No daylight-saving time auto-adjust?

Using a Lumia 800 in the UK and (believe it or not) only just realised that it hasn't auto-corrected for daylight-saving time. Can't see an option for it either - am I just missing a really obvious setting somewhere? Time/date has many place options but no DST - is that correct?
Solved!
Go to Solution.

I think my experience may help.
I have had hours and hours of frustration with syncing my phone with Outlook calendar because of the way the date and time settings are described on my Nokia phone.
My Timezone is GMT+10 regardless of whether my location is currently in Daylight Saving. The automatic Daylight Saving settings on my computer adjust the time setting by plus 1 hour when Daylight Saving starts.
On the phone, however, setting the time works in a totally weird way. To get the right time on calendar events synced from my computer, I have to set up the phone according to the actual GMT time difference on the day I do the settings. Right now I'm in Daylight Saving so I have to put my Timezone as GMT+11. If I was doing the settings in mid-winter I would have to set the Timezone as GMT+10.
I just discovered this solution today! What a relief. My calendar events now appear at the same time on my phone as on the computer!
However, the whole Nokia time setup arrangement is quite incorrect and that explains the extremely long sequence of complaints on these discussion pages - going back to at least 2004.
It's very straightforward. My Timezone is GMT+10: it's GMT+10 in midsummer and it's GMT+10 in midwinter. A Daylight Saving adjustment doesn't ever change anyone's Timezone.
If Nokia used the correct meaning of Timezone, no-one would be having any problems with syncing events from their computer to their phone.
I have contacted Nokia separately about their serious error in misunderstanding the meaning of Timezone.

Similar Messages

  • UC560 Daylight Saving Time

    Hello,
    We have a UC560. Once Daylight Saving Time (DST) was initiated we updated the time in CCA to the correct time - one hour ahead.
    The problem: The messages being sent to our PC's when a caller leaves a voice message is 1 hour ahead of the actual time.
    Please let us know if you may have a solution for this problem.
    Thank you,
    Dawn

    Okay, I ran the update... Two problems here.
    1. Now my calendar events between March 11 and March 31st 2007 are off by an hour (although they show the correct time when you open the event to view it).
    It doesn't work to delete the event and create a new one... It still shows as the wrong time. the only way I found to fix the time problem is to set each event for the incorrect time zone (I'm in Pacific and have to set it to Arizona).
    2. Each "all day event" I scheduled into my calendar show up the day before the actual event date, yet when I open the event they show the correct date. Example - If I scheduled an all day event for April 19th, it appears on my calendar on April 18th. Yet, when I open the event to view the details, it does say "April 19".
    The only way I've found to fix the birthday events to the correct day is to delete each one and re-schedule.
    I find this highly inconvenient and and huge time waster. My business depends on my calendar being accurrate and I don't have time to adjust hundreds of entries.
    If other folks are having this issue, speak up. It would be great if other folks knew they should wait to install this until a fix is issued.
    If it's just me... Well, I guess that *****.
    What now?

  • Exchange Active Sync UTC Daylight Saving Time

    Color me a bit confused. I am attempting to write an IOS client application to communicate with Exchange ActiveSync and display calendar information. But I am seeing some conflicting information in the protocol docs when compared to what I am getting from
    Exchange. Either that or I am somehow misinterpreting one or the other.
    My intent is to save an appointment in my local database in Coordinated Universal Time and then have the UI read in the information and display it as appropriate to the local timezone. In this way an recurring appointment created before daylight saving time
    for Noon will still be at the same time of day in local time as an appointment created during daylight saving time for noon. But they are not.
    My understanding of the documentation is as such:
    In MS-ASCAL pdf section 2.2.2.40 (roughly page 34) it says for Start Time that : ...the value of this element is a dateTime data type as specified in MS-ASDTYPE section 2.3.
    Moving to MS-ASDTYPE section 2.3 (roughly page 7) the dateTime value is specified in the format of ISO-8601 and all dates are given in Coordinated Universal Time (UTC)
    Looking up coordinated universal time I see that UTC does not changed with the seasons as local or civil time does and therefore DOES NOT support daylight saving time. This makes sense, as DST is decidedly local and is ignored by many areas. You cannot know
    from the perspective of UTC whether or not to apply a DST offset without knowing what timezone and area the time represents, therefore no daylight saving time can be supported. Based on this information I should be able to just slap the dates into my database
    as they are and merely have the UI adjust itself to display them properly.
    However, as a tested I began seeing a divergence of an hour between the two appointments in the database before the UI has even read them. To confirm this I created two recurring appointments representing Lunch at 12 noon local time. One that starts on March
    1st 2014 (Standard Time) and one that starts on March 10th 2014 (daylight saving time) in the eastern timezone. This should be March X 2014 at 1700 hours in both cases should it not?
    In the WBXML/XML that I am receiving I am getting two different times. The appointment that starts during standard time gives me a start time of 20140301T170000Z. The appointment that starts after daylight saving time is in effect locally gives me 20140301T160000Z.
    The difference between the two times is 1 hour, which is the daylight saving time offset. It is my perception based on everything that I have read both in the microsoft protocol documentation and outside it that these two times should be the same and that whatever
    client that gets to display them should be the one putting the offset in place as needed. Noon local time is noon local time but local time is the province of the local municipality/timezone, not that of UTC.
    So my question is what exactly is going on here? Are the start/stop/date stamp date times in UTC or not. If they are in UTC, then why are they offset by an hour instead of being at the same time? Obviously outlook displays these correctly for local time,
    because both appear at noon. But in my case my database contains locally adjusted times instead of the UTC times I thought I was getting which is throwing off when those appointments appear in the UI.
    Can someone please clarify what's going on here and what I should be seeing?
    Thanks.
    E

    Thanks for the reply, however after doing what is said the problem still remains. I did not try the manual approach, because of the time that would take with calendars that change at least daily.
    I am running the latest update of ICal and IPod, you would think this would have been addressed with one of the updates to allow the sync to work correctly with 5th generation IPods.
    I am going to try and turn off day light savings time set the clock to a Central Time zone and see if that works, I do not cross time zones much, anymore.
    MacBook   Mac OS X (10.4.9)  

  • Gmt vs. labview daylight saving time XL

    I am manipulating XL sheets with time& dates. Everything works fine except that all XL times are in GMT (number of fractional days since 1900). No problem to jump to Mac 1904 reference, but a problem to get rid of the daylight saving time offset without changing my Windows setting. Is there a way to get dates and times in string readable format from my GMT number from the time of EXCEL? In other words, can I get the offset somewhere from windows to adjust the number of seconds since 1904 to eliminate this daylight offset? Not the offset of the current time, but well the offset of the past instant from my XL sheets.
    I could do that via XL and activeX, but I suspect someone has a vi to do the trick.
    I guess the time jumps for daylig
    ht saving times lies somewhare in Windows.
    Gérard

    It looks to me like the "is DST" output of Seconds to Date/Time always works on today's date, not a date/time record you pass to it. So, you can use it to tell if Daylight Savings Time is active now, but you can't use it to check if DST was active at a particular date and time, without changing the system time clock in the PC.
    See the attached LV 6.1 VI.
    Attachments:
    Is_DST.vi ‏33 KB

  • Cisco ISE 1.2 Daylight Saving time

    Does ISE support DST change?

    Time Zone = UTC is best practice for a distributed deployment.  Also, remember that if you change the time zone on an ISE, the database is deleted!  So, set this during initial setup.  BTW, for the Eastern Time Zone in the United States, use EST5EDT in order to allow for Daylight Saving Time.

  • Conversion mapping is losing time zone data during daylight saving time

    We have a problem with conversion of Calendars to timestamp with timezone for the last hour of Daylight Saving Time (e.g. 01:00 EDT - 01:59 EDT) where it is being interpreted as Standard Time which is in reality 60 minutes later.
    We've written a JUnit test case that runs directly against TopLink to avoid any issues with WAS and its connection pooling.
    The Calendar theDateTime comes from an object called TimeEntry which is mapped to a TIMESTAMP WITH TIMEZONE field using conversion mapping with Data Type TIMESTAMPTZ (oracle.sql) and Attribute Type Calendar (java.util).
    We are using:
    Oracle TopLink - 10g Release 3 (10.1.3.0.0) (Build Patch for Bugs 5145690 and 5156075)
    Oracle9i Enterprise Edition Release 9.2.0.7.0 - 64bit Production
    Oracle JDBC driver Version: 10.2.0.1.0
    platform=>Oracle9Platform
    Execute this Java:
    SimpleDateFormat format = new SimpleDateFormat("MM/dd/yyyy HH:mm z");
    TimeZone tzEasternRegion = TimeZone.getTimeZone("US/Eastern");
    Calendar theDateTime = Calendar.getInstance(tzEasternRegion);
    theDateTime.setTime(format.parse("10/29/2006 01:00 EDT"));
    Persist to the database and execute this SQL:
    SELECT the_date_time, EXTRACT(TIMEZONE_REGION FROM the_date_time), EXTRACT(TIMEZONE_ABBR FROM the_date_time), EXTRACT(TIMEZONE_HOUR FROM the_date_time)
    FROM time_table WHERE time_table_id=1
    This provides the following results:
    THE_DATE_TIME EXTRACT(TIMEZONE_REGION FROM the_date_time) EXTRACT(TIMEZONE_ABBR FROM the_date_time) EXTRACT(TIMEZONE_HOUR FROM the_date_time)
    29-OCT-06 01.00.00.000000 AM US/EASTERN US/Eastern EST -5
    The wrong time zone is in the database. It should be EDT -4. Let's test the SQL that should be generated by TopLink. It should look like the following.
    Execute this SQL:
    UPDATE time_table SET the_date_time = TO_TIMESTAMP_TZ('10/29/2006 01:00 US/Eastern','mm/dd/yyyy HH24:MI TZR') WHERE (time_table_id=1)
    SELECT the_date_time, EXTRACT(TIMEZONE_REGION FROM the_date_time), EXTRACT(TIMEZONE_ABBR FROM the_date_time), EXTRACT(TIMEZONE_HOUR FROM the_date_time)
    FROM time_table WHERE time_table_id=1
    This provides the same results:
    THE_DATE_TIME EXTRACT(TIMEZONE_REGION FROM the_date_time) EXTRACT(TIMEZONE_ABBR FROM the_date_time) EXTRACT(TIMEZONE_HOUR FROM the_date_time)
    29-OCT-06 01.00.00.000000 AM US/EASTERN US/Eastern EST -5
    Now, execute this SQL:
    UPDATE time_table SET the_date_time = TO_TIMESTAMP_TZ('10/29/2006 01:00 EDT US/Eastern','mm/dd/yyyy HH24:MI TZD TZR') WHERE (time_table_id=1)
    SELECT the_date_time, EXTRACT(TIMEZONE_REGION FROM the_date_time), EXTRACT(TIMEZONE_ABBR FROM the_date_time), EXTRACT(TIMEZONE_HOUR FROM the_date_time)
    FROM time_table WHERE time_table_id=1
    This provides better results:
    THE_DATE_TIME EXTRACT(TIMEZONE_REGION FROM the_date_time) EXTRACT(TIMEZONE_ABBR FROM the_date_time) EXTRACT(TIMEZONE_HOUR FROM the_date_time)
    29-OCT-06 01.00.00.000000 AM US/EASTERN US/Eastern EDT -4
    The correct time zone is now in the database. Let's test reading this with the following Java:
    System.out.println("cal= " + theDateTime);
    System.out.println("date= " + theDateTime.getTime());
    System.out.println("millis= " + theDateTime.getTimeInMillis());
    System.out.println("zone= " + theDateTime.getTimeZone());
    This provides the following results:
    cal= java.util.GregorianCalendar[...]
    date= Sun Oct 29 01:00:00 EST 2006
    millis= 1162101600000
    zone= sun.util.calendar.ZoneInfo[id="US/Eastern",...]
    The TimeZone object is correct since we are using the US/Eastern regional time zone, but the millis are wrong which makes the time EST instead of EDT. The millis should be 1162098000000.
    The conversion from java.util.Calendar to TIMESTAMPTZ loses the actual offset when setting to a regional time zone. It can maintain this info by specifying it explicitly.
    The conversion from TIMSTAMPTZ to java.util.Calendar also loses the actual offset even if the correct offset is in the database.
    Has anyone else encountered this conversion problem? It appears to be a conversion problem in both directions. I know that the Calendar is lenient by default and will assume Standard Time if time is entered during the repeated 1 o'clock hour at the end of Daylight Saving Time, but the Calendars we are using are explicit in their time, so this would be classified as data corruption.
    Nik

    Opened an SR. Looks like there is a problem with conversion either in TopLink or in JDBC.

  • Daylight Saving Time Patch in 10.2.0.4

    Question:
    When you apply the 10.2.0.4 patch (linux-64 bit), does this patch include the daylight saving time patch that needed to be applied in earlier releases?

    I know that. I was looking for the readme file but my metalink account did not have access to it. I was hoping that the forum would fill in the gap for me.
    In this situation, I should have installed the 10.2.0.1 database, then the DST patch and then the 10.2.0.4. Instead, I got ahead of myself and did the 10.2.0.4 patch first. I was just wondering if the DST patch was included in the 10.2.0.4 by now. The good news is that I had my metalink updatred so I have access to the readme file now. I'm glad you knew the answer. Oh wait, you don't.

  • What is the best way to switch off Daylight Saving Time?

    What is the best way to switch off Daylight Saving Time for a DST enabled timezone?

    I've been looking through the related classes and can't seem to find a way to disable DST in any timezone. Probably because they couldn't think of a good reason to want to know what the non-DST time was during DST.
    However, you could easily compute the time without DST if that's what you need.

  • Brazil Daylight Saving Time Problem

    In Brazil, we enter the summer time and my blackberry 9800 torch automatically work, but when I synchronized with the playbook, some problems arose.
    The time in the menu setting is correct, as you can see in this image:
    But the wrong time remains the main screen:
    Does anyone have the same problem and knows how to fix it?
    tks,

    It did not work.
    It is indifferent to select manual or automatic, the problem persists.
    I'm in Brazil and with the correct time zone, but we are on daylight saving time.
    On the menu setting time and date, the time is right, however, in early 1 hour on application clock and and late 1 hour on the main screen.

  • Daylight saving time causes a date error on 01/APR

    morning dears,
    we are facing an issue related to Daylight saving time, as the following:
    at any page on the system that contains a calendar if we choose the date 01/04/2012 it generate an error...
    example on this error :
    on Leave Request page --> when choosing 01/04/2012 then clicking on calculate duration-->
    01/04/2012 is not a valid date. Please re-enter.
    any suggestions??

    dears any suggestions to solve the issue??
    have anyone faced this before?

  • Daylight Saving Time Changes in 2007 for USA

    Can anyone give me solution how to handle Daylight saving Time changes in 2007 in USA for JDK 1.3.x releases? We are using this due to some vendor dependency. We can�t upgrade to higher versions up to middle of the 2007. I would be thankful if somebody gets back to me.

    I have a similar issue where we cannot upgrade the jdk 1.1 without involving a lot of effort. If we keep the same old jdk, can someone tell me if use of Date and Calendar api will be impacted by the Daylight saving change.....provided the timezone is default and not explicitly set to EST. Also there isnt any timezone related buss logic.

  • Does BOXI 3.1 supports Daylight Saving Time (DST)?

    Hi ,
    Can any one tell me whether BOXI 3.1 supports Day Light Saving (DST), in case of scheduling reports?
    Thanks in Advance,
    Raghuveer.

    Hi Reddy,
    you can contact your vendor regarding this information ....
    You need to appy the Business Objects patch, you will need to apply the extended Daylight Saving Time (EDST) patches for your operating system and Java Virtual Machine and Application Servers in order for the Business Objects patches to take effect. Please contact your vendors for updated information.
    Regards
    KP

  • Appliaction Server 9.2 Daylight Saving Time Patch

    We have an older Oracle Application Server 9.2. Do I need to apply Daylight Saving Time Patch.
    Thanks in advance!
    Robert

    Support Note 417277.1 '2007 Daylight Saving Time Updates For Oracle Application Server'

  • CreateODBCDateTime monkeys with Daylight Saving Time!!

    If one uses CreateODBCDateTime to convert a date into the
    proper format for storing in a SQL Server database, and one runs
    this operation on a date between 0200 and 0300 on the day that
    Daylight Saving Time changes, the function will change the time
    forward or backward one hour. IT WILL DO THIS EVEN IF THE DATE YOU
    ARE STORING IS UTC, thus rendering UTC times INVALID because they
    do not have DST. Why does this function monkey with DST at all?

    I have several international web sites on this server, one of
    which has over 100,000 users who have contributed over 70 million
    records, all with UTC timestamps. The problem occurs during the one
    hour period EVERY YEAR when daylight saving time is started. It
    does not do this in the fall when the time reverts. So, yes, the
    problem only occurs during 1 hour out of 8,760 hours, but when you
    start with 70 million records over 5 or 6 years...
    But the danger is for anybody who stores or manipulates a
    date/time OTHER THAN the date/time that is being used internally to
    the server. In other words, if your server is set to Central Time,
    and you have users in Hawaii or Arizona who need to store their own
    date/time, it is likely to apply Central Timezone RULES to that
    date/time, even if Hawaii and Arizona don't use DST.
    Let's say you're scheduling operating rooms in a hospital in
    Honolulu. All the CF routines are going to make sure to shift those
    times forward an hour without warning, have a nice day. In my case,
    it is happening with UTC, but it could be ANY time zone that has
    different rules than the ones on your server.
    Yes, I can probably figure out a different way to process
    times, but this is a massive system with thousands of different
    templates. In fact it affects several pretty massive software
    systems with millions of lines of code, so it's not as if I can
    just change a few SQL queries and be done with it.
    It probably should be a rule for anybody operating a
    ColdFusion server in an international setting, where dates and
    times from different regions might need to be stored in a database,
    to set up the server on UTC time just to avoid this problem.
    Me, I have to
    a. find all the places this will affect in thousands of lines
    of code,
    b. try to decide what impact going to UTC on the server will
    have on things like scheduled tasks, email servers, etc,
    c. then figure out whether there is any way to repair tens of
    thousands of corrupted records

  • Java 1.4 and Daylight Saving Time 2007

    The current version of Java 1.4.2 for Tiger, 'Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2_09-244)' does not handle the new 2007 Daylight Saving Time rules correctly. Will Apple be updating Java 1.4.2 to the version that does support 2007 DST correctly? (at least 1.4.2_11 is required per Sun, http://java.sun.com/developer/technicalArticles/Intl/USDST/).
    If so, when? Thanks!

    Since you didn't list your computer, here's a link to Java 5.0 release 4 for both PPC and Intel-based Macs, which came out in April: http://search.info.apple.com/?q=J2SE50Release4.dmg&type=kbdload&search=Search&lr =lang_en&search=Go. That should solve your problem.

Maybe you are looking for

  • I have more than one apple id and need to coordinate them

    I have more than one Apple ID and cant coordinate them over my devices

  • Cfmap inside table based layout

    I'm noticing that the table attributtes set within a table are dropped from any data cells after a cfmap tag is placed in the table. In a simple example with cellpadding you will see that it works in the data cells before the cfmap tag but not after.

  • Binary Search Using String

    I'm trying to perform a binary search on CDs stored in an arraylist but it will only work with the titles with no spaces (Such as Summertime & Heartless but not Dance Wiv Me). Is this a bug or will it simply not work with strings with a space in them

  • Best setup for external hard drive and iMac?

    Just purchased a Seagate FreeAgent GoFlex 1TB external HD for my Mac OSX 10.5.8. Would like to use it to backup all my pics/writing (I am a writer/photog), videos, and music - about 400 gigs worth at present. As an analog person, I am confused as to

  • 2 decimal places Quantity field in Sales Order

    Hi expert sales orders qty  has two decimal points, which is not supposed to be the unit of measure is EA, and I have checked tcode CUNI its zero decimal places can anybody please help. Thanks in anticipation of your response.