No Data Shown because an error occurred while running the query

Discoverer 10gR2 using Plus on Firefox:
I have one workbook. The first sheet summarizes by Vendor. Parameters are Type, Category, Vendor (all optional) and mandatory date range.
The second sheet summarized by Vendor and Model. Parameters are Type, Category, Vendor, Model (all optional) and mandatory date range.
All parameters except the extra "Model" are shared between the sheets.
When I run the Vendor sheet, parameters pop up, I put in dates and leave the rest blank. Results display. Yeah!
When I then run the Model sheet, parameters pop up again (because it has one more parameter). Dates carry forward, leave the rest blank. I get the error No Data Shown because an error occurred while running the query. Refreshing does not help.
If I click back to the Vendor sheet, then come back to the Model sheet, no parameter screen and the query runs.
Booooo.
Have tried multiple DBs, multiple EULs, multiple underlying data sources, replacing the offending parameter with a whole new one, no difference.
Has any body run into this behavior? Is there an answer?
-- Ron Olcott, Business Intelligence Product Manager

What about trying this. On the parameter definition, you have a section on the bottom left of the Parameters window, called "Do you want to allow different parameter values for each worksheet?". When you say in your posting that all but the Model parameter is shared, I assume you mean that you have set this section value to "Allow only one set of paratmeter values for all worksheets". Try setting this to "Allow different parameter values for each worksheet". See if that might make a difference for you. If that works, you may have to leave the option at this, as the lesser of your evils. From my limited experience, the "Allow only one set of parameter mvalues for all worksheets" is a bit flaky in how it works. So I pretty much have gone to always saying to allow different parameter values for each worksheet. Hope this helps a bit. If worse comes to worse, if you have not done so already, log a service request with support and see what they say. Good luck.
John DIckey

Similar Messages

  • Error: You cannot login because an error occurred while retrieving the login URL. (WW

    Situation is this.. was using 8.1.6 EE and Oracle Portal.. was able to get the Oracle Portal page up and after a while the application died.. this happened numerous times. Found in one of these forums that a bug existed (UTL_HTTP) and recommended going to 8.1.7 EE because of a patch. I migrated my 8.1.6 EE to 8.1.7 EE(made sure procedures & packages were valid). I'm able to bring up the Oracle Portal page but when I go to login I get this:
    Error: You cannot login because an error occurred while retrieving the login URL. (WWC-41441)
    Thoughts?

    Hi,
    I ran ssodatan again and got the following error:
    ERROR: Setting Login Server Partner App
    ORA-06508: PL/SQL: could not find program unit being called
    I then found out that the wwsec_sso_enabler_private in the SSO
    schema is invalid and this was causing the above error. I tried
    recompiling the package but got the following error:
    Errors for PACKAGE BODY WWSEC_SSO_ENABLER_PRIVATE:
    LINE/COL ERROR
    151/6 PL/SQL: SQL Statement ignored
    151/13 PLS-00320: the declaration of the type of this
    expression is incomplete or malformed
    151/20 PLS-00336: non-object-table "SECI" illegal in this
    context
    160/4 PL/SQL: SQL Statement ignored
    643/6 PL/SQL: SQL Statement ignored
    643/13 PLS-00320: the declaration of the type of this
    expression is incomplete or malformed
    643/20 PLS-00336: non-object-table "SECI" illegal in this
    context
    LINE/COL ERROR
    651/4 PL/SQL: SQL Statement ignored
    713/4 PL/SQL: SQL Statement ignored
    713/50 PLS-00382: expression is of wrong type
    745/3 PL/SQL: SQL Statement ignored
    746/10 PLS-00389: table, view or alias name "ENBCONFIG" not
    allowed in this context
    The same package in the Portal schema is valid. Will an
    export of this package from a working instance and an import into
    the above instance solve this problem?
    Thanks and Regards,
    Rupesh

  • You cannot login because an error occurred while retrieving the login URL.(WWC-41441)

    Hi,
    I have a Portal install with the following specifications:
    OS - Sun Solaris 2.6
    DB - 8.1.7.0.0
    iAS - 1.0.2.2
    Portal - 3.0.9.0.7
    It was working fine. Then the initjvm.sql that installs the JVM
    in the database was run. This was done as part of the steps
    required for enabling the UTL_SMTP. The script ran without any
    errors but after that Portal Login was failing with the following
    error:
    You cannot login because an error occurred while retrieving the
    login URL. (WWC-41441)
    and there were no Java classes present in the Portal or SSO
    schema. To overcome this error I reloaded the SSOHash classes to
    Portal and SSO schemas and ran ssodatan. The script ran
    successfully and I was able to login to the Portal after that.
    However, if I login as the administrator and try to create or
    edit users from the Administer tab of Portal, the same error
    occurs again:
    You cannot login because an error occurred while retrieving the
    login URL. (WWC-41441)
    I can programmatically add users using the Security APIs.
    The wwsec_enabler_config_info$ table of the Portal schema
    contains one row but the wwsec_enabler_config_info$ table of the
    SSO Schema contains no rows.
    This install of Portal is hosting a number of applications and as
    such running opca again is not an option.
    Any workaround for this?
    Thanks,
    Rupesh

    Hi,
    I ran ssodatan again and got the following error:
    ERROR: Setting Login Server Partner App
    ORA-06508: PL/SQL: could not find program unit being called
    I then found out that the wwsec_sso_enabler_private in the SSO
    schema is invalid and this was causing the above error. I tried
    recompiling the package but got the following error:
    Errors for PACKAGE BODY WWSEC_SSO_ENABLER_PRIVATE:
    LINE/COL ERROR
    151/6 PL/SQL: SQL Statement ignored
    151/13 PLS-00320: the declaration of the type of this
    expression is incomplete or malformed
    151/20 PLS-00336: non-object-table "SECI" illegal in this
    context
    160/4 PL/SQL: SQL Statement ignored
    643/6 PL/SQL: SQL Statement ignored
    643/13 PLS-00320: the declaration of the type of this
    expression is incomplete or malformed
    643/20 PLS-00336: non-object-table "SECI" illegal in this
    context
    LINE/COL ERROR
    651/4 PL/SQL: SQL Statement ignored
    713/4 PL/SQL: SQL Statement ignored
    713/50 PLS-00382: expression is of wrong type
    745/3 PL/SQL: SQL Statement ignored
    746/10 PLS-00389: table, view or alias name "ENBCONFIG" not
    allowed in this context
    The same package in the Portal schema is valid. Will an
    export of this package from a working instance and an import into
    the above instance solve this problem?
    Thanks and Regards,
    Rupesh

  • Error: An error occurred while preparing the query in openquery on ServiceNow ODBC Link Server

    Hi Team,
    Greetings of the Day!!!!!
    I have a created a link server on SQL Server 2008 R2 databse of Service Now ODBC driver. And written a stored procedure using openquery to get the data from link server.
    Now problem is that, when i have scheduled that stored procedure in sql jobs. When this job runs automatically then we are getting below error while when i start the job mannually then it's not giving error.
    An error occurred while preparing the query "..........."
    Please help me to resolve this issue.
    Regards,
    Brijendra Pandey

    Hi Fanny,
    I had reviewed the job history. I am getting below message where as table is exist in the database.
    Message
    Executed as user: NT AUTHORITY\SYSTEM. OLE DB provider "MSDASQL" for linked server "SNOWDSN" returned message "[DataDirect][ODBC OpenAccess SDK driver][OpenAccess SDK SQL Engine]Base table:incident not found.[10129]". [SQLSTATE 01000] (Message 7412)  OLE
    DB provider "MSDASQL" for linked server "SNOWDSN" returned message "[DataDirect][ODBC OpenAccess SDK driver][OpenAccess SDK SQL Engine]Base table:sysapproval_approver not found.[10129]". [SQLSTATE 01000] (Message 7412)  OLE DB provider "MSDASQL" for linked
    server "SNOWDSN" returned message "[DataDirect][ODBC OpenAccess SDK driver][OpenAccess SDK SQL Engine]Base table:problem not found.[10129]". [SQLSTATE 01000] (Message 7412).  The step succeeded.
    Regards,
    Brijendra Pandey

  • Error Message " An error occured while running the detection " Sharepoint 2010 & Project Server 2010

    i am trying to Update the Service Pack of sharepoint & Project
    Server (SP2) . i got an error while running the Package " An error occured while running the detection " ... I searched a bit and ran ROISCAN.vbs script which is by provided by MS to identify any issues ... i Found that few MSI files of sharepoint
    are missing from WINDOWS Installer folder.... My Question is Should i repair the Sharepoint or any tool that i can use to get the MSI ?

    There is a MS internal tool for fixing this issue but for this may be you need to contact MS, refer to below links:
    Utility Name: OPUtil.vbs
    http://social.technet.microsoft.com/Forums/en-US/a7919b10-e4fe-4911-9016-bb6b81cf4194/sharepoint-patch-update-issue
    http://blogs.technet.com/b/paulpaa/archive/2010/03/26/sharepoint-2007-hotfix-failed-with-an-error-the-detection-failed-this-can-be-due-to-a-corrupted-installation.aspx
    Please ensure that you mark a question as Answered once you receive a satisfactory response.

  • An error occurred while running the Inventory agent in InventoryEnforcer

    2007.03.07 15:00:00 [Console:SERVMAN SCHEDULED ITEM] Inventory Agent:
    Found KeyValuePair in INVSETUP.INI, agentRuns = Subscriber
    2007.03.07 15:00:00 [Console:SERVMAN SCHEDULED ITEM] Inventory Agent:
    Found KeyValuePair in INVSETUP.INI, forceDebug = false
    2007.03.07 15:01:12 [Console:SERVMAN SCHEDULED ITEM] Clean the
    Inventory Agent
    2007.03.07 15:01:12 [Console:SERVMAN SCHEDULED ITEM]
    Inventory(InvAgent):Mar 7, 2007 3:01:12 PM: An error occurred while
    running the Inventory agent in
    InventoryEnforcer:EnforcePolicy(Distributed Server Package
    ServerX:General:Server Inventor.Pol.ZEN.BO.ORG)
    2007.03.07 15:01:12 [Console:SERVMAN SCHEDULED ITEM] MESSAGE - Policy
    processed successfully : Distributed Server Package
    ServerX:General:Server Inventor.Pol.ZEN.BO.ORG
    2007.03.07 15:01:12 [Console:SERVMAN SCHEDULED ITEM] Policy has been
    flagged to prevent future scheduling : Distributed Server Package
    ServerX:General:Server Inventor.Pol.ZEN.BO.ORG
    I have reinstalled de ZfS 7SP1 Inventory Agent on the server.
    Did not help.
    Recreated the Distributed Server Package with only Server Inventory
    Policy enabled. And succesfully distributed it to the subscriber.
    Did not help.
    Restarted server, did not help ;-)
    Checked if INVNATVE.NLM, INVAID.NLM and MPKSCAN.NLM are installed. OK
    Inventory Policy is referred to sane Inventory Service object as
    workstation inventory policy
    Inventory Service on root service has Machines Attached option
    enabled.
    Workstation inventory works fine from all our 36 locations.
    Server inventory i am testing from one location.
    We have Netware 6.5 SP5 with ZfD and ZfS 7 SP1 on all our locations.
    Greetings from the Netherlands,
    Michel Woltjer

    Michel,
    It appears that in the past few days you have not received a response to your
    posting. That concerns us, and has triggered this automated reply.
    Has your problem been resolved? If not, you might try one of the following options:
    - Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
    - Check all of the other support tools and options available at
    http://support.novell.com.
    - You could also try posting your message again. Make sure it is posted in the
    correct newsgroup. (http://support.novell.com/forums)
    Be sure to read the forum FAQ about what to expect in the way of responses:
    http://support.novell.com/forums/faq_general.html
    If this is a reply to a duplicate posting, please ignore and accept our apologies
    and rest assured we will issue a stern reprimand to our posting bot.
    Good luck!
    Your Novell Product Support Forums Team
    http://support.novell.com/forums/

  • When trying to sync my iPad I am getting a message stating " iTunes could not connect to the iPad "iPad" because an error occurred while reading the device

    When trying to sync my iPad I am getting a message stating that iTunes could not connect to the iPad "iPad " because an error occurred while reading from the device

    Hi Centreless,
    If you have difficulty with your iPad not being able to connect to iTunes in order to sync, you may want to try the troubleshooting steps in this article -
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    Thanks for using Apple Support Communities.
    Best,
    Brett L

  • Error occurred while running the consolidation of Investment

    Dear Friends,
    when i runn the consolidation package, I got the error message : "RUN_LOGIC:Data for category C_100 not found in application CONSOLIDATION"
    CONSOLIDATION APPLICATION is nothing but my LEGAL application.
    My consolidation logic is:
    *RUN_PROGRAM CONSOLIDATION
    CATEGORY = %C_CATEGORY_SET%
    GROUP = %GROUPS_SET%
    TID_RA = %TIME_SET%
    *ENDRUN_PROGRAM
    What am I missing in the above script?
    Running of Currency Conversion is successfully completed and updation of Ownership is also maintained.
    Thanks in advance
    MD.
    Edited by: Mah2007 on Nov 25, 2011 9:48 AM

    Hi Aidan,
    Thanks for your reply.
    as per note I change the status of Property IS_CONSOL but still is showing the same error.
    Is because of while uploading the data I can use the INPUT schedule and the status of the IS_CONSOL is not updated with "Y"
    Can you please guide the same.
    Thanks MD.

  • Error occured while run the f.27 transaction

    hi ,
    iam running the f.27 tcode, for some document type the error is occured .
    error is " Pt019 error i.e., no archive information found for object type and document type' .
    so can you guys please do this

    Hello,
    The error message says that you have to check your customizing settings
    under the following path:
    SAP NetWeaver -> Application Server -> Basis Services -> ArchiveLink ->
    Print list customizing
    You can find documentation in SAP library also.
    The Batch user must have authorization for S_WFAR_OBJ Actvt: '01' and
    S_WFAR_PRI Actvt: '01'
    Regards,
    David

  • Error occurs while generating the Query

    Hi Experts,
    When I am trying to generate the Query, an error message is displayed as ' Error in generated report (Selection screen is too large) '.
    Query is develoed using Quick list viewer.
    Need ur assistance to overcome the Error.

    hi,
    Try to remove some fields from selection screen as well as output and check.

  • Urgent: You cannot login because an error occurred while retrieving the login URL.

    I got this error when i tried to login to administrator portal
    The error number is wwc-41441
    i can login into portal30 but not into portal30_sso
    please send me a reply as soon as possible

    Hi,
    I ran ssodatan again and got the following error:
    ERROR: Setting Login Server Partner App
    ORA-06508: PL/SQL: could not find program unit being called
    I then found out that the wwsec_sso_enabler_private in the SSO
    schema is invalid and this was causing the above error. I tried
    recompiling the package but got the following error:
    Errors for PACKAGE BODY WWSEC_SSO_ENABLER_PRIVATE:
    LINE/COL ERROR
    151/6 PL/SQL: SQL Statement ignored
    151/13 PLS-00320: the declaration of the type of this
    expression is incomplete or malformed
    151/20 PLS-00336: non-object-table "SECI" illegal in this
    context
    160/4 PL/SQL: SQL Statement ignored
    643/6 PL/SQL: SQL Statement ignored
    643/13 PLS-00320: the declaration of the type of this
    expression is incomplete or malformed
    643/20 PLS-00336: non-object-table "SECI" illegal in this
    context
    LINE/COL ERROR
    651/4 PL/SQL: SQL Statement ignored
    713/4 PL/SQL: SQL Statement ignored
    713/50 PLS-00382: expression is of wrong type
    745/3 PL/SQL: SQL Statement ignored
    746/10 PLS-00389: table, view or alias name "ENBCONFIG" not
    allowed in this context
    The same package in the Portal schema is valid. Will an
    export of this package from a working instance and an import into
    the above instance solve this problem?
    Thanks and Regards,
    Rupesh

  • I get error message iTunes could not sync calendars to iPhone because an error occurred while merging data

    I get error message iTunes could not sync calendars to iPhone because an error occurred while merging data on my wifes phone how do you correct problem without losing calendars info on phone.

    One thing that might help.
    1. open itunes preferences from the edit menu and click on the devices tab.
    2. check the box to disable syncing for iphones connected to itunes and click ok.
    3. Then click the button to reset sync history.
    4. Now click ok to close the preferences window.
    5. connect the iphone to itunes and go to the info tab.
    6. scroll to the bottom of the info page and check the box to replace the ical data on the iphone.
    7. then click apply on the bottom right of itunes.
    This will overwrite any events on the iphone, including any events that has become corrupted.
    Hope this helps

  • TS2634 My problem - when syncing and error messages  comes up:  iTunes could not sync calendars to the iPhone because an error occurred while margin data."  I've tried turning the phone off and back on, & tried both USB ports but get the same thing.  What

    My problem - when syncing and error messages  comes up:  iTunes could not sync calendars to the iPhone because an error occurred while margin data."  I've tried turning the phone off and back on, & tried both USB ports but get the same thing.  What can I do next since it doesn't give me even one clue as to what the error would be?

    Before I started to resync calendars one by one as suggested in the troubleshooting article, I remembered something that came up in a sync when I first attempted :  a 'which one do you want to keep' message about a repeating calendar event, which came up with three options, one from Calendar, and two from iCal on the phone.  I deleted that event, then went through the calendar resync one by one, and all seems OK now.
    In Music there is a way to find 'ghost' items that show up as grayed-out on the menus, so that you can try to reassociate or delete them.  It would be nice to have a similar way to work with Calendar!
    Thanks for pointing me to the right article.

  • Need solution for the following sync error: "iTunes could not sync calendars to the iPad "iPad name" because an error occurred while sending data from the iPad"

    Need solution for the following sync error: "iTunes could not sync calendars to the iPad "iPad name" because an error occurred while sending data from the iPad"

    I want to add that I deleted all the old back-ups and created a new back-up without any issues except sync problem.

  • Message "iTunes could not sync contacts to iPhone because an error occurred while committing data"

    Hello all. I recently replaced the HD in my MacBook Pro. Just after, I retrieved my old files from the Time Machine backup, which I made just before the replacement. During the first sync of my iPhone via iTunes and while I was trying to sync my contacts I saw the message "iTunes could not sync contacts to iPhone because an error occurred while committing data". After that, I lost my iPhone contacts (I have them only from iCloud). The only problem is contacts, all the others (Calendars, Apps) are normally syncing. Does anybody has a solution? Thanks in advance!

    hello,
    There was a similiar posting that I have seen from others and they found out that the back up was bad. https://discussions.apple.com/message/6139533#6139533
    I would use a previous backup (earlier one) to the one you have tried to just do.

Maybe you are looking for

  • IDOC is successfully triggered from SAP ECC

    hi,       IDOC has been Trigerred from ECC Sucssesfully and the status is 03, but it not reached in PI, what will be the error, please do the needful at the earliest. Share some more errors where i can stuck with idoc when doing IDOC to File scenario

  • Applications not in 'Home' folder

    For some reason all of my apps are in the sub-folder, 'Applications'. The main 'App' folder is empty. I don't know how this happened. Is there an easy way to move/copy to main folder? Thanks!

  • Firefox doesn't remember the last used download directory that I saved to when it restarts!

    Even when I have firefox set to ask me where to save files, it's default location is still the folder selected under "download options", instead of the last location I saved to. I suspect that this has something to do with the "download.lastdir" opti

  • Account code strategy

    Can anyone explain the account code strategy (mainly numeric) in chart of accounts of SAP B1 2005?

  • System considers dependant requirements lying outside planning horizon

    Hello Experts, Iam running the MRP for procurement. I have defined a planning horizon so that system will consider the requirements of that period. Iam using NETPL as my planning method in MRP. I wanted to create only purchase requisitions during thi