is with this sort of question there is no exact answer.
The only required update when working with an External Transaction is that getActiveUnitOfWork() is called instead of acquireUnitOfWork() other than that the semantics of the calls and when you use a UnitOfWork is still dependant on the requirements of your application. For instance I noticed that originally the findSomeObject method did not perform a transactional read (no UnitOfWork). Has the requirements for this method changed? If they have not then there is still no need to perform a transactional read, and the method would not need to change.
As for the requirement that new object be cached this is only required if you are not conforming the transactional queries and adds a slight performance boost for find by primary key queries. In order to use this however, objects must be assigned primary keys by the application before they are registered in the UnitOfWork.
--Gordon

Asset value date at the asset posting when using F-90

Hi,
I have an asset and the first acquisition date was 10.30.2009.
I'm using the transaction F-90 (external aquisition with vendor) with posting key 50 for credit entry, 70 for debit asset and the transaction type is 100.
Why the asset value date at the asset posting is equal first acquisition date (10.30.2009)? If I'm posting 12.17.2009 the asse value date woudn't be 12.17.2009?
Regards.

Hi
The first Acquisition Date will be the Asset Value date.
When ever you going to do more Acquisitions they will be added on to that Acquisition Amount but on the Particular Dates of Acquisitions and Asset Value Date will remain the same as First Acquisition date.
Whether you do Acquisitions using F-90 or through Settlements, the Asset Value Date will be the 1st Acquisition Date.
regards
Venkat

How to make reference wbs custom data carried to new wbs when using custom tab and custom table

I created a custom tab for WBS elements by using user exit CNEX0007 and custom screen and put a table control in it.
As table control's data has to be stored in a table I could not use append structure of PRPS.
When I used reference wbs, PRPS custom fields were carried also but I could not find any solution to fill table control data with reference table.
I need to get correspondence between reference number's and new id's key data. Is there any exit, enh. that I can store the relationship.

Solved...
I've used an enhancement point in include LCNPB_MF38. CJWB_SUBTREE_COPY exports a table called newnumbers. Here you can find correspondances between copied WBS and new WBS.
Exported table to memory id.
And imported it in another user-exit. You can use proper user exit for your need. ( EXIT_SAPLCNAU_002)

No Data records for COPA Extractor when using RSA3

Similar Messages

Maybe you are looking for