No data result in transfer from CRM to BW

Hello,
we have a problem because we are not able to send data from CRM to bw, using a copy of standard extractor 0CRM_OPPT_H.
A few days ago, the extractor was working properly, but suddenly we get "no data" error message. Executing RSA3 transaction in CRM side, data is recovered but starting the extraction from BW, we always get the "no data message". We have tested it with full, init loads, and all options: "Only psa", "Data targets only", "parrallel", and "PSA and then data targets".
Does anybody have any idea???
Thanks in advance, Inma

Try to replicate the datasources and activate the source system assignement and load the data.
hope it will work.
Regards

Similar Messages

Data transfer from CRM to R3

What exact data transfer from CRM to R3, on completion of a sales Order. I am new in the field, need some good example?

HI Sajjad,
Transafer of order from CRM to R/3 involves following activies.
Setup RFC destination between CRM & R/3
Create a R/3 Site (Transaction: SMOEAC) and assign a subscription named
(Sales Document (Mesg) created from publication Sales Document(Mesg)).
In R/3 maintain Document type with same name as Transaction type in CRM, item category with same name as item category in CRM, Item category determination with same as in CRM.
Master data i.e. Product in CRM should be present with same name as material in R/3. BP in CRM should be present with same name as Customer in R/3
Organizational data is maintained in CRM.
Best Regards,
Pratik Patel.
Reward with points if it is of any help to you!

Data transfer from CRM 2.0 to CRM 7.0

Hi, Can we use XIF adaptor to transfer data (for ex : BP) from CRM older versions(for ex : CRM 2.0) to CRM 7.0.
If yes, pls share some documentation to do it.
One thing I know is XIF adaptor has been available since CRM 3.0 and is not available in CRM 2.0.
Pls let me know if there is any other technique to do this.
Thanks in advance.

Well the help for LSMW is pretty detailed:
http://help.sap.com/saphelp_nw70/helpdata/en/4d/455035082e2271e10000009b38f889/frameset.htm
It explains all the steps in detail of the tool and the overall process. Plus if you use LSMW there is a "step-wizard" menu that lists what you need to do in a step by step fashion. I think if you start up the LSMW screen and read this specific help page:
http://help.sap.com/saphelp_nw70/helpdata/en/87/f3ae74e68111d1b3ff006094b944c8/content.htm
That should help you understand how to use the tool. You will need to decide on your conversion target, which if you follow the blog link I sent you, then you can use the XIF adapter IDOC inbound with LSMW. You'll just need to read the function module documentation in your CRM 7.0 on the CRMXIF_*_SAVE module (where * is the object anme) to review the approriate steps.
If you need to attach images to documents please look at the class CL_CRM_DOCUMENTS(I believe). Do a search in this forum(open the timeframe to all of time) and there are several discussions on this.
Here is another article(do a search on LSMW in SCN for blogs/wiki/articles) and you will find lots of great stuff:
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/40fb9091-21bc-2d10-6cb2-f6c310ef6244?quicklink=index&overridelayout=true
Take care,
Stephen

Data transfer from CRM to SAP R/3

Hi All,
Please let us know how to transfer the data from CRM(sibel) system to SAP R/3.
I want to pull oppurtunity data from CRM to R/3 system.Could somebody throw some idea on this please.
Regards
Mahesh

1. Using XI middleware.
2. CRM(sibel) ---> intermediate table ---> SAP R/3.
Pradeep

Sales Order transfer from CRM to R3

Hi experts,
I'm working on SAP CRM system (release 6.0). I'm trying to transfer a business transaction, a sales order, from CRM to R3 but, when I go to the transaction "SMW01" in order to check the BDOCS, I face this errors:
- "No authorization for maintaining sales documents in [client organizational unit][distribuition channel][division]";
- "R/3 adapter is called";
Nevertheless the opposite flow is performed: all the sales documents created on R3 are tranfered to CRM.
All the queues are registered.
The CRM business transaction has the same configuratiosn of the corresponding sales document in R3.
Do you have any suggestions?
Thanks and regards,
Stefano

Hi Stefano,
did you check the user authorization in R/3? The scenario you've described is possible it the user the R/3 uses to connect to CRM has full authorization, however the user the CRM system uses to connect to R/3 not.
Regards
Wolfgang

My itunes library has gone following a laptop rebuild. I do have my iPod which is up to date - can I transfer from the iPod to the library or will the iPod lose all its data if I snyc?

My itunes library has gone and is empty following a laptop rebuild. I do have my iPod which is up to date with music, photos, apps etc - can I transfer from the iPod Touch to the library or will the iPod lose all its data if I sync to the laptop? PLEASE HELP!

I'm guessing you've got iPod touch 2nd generation
iPod touch 2nd generation only goes up to 4.2.1, so you'll need a newer generation...
iPod touch 3rd generation only goes up to 5.1.1
4th and 5th generation both go up to iOS 6.1.3, wich is the current latest version.
Hope this helps
Stijn

Exporting data into excel sheet from CRM

Hi All,
I am facing problem while extracting data from CRM - Service Process Monitor.
I tried to extract data(records) from executed service process monitor through
System -> List ->Save->Local file->Spreadsheet
I am not getting actual records list in excel sheet
For example: Actual record - 244, But after extracting to excel sheet its showing only- 199
why its not extracting remaining 45 records/ transactions.
is there any setting or is there any other process of extracting ?
How to count total records without extracting to excek sheet ?
Please help me..
Regards
Praveen Khot

Hi
check the link below
https://www.sdn.sap.com/irj/sdn/crm-elearning
Reward points if helpful
Dinaker vikas

Company code data for custom replicated from CRM

Hi,
I am trying to default the company code data for a BP replicated from CRM as a customer but it is not working.
How should this be done in CRM 7.0, ECC 6.
I am have so far copied function module SAMPLE_INTERFACE_DE_BALE, added my own code and created the entry in table TBE34. But it doesn't work. Is this correct or is there another method?
regards
Tim

This is what we did wen we had a similar requirement...
u2022     In the ECC create a FM u2018Z_USER_EXIT_BEFORE_SEND_TO_MWu2019.
u2022     Register this function module for the CRM0_200 exit user in the ERP system.
a.     Use Transaction SM30, table TPS34, to go to the maintenance of the modules. Here, enter the Z_USER_EXIT_BEFORE_SEND_TO_MWu2019 module for the CRM0_200 process.
b.     Use Transaction SM30, table TBE24, to check whether the application you have selected (Product column in TPS34) is active.
u2022     The FM will be triggered whenever a Sold gets successfully replicated from CRM to ECC system.
a.     Check for the Object Class u2018BUPAu2019.
b.     Check for the Object Name u2018CUSTOMER_MAINu2019.
c.     If yes copy the BP GUID from the BAPIMTCS Structure.
d.     Now call rfc FM ZLSD_BP_EXTRACT_FRM_GUID in CRM to get the BP number and Acc Group for the respective GUID.
e.     Check if the ACC GRP is Z001.
f.     If yes make a BDC call to transaction FD01 and update the Company Code data u2026. Recon. Account     110000
                             Terms Of Payment ZN30
                           for the respective BP
Note: we have recorded a BDC program to create the company code data.
regards,
Sameer Ahamad

Scenario for data transfer from CRM to BW

Hi Guru's,
Could any one tell me what kind of scenario (e.g. file to file, Idoc to file etc) is used to transfer the data between the following systems using XI interface:
Also, tell me how we can do it......
1. CRM to BW
2. Informatica to BW
3. R3 to BW
4. Oracle to BW
Thanks in advance. I will assign you the points
Regards,

Hi Bharath,
it mainly depends on:
1) what you have to transfer, custom data, standard data (for SAP business logic e.g. customer/delivery)
2) how you need the transfer mode to be (synch/asynch)
3) the volume of data
4) the frequency of data transfer
Consider that a typical scenario for interfacing SAP systems like CRM/R3 with XI is mainly based on IDocs/RFCs/proxy,..
In general when communicating from XI to BW you should prefer Proxy (the first link explains in details why).
I suggest you to have a look at these links:
How to Push Data into BW from XI
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/18dfe590-0201-0010-6b8b-d21dfa9929c9
How to do BW - XI scenario
How to do BW - XI scenario.
XI-BI Integration
/people/kamaljeet.kharbanda/blog/2005/09/16/xi-bi-integration
Re: SAP BI and SAP XI integration
BI-XI Integration
Informatica to BW
http://www.informatica.com/FR/solutions/integration/sap/informatica_sap_bw.pdf
Getting data from external system
Getting data from external system
Real World Scenarios of SAP XI
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/e17fdb90-0201-0010-2cb6-fe937f3bfd97#search=%22CRM%20to%20XI%20scenario%20site%3Asdn.sap.com%22
CRM - XI integration
XI to CRM XIF Connection
Kind Regards,
Sergio

Billing doc transfer from CRM to ECC debugging

Hello Experts,
I have made enhancement to the badi BILL_ACC_IF method ENRICH_ACC_DOCUMENT and would like to know the way to debug this code when the transfer of billing doc occurs (middleware). Is that possible? If yes, can you please let me know how?
Thanks,
--Jamie.

Hi Jamie,
    Sometime back I had these kind of issue, I was not able to stop the debugger at break-point.
For these type of things, I will write some simple code in BADI and you should have required authorizations. If you use this option, don't forget to remove the code.
   Write below some sample code at the place, where u want to start debug
   data l_exit.
    do.
      if l_Exit = 'X'.
         exit.
      endif.
    enddo.
    Here a process will be running conitnuously.
   Now go to SM50,
     select your process.
       From Menu select
             Program/Session
                 --> Program
                      --> Debugging.
        when you select this, the debugger will popup and cursor will be at above code. Now in debugger change the value of L_Exit to 'X'. control comes out from the do...enddo , and from here you debug it.
//Bhanu

Z field dat to be transfer from SO to Purchase Requestion

Hi
I am faing one problem
I have created 1 Z field in Sales Order and the have created the same field in Purchase Requestion.
Now how i can transfer Z field data from SO to PR. What is the procedure and configuration i have to do.
Pls confirm.
Regards
Vicky

Hi Pls reply which user Exit , i should apply for transfering Z filed data from SO to PR.
This is 3rd party process and we have added a Z field but we need to transfering data from SO to PR.
Which User Exit will use to perform this process

QM-Result Recording transfer from one material to another material

Dear QM masters,
I have following scenario:
Material A has Material B as a component and Material B has Material C as component. Material A is batch managed. Material C has in-process inspection with partial lot using inspection point functionality. Last result recorded for this in-process inspection should be used for quality certificate of Material A.
Thanks a lot in advance for any help extended and will be rewarded with maximum points.
Thanks and regards,
Devang

Since you are in ECC 6.0 you can also use batch derivation to have the components values copied to the next material being made. In this way, batch values for Material C get copied to material B batch and material B batch values get copied to Material A batch.
Then on the cert, you only need to report the value from the material A batch. No need to set up the result from production chain in the COA profile.
Craig

Data Migration from CRM 4.0 to CRM 2007

Hi experts,
we have transaction data to be migrated from CRM 4.0 to 2007, the transactions are having followup transactions, how can we transfer the transactions along with follow up transactions to CRM 2007, can any one share the documents, i know it can be done with idoc meathod. can any one suggest what are the pre requisites and what is the role of CRM consultant here.

Okay the only question is that is your CRM 40 system and the CRM 2007 separate systems? If so then you can use the XIF IDOC adapter to setup the transfer between the two systems.
Now if the CRM 40 system is being upgraded to CRM 2007 then you don't have to "transfer" data.
As far as the CRM consultant role, you better understand basic IDOC setup and be able to do data mapping between the older and newer version. Luckily you shouldn't have a lot of mapping work as 2007 IDOC structure is a refinement of 4.0.
For more XIF information search the CRM general and framework forum.
Take care,
Stephen

How to transfer hierarchy level 1 or level 2 in Contract from CRM to ERP?

Hi, Pro,
        I face a requirement that hierarchy in contract transfer from CRM to ERP by RFC, but the material number what we wanna to entry are maintained in hierarchy 3. Therefore after you entry the hierarchy 1 or 2 that not 3, it occur an error warning stop the process.
       Since I test manual entry a hierarchy by added a character '*" behind, it save and successfully archived that can using hierarchy 1, 2 and 3. I thought I solved the problem. But our ERP source is from CRM, so the only confuse me is that it can not transfer character '*' from crm to erp when it accour error like can match the hierarchy '12345*' .
      Pls help me solve this solution.
Thanks a lot.
Lorry

I am using the bapi BAPI_CONTRACT_CREATEFROMDATA and BAPI_CUSTOMERCONTRACT_CHANGE.

Replication Of Z Partner Functions from CRM to ECC

HI All,
We are creating the " Z Partner Functions " in SAP CRM & ECC.in our scenario partner functions flows from CRM to ECC and we want to replicate these partner functions from CRM to ECC.
So can some onle please tell me how to do this?.
Thanks in Advance,
Arun

1. Create the partner function in ECC
2. Assign the partner function to the relevant partner procedure in ECC
3. Create a partner function in CRM
4. Map the partner function as follows:
Customer Relationship Management
--> Basic Functions
--> Partner Processing
--> Data Transfer
--> Distribution of Partner Functions from R/3 into CRM
Create the following entry:
Partner function in R/3 Function
and also the below:
Create a mapping entry for data transfer from CRM to R/3 via the
following IMG activity in CRM:
Customer Relationship Management
--> Basic Functions
--> Partner Processing
--> Data Transfer
--> Distribution of Partner Functions from CRM into R/3
Create the following entry:
Function R/3 function Type in R/3

No data result in transfer from CRM to BW

Similar Messages

Maybe you are looking for