No data to retrieve. Query 1

Hi All,
I tried to run a query in Infoview and the following following error occured
No data to retrieve. Query 1
any suggestions are welcome. Thanx
Shashi

Thanks Denis,
I will look in to it.
Shashi
Edited by: Shashi02 on Aug 13, 2010 10:52 PM

Similar Messages

No data to retrieve error

Hi ,
I have a Webi document with 4 queries and I merged all of them with org unit dimension.When I am refreshing this Webi document I am getting a message saying that "no data to retrieve <Query name>".
When I created a new document by using same Universe I am able to see data.
can any one let me know why this is happening and the way to resolve this please.
Thanks,
Rakesh

Hi,
When we use multiple queries in our report it just run queries parallely and give us the result.
Please check if you have added some objects from other query by mistake.
Do one thing take only one dimention objetc from the universe which is not giving data and test it with other query.
I think this is how you could find out the reason why its happening.
But i still belive there might be a objetc witch is restricing the data let me know the status.
Cheers,
Ravichandra K

No data to retrieve in Query 1 for particular User

Error: No data to retrieve in Query 1 for particular User
Hello,
We have webi report in 3.1 version which is running fine in Infoview for particular user.
But when same report is send into Inbox of other user and if user try to run it in infoview it is giving below error.
"No data to retrieve in Query 1"
All the security and group member level settings for both the user are exactly same. What could be the reason for this behaviour.
Thanks

Can you please check user is part of which group in enterprise receipts group.
Also please check dynamic receipts tab of publication where data can be filtered
Thanks,
Swapnil

No data to retrieve Query1

Hi,
We have a typical issue, we work on webi report from BI Launch Pad, Our client User created a 2 users to access and design webi reports. 1 User is able to run the query and able to get results of the query and report is running fine. Whereas other user created with same rights as 1st User. But the 2nd user is able to login to Launchpad and Open WEBI, but when running the query the resuly is showing as "No data to retrieve Query1"
Can any one suggest what and where we are missing.
Regards
Kumar

Hi Kumar.
If the user who gets data can log in on the other users computer and run the report there - do they get data?
If you are using BEX, is there any chance the user has personalised a variable in BEx making the selection in valid.
Again if you are using BEx, do they get values if they run the query in Analyser.
With regards
Gill

Unable to access the data from Data Management Gateway: Query timeout expired

Hi,
Since 2-3 days the data refresh is failing on our PowerBI site. I checked below:
1. The gateway is in running status.
2. Data source is also in ready status and test connection worked fine too.
3. Below is the error in System Health -
Failed to refresh the data source. An internal service error has occurred. Retry the operation at a later time. If the problem persists, contact Microsoft support for further assistance.
Error code: 4025
4. Below is the error in Event Viewer.
Unable to access the data from Data Management Gateway: Query timeout expired. Please check 1) whether the data source is available 2) whether the gateway on-premises service is running using Windows Event Logs.
5. This is the correlational id for latest refresh failure
is
f9030dd8-af4c-4225-8674-50ce85a770d0
6.
Refresh History error is –
Errors in the high-level relational engine. The following exception occurred while the managed IDataReader interface was being used: The operation has timed out. Errors in the high-level relational engine. The following exception occurred while the
managed IDataReader interface was being used: Query timeout expired.
Any idea what could have went wrong suddenly, everything was working fine from last 1 month.
Thanks,
Richa

Never mind, figured out there was a lock on SQL table which caused all the problems. Once I released the lock it PowerPivot refresh started working fine.
Thanks.

Can we use session variables in BI publisher's Data Model SQL Query?

Hi Experts,
We need to implement Data level security in BI Publisher 11g.
In OBIEE we do so by using session variables, so just wanted to ask if we can use the same session variables in BI Publisher as well
ie can we include the where clause in the Data Models SQL Query like
Where ORG_ID = @{biServer.variables['NQ_SESSION.INV_ORG']}
Let me know your views on this.
PS: We are implementing EBS r12 security in BI Publisher.
Thanks

Read this -> OBIEE 11g: Error: "[nQSError: 23006] The session variable, NQ_SESSION.LAN_INT, has no value definition." when Creating a SQL Query using the session variable NQ_SESSION.LAN_INT in BI Publisher [ID 1511676.1]
Follow the ER - BUG:13607750 - NEED TO BE ABLE TO SET A SESSION VARIABLE IN OBIEE AND USE IT IN BI PUBLISHER
HTH,
SVS

SAP MII 14.0 SP5 Patch 11 - Error has occurred while processing data stream Dynamic Query role is not assigned to the Data Server

Hello All,
We are using a two tier architecture.
Our Corp server calls the refinery server.
Our CORP MII server uses user id abc_user to connect to the refinery data server.
The user id abc_user has the SAP_xMII_Dynamic_Query role.
The data server also has the checkbox for allow dynamic query enabled.
But we are still getting the following error
Error has occurred while processing data stream
Dynamic Query role is not assigned to the Data Server; Use query template
Once we add the SAP_xMII_Dynamic_Query role to the data server everything works fine. Is this feature by design ?
Thanks,
Kiran

Thanks Anushree !!
I thought that just adding the role to the user and enabling the dynamic query checkbox on the data server should work.
But we even needed to add the role to the data server.
Thanks,
Kiran

No data from BW-Query in BO-tools

Hello all
On a newly installed BO XI 3.1 with the SAP integration kit I cannot get data from my existing BW queries.
For example, if I start Xcelsius and add my BW-system as connection I can get the structure of the query (headings) but no data is displayed, neither in the connection's preview tab nor in the web preview.
The same happens if I create a QaaWS on this BW-query - I see the query headings, but not the actual data.
The query shows data if I open it directly in my web browser and it's a really simple one: no variables, no extras, only a few columns and rows.
I use SAP BW 7.01 SP6, XI 3.1 12.3.3 and XCelsius 2008 5.3.4
In SAP BW my user has SAP_ALL as well as BOE Admin & Content producer roles.
I'm relatively new to BO products so I have no idea where to start looking for the cause. Please help!
BR
Kanan

Hi
After I found the document "Using Xcelsius 2008 with SAP NetWeaver BW" (http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/10ad2489-8956-2d10-f8ab-ed4cce2766da?quicklink=index&overridelayout=true) and followed the steps it works.
It seems as if the error was not in the system but in front of it - a typical case of RTFM, although the manuals are not always easy to find.
sorry & thanks.
BR
Kanan

Key date for a query

Dear All,
I have created a customer exit variable on key date of a query.
With this input variable i am first asking user to input one particular date say he enters 31.12.2010 then i am trying to add 1 more day to it and making it 01.01.2011.
I have put a break point in the code but it does not stop the processing there.. report executes directly taking the first user input.
I want to add 1 more day to the user entered date and this modifiied date should be the input date for key date field.
Below is my code.
WHEN 'ZCAL_DAY_EXT'.
    IF I_STEP = 2. "after the popup
      LOOP AT I_T_VAR_RANGE INTO LOC_VAR_RANGE
      WHERE VNAM = 'ZCAL_DAY_EXT'.
        CLEAR L_S_RANGE.
      ENDLOOP.
      DATA: v_temp like sy-datum.
      v_temp = loc_var_range-low.
      v_temp = v_temp + 1.
      L_S_RANGE-LOW = v_temp.
      L_S_RANGE-SIGN = 'I'.
      L_S_RANGE-OPT = 'EQ'.
      APPEND L_S_RANGE TO E_T_RANGE.
    ENDIF.
Do let me know where am i going wrong? Or is it we cannot use customer exit with Key date.
Thanks & Regards,
Anup
Edited by: Anup Chaudhari on Aug 2, 2011 7:16 AM

Hi Anup,
Basically I_STEP = 1 is used for populating the default value which will be shown on selection screen and I_STEP = 2 is the step in which you does the processing on variable values which are entered on selection screen.
I am surprised that your internal table is empty, actually it is supposed to contain all the variable values which are entered in I_STEP = 1.
Can you try to add some more variables along with the current variable and check whether their value is coming in the internal table or not?
Finally what you can try is get the user input date in one variable and then create another customer exit variable in which you will calculate the new value and use this variable in Key date, the problem might be that we are trying to modify the same variable, actually it should not be the problem but I have no clue what is happening and you can just try this alternative.
Regards,
Durgesh.

The iPod touch 5 battery won't charge, the iPod battery gets hot and doesn't turn on... What is wrong? Can photos and data be retrieved?

The iPod touch 5 battery won't charge, the iPod battery gets hot and doesn't turn on... What is wrong? Can photos and data be retrieved?

- See:
iPod touch: Hardware troubleshooting
- Try another cable. Some 5G iPods were shipped with Lightning cable that were either initially defective or failed after short use.
- Try another charging source
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genius Bar of an Apple store. I suspect a hardware problem due to the hotness. If iTunes can't see the iPod then uor only hope if to contact a data recovery company for getting data off the iPod. If you have an iPod backup you can restore another iPod, iPhone or iPad from the backup to get the data that was in the backup
Apple Retail Store - Genius Bar

Oracle Forms - How can I create a Data Block with query

Dear friends I have a question, I couldn't do this..
I have a sql query, I want to show the datas of the query.. How can I do this. ?
Data Block Wizard wants a table, view or stored procedure, but I have a query, how can I create a data block with my query.. I m waiting your helps..? Please...
Semih

Hi,
You have two options
1. create a view and base the block on the view
2. create a block with a query Data Source Type of 'FROM clause query'
Hope this helps
Neil

"Source not found" Error creating URL Data control with query parameters

Hi,
I have a restful service for which i want to create a URL data control. I am able to create the URL data control successfully when i am not passing any parameters in the Source field. But if i am specifying the parameters in the source field like this Department=##ParamName##, something weird is happening. After giving the param string in the Source field, it asks for default param value to test the url. It tests the url successfully. After that i select XML as the data format in which i am mentioning the xsd like this . "file:///C:/..../something.xsd" . And this is when i am getting the error. "Invalid Connection. The source is not found". I am giving exactly same path for xsd which i gave while creating URL data control without query parameters. Infact i was able to create the URL data control with query parameters successfully till afternoon. after that it started giving me this error all of a sudden. Infact as soon as i was able to create a URL data contol with query parameter successfully, i took a backup of the application before moving further. But even that backup is not working now.
As far as i understand, i dont think there will be any change in xsd if query params are passed to a web service. Please correct me if i am wrong.
Just dont know what could be the issue. Please help
Thanks

Hi,
xsd is used for the URL service to know what the returned data structure is so it can create the ADF DC metadata
Frank

Where to get BW Metadata: owner, creation date, change date of a query / WS

Hello,
I need a report over the existing queries / worksheets and the owner, creation date, change date of a query etc.
You see some of the information when you go over query properties in the query designer. But you see only the information of one (the opened) query. And you have to do this for every query ...
My idea is to go over BW Metadata in the technical content.
Here is the cube BW Metadata 0BWTC_C08
(The InfoCube BW Statistics u2013 Metadata contains metadata from the Metadata Repository.)
Is this the way to do it? Or any other suggestions u2026
Can I get infos about used structures , etc over this way
Thanks Markus

I had to work on an other subject:
But now the source of information is clear:
RSRREPDIR - index of all queries
RSZELTDIR - index of all queries-components
RSRWORKBOOK - Verwendungsnachweis für Berichte in Workbooks
RSRWBINDEX - List of binary large objects (Excel workbooks)
RSRWBINDEXT - Titles of binary objects (Excel workbooks) in InfoCatalog
The tables are to join over
RSRREPDIR.COMPUID = RSZELTDIR.ELTUID
RSZELTDIR.TEXTLG contains the description
RSRWORKBOOK.GENUID = RSRREPDIR.GENUID
RSRWBINDEXT and RSRWBINDEX are connected over WORKBOOKID
I'd like to put the information of all of this tables in a cube and define a query on it.
I have to define new datasource, infosource to get the data in the cube.
Right?
Now i see some existing datasource objects in the technical content.
0TCTQUERID, 0TCTQUERID_TEXT, 0TCTQUERY, 0TCTQUERY_TEXT
I can't open them to look in. But they might be helpfull. Anybody used them?
Markus

Problem with different resultset with same data and same query in Oracle 8.1.7 and 9i

Hello,
I have been using this query in oracle 8.1.7
SELECT
ID,
AREA_NO
FROM MANAGER_AREA MGR
WHERE COMPANY_ID = :id AND
(:value < (SELECT COUNT(ROWID)
FROM MANAGER_WORK MW
WHERE MW.AREA_ID = MGR.ID AND
(MW.END_WORK IS NULL OR MW.END_WORK >= SYSDATE)))
order by AREA_NO;
In the above query I want to see rows from MANAGER_AREA table depending upon date criteria in the table MANAGER_WORK and also upon the parameter :value i.e if I pass a value as 0 I get to see records for which their is atleast 1 record in MANAGER_WORK with the date criteria and if I pass -1 then I get all the records because minimum value that count(*) would give is 0. The resultset was as expected in 8.1.7.
A couple of days back I installed PERSONAL 9i to test for testing the basic functionality of our program with the same data. This query fails and irrespective whether I pass -1 or 0 it returns me same dataset which I would have got in case if I pass 0.
I do not know whether this is a bug that has got introduced in 9i. Can anybody help me with this problem. It would be difficult for me to change the parameter send to this query as the Query is called from many different places.
Thanks in advance
Amol.

I cannot use a Group by and a having statement over here. The problem with 'Group by' and 'having' clause is If I have to make a join between the two tables. When I use join then I get only rows that are linked to each other in the table.
If I use outer join to solve that problem then I have to take in consideration the other date condition. My previous query use to virtually discard the corelated query result by using -1 as the value. This will not happen in the join query.
Amol.

Execution date in a query

Hello all,
Is there any way to use sy-datum or something like that to store execution date of a query?
Thanks in advance
Carmen

Hi Carmen,
could you please clarify what do you want to achieve?
- Do you want to store somewhere when a particular query has been executed?
- Do you want to execute a query with a filter on SY-DATUM?
As a first input, on the global properties on a query, you have the query keydate, which is by default SY-DATUM
hope that helps
Olivier.

No data to retrieve. Query 1

Similar Messages

Maybe you are looking for