No data selected for printing in production server t.code J1INCERT
Dear Gurusl,
I am facing a issue to tds certificate printout through t.code J1INCERT in production server. My client has booked the invoice in the month of march 2011 & remittance, bank updation is done in the month of 30th Apr. 2011. But while taking the printing out it the error No data selected for printing 8000I. So I need some permanent solution.
For invoice booking fiscal year is 2010 & remittance, bank updation it is 2011.
Regards
Sachin Patil
Dear:
Check whether you have selected the relevant tax types for invoice posting while posting the vendor invoice. If its correct then Vendor Master data, Section/Business Place code Address data. Check tables in SE11
J_1IEWT_CERT_N
J_1IEWTCALID_N
J_1IEWTNUMGR_N
In these tables section codes might have been maintained directly. Please check these for any discrepancies.
Regards
Similar Messages
-
No data selected for printing message no 8I000
Dear All
At the time of printing J1INCHLN certificate getting error NO DATA SELECTED FOR PRINTING MESSAGE NO 8I000 , where we have data in vendor's A/C and TDS is deducted at vendor's A/C .
Some vendor under the same section allow us to print the certificate, but the in case of few vendors we r
facing the problem.
As we need to send the same to vendors help is needed.
VG.we sorted out the issue
-
Message No: 8I000 - No data selected for printing
Dear All,
I need inputs for resolving this.....please help me out...
Issue Description:
When i am doing J1INCERT, for one company code it is working properly...but for one specific company code it is giving the error that No data selected for priting (message no 8I000) that to specifically in one client only....where for the same company code in another client it is working.
I've checked all the settings, and tables which are client specific, and finally i didnt succeded in finding the route cause of the error.
Can someone have any idea why this error is coming.....and can give some insight abt this to resolve.
Thanks
Rajawe sorted out the issue
-
Problem with cheque printing in production Server Tcode - FBZ5
Hi
Cheque Printing using SAPScript with TCODE FBZ5.
I had a problem with cheque printing in production Server. TCODE - FBZ5
It is working fine in Development Server with proper alligned data but not coming alligned data in production server. I compared, dubugged and checked the allignment...there is no difference I found.
Could you please let me know, where the problem is occuring.
The amount is not coming properly and coming out of the box.....but it is coming properly in development server.
SekharHi,
For Amount field you must print like &amount(C)&. And it must be printer settings only. Because i gor same like this error while printing cheque. at that time Basis team had made the changes in printer settings. -
Need a single point of view on date selections for Delta and Full load IP's
Hi Experts,
Every year we are facing issues on date selections for data extraction, for example the Delta or Full selections for particular IP is like 2005 to 2008 , in this situation, for the year 2009, this IP is picking 0 records as the selections are upto 2008 only.
My requirement is, I need to check the selections of all the IP's in the system and want to change on need base if the selections are getting expired instead of going and checking manually to each and every IP as the system is having around 3000 IP's, which is a tedious job.
Guys, please let us know if there exits a Table/Program or any other way to check it.
Inputs appreciated.
Regards
NanduHi
Persistent through module RSSM_SHIP_PSEUDO_DVERSION_WRI
Primary table RSLDPIOSH
RSLDPIO Links datasource to infopackages
RSLDPIOT InfoPackage Text Description
RSLDPRULE ABAP source code for InfoPackages
RSLDPSEL Hardcoded selections in InfoPackages
RSMONICDP Contains the request-id number by data target
RSPAKPOS List of InfoPackage Groups / InfoPackages
http://help.sap.com/saphelp_nw70/helpdata/en/2e/20d704d45be7458582cdfcc5487090/frameset.htm
Hope it helps -
How to configure data source for MS SQL 2005 Server.
Good morning,
While creating a data source for MS SQL 2005 Server, what are the values I should use for:
Object Factory, DataSource Type, and CPDS Class Name values ?
Thanks
SeenuseenuFour wrote:
Hi,
I am working on a web application, the backend of which is a MS SQL 2005 server. I am creating a data source on the application server to manage the connection pool.
Hence I need to give the following values while creating the data source:...
Hence you need to provide some actual detail about what the context is.
IIS runs "web applications" but your question would have no meaning in that context. On the other hand it might have some meaning if you were running Tomcat. -
Hw can I generate XY graphs directly in a vector data format for printing ie pdf
A further question re. Printing of Graphs
There are many similar questions but none where the answers are acceptably adiquite or two or three were the link was broken,
"Developer exchange forums have been moved" and a pointer to the new
site, unfort it was hard to find or guess the rest of the link.
So here is my angle on this problem;
So far I have tried;
Using property node: "App. Printing.Default Printer" to select the printer to use, then
Using Report Functions to print controls;
New Report, to generate a new report reference
Set Report Orientation
Set Report Margins
Set Report Font
Set Report Header Text
Set Report Font
Set Report Footer Text
loop for each page
Set Report Footer Text, With page number
Append Control Image to Report, several times
New Report Page
Until the end of the last page
Print Report
Dispose Report
Initially using existing XY-Graph controls from the front panel. These
are on a page of a Tab control to hide these controls while not in use
and allow them to be hidden while generating the printout.
Unfortunately when this page is hidden any graph scales set to
autoscale don't, (normally don't need to and would otherwise be a waste
of processor time), resulting in graph plots going off scale or
becoming a line along the axis.
An issue is that what is printed appears to be read from the screen, so resolution is much
lower than required for for printing, resulting in rather pixellated
printed versions. These prints will usually be emailed, so tried the
pdf995 "printer driver" but the resulting pdf file size is rather large.
Currently trying Plot-XY on a much larger picture so as to get
adequate resolution for printing, however suspect this will result in
much larger pdf files and probably cause other problems.
The preferred solution in this case will probably be to generate print
output, instead of based on raster images (ie jpg or png), but on a
vector format, maybe via postscript or directly in pdf format.
Similar graphs currently printed from Excel via pdf995
(or OpenOffice) result in files around 20 kb per page. these can be printed at any size
(at least upto 64 times) without becoming pixellated, so assume these
are vector based.
Currently a page with 4 XY Graph controls uses around 40 to 45 kb per
page but resolution is poor and overcoming that may push file size up
to 150 to 200 kb per page, and the whole job can be 50 to 100 pages.
Are there any functions to generate XY graphs directly in a vector data format preferably in pdf or via PostScript format.
Cheers
DarrylHi Darryl,
I was able to reproduce the issue you were seeing, in which a report generation was taking up a large amount of space per page in a PDF utility. I found; however, using my attached VI (notice that it is set to *.png) and the CutePDF utility (free download at http://www.cutepdf.com/) I was able to get a per page size of about 10 KB. Also using the png I found that the image quality seemed to be quite high.
Please try incorporating this solution into your application and see if it reduces your file sizes.
Thanks and have a good evening!
Cheers,
Jonah
Applications Engineer
National Instruments
Jonah Paul
Marketing Manager, Embedded Software
Evaluate the LabVIEW RIO Platform! - ni.com/rioeval
Attachments:
print_XY Graph.vi 23 KB -
Setting date format for the entire SQL Server installation - SQL Server 2008 R2-2012
Hi,
I need to safeguard the behaviour of SQL codes that inserting into SQL tables with some date columns. For this purpose, I need to change the date format for the SQL instance and not using CONVERT and CAST.
I've seen the SET DATE FORMAT statement, but if I use it, could I solve my problem?
ThanksThe language setting is related to the database user.
BOL: "DEFAULT_LANGUAGE = { NONE | <lcid> | <language name> | <language alias> }
Specifies the default language for the new user. If a default language is specified for the user and the default language of the database is later changed, the users default language remains as specified.
If no default language is specified, the default language for the user will be the default language of the database. If the default language for the user is not specified and the default language of the database is later changed, the default
language of the user will change to the new default language for the database."
LINK: http://technet.microsoft.com/en-us/library/ms173463.aspx
The default language setting can be overridden by SET LANGUAGE for the session:
http://technet.microsoft.com/en-us/library/ms174398.aspx
Example:
SET LANGUAGE us_english; -- mdy
SELECT CAST ('12/13/2014' as DATE); -- 2014-12-13
GO
SET LANGUAGE british; -- dmy
SELECT CAST ('12/13/2014' as DATE);
GO
(1 row(s) affected)
Changed language setting to British.
Msg 241, Level 16, State 1, Line 2
Conversion failed when converting date and/or time from character string.
Kalman Toth Database & OLAP Architect
SELECT Video Tutorials 4 Hours
New Book / Kindle: Exam 70-461 Bootcamp: Querying Microsoft SQL Server 2012 -
Data cleanup for customtables in production system.
Hai,
My requirement is a list of custom tables data should be deleted in production system based on some selection-criteria.
Any one can suggest how we can achive this.
Shall I write any Zprogram or any other way.
I have written code for one table .
Reprot ZTesdel.
Tables : YDCS_COMP_CR.
DATA itab1 type STANDARD TABLE OF YDCS_COMP_CR.
SELECT * FROM YDCS_COMP_CR INTO TABLE ITAB1.
DELETE YDCS_COMP_CR from table ITAB1.
Please any one can tell the same code will work for deleting records from YDCS_COMP_CR or any other piece of needs to added?
Regards,
KrishnaDepending on the nature of the data, there might be a legal retention period to be observed.
Also check for dependencies to other tables, foreign keys, so you don't end up with a corrupt database.
If it is data in the GB range, don't delete in one chunk, or the redo buffers might overflow. Instead fetch packages of x records, delete them and do a commit work before reading the next package. Use OPEN CURSOR WITH HOLD and function DB_COMMIT for this purpose.
Thomas
Edit: just saw this is a continuation of
custom tables data deletion (data cleanup)
zprogram to custom table data deletion
Please now work with the information provided so far before coming back with more questions. -
Start Data Selection for Header Tabels fail
Hi!
The above mentioned activity fails because tabels COEP and COBK are vergy large and it seems that I run into a time out.
I found the note:
1166229 - Customizing the select statement within Fill Header Reports
I' am not a CO spezialist and I don't know which field I could take to add additional selection criterias on this tabels.
As much as I understand this tabel save CO data and since I transfer with TDMS just the last 2 month of our production system, my idea is to select e.g. just year 2009 for COEP and COBK.
Any hint or proposals??
BR
WernerHi,
1. Check if all the recommendations as per note 890797 are followed.
2. If yes, run the troubleshooter for the activity.
3. Here, under "Change Technical Settings for Conversion Objects", change the size category for the table to Large.
4. Go back to the Troubleshooter screen and run "Troubleshooter for Conversion Objects" -> "Automatic Repair"
5. Restart Data Selection
Hope this resolves the issue.
Regards,
Suman -
Migrating Endeca Application and Data from development to a production server
We need to move an Endeca app (including data domain) to a production server from a development server
I installed EID 3.1 in the prod server successfully and this is what I did after the install:
1. Created a new application in Studio (name: JULY2014POC)
2. Manage Pages - Import the .lar file
3. Copy JULY2014POC.worddat file and JULY2014POC_indexes folder to new server, location: domains/endeca_server_domain/EndecaServer/data with all the servers down. Then restarted endeca server, ps server, and studio server.
4. When I try to create an Endeca Server connection it gives me error (Connection definition format is valid but unable to connect.)
5. This is my entry:
"contextPath": "/endeca-server",
"currentFunctions": [],
"dataDomainName": "JULY2014POC",
"name": "JULY2014POC",
"port": 7001,
"restrictedToRoles": ["Administrator"],
"server": "10.2.192.171"
6. When I run any endeca-cmd at OS level I get the following Warning (4 times):
$./endeca-cmd.sh list-dd-profiles
<Oct 29, 2014 4:51:33 PM EDT> <Warning> <oracle.wsm.resources.policyaccess> <WSM-06210> <An instance of the interface oracle.wsm.policymanager.IUsageTracker bean for the local repository at path "" was not available for configuring the oracle.wsm.policymanager.accessor.BeanAccessor repository accessor for context "ResourcePattern [pattern=DOMAIN/weblogic/endeca_server_domain, subjectType=MANAGED_DOMAIN, terms={PLATFORM=weblogic, SUBJECT_TYPE=MANAGED_DOMAIN, DOMAIN=endeca_server_domain}]".>
default
What am I doing wrong? Can someone please help me? thank youHi Sergio,
How the data import and export works is what you have to look into. Whenever you export your content it gets exported to a particular directory. If the same directory should be referenced by the code base as well which would be mentioned in the properties file for fetching the configurations.
If they are not aligned they won't pick it up. Also you will have to create pages like endeca-server and make it the default page in your properties file.
Hope u cross this hurdle soon.
Thanks
Karthik V -
How to deploy selected components on the production server with the same solution
Hello,
We've a production server where we had deployed the visual studio based solution which contains all the web parts and their business logic. Production server is up and running live and end-users have started using it as well.
Now, some issues and change requests have been reported regarding some components (web parts). We've made all the relevant changes. However, I want to deploy only those selected components (web parts) instead of entire solution again.
So, as per my understanding, if i include the selected components in the package/feature then at the time of deployment, wsp retracts the old solution and deploys the new one. When the new one won't have those web parts which didn't updated then portal/site
will start giving error and site will be collapsed.
Another option is to create another farm solution in Visual Studio 2010 and add the updated components in it. Then, we may be able to deploy it. Then, i'll be able to remove the old web parts from the selected pages and deploy the updated one.
Is there any better option which anyone could let me know?
Thanks!
Sohaib KhanHello,
We've a production server where we had deployed the visual studio based solution which contains all the web parts and their business logic. Production server is up and running live and end-users have started using it as well.
Now, some issues and change requests have been reported regarding some components (web parts). We've made all the relevant changes. However, I want to deploy only those selected components (web parts) instead of entire solution again.
So, as per my understanding, if i include the selected components in the package/feature then at the time of deployment, wsp retracts the old solution and deploys the new one. When the new one won't have those web parts which didn't updated then portal/site
will start giving error and site will be collapsed.
Another option is to create another farm solution in Visual Studio 2010 and add the updated components in it. Then, we may be able to deploy it. Then, i'll be able to remove the old web parts from the selected pages and deploy the updated one.
Is there any better option which anyone could let me know?
Thanks!
Sohaib Khan
Hi Sohaib, your another option is a good idea, only make sure to retract and remove the original from your farm, the add and install the new updated solution. And if you run into any error that says features already exist, you can use powershell, install-SPSolution
and -force to get the new solution deployed. http://tinyurl.com/q8erz72
Or, you could use Upgrade-SPSolution with a package that has same features from original, with the new artifacts. Although, if any of the original features are modified, I would recommend retract remove redeploy.
Stacy www.sharepointpapa.com -
No output has been selected for printing in Proforma Invoice
Hi,
I have created PO for STO and delivery (Delivery Type NL) through billing VF01, billing type (JEX) and creation of excise invoice, T-code u2013 J1IIN with reference to Proforma Invoice, it is working fine.
I have maintained the billing output (JEX) in condition records (T-Code- VV31). When I have save the proforma invoice and selected the issues output system showing Error u201CNo output has been selected for printingu201D Message no. VF302"
Can any body tell me what is problem for configuration steps or I have missing any steps?
Useful answers duly rewarded
Regards,
DevendraHi Devendra
check the following things :
Go to VF02 ->header data ->output-> click on analysis
Check the access sequence (key combination) in your output type details.t.code V/40.
check wheather the output procedure has been assigned to the output type or not
check the condition record has been maintained or not VV31 . If maintained check the key combinations entered, transmission medium also .
Regards
Srinath -
Is JRE engine is free for deployment on production server?
Hi
I have developed one application for commercial purposes. Now, I would like to ask question that JRE engine of java which is required for application deployment is free or we have to buy a license to actully deploy that on production server?Sun License Agreement for Java Runtime Environment Standard Edition
-
Automatic change of data selection for full update
Hi,
I have created datasource for full update and load data mannulay on weekly basis by date selection in infopackage.
If I want to schedule the job on weekly basis, is there any way to change the date selection in infopackage for each data load.
i.e. if the previous range was 1st to 7th for full update, then next it should become 8th to 14th.
Regards,
Pravin.Hi,
Go to that infopackage - dataselection tab - calday field - there will you will type (near to TO value ) - there enter 6 for abap routine and give the name..
Eg :
data: l_idx like sy-tabix.
read table l_t_range with key
fieldname = 'XXXXXX'. " XXX- techname
l_idx = sy-tabix.
data : date_low like sy-datum,
date_high like sy-datum.
date_high = sy-datum - 1.
date_low = sy-datum - 5.
l_t_range-low = date_low.
l_t_range-high = date_high.
l_t_range-sign = 'I'.
l_t_range-option = 'BT'.
modify l_t_range index l_idx.
p_subrc = 0.
Here in the above eg , we are loading daily data from the interval of last 5 days.. ( from 03.02 to 07.02.08)
Hope you have got an idea..
Regards,
Siva.
Maybe you are looking for
-
Error in configuring Mail Adapter
Hello Friends, I am working in XI 2.0 I am trying to configure the Outbound file adapter for sending the Mail. and i configure my adapter as File adapter java class classname=com.sap.aii.messaging.adapter.ModuleXMB2File mode=XMB2FILE ##Adress for XMB
-
Outgoing payment with Zero amount when Full adance is paid
I am making A/P down payment request based on purchase order, then I make full payment of PO (full advance payment - no amount of payment left with) through "Outgoing payment" which creates negative amount in Business partner balance and shows a nega
-
regarding a graph made from spreadsheet data... how do i make a best fit line to a set of points? also, is there a way to find the slope and intercept of this line? Thank you!
-
My new Macbook Pro 13" won't register properly on our school's projectors when I try to run PPT (Epson EB510)! Instead, colored bars go across the screen against a black background. No matter how much I try to adjust the displays, PPT won't show on
-
Blackberry 9330 won't let me add my g-mail account
I had this set up and something happened. I deleted the account and tried to re-set it up and it keeps telling me that my account or password it incorrect. I can go right to g-mail and login with the same account info so I don't know why this is ha