No data selected in data source 2LIS_04_PECOMP

Hi SAP BI Experts,
We are facing issues while extracting data from infopackage u201CFULL /
2LIS_04_PECOMP InfoCube 0PP_C08u201DData source u201C2LIS_04_PECOMPu201D.
We have deleted the erroneous data from cube 0PP_C08 date range
26.02.2009 to 2.03.2009. Now while extracting the data (Full load
infopackage) from data source no record selected message displayed.
In PSA no data selected. We have checked in RSA3 as well no data
selected from 26.02.2009 to 03.03.2009.
Please note that Delta Infopackage for same data source is working fine.
Full Infopackage & RSA3 extracting data till Dec 2008 but 2009 no data available.
Note : Action Taken
DELTA is enabled on this data source, since the day we went LIVE. And because of the RECENT erroneous data deletion,
We want to repair the data by running the FULL upload for the week. But when we run the full repair upload info package,
we get no result. We tried running RSA3 for the same week, that also returned no records.
RSA7 still shows the record ; since the DELTA is active. Hence the data is available in the queue.
2. Not sure of this but I tried to setup the statistical data using OLIFBW u2013 Reorg REP manufacturing , it gives the message,
DataSource 2LIS_04_PECOMP contains data still to be transferred Message no. MCEX024.
My log in NPRT does not show any records. I checked the setup table MC04P_0COMSETUP, there is no data.
Kindly suggest the next step to get this data from 2LIS_04_PECOMP.
Please help us on this.
Thanks & Regards
Abdul Karim

Hi,
and to fill the set up tables..
Re: No data selected in data source 2LIS_04_PECOMP
Re: No data selected in data source 2LIS_04_PECOMP
rgds,

Similar Messages

Selection of a field in data source

Hi,
I have to select the check box for a field in the Selection column of a data source. But the field is in non editable mode.
Can any body please let me know how to make the field editable.
Thanks
Sasidhar

Hi Sam/Chandran,
Thanks for your quick response. But here I am doing exactly how you said, by going into RSA6 and changing the data source. But the other fileds are in editable mode and only the filed which I want to select is in non-editable mode. May be any other reason for this?
Thanks in advance.

How do I select a data source for my webapp?

Wel, I'm obviously not looking in the right manual because this ought to be like falling off a log!
I have developed a web application in JDeveloper 10.1.3 and I'm deploying it (using a WAR file) to an OC4J container in OAS 10.1.3.
I have created a JDBC data source (JNDI location jdbc/bmra89) to connect to a 9.2.0.7 Oracle database and testing this through the interface is successful. The data source is associated with a new Connection Pool.
I ensure that a default data-sources.xml file is NOT bundled into my WAR file from JDeveloper (because the database I want to connect to from the OAS is different to the database I want to connect to from the deployed web app) so it should be looking for one it builds itself. In fact, data-sources.xml exists in the j2ee/<webapp_name>/config directory that contains the details of the data source and connection pool I created.
During deployment of the generated WAR file, I have chosen to Edit the Deployment Plan and in here I have entered the name of the data source (jdbc/bmra89) into the box labelled "defaultDataSource" and the boxes labelled "connectorsPath" and "dataSourcesPath" I've left empty.
It all deploys OK, but when I try to access a page I get the following error:
500 Internal Server Error
JBO-30003: The application pool (model.AppModuleLocal) failed to checkout an application module due to the following exception:
oracle.jbo.JboException: JBO-29000: Unexpected exception caught: oracle.jbo.JboException, msg=JBO-29000: Unexpected exception caught: oracle.jbo.JboException, msg=JBO-29000: Unexpected exception caught: oracle.jbo.DMLException, msg=JBO-26061: Error while opening JDBC connection.
at oracle.jbo.common.ampool.ApplicationPoolImpl.doCheckout(ApplicationPoolImpl.java:1954)
So, any ideas where I'm going wrong? (I have to admit to being pretty lost with all this!)
Thanks,
Andy

Let's try to do this as easy as I'm capable of explaining.
Deploy the EAR to the Application server/OC4J standalone that you're trying to configure without modifying or removing any of the files in the EAR or WAR file and using all of the defaults.
Now start up the Application server control in you choice of web browser, my URL is http://localhost:8888/em.
After logging into the console select the "Adminstration" Link, and there will be List of Administration Tasks, one of which being the JDBC Resources under, Services.
After selecting the JDBC Resources "Go to Task" you will see 2 areas, Data Sources and Connection Pools. Somewhere in all of this you should see the jdev-connection-pool-bmra89, jdev-connection-managed-bmra89, and jdev-connection-native-bmra89.
I normally modify the jdev-connection-pool-xxxxx first to use the correct URL connection. IE- jdbc:oracle:thin:@localhost:1521:bmra89 to jdbc:oracle:thin:@138.51.128.100:1521:bmra89, changing localhost to a specific database IP address.
Then I'll click the Apply, and then go back and do the same to the jdev-connection-native-bmra89.
At this point you should be able to test the connections successfully, and get the Web Service to connect.
I hope I've covered it and that this helps, and you're not being thick. The data sources part of this stuff can be confusing.
Darren

How to select column dynamically with sharepoint list as data source in ssrs report

Hi all,
I am creating reports from SharePoint list but i have requirements to select the column name dynamically with SharePoint list as data source. I didn't find any way of doing this..
Can anyone help me to resolve this issue..
There is no way of specifying column name dynamically here in data set query
<RSSharePointList xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
<ListName>test list</ListName>
<ViewFields>
<FieldRef Name="ID" />
<FieldRef Name="ContentType" />
<FieldRef Name="Title" />
<FieldRef Name="Modified" />
<FieldRef Name="Created" />
<FieldRef Name="Author" />
<FieldRef Name="Editor" />
<FieldRef Name="_UIVersionString" />
<FieldRef Name="Attachments" />
<FieldRef Name="Edit" />
<FieldRef Name="LinkTitleNoMenu" />
<FieldRef Name="LinkTitle" />
<FieldRef Name="DocIcon" />
<FieldRef Name="ItemChildCount" />
<FieldRef Name="FolderChildCount" />
<FieldRef Name="test_x0020_date" />
<FieldRef Name="title2" />
</ViewFields>
</RSSharePointList>

Hi MNRSPDev,
Sorry for the delay.
According to the current description, I understand that you want to specify column name in dataset query designer dynamically when using SharePoint list data source.
Based on my research, this is not supported by default. As a workaround, you can use XML data source. The XML content can be embedded directly within the query. This lets you use the expression capabilities within the processing engine to build queries and
data dynamically within the report. And it can be used for retrieving XML data directly from an external data source, passing it using parameters, and embedding it within the query.
Reference:
http://www.codeproject.com/Articles/56817/Dynamic-Reports-with-Reporting-Services
Hope this helps.
Regards,
Heidi Duan
Heidi Duan
TechNet Community Support

'Select a measure:' stuck on 'Loading...' in Dashboard Designer KPI Dimensional Data Source Mapping

[using SharePoint 2013 Enterprise SP1]
I am trying to create a KPI in Dashboard Designer, but am getting a timeout. I have been doing this for a while on my site; this is not the first. I haven't had this problem before.
I created a new KPI and clicked on the Data Mappings column value, which is a hyperlink, to bring up the Dimensional Data Source Mapping dialog. I switched to a Data Connection in the site I just created (DC works perfectly and can retrieve sample data).
When I click the "Select a measure:" drop-down menu, I get the message "Loading..." and after a while (a minute? two?) a dialog pops up with:
The request took too long to complete. SharePoint is currently unavailable or experiencing heavy traffic. Try again later.
This is a test SP server and I'm the only one on it, so there is no load. Also as mentioned, I am able to verify the Data Connection without problem. I am not having any issue with any of my other few dozen KPIs/Data Connections. Any suggestions as to how
to troubleshoot?

Hi cgtyoder,
According to your description, my understanding is that you got an error when you created a KPI in Dashboard Designer.
Please try to recycle the PerformancePoint Services Application Pool account, compare the result.
Please go to C:\inetpub\wwwroot\wss\VirtualDirectories\the port of web application, adjust the HttpRuntime executionTimeout for the Web Application by modifying the web.config, now PerformancePoint report stability is much better:
<httpRuntime executionTimeout="600" maxRequestLength="51200" />
Note: before you change the web.config file, please make a bakcup for the file.
If this issue still exists, please go to the log file to find more information about this issue.
I hope this helps.
Thanks,
Wendy
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Wendy Li
TechNet Community Support

How to select from multiple output tables in the SAP Data Source

Hi,
We're using the SAP Data Source to display SAP data in our portal from the Bapi: BAPI_INFORECORD_GETLIST. When defining the Bapi Meta Data we can select data from one of the two output tables (INFORECORD_GENERAL and INFORECORD_PURCHORG). But we want to select data from both tables (some columns we want to show are in INFORECORD_GENERAL and some are in INFORECORD_PURCHORG) .
How can we do this ?
With regards,
Ramon van der Weiden

You can query multiple TimesTen databases, but your original question was about joining tables from two databases, which is not supported.
Using Cache Connect to Oracle to query an Oracle database is not distributed. It's still one single Oracle database you are querying. You cannot join a table in the TimesTen database with a table in the Oracle database, this is not allowed.
If you are willing to share your business requiremens, we can take a look and see what solution might work for you. Would you like to discuss this offline?
Susan

Select More than one Data Source in UM Configuration

hi,
We configure our portal EP 6.0 with the CRM Dev system, such that the users created in CRM Dev system reflect in portal as well.
now the problem is in CRM Test system. when we create users, users are going to create in CRM test system.but our portal is configured with CRM Dev system.
is there any way to configure portal with both CRM Dev system users and CRM test system users.
thanks

See Select More than one Data Source in UM Configuration

BOXI3.0: Universe and Local Data Source Selection

Hi all. I am Alias.
I have one question. For the full XI3.0 installation, one of the products is Web Intelligence Rich Client.
In Web Intelligence Rich Client, we can have Data Source Selection which is Universe and Local Data Source. But for Web Intelligence/InfoView, we can only select universe, or maybe canu2026 I need to explore more but still could not find it.
Hope you guys can help me on this matter.
Best regards,
Alias

Hi Jacques.
Thanks for the link.
WRC we need to install for every user desktop right? But for Webi/inforview we only install at server.
In term of licensing, how it works?
Regards,
Alias

Selecting data source in physical view in OBIEE 11G when using sql server

Hi,
I doing my physical view against a 2008 R2 SQL Server. Looks like the list goes upto 2005. Should I select 2005 in that case? As per image: http://i.imgur.com/3H7MO.png
Cheers.
I am using OBIEE 11G 32bit Windows.

Hi,
Yes can. either you can select as SQL 2005 or ODBC basic also can
I hope your version less than obiee11.1.1.5.0, version 11.1.1.1.6.0 and above has update SQL 2008 in the data source selection list.
refer,
http://imgur.com/JSYoL
Thanks
Deva

Select field and hide field at data source ganaration for LO extrction

Hi GURU,S
Could any one tell me what is differce between select field and hide field at data source ganation in LO at r3 side.what happend if u select field and hide field.
Regards.
hari

Hi Hari,
If you choose Select fields, you'll be able to filter this IO in Selection tab of infopackage (set IO's value(s) to be loaded).
In case of hide field you'll not have it in the transfer structure at all.
Best regards,
Eugene

Delta field not enabled for selection in generic data source

Hi
I have created a generic data source for the table VBFA....and for the delta pick up i have put the delta option as CALDAY on the field ERDAT...and i have selected that field for the selection option. but after i made it delta enabled the selection option got disabled.
Now when i check the info package delta selection tab that date column is not apperaing.
But when i have to run the info package for the first i dont want all the data as it has a huge set of data.
I wanted to take only this months data.
So is there any option to be set to enable this selection in info package.
please suggest.
Regards
Shilpa

Hi there,
That's the stardard behaviour. If you use delta based om ERDAT, that field won't be available for selecting.
You could for example try to build a view over VBFA, and let the field ERDAT there and another field, for example ZERDAT (that is just another alias for ERDAT). Create the delta based onyour view over the field (ERDAT), but you can still control the restrictions over the extractore with your ZERDAT.
I don't know if this is possible, this is only an assumption.
Another option could be first to create an extractor based on the table VBFA but without delta, that field ERDAT would be available. Do your full data restricting it, and after that, change your datasource to use deltas based on ERDAT. It will be unavailable than, but since you've already loaded previous full data, you could than use your delta like it is. But here, remember, your deltas will bring new and change data based on ERDAT. If it brings delta based on changed data over ERDAT to a record that you didn't brought over your full (only some data), it will be incorrect records.
Also just an assumption, did not try it.
Diogo.

Field Selection in Generic Data Source

HI Gurus,
I created a Generic Data Source for Text master data upload and checked language key as selection so that I can use this field in Info Package on BW side to upload data for a perticualr language. I dont see any field in Data Selection tab of Info package.
Any help in this regard?
Thanks

Hi Raj;
This is standard procedure...when you have checked the selection on your datasource; you should be able to see the field in your Infopackage. Try to see if you have others column also got checked for example: hide column for this field; if it is uncheck it. Also after you have done this change make sure you save the datasource and replicate it in BW side. Try to crate also a new Infopackage ...just in case.
Hope this helps.
BK

0FI_GL_4 data source input selection screen

Dear experts,
I have enabled the input selection option tickfor fields PRCTR and KOSTL in data source 0FI_GL_4 with RSA6.
Both the fields are available in extract checker RSA3 too. But while does not have any effect while running the extractor. PRCTR and KOSTL are not having any effect while using in selection screen. Kindly let me know if any process there to enhance the standard program by putting the extra field in the selection (open cursor).
Jigar

Hi Leandro,
First, if you want to change a selection field, you need to do it in RSA6, checking the selection flag. I wouldn't touch the table..
Not always the filter is just checking the flag, I don't know particulary 0FI_GL_4, but the filter might be done in the Function Module logic.
Where have you updated that field? 0GL_ACCOUNT is an infoobject, so it's in BW. If you want to filter in the InfoPackage, you need to filter in ERP, so it's a field (HKONT) and not an Infoobject.
For 0FI_GL_4, if you check transaction RSA2, you'll see that selection is impossible, so I'm not sure if changing the table value manually would be enough.
Hope this helps.
Regards,
Diego

Adding one more selection field in the standard data source

Hi SAP Gurus,
I'd like to know how to add one field as a selection field for the data source.I used 0FI_GL_4 Datasource .It has 2 selection.Now I want to add one more field as a selection field .How to mark that field as selection?I tried by using RSA6 ,But I'm unable to change the previous selection.
Please let me know how to fix it?
I'll assign the points ...
Thanks & regards
Raja

Pradip,
when ever you create any Generic DS, you can find generic DS(I checked this), comming append fields(it's happend to me)... there is no meaning.. as we know... we will extract the data for append fields using existing DS.
Comming Raju:
to my knowledge, you should not add that field as selection enabled(wait for others posts). I had seen many posts for working on this... by updating the Table ROOSFIELD table for the respective DS. I never implemented this... if you update this using any custom program be careful. Ihave ccreated the program for append fields not for Standard Extractor.
Try to search any SAP Notes: 571985
All the best.
Regards,
Nagesh Ganisetti.

XSL - dynamically select XML data source

I need to create an XSL file that will be used to transform
one of many XML
files. The XML files are structurally identical, but they
contain different
data. I would like pass a parameter (most likely in the query
string)
identifying the appropriate XML to an ASP page that includes
an XSL
transformation that would select the appropriate XML file as
its data
source. Can anyone point me in the right direction?

Perhaps you did not set to evaluate the variable as expression
Arthur
MyBlog
Twitter

No data selected in data source 2LIS_04_PECOMP

Similar Messages

Maybe you are looking for