No DC allowed to create in NWDI-SC

Hello,
I am following NWDI based development. I have created a product and software component in SLD. Then I created a Track using that SC which I have already created in SLD. But When I connect to that Track in NWDS and try to create a any DC but all DC types are disabled.
It shows me an error message:
Software Component does not support this Development Component Type. Required DCs are located in an SC that is not visible from the selected SC.
If I change to Webdynpro prespective and try to create a DC then it shows me this error:
The Software Component does not support the selected Development Component type. At least one required DC is not visible.
does any one has the idea??
Regards,
Naeem

Hello Gurmat and Alexander,
@Gurmat: I am in Devleopment Infrastructure and trying to create a webdynpro project which is disabled. As Alexander said in his last message some dependent SC are missing in my software component in the SLD.
@Alexander: I have checked the dependednt software components in local working area. These component I have also set in SLD under dependencies of my created SC. But
Can any one tell me what is the difference between two collumn in SLD Dependencies of Software component.
Prerequisite Software Component Version
Dependent Sofwware Component Version
FYI: when I call some dependent SC then these come in first collumn (Prerequisite Software Component Version). Even though, I try to provide all dependent SC but still I can't create any DC.
Can any one of you tell me what for SC are required in order to create a webdynpro project using NWDI. I will provide only those SC and try it. If it works then I will attach other SC as dependent.
Secondly, I have also seen in CMS (NWDI) under Track Data, we can also provide some dependent SC. Where should I do this dependency???
Regards,
Naeem
Edited by: Naeem Khan on Sep 29, 2009 11:00 AM

Similar Messages

Cancelled invoices are also allowing to create Return order

Cancelled invoices are also allowing to create Return order with invoice references, how to restrict that so Cancelled invoice should not allow to create
Return order with reference.
Please help.
If it is possible in standard how?

Dear Gautam,
I am also facing the similar problem and looking for a suitable solution. In case you if you could implement some solution to prevent creating return sales order with reference to cancelled invoice , then please update me too.
Thanks & Regards,
Pawan Patel

Allow to create a purchase order with purchase requisiton item deleted

Dear all,
I have a question about creation purchase order process.
Firstly, I have a purchase requisition with 2 items, first of them is deleted.
If I try to create a purchase order thru transaction ME57N with the previous purchase requisition, I can only create it with one item (the one wich is not deleted)
However, if I try to create the purchase order thru transaction ME21N, with purchase requisition as reference, I can create the PO with item that was deleted in PR.
I don't understand why system allows to create a purchase order with an item that previously was deleted in PR.
Does anyone have a explanation about this issue?
Many thanks in advance
Best Regards.

Hi,
In the document overview of ME21N you get all the items of the purchase
requisitions, no matter if they are deleted or not.
When you convert the deleted item into a Purchase Order you get message
06 050 stating that this item is deleted in the purchase requisition.
This message can be defined as an error message in the customizing
transaction OME0. This way, it will not be possible to order an item
which is deleted in the referenced purchase requisition.
BR
Nadia Orlandi

I bought a new iMac. iWeb and all folders migrated over, no problem, but I cannot bring up my website - it only seems to allow for creating a new site.

I bought a new iMac. iWeb and all its folders migrated over, no problem, but I cannot bring up my website - it only seems to allow for creating a new site.

You need the 'Domain' file in which iWeb keeps its data. This lives by default in (user)/Library/Application Support/iWeb. You need to locate it on the old machine and copy it to the same position in the new machine. Note that it is the Library folder in your Home folder, not the one at root level.
This folder is hidden on Lion and above; to access it, in the Finder go to the ‘Go’ menu and hold down the Option (Alt) key; the Library folder will appear as a choice. In Mavericks you can make it permanently visible - open your Home Folder the from the Finder's View menu, choose show View Options and check Show User Library.

During PO creation system should not allow to create more than contract val

Hi,
System is allowing to create the PO more than the contract value so I want to stop it please explain the required config settings.
always system should allow to create the PO with in the contract value only.
thanks.

Hi,
GOto IMG>MM>Purchasing>Environ Data>define attrib of system messages
change Msg.No:042 in Appl Area:06 & Version:00.. to Error Message...
This will solve your problem
Edited by: Antony anburaj on May 5, 2010 9:41 AM

Procurement Key 'F' - System will allow to create production order

Dear All,
Pls help solve below issue
Sub-assembly (HALB) material type with Procurement Key is 'F' - but System will allow to create production order, our management don't want to allow this. how to activate the error messges
I checked the system messages CO 046, 047, 048 - it will not help for these messages
Any way to control this (except user exit, badi)
Regards,
Sankaran

Hi Sankaran,
What I infer from your statement is that user is able to convert planned order into Production Order (MD04 or CO040). You want to issue a warning message during this converion.
You can configure warning messages through OPJB.
Whether this material with procurement type F was setup initially with a different setup? Please check whether any routing details exist for this material and also check whether there is any special procurement indicator. One more check is with your MRP Group settings.
Hope this helps.
With Best Regards,
Srinivas

CRS-2630: Only cluster administrators are allowed to create local resources

I have installed and configured a 12c database across two linux nodes and all is well. I have also installed the Oracle rdbms 12.1.01 on the same nodes. Now when I try and use netca or dbca to create a database or listener, I get the following errors;
CRS-2630: Only cluster administrators are allowed to create local resources
I can log in as the GRID user and can create resources but not as database user. Both users are members of the dba group.
Any ideas anyone? Thanks a lot H.

The issue is resolved, the 12c configuration is a lot more comprehensive than 11g. Here we have to create the user DBA with the right rights to access and change the cluster resources.
For example to allow the dba users the ability to create listeners on the RAC nodes, we have to issue some command such as follows; here the oedsdp is the dba user and ogridp is the grid main owner.
t@rac2node ~]# /oracle/grid/bin/crsctl setperm resource ora.rac1node.vip -u user:oedsdp:rwx
[root@rac2node ~]# /oracle/grid/bin/crsctl setperm resource ora.net1.network -u user:oedsdp:rwx
[root@rac2node ~]# /oracle/grid/bin/crsctl setperm resource ora.net1.network -u user:oedsdp:rwx
[root@rac2node ~]# /oracle/grid/bin/crsctl setperm resource ora.rac2node.vip -u user:oedsdp:rwx
[root@rac2node ~]# /oracle/grid/bin/crsctl setperm resource ora.net1.network -u user:oedsdp:rwx
Interesting, I think we need to carefully plan the new user groups before we start the GRID configuration.
H.

Not allow to create delivery note if not enough stock

Hi
is it possilbe not allow to create delivery note if not enough stock? how can i do it
thanks

In case of partial delivery, it allows creation of delivery and PGI only for the quantity of the material which is available in unrestricted stock.
If it is complete delivery and if the stock is not available, it tells you the log saying that only X quantities of delivery is possible and it will ask you to enter the quantity you want to deliver. But as ur sales doc is marked for complete delivery, delivery wont be possible for this.
In nutshell, if you want to deliver the quantity which is more than the available quantity in stock, delivery creation wont be possible.(Tested and confirmed)
Rwd if this helps
Message was edited by:
Navaneetha Krishnan

ExceptionMessage: 'Access denied. Only machine administrators are allowed to create administration service job definitions of type: Microsoft.TeamFoundation.SharePoint.WebAccess.ApplyWebConfigModificationsJobDefinition

Hi,
I am getting error "Access Denied" when my code tries to get "SPWebService.JobDefinition" with an AppPool account of content site. The same core runs correctly for the AppPool of CentralAdmin site.
Lemme provide some background of the servers
- We have multi-server FARM
- WFE and APP servers are in different domains, there is one-way trust between the domains.
- We have UAC (User Access Control) set as high on each server
- My site is internet site
Lines of Code are following
SPWebServiceservice =
SPWebService.ContentService
varsyncTimerJob =
fromSPJobDefinitionjob
inservice.JobDefinitions
                   wherejob.Name
== "MyJob"
selectjob;
I am running the above code with in SPSecurity.RunWithElevatedPrivileges so the above code is running with APP POOL account. I m getting
the error in the 2nd line where I have a LINQ query. And I m assuming this is because of "service.JobDefinition" line. Can anyone help me?
Detailed Error:
An exception has occurred.   ExceptionType: 'TargetInvocationException'   ExceptionMessage: 'Exception has been thrown by the target of an invocation.'   StackTrace: '
at System.RuntimeMethodHandle.InvokeMethod(Object target, Object[] arguments, Signature sig, Boolean constructor)
at System.Reflection.RuntimeConstructorInfo.Invoke(BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture)
at Microsoft.SharePoint.Administration.SPAutoSerializingObject.GetInstanceFromType(Type type, String typename)
at Microsoft.SharePoint.Administration.SPPersistedObject.GetInstance(XmlNode xml, Guid classId, Boolean bResolveMissingTypes)
at Microsoft.SharePoint.Administration.SPFileSystemCache.FetchObjectFromFileSystem(Guid id)
at Microsoft.SharePoint.Administration.SPFileSystemCache.GetValue(Guid id)
at Microsoft.SharePoint.Administration.SPCache`2.get_Item(K key)
at Microsoft.SharePoint.Administration.SPConfigurationDatabase.GetObject(Guid id, Boolean checkInMemoryCache, Boolean checkFileSystemCache)
at Microsoft.SharePoint.Administration.SPConfigurationDatabase.GetObject(Guid id)
at Microsoft.SharePoint.Administration.SPConfigurationDatabase.Microsoft.SharePoint.Administration.ISPPersistedStoreProvider.GetObject(Guid id)
at Microsoft.SharePoint.Administration.SPPersistedObjectCollection`1.get_Item(Guid objId)
at Microsoft.SharePoint.Administration.SPPersistedObjectCollection`1.<GetEnumeratorImpl>d__0.MoveNext()
at System.Linq.Enumerable.WhereEnumerableIterator`1.MoveNext()
at System.Linq.Enumerable.Count[TSource](IEnumerable`1 source)
at Project1.SharePoint.Common.UtilityHelper.IsSyncSchedulingDisabled(StringBuilder logMessage)'   Source: 'mscorlib'   TargetSite: 'System.Object InvokeMethod(System.Object, System.Object[], System.Signature, Boolean)'   ------------------------------------------------------------
Inner exception:   ------------------------------------------------------------    ExceptionType: 'SecurityException'    ExceptionMessage: 'Access denied. Only machine administrators are allowed to create administration
service job definitions of type: Microsoft.TeamFoundation.SharePoint.WebAccess.ApplyWebConfigModificationsJobDefinition, Microsoft.TeamFoundation.SharePoint.WebAccess, Version=11.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a.'    StackTrace:
at Microsoft.SharePoint.Administration.SPAdministrationServiceJobDefinition..ctor(String name, SPService service, SPServer server, SPJobLockType lockType)
at Microsoft.TeamFoundation.SharePoint.WebAccess.ApplyWebConfigModificationsJobDefinition..ctor()'    Source: 'Microsoft.SharePoint'    TargetSite: 'Void .ctor(System.String, Microsoft.SharePoint.Administration.SPService, Microsoft.SharePoint.Administration.SPServer,
Microsoft.SharePoint.Administration.SPJobLockType)'
Any help will be appreciated.

The bottom of your stack trace begs to differ:
at Microsoft.TeamFoundation.SharePoint.WebAccess.ApplyWebConfigModificationsJobDefinition..ctor()'
Source: 'Microsoft.SharePoint'    TargetSite: 'Void .ctor(System.String, Microsoft.SharePoint.Administration.SPService, Microsoft.SharePoint.Administration.SPServer, Microsoft.SharePoint.Administration.SPJobLockType)'
Scott Brickey
MCTS, MCPD, MCITP
www.sbrickey.com
Strategic Data Systems - for all your SharePoint needs

Trying to post a question and receiving: You are not allowed to create or update this content

I am a newbie and am trying to post a question to the support communities and received this reply:"You are not allowed to create or update this content"
My question:
Help! Not all my incoming mail messages are going to my home computer account. Some are derailed and end up in my inbox on my iphone only. My husband is waiting for a message to come through on the home computer and sometimes they end up on my iphone5 accounts. Yikes! He is not happy. Some messages come to my pc email and some only to my phone. But then, some come to both as they should. I need all mail to arrive at both home and on my iphone. I would so appreciate any help or advice given. Thank you! Iphone 5c IOS 7.1.2

I'm not sure, but you might try this (instructions are from my 5s running iOS 7.1.2):
On your iPhone, go to Settings -> Mail, Contacts, Calendars
Find the account you're having the problem with
Touch the arrow to the right of it, which will bring up a screen that has the account name, Mail and Notes
Touch the account name. This brings up a settings screen for only that account.
Go down to Advanced and touch that
See what it says under Deleted Messages. If Remove is set to something really short, your iPhone might be deleting the messages before they have a chance to download onto another device.

ECC allow to create order from fully referenced Quate/Cont with Warning mes

Hi,
Problem- System shall allow to create as many sales order from the fully referenced quatation or contract with " WARNING MESSAGE".
i.e Let say I have a quatation of 100 Q. in ECC.
I want to create 15 sales order of 10 quantity each with the reference of above mentioned quatation of 100 Quantity. But the moment i reached to reference target quantity (100) is committed then system shall still allow me to create sales order but with Warning message. Warning message could be like "Taget quantity is already committed" from the quatation #. But system should not stop me to create more sales order from that quatation of 100 quantity.
Looking forward your valuable inputs in this context. Appreciate your effort and time

Hi,
This is a standard functionality in SAP.
Go to your Quotation to Sales order copy control IMG setting. Tx: VTAA
There select your relevant Copy control, go in to Item Level with the relevant Item Category.
Check whether you have maintained below settings.
Pos./neg. quantity = +
Update document flow = X
Check the "Completion Rule" specified in the item Category IMG Setting as well.
Then system will through a message, once your quotation quantity is reached.
Best regards,
Anupa

Allow to create, only two objects for a class

Hi,
This question is asked in my interview. In singleton concept only one object is created, likewise only two objects are created for a class.
For that i have write a code like this,
public class OnlyTwoObjects {
     private static OnlyTwoObjects a1;
     private static OnlyTwoObjects a2;
     public static int n = 0;
     public static OnlyTwoObjects getInstance() {
          if (a1 == null) {
               a1 = new OnlyTwoObjects();
               return a1;
          } else if (a2 == null) {
               a2 = new OnlyTwoObjects();
               return a2;
          } else if (n == 1) {
               return a1;
          } else if (n == 2) {
               return a2;
          return null;
} But they told this is not good way to do this.
I don't know how to do this, if any body knows kindly let me know.

vijay wrote:
But i will explain my code, in that code we are allowed to create only two objects, Maximum. Understood.
suppose both objects are created, then i will ask which object you need first or second, this is decided using the variable n if it is 1 then it will return the first object and it is 2 it will return the second object. sorry i didn't explain this in my previous post.This is your approach. Is this the requirement as well? Is it necessary that the user decide on which instance (first or second) is returned?Even if it was the requirement that the user decides which instance (first or second) is returned, with the original proposed implementation, the user only gets to decide which instance after calling getInstance() twice. If he calls getInstance() with n=2 when a1 is still null, he still gets a1. If he calls getInstance with n=1 when a2 is still null but a1 is non-null, then he gets a2. As is, he always gets a1 on the first call, a2 on the second call, and after that gets null unless he has set n to 1 or 2. (This explanation ignores any multi-threading issues that may come into play. This explanation is for a single thread.)

Creating of Patient - Dump - Not allow to create the Patient

Hello
For the Generic Search while creating the Patient -
Dump is creating ISH_BAPI_FILL_RETURN_PARAM_NOT FOUND...
Is it the Patches Updated issue?
Or the configuration Issue please?
we are still not able to finding out the reasons - why it causes the system dump?
Not allowing to create the Patient
Edited by: Raja Ram sunku on Jun 6, 2011 8:02 PM

Hi Raja,
Please provide the BAPI details and possibly your code to the BAPI.
Thanks and Best Regards,
Dinesh.

BOM editing should not be allowed while creating P.O./ Scheduling agreement

BOM editing should not be allowed while creating P.O. / Scheduling agreement

Hi,
I think that when you create a subcontracting PO it READS the valid BOM, so there's no locking. From a business point of view you need to question such a requirement, since in SAP you can have many kinds and types of BOMs. Then what if one of the BOMs is open in change mode (edited) exactly when you try to create the order? It should not allow you to create the order? Why?
Regards,
Mario

When I try to open Lightroom5 (creative cloud) I am taken to the Select Catalog screen but I have no catalogs and I am not being allowed to create new ones. What can I do?

When I try to open Lightroom5 (creative cloud) I am taken to the Select Catalog screen but I have no catalogs and I am not being allowed to create new ones. What can I do to correct this?

This could be a read/write permissions issue with the destination folder for the catalog. Use your favorite search engine to search for changing disk permissions. What operating system are you using?

No DC allowed to create in NWDI-SC

Similar Messages

Maybe you are looking for