No data return after Service Pack installation

Post Author: Tati
CA Forum: Publishing
Hello all.
I am using Crystal Server XI (BOE11) with Service Pack one. I had a report with a FULL OUTER JOIN that returned data before the installation of the service pack. Now it doesn't return any data. Can someone please help?
Thanks in advance.

Similar Messages

What are the key components to be mointored after support pack installation

I m an PI developer ,last Friday Basis installed the service pack 15 in Quality box . They are asking me to mointor the QPI to make sure everything is running fine and let them know so they can install the service pack in Production box.
Apart from normal monitoring of the system ( RWB and SXMB* ), what are the other components i need to monitor.
Can you tell me what to be monitored after Support pack installation.

Hi,
1) If CCMS is configured then you can monitor this as well (RZ20)
2) Keep an eye on Queues
Regards,
I m an PI developer ,last Friday Basis installed the service pack 15 in Quality box . They are asking me to mointor the QPI to make sure everything is running fine and let them know so they can install the service pack in Production box.
Apart from normal monitoring of the system ( RWB and SXMB* ), what are the other components i need to monitor.
Can you tell me what to be monitored after Support pack installation.

Symbian Anna Service Pack installation cancelled i...

How can I check if I have the service pack installed correctly?
In Applications - SW Update - Options - View Update History I see:
Symbian Anna service pack - Installation cancelled
In Settings - Phone - Phone management - Device Updates I have:
Release: Symbian Anna
Software version: 022.014
In App Manager - Installed applications - Logs the last entries are:
Metadata System Upgrade - Installed
Java Runtime Update (2.0) - Installed
Conversation Server 1.58 - Installed
messaging 1.59(0) - Installed
Am I missing any components? Do you all have service pack cancelled? Is there any way to reinstall service pack? Cannot see it in updates or in Nokia Suite.
Thanks.

when you click on the "software update" icon, after the check don't you see the option to reinstall?
Greece Nokia X6 RM-559 v40.0.002
Attachments:
Capture.PNG ‏33 KB

IQ770 crashed after service pack 1 automatic update.

after service pack one was downloaded ,while on line i would get kicked off.eventually windows wouldnt boot up,and then received a blue screen with an error message saying windows has shut down to prevent further damage to the computer.then the computer would only boot up in safe mode.i tried system restore in safe mode,but it did not work.i called hp technical support. they told me i need to do a system recovery.i tried a system recovery through the hard drive, it went through the whole process,and i thought it was going to work,but when it was time for windows to boot up the computer froze.the tech said i need to purchase a recovery cd and it should work.i ordered it and i followed the directions and ran the cd.when the disc was complete the screen was white,and there was no response of any kind.then after a few hours i shut the computer off.when i turned it back on there was nothing but a screen with vertical colored lines,and no response.i have had the computer for 14 months when this happened.i don't know what to do? has this happened to anyone els?

hi, ive got almost the same problem. I just haven't followed through on the back-up as far as you have. good thing, it looks like. I've almost filled my hard drive, now going on 19mos later. i wish i could help. my video is fine, i think. ive ran every free malware, virus, defender and anti spyware prog i could find for this. and got rid of a lot of supposed threats. but the problems get worse and worse. lately i cant get my hardware to work right. seems one thing after another one piece or another seems to go out. weird thing is: the drivers say they are totally updated just for some reason not working and needs to go online but wireless and ethernet both have "hardware connection errors" so i cant get the sucker online. then my system speakers are out. ive tried uninstalling, disabnling, updating via sd card and hp and microsofts sites (all the trials and errors not necessarily in chronological order) but i dont know what to do. winlogon shuts off, oembios shuts off, now i look over and windows explorer keeps going out aaaaaaarrrrrrgh, i dont have that much money to get new warranty. <text deleted> since i cant get online with mine its not up to me when i can check my email. but if someone wants to try and troubleshoot this with me via messenger if im on or email id really appreciate it. im at a loss cuz im normaly the it tech to go to for vista, but now im lost and would really appreciate any and all info or idea...even if ive tried it, maybe my sequencing was off and im willing to retry ....thanks
Message Edited by WendyM on 08-24-2009 08:13 AM

Workflow errors after service pack upgrade

Hi all,
We have a problem with workflows after service pack upgrade. Workflows are working fine in Development system but not on test and production. Generating lot of dumps.
What could be the reason for this ?
'Start verification workflow' in SWU3 is giving error 'Workflow: No workflow definition found'.
Thanks in advance

Getting series of short dumps 'CALL_FUNCTION_REMOTE_ERROR'
Error while calling '
call function 'RH_GET_WFD_ID' destination 'NONE''
But RFC destinations are working fine.

SQL service pack installation

Installing SQL 2005 through SQL4SAP.VBS will install its available service pack 2 automatically (or) Do we need to install manually.
Can we install the service pack 2 manually even after SAP Installtion .If so,please give the procedure.
Thanks

Hi,
Installing SQL 2005 through SQL4SAP.VBS will install its available service pack 2 automatically (or) Do we need to install manually.
It will automatically install in the process of SQL server installation.
Later you can even install SP3 which is available on Microsoft website.
Regards
Rajesh Narkhede

After Service Pack 2 update sound stopped working

Recently started again with my Satellite laptop. All was good and everything worked perfectly until i download Service pack 2. Ever since doing that the audio has stopped working.
I'm a bit novice but have tried the following:
I uninstalled the driver and downloaded the appropriate drivers from the Realtek website. reinstalled but still get the same problem. no error messages but just "Driver is enabled but has not been started" in the properties screen for the sound and device properties.
Can anyone offer a solution?

Hi
Youre right. I have read that on some notebooks the sound doesnt work after XP SP2 installation.
But the update instillation should help.
Could you please post you notebook name?
At this page you will find a list of Windows XP Service Pack 2 supported models:
http://support.toshiba-tro.de/kb0/FAQ5300V6000DR01.htm

MSCS SQL Server Service Pack Installation

Dear All,
We are using Microsoft Cluster and i completed Microsoft SQL Server 2005 Installation on Cluster.
Now when i am trying to Install Service Pack 2 of SQL Server i can't get success when both node are running.
But when i swhiched off Node 2 and did installation on Node 1 i get success.
But after finishing Installation on Service Pack 2 i can't get that service pack on Node 2.
Here i want to confirm that i have to do installation of Service Pack 2 on both node ?
Regards,
Nikunj Thaker.

Hi,
Have you run the SQL 2K5 SP2 upgrade on the other node. What happens is that you upgrade the SQL Server binaries on the Clustered instances but not the local files.
If you run SP2 on the "Passive" node it will upgrade server compoments that are not cluster aware (like SSIS). I normally upgrade the Client Components first on the passive node, reboot and then upgrade all components on the active node afterwards.
On a standalone machine - all components are upgraded at the same time - both per instance and the server components so you won't have that issue.
--Kishore

Does Service Pack installation modify the repository db ?

Hello,
Does anybody know if installation of Service Packs on a old XI R2 platform modify in some way the repository database ?
The purpose of this question is this :
My production platform is XI R2 SP1, and I would like to upgrade to SP4 without any risk for my users.
To do that, I wonder if building a new platform with SP4, testing, and then shutting down the old CMS and linknig the new CMS to the production repository would work.
It should be the case if SP doesn't need new structure or data on the repository database...
Can anybody confirm that this works ?
Thanks in advance

Hi Francois,
I presume you're on some flavor of Windows. If that's the case, do the following to copy the CMS db (once your new system is up and working):
1. Stop the CMS from the CCM.
2. Right-click on the CMS --> Properties.
3. Switch to the configuration tab.
4. In the CMS Data Source section, click on Specify.
5. Select Copy data from another Data Source.
This will copy data from your Production data source to your new environment.
As for the FRS, you do not need to copy the FRS folders. Once your CMS db is copied, you only need to point the I/O FRS of your new (SP4) environment to the FRS locations of your old(SP1) environment.
Please do ensure that everything is backed up though (i.e. FRS folder structure and CMS db).
Also, if Auditing is enabled on your SP1 deployment, it would be best to turn off auditing before stopping the CMS, copying the CMS db.
Best,
Srinivas

Intel-based PC constantly rebooting after Service Pack 3 install

I know many of people were having this problem, but since my PC doesn't have an AMD processor, I'm not sure what to do.
My PC is an HP Pavilion with an Intel Pentium 4 3.0 GHz. I don't exactly know the model number and since I'm away from home I can't look at it right now.
I installed Service Pack 3 the other day and I'm getting the common error where the computer is constantly rebooting. I'm hesitant to do what the following link suggests since it seems to be only applicable to AMD computers:
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c01457284
I can't boot in Safe Mode nor the last known working configuration. I don't have the recovery disks and I don't have a copy of XP for reformatting either. I figure my answer is in the Recovery Console?
Since I can't post from home this'll be a slow process. What should I do? Thank for reading!

Try altering the Windows registry key as follows. Once it is completed then once again begin installation of SP3:
1. Click Start - Run - Type “regedit” and press enter.
2. Navigate to
HKEYLOCALMACHINE
\Software
\Microsoft
\Windows
\CurrentVersion
\Setup
3. In the right pane, Right-click and select New - String value
4. Name it as “BootDir” and set its value to “C:\”
This should help. Try installing SP3 and should work fine.
Axel F.

Need SQL Server service packs installation procedure

Hey Guys,
I am in the process of installing service packs to my SQL Server 2008 and R2 editions, I was searching for the installation procedure in technet for this but nothing was provided for this, I tried to read the
"readme" and setup documentation provided in the SP 4 download page but its useless since its redirecting again to some other page which again points to same download page, It makes me wonder if there are any procedures provided by Microsoft for
this. Let me know if anyone has it. I don't want to follow any third party websites/ individual bloggers providing best practices/installation procedures.
My Environment: SQL SERVER 2008/ R2 (STANDARD) and these are standalone
machines.
OS: Windows server 2008 R2 STANDARD
With regards,
Gopinath.
With regards, Gopinath.

Copy the patch files to the server
Run the patch file and follow the on-screen instructions
Select the instances that you wish to patch
Allow the patch to finish
Reboot if a reboot is required (the patch will tell you if there were any locked files)
For more info refer this link
Please Mark this as Answer if it solved your issue
Please vote this as Helpful information if it helps to solve your issue

Unable to activate after Service Pack 2 for Microsoft Office 2010 (KB2687455) is deployed

I'm having a very strange issue with deploying the "Service Pack 2 for Microsoft Office 2010 (KB2687455)". Here's what I see:
Deploying to a Windows 7 SP1 system fully patched as of 7/29/2013
Using SCCM 2007 R3
Task Sequence installs Office Professional Plus 2010
Task Sequence installs Service Pack 2 for Microsoft Office 2010 (KB2687455)
The Office Professional Plus 2010 install was configured to use our key using the Office Custimization Tool (setup.exe /admin)
When I try to activate the suite using any of the installed applications (word, excel, outlook or powepoint) I get the error "An unspecified error has occurred. Your request cannot be processed at this time. Please try again later. (0x80070190)"
If I repair the install then try the activation again it works right away. This is a good work around for single installs but for my needs of multiple system deployment and for pushing out the Service Pack 2 for Microsoft Office 2010 (KB2687455) to other systems
in my environment this will not work.
Can anyone please suggest a solution to this problem?
Thank you,

Hi
According to my research, this issue occurs when one of the following conditions are true:
If you have CD emulation software installed, a registry key is preventing the hardware ID from being acquired.
A required registry key is not set correctly or is missing.
If you want more detailed information, please refer to the following link:
http://support.microsoft.com/kb/2400124/en-us
Hope it helps
Regards

SharePoint 2013 Update Workflow Manager problems after Service Pack 1

Hello guys,
I've installed the service pack 1 for SharePoint 2013 and then I tried to update the workflow manager, but I always get an error message that the workflow manager could not be updated!
Is the installing order wrong? should I first install the update for the worklfow manager and then the update for SharePoint 2013?
Best regards
Matthias

The error message see below for "Cumulative Update for Workflow Manager 1.0 (KB2799754)
"One of the custom actions failed. The installation cannot continue. See log for details!"
[06/06/14 09:48:44] Performing install.
[06/06/14 09:48:44] At least one of the product packages has been detected.
[06/06/14 09:48:44] preReqUpdateDisplayName is :
[06/06/14 09:48:44]
[06/06/14 09:48:44] Wizard mode on.
The following products will be enhanced:
Workflow Manager 1.0
Attempting to open cached Msi package for product code: {04A7199E-565D-4654-88A3-80A9A7BADDD9}
Successfully opened cached Msi package.
[06/06/14 09:48:48] Opening Service Control Manager...
[06/06/14 09:48:48] Operation succeeded.
[06/06/14 09:48:48] Copying files...
[06/06/14 09:48:48] Checking and creating target directory C:\ProgramData\Microsoft\E-Business Servers Updates\Updates\Uninstall2799754.
[06/06/14 09:48:48] Package Workflow Manager Client 1.0 is not installed. Skipping it.
[06/06/14 09:48:48] Package Workflow Manager Client 1.0 is not installed. Skipping it.
[06/06/14 09:48:48] Package Workflow Manager 1.0 is installed.
[06/06/14 09:48:49] Copying file AppServerV1-WorkflowManagerpatch30.msp ...
[06/06/14 09:48:49] Operation succeeded.
[06/06/14 09:48:49] Copying file AppServerV1-WorkflowManagerpatch30.msp ...
[06/06/14 09:48:49] Operation succeeded.
[06/06/14 09:48:49] Copying file TargetWFVersion.txt ...
[06/06/14 09:48:49] Operation succeeded.
[06/06/14 09:48:49] Copying file UnifiedWFHotfixUpgrade.PS1 ...
[06/06/14 09:48:49] Operation succeeded.
[06/06/14 09:48:49] Copying file Setup.xml ...
[06/06/14 09:48:49] Operation succeeded.
[06/06/14 09:48:49] Copying file Setup.exe ...
[06/06/14 09:48:49] Operation succeeded.
[06/06/14 09:48:49] Package Workflow Manager 1.0 is installed.
[06/06/14 09:48:49] Package code is {04A7199E-565D-4654-88A3-80A9A7BADDD9}.
[06/06/14 09:48:49] Executing preinstall custom actions. 1 actions to execute.
[06/06/14 09:48:49] Starting process "C:\Windows\system32\..\sysnative\windowspowershell\v1.0\powershell.exe" -NoLogo -NonInteractive -NoProfile -WindowStyle Hidden -ExecutionPolicy RemoteSigned -File UnifiedWFHotfixUpgrade.PS1 -HotfixType "CS" -PackageType
"server" -opcode "PatchBefore" -platform "x64" ...
[06/06/14 09:48:50] Process exit code is -1.
get-itemproperty : Cannot find path 'HKLM:\Software\Microsoft\Service Bus\1.0'
because it does not exist.
At C:\ProgramData\Microsoft\E-Business Servers
Updates\Updates\Uninstall2799754\UnifiedWFHotfixUpgrade.PS1:971 char:21
+ $sbinstallpath = (get-itemproperty "HKLM:\Software\Microsoft\Service
Bus\1.0" ...
That's the log file
Best regards
Matthias

Tx2510us - Fingerprint Reader Not Detected after Service Pack 1 for Windows 7 installed

Have had Windows 7 32-Bit installed and running fine since early last year.. Today Windows Update installed Service Pack 1.
Now, the fingerprint reader (AuthenTec AES1610) is not detected. Digital Persona reported the fingerprint reader isn't connected and the Device Manager shows installed and working properly.. When the computer boots, the logon screen shows not detected..
Have seen several older posts that reference a page with a fix for AuthenTec/Digital Persona, but get a 403 error when trying to access..
Hoping someone still has this info, or possibly there's a new fix to work with Service Pack 1..
Thanks
~~~~ Nothings forgotten. Nothing is ever forgotten. ~~~~

Followed the given advice: installed SP1 again, ran Firefox in safemode, disabled other running programs as mutorrent, still Firefox didnt work. I had internetconnection (after restarting mutorrent this did work, the app telling me what the weather outside is worked) but no Firefox: as previous time I got the start screen, but could not browse the internet.
I also tried to start the Internet Explorer and it also looked as if that application had problems (but that can also be because I did not use it for a while - old version or whatever - and it is not my standard browser).
Have again performed a roll back in order to remove SP1, now Firefox works again.
If somebody has advice it would be very welcome!

Regarding Service Pack installation

Hi Guys,
Excuse my ignorance on the subject but could any of you tell me if the installation of a service pack is client dependent?
Let's say that I have a DEV, a QAS and a PRD clients.... can I install a service pack in DEV first and then move the changes to the following systems?
Many thanks,
Brodo

Hi,
When SPs are applied in one instance or system, It is available in all clients of that instance.
SPs have to be applied in all the systems in the landscape.
Hope this helps you.
regards,
Kevin Hill

No data return after Service Pack installation

Similar Messages

Maybe you are looking for