No data services after 3.1 upgrade

Hi All,
Just did the upgrade to 3.1 on my iPhone 3G and it is now telling me I cannot activate cellular data network, I'm not subscribed to a cellular data service. there was no issue prior to the upgrade. I can't browse or receive any of my corporate mail. HELP!!!

I'm having the exact same issues iwth my phone after I upgraded. The only way to get this issue fixed is to hard boot the iPhone.
Does anyone have any thoughts on this one?

Similar Messages

IPad Data Lost After OS 5 Upgrade

Hello,
I recently upgraded to OS 5 on my iPad. Everything went okay EXCEPT I lost data within apps on my iPad. I contacted the app vendor, and although they had some useful suggestions, I cannot locate the lost data.
When I go to restore from backup, it's the same data as AFTER the upgrade so that doesnt't help me. I use Time Machine on my iMac which I snych with this iPad, but I don't know what file to look for since everything is embedded in iTunes (the backups and files for the iPhone and iPad).
Any suggestions? I know the data has to be there, but I don't know where to look.
Thanks very much.

I am a bit unclear as to what you are saying. iCloud retains the last three backups per device. Are they not available in your case? Please see the attached link in its entirety. If you need more help please give a more detailed account of what has / is happening. http://support.apple.com/kb/HT4859

Unable to login to presentation services after doing the upgrade 10g to 11g

Hi All,
I had a running instance of OBIEE 11g 11.1.1.6.0, my 11g rpd and webcatlog was working fine. Imp to note is that, I had configured external LDAP authenticator and wasn't using the weblogic embedded LDAP.
Now, today, I had to updrage 10g RPD and Webcatlog to 11g and merge into the my current 11g system. I ran the upgrade utitlity and it completed the upgrade successfully but now when I try to login into presentation services using the weblogic user, the presentation services gets hung. It doesn't even give me a message like "Invalid login or password" I DON't get any message but my Presentation services and RPD gets hung( when I try to open it online)
Also, I am trying to refresh the GUIDs after making the necessary changes in the config and instanceconfig.xml file i start the obi server and presentation server, it doesn't come up. So I am unable to refresh my GUIDs
What could be issue here? Do I need to fix an credential file? Please let me know.
Thanks,
Ronny

Ronny wrote:
Hi All,
I had a running instance of OBIEE 11g 11.1.1.6.0, my 11g rpd and webcatlog was working fine. Imp to note is that, I had configured external LDAP authenticator and wasn't using the weblogic embedded LDAP. Was LDAP access working fine before upgrading the 10g rpd and webcat?
Now, today, I had to updrage 10g RPD and Webcatlog to 11g and merge into the my current 11g system. I ran the upgrade utitlity and it completed the upgrade successfully but now when I try to login into presentation services using the weblogic user, the presentation services gets hung. It doesn't even give me a message like "Invalid login or password" I DON't get any message but my Presentation services and RPD gets hung( when I try to open it online)What do the logs say?
Also, I am trying to refresh the GUIDs after making the necessary changes in the config and instanceconfig.xml file i start the obi server and presentation server, it doesn't come up. So I am unable to refresh my GUIDsWhen you say doesn't come up, do you mean the services are down? If yes, what do the logs say about this?

I have no data service after io6? Anyone know a solution?

As in no 3G or edge. Can't send texts.

I have the same problem after upgrading to IO 6 on my iPhone 4S, and I think I figured out a fix!
Go to:
Settings > General > Cellular > Roaming > Data Roaming ON
It looks like after the upgrade it thinks I'm roaming and restricted data over 3G. Not sure if this will impact my phone bill (theoretically it shouldn't, since I'm not in roam), but we'll see.
Hope this helps!

Keyword data lost after Snow Leopard upgrade

I'm using Bridge CS3 and after upgrading to Snow Leopard my keyword data is gone, gone, gone.
Is this happening to anyone else? Any ideas or solutions for recovering it?
Thank you,
Mihaela V.

Yes, I am having the same problems. I have no keywords or metadata showing up anywhere within my files.

No SIM service after iPhone 4 upgrade?? could you suggest me what to do?

I upgraded my phone on itunes ......after which the setup is stuck at insert the approriate sim card........ I quite dint understand how I lost identification of my service sim card after upgrade??.......Can someone help me please?

sounds like your phone was hacked to work with your current SIM card. Upgrading the iOS re-locked it to the original carrier. You won't be able to activate your iPhone without a SIM card from the carrier to which is was originally locked.

IPhone 5: Can't turn on location services after ios 7 upgrade.

When I upgraded to the current ios, location services got turned off. Now there is a password there, and I'd never had one before. I've been trying unsuccessfully for 3 weeks with every number combination that I can think of to get into my restrictions tab and turn on location services.
Any Suggestions?.

Read this
Note: If you lose or forget a restriction passcode, you will need to perform a factory restore to remove it.
http://support.apple.com/kb/HT4213
Message was edited by: ckuan

Newbie question about Logical Data services

Lets say we want to create a Logical Data Service that will retrieve data from several web-services and aggregate the results. When a client requests data from the logical data service, a number of webservices will get invoked. Response time of these webservices can be different. We do not want to keep the client app waiting for long.. so is it possible to define a cut-off time in data service after which client gets results obtained till that point? Alternatively, does ALDSP provide support for clients that could poll a data-service to check for results of a previously submitted query?
Will appreciate your help in understanding capabilities of ALDSP and approach taken by you in similar situations.

to define a cut-off time in data service after which client gets results obtained till that point?See the fn-bea:timeout() function in the ALDSP documentation. It will do exactly what you want for web-services. Note that adding the function to a query will of course alter the query plan - which will have little/no effect for web-services - but for database access, may prevent some optimizations.
In DSP 3.0, you will be able to use the hasNext()/next() form of the mediator api and the client will only block while the first and subsequent items are being retrieved.
If you want to call DSP asynchronously - I believe ALSB allows you to create an asynchronous proxy service (JMS, for instance)

Celullar Data Lost or "No Service" after Upgrade iOS 8.1

Hello all member,
I've been using iPad4 for about 8 months.
This problem happened after I upgrade to iOS 8.0.2, after I upgraded to ios 8.0.2 my phone signal started "no service".
FirstIy, I think there is a problem with my sim card, and then I've replaced with some other sim card. But the problem still not solved.
Second opinion, i tried to Reset >> Network Setting. But the problem still there.
Last option, i tried to Full Reset but still find my celullar is "No Service"
For about 3 weeks, I get notification for iOS 8.1 and I upgraded it last night.
But the problem still exist, my cellular data connection still "No Service".
Is there anyone here who can help me?
Thanks for all advice.

I upgraded ipad mini 2 with LTE from 7.1.2 straight to 8.1.2 hoping all the bugs are ironed out by now.... nope!
Got the free 200MB/mo Tmobile sim and 4G works. LTE network connection seems fine. I get an LTE next to Tmobile on the status bar. But I get a message saying "Could not activate cellular data network. You are not subscribed to a cellular data service." as soon as I try to use a browser.
With AT&T sim, 4G works just like Tmobile, but as soon as I switch on LTE, there is no network connection at all with "No Service" on the status bar and falls back to 4G after a while. So seems like something broke LTE even on 8.1.2.

Why has my ipad lost connectivity to the AT&T cellular data network after upgrading to iOS 8.1.2? My iPad is model #MD367LL/A, 32 GB WIFI + Cellular, about 2-1/2 years old.

Why has my ipad lost connectivity to the AT&T cellular data network after upgrading to iOS 8.1.2? My iPad is model #MD367LL/A, 32 GB WIFI + Cellular, about 2-1/2 years old. It;s been working perfectly up until now. I have no problem on my home WIFI, or through personal hotspot working through my iPhone 5.
I have worked with AT&T, replaced the SIM card with a new one, and done a backup/restore to factory settings, all with the same result that when I turn Cellular
Data on, with or without Enable LTE, it goes into "searching" mode, or reports "no service". My iPhone 5 works perfectly on iOS 8.1.2, on Cellular. I've browsed the blogs and have tried Apple's suggested fix, all to no result.
Oddly enough, every once in a while I do get connected to the network for a short ime (minutes), but it always returns to "searching".
I've filed a report with Apple, along with a request that they contact me, but no results yet.
Help? (and thank you).

Hello razmee209. Thank you for your response. I spent the better part of yesterday working with Apple Support. They tried their best, to include backing up photos to my HP laptop, backing up the iPad to iCloud, then resetting the iPad in total. Same problem. I restored from the cloud to recover my apps, same problem.
AT&T installed a new sim card - same problem. I spent time with AT&T Support yesterday, too. In both cases, (Apple and AT&T) the support techs who worked with me were extremely polite, courteous and helpful to the best of their abilities, but I think the problem lies deeper, and nobody at Apple is admitting they have a problem with iOS 8, that I'm aware of.
I didn't have this issue before I upgraded to iOS 8.1.2.
Everything else with the iPad works fine: WIFI, Personal Hotspot, email, all my apps, etc.
In browsing the web for this issue I see that many other folks have the same problem. I filed a report with Apple this morning, requesting that they contact me, but no word yet. I was going to go to iPhone 6, and had been considering the iPad Air 2, but I see reports of this problem with those units as well.
At this point I don't think I'll be spending any more money with Apple, at least not till this issue is resolved.
Thanks again for your response and suggestions.

My iPad Mini Retina LTE got No Service after upgrade to IOS 8.1

After upgrading to IOS 8.1 my iPad Mini Retina lost GSM signal and No Service indication appears in top left screen.
Tried to reset, switch off without positive results.
With manual carrier search, my carrier is still in the options but no results.
Please help

I upgraded ipad mini 2 with LTE from 7.1.2 straight to 8.1.2 hoping all the bugs are ironed out by now.... nope!
Got the free 200MB/mo Tmobile sim and 4G works. LTE network connection seems fine. I get an LTE next to Tmobile on the status bar. But I get a message saying "Could not activate cellular data network. You are not subscribed to a cellular data service." as soon as I try to use a browser.
With AT&T sim, 4G works just like Tmobile, but as soon as I switch on LTE, there is no network connection at all with "No Service" on the status bar and falls back to 4G after a while. So seems like something broke LTE even on 8.1.2.

Problems with Cellular Data Connection after 6.1.3 upgrade

Have had nothting but problems after installing this upgrade. My iPad 3rd generation 4G (Verizon) is continually searching for data service ever since I installed this upgrade. It has never been able to connect to cellular, but WiFi connectivitity is fine. Even worse, the iPad now shuts itself down and reboots after just a few minutes of use. HELP!!!

Solved by keeping both buttons for 15 s for turning off and mad recovery from backup.

Security requirements to upgrade Master Data Services Database

What is the security requirements to upgrade an MDS database. When I choose Upgrade Database and after running the upgrade scripts I get the following exception:
Microsoft.MasterDataServices.Configuration.ConfigurationException: The user does not have access to the application.

Hi RicardoMarques182,
Did the error happen right after the upgrade was done and was trying the open the Master Data Service(MDS) application? Could you please help to post the full(more detailed) error message?
Just per the general error message, please ensure the currnt login user has the at least Explorer function permission:
http://msdn.microsoft.com/en-us/library/ff487017.aspx
Thanks,
Jinchun Chen

Data Services 4.1 upgrade failed

Hi Everyone,
We came across a very really strange situation when we try to upgrade our DS from 4.0 SP3 to DS 4.1 SP2.
Before the upgrade, our DSConfig.txt file is in the bin folder where DS is installed (E:\SAP BusinessObject\Data Services\bin). After the upgrade, we discovered a second DSConfig.txt file was created and saved to C:\Program Files\SAP BusinessObjects\Data Services\conf folder. How is this possible when during the upgrade we specifically pointed to E:\SAP BusinessObject location? More importantly which DSConfig.txt file should we use? Right now we can't connect to our repositories through the CMC.
TIA

Also, do not worry about the change in the directory. In the release notes it is mentioned that Linked path is changed to common directory path.
Configuration
Old location:
<LINK_DIR>/bin/DSConfig.txt
New Location:
<DS_COMMON_DIR>/conf/DSCon
fig.txt
It is weird why SAP has to change the paths. I think your upgrade went well.
Please check the release notes documents for other changes.
http://help.sap.com/businessobject/product_guides/sboDS41/en/sbo411_ds_whats_new_en.pdf
Good Luck

Lost data connectivity after upgrading iPhone 4 to iOS 5. How to fix?

Hello,
I upgraded my 16GB iPhone 4 yesterday from iOS 4.3.5 to iOS 5 and everything went fine after a few failed connections to Apple's servers, however my phone lost the data connectivity completely. Phone and SMS worked fine, I could also connect through wi-fi with no problems, however whenever I tried to use data I got a message that my phone was not signed to an internet service.
I restored my phone from the backup after upgrading. Not successful. I also reset the network configurations. No deal.
My carrier is Vivo (Brazil) and everything worked fine prior to the upgrade (and after the downgrade).
I imagine it can be a problem with APN configuration under iOS 5 and I tried to configure it through a webpage, but I got a message that my phone already had a APN config (profile) and could not install another. Under Settings>General>Network I don't have the "mobile network option" nor the "profile" option.
Any thoughts? So far I haven't contacted other people under my carrier who upgraded to see if they had the same problem.
Thanks for reading,
Samuel

I got a workaround; it's not what I wanted, but it solves the main problem.
I noticed that I only lost data connectivity after restoring from backup after the iOS 5 update. So what I did was to backup my phone, restore again to iOS 5, configure as a new phone and backup again (with nothing in the phone).
Then I launched an iPhone backup utility software, in this case, iBackupBot, which in the trial version is enough for what I wanted. I opened the old backup and exported only the files I wanted (like call history and SMS history), then I imported these files into the new backup and restored from it.
I lost my media files (which I copied before) and some configurations, but the most important itens, like SMS, I managed to export from the old (complete) backup.
Message was edited by: samuelsam

No data services after 3.1 upgrade

Similar Messages

Maybe you are looking for