No Decline button for incoming calls

When I receive incoming calls there is no Decline button. How so I make this show up?
Thanks,
Adam

It does not solve the problem for me. I liked to decline people and instantly call them back (cause I have bonus calls) by simply sliding their name in the missed call that appeared right affter I declined.
Now if I decline by double tapping the power button the missed call does now show up on the notification screen, so I have to unlock, go to my contacts and call back... Do I need to say this is terribly worst???

Similar Messages

  • What happened to the "DECLINE" button for incoming calls?  All I get is Remind Me, Message and Slide to Answer.  Where is the RED DECLINE button?

    iOS7...incoming calls missing RED Decline button?  Where did it go?  All I get is Remind Me, Message....and Slide to Answer on the bottom.

    @gkovach - Have you tried resetting your phone, Hold both Home and Power buttons down until the Apple logo appears and wait for phone to reset itself.
    If this doesn't help you can try resetting all settings, Settings => General => Reset => Reset All Settings.  You won't lose any apps, data, music, photos, etc.  But you will have to go back in and reset all the setting that you changed from the factory defaults.

  • Where is decline button for incoming call?

    I would like to use decline or answer button instead of "slide to answer"
    It's much more easier. Or it should be updated to changeable option.

    Press the sleep/wake button to decline a call.
    If your iPhone is in sleep mode, you slide to answer.
    Send your feedback here
    http://www.apple.com/feedback/iphone.html

  • Why is the decline button for phone calls not available when the phone is locked? I need that button and it shows only when the phone is not locked on iOS 7

    Why is the decline button for phone calls not available when the phone is locked? I need that button and it shows only when the phone is not locked on iOS 7

    Yep. You need to touch the sleep/power button once to silence the ring, and twice in order for the call to go directly to Voicemail.
    Personally, I dont understand why Apple eliminated this. If you wish to give Apple feedback, do it here:
    www.apple.com/feedback

  • When will apple bring back the onscreen cancel button for incoming calls?

    when will apple bring back the onscreen cancel button for incoming calls?

    No one here would know, as there is no one from Apple here. Suggest such to Apple using this:
    http://www.apple.com/feedback/iphone.html

  • SPA525G2 - blinking line button for incoming calls

    Hi,
    I'm using a UC560 and SPA525G2 (some with 500S expansions) phones at a customer's site. At the moment all extensions at the receptionists' phones are configured as monitor lines, however there are only two states that indicate if the target extension is busy (button LED flashing red) or idle (button LED not flashing).
    How can I configure the buttons/LEDs to blink when an extensions is called, so that the receptionsts can pickup the call via PickUp function?
    I'm not even sure if this feature is available for 52G2, unfortunately the reference guide isn't very helpful either.
    Kind Regards,
    Rainhard

    Unfortunatly there is no way to do that. However you can set the lines to be shared and appear on receptionist phone. Alternatively I have developed a small console that display all phones status, that includes ringing status. More details are in the website mentioned in my profile.

  • No sound at all for incoming calls, txts, games i tried everything reset, restore , delete content and reset , reset network settings. Alarm sounds work but notification sounds don't work please and mute button is in ring mode

    No sound at all for incoming calls, txts, games. I have checked the side mute switch. Volume is all way up. All notifications are on.  I can hear tones when I go to change them. I can hear my music.  I can hear talking on videos I have taken.  I have tried everything I know to do(reset,restore,reset network settings,reset content and other settings and mute button is not ON)Please help!

    This is exactly the same problem I am having. I dropped the phone one time I think that was the reason. Now I cant seem to find any solution to fix it and it will cost me $149 to buy a new phone? There has to be a way to fix this problem.
    When I put it in speaker phone I can hear but not voices through the phone.

  • Bluetooth no longer works for incoming calls after recent update

    When I updated my Bluetooth to iOS 6, the Bluetooth no longer works for incoming calls. I press button to answer call, it makes a small cracking noise, and then sends the call to my phone. I can use the Bluetooth for outgoing calls and it works just fine. I was hoping when I updated to iOS 6.0.1 that the problem would be fixed. I have uninstalled and reinstalled Bluetooth but that has not helped either. I am frustrated. I have a LG HBM-905 Bluetooth that I loved prior to this problem.

    Magically started working today after I synced.
    Post relates to: Treo 700w (Verizon)

  • TS2634 My iPhone 4s does not ring for incoming calls. Ring tone is set/settings/sound. It used to ring. I think it has to do with updating to IOS 7.0.4? After updating IOS 7.0.3 my microphone stopped working. Had to clear/reload.

    My iPhone 4s does not ring for incoming calls. Ring tone set and used to ring. I think it has something to do with updating the IOS 7.0.4. When I updated to 7.0.3 the microphone stopped working. Had to call Apple Support and cleared phone and reloaded. ($57 charge). Any suggestions?

    Start with your finger at the bottom of the screen (about even with the home button) and swipe in an upward motion.  There should be a row of icons at the top of a grey field.  if the quarter-moon icon is bright white, tap it.  If it was (and still is) dark, take the iPhone in to be evaluated by a qualified technician.

  • After update to OS4.2.1 I can not get the ringer to work for incoming calls

    after update to OS4.2.1 I can not get the ringer to work for incoming calls. If I set Vibrate on, that's the only notification I get. Tried everything including blowing away ALL my apps and restoring phone to new. Lost all my apps but the ringer still won't ring

    God Bless u! LOL I have an otterbox case on my phone and had no clue that the mute button was there....Thank you so much!! The volume on my movies & everything else worked...even when I would go into "settings" and adjust the volume of the ringtone. I knew it was something simple...Thanks again..

  • My iphone 4S has problem in making and receiving the calls. While making the call , call fails and netwrok disappears. Like wise no voice is heard for incoming calls. This happened after return from the overseas travel.

    My iphone 4S has problem in making and receiving the calls. While making the call , call fails and netwrok disappears. Like wise no voice is heard for incoming calls. This happened after return from the overseas travel.

    Hello SamSax
    Check out the assist page below for troubleshooting call connectivity.
    Calls and connection issues
    http://www.apple.com/support/iphone/assistant/calls/
    Thanks for using Apple Support Communities.
    Regards,
    -Norm G.

  • My new iPhone 5S will not ring for incoming calls.  It vibrates. I've tried suggested tips for iPhone 4 but it doesn't work for 5S.  Please help!!

    Can anyone help.  My new iPhone 5S does not ring for incoming calls.  It vibrates.  How can I get ringer to work?

    Hello lyngos,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at:
    iPhone: No sound or distorted sound from speaker
    http://support.apple.com/kb/TS2802
    If an audio issue occurs when using a specific application, try testing other applications to see if the issue persists.
    If the iPhone is paired with a Bluetooth headset or car kit:
    Try turning off Bluetooth.
    If you experience difficulties with the Bluetooth feature, follow these troubleshooting steps.
    Restart the iPhone.
    If restarting doesn't fix the issue, ensure that your iPhone is updated to the latest version of iOS.
    Best of luck,
    Mario

  • My phone displays numbers instead of contact names for incoming calls and text - how do I fix?

    My phone displays numbers instead of contact names for incoming calls and text - how do I fix?  It used to display the names if there was a contact listed, now it just shows numbers regardless of whether or not the number corresponds to a contact name in the contact list.  Can anyone help?  I googled this problem and lots of folks have experienced it, however there is not a consensus for a resolution.

    Alexandribill, I have been having the exact same issue.  I got a new phone and restored my contacts.  If the # doesn't have the area code first then the name isn't shown.  I just added my husbands area code to my phone and called my phone from his and now his name shows up...Ugh, I have to go through and manually add the area code to all my contacts....
    I'd say Verizon needs to rewrite their program to include the area code in the restoring from backup process!

  • 2960X 15.02(EX5) %AAA-3-ACCT_LOW_MEM_UID_FAIL:AAA unable to create UID for incoming calls due to insufficient processor memory.

    Deployed four 2960X switches in a stack.  All okay for about one month then tried to web browse for the first time via firefox which partially displayed the page.  I assumed this was a browser error.  So tried Chrome then IE which both failed.  Chrome was a bad display and IE fails to connect.
    After this, I could not telnet or ssh.  Plugged into the console and immediately started receiving:
    %AAA-3-ACCT_LOW_MEM_UID_FAIL: AAA unable to create UID for incoming calls due to insufficient processor memory
    %% Low on memory; try again later
    I am unable to log in.  I have a TAC case logged but the first step to try is a reboot which will be difficult until I can get a maintenance window.  When I do get a maintenance window, I would also like to deploy a fix such as a different version of code or a work-around cofig command.  I don't mind disabling HTTP.
    Any suggestions?

    I am currently working with TAC
    The switches failed about 18 hours later and had to be rebooted to get back up.  Now that I have console/telnet access, I can see the memory being depleted mostly by the Auth Manager process at about the same rate as free memory is dropping.
    SW13#sho proc mem sort | i Auth Manager
     191   0  177721332   95004616   34757416          0          0 Auth Manager
    SW13#sho proc mem sort | i Auth Manager
     191   0  177754888   95025696   34759780          0          0 Auth Manager
    SW13#sho proc mem sort | i Auth Manager
     191   0  177774316   95037928   34761056          0          0 Auth Manager
    SW13#sho proc mem sort | i Auth Manager
     191   0  177799720   95053940   34762888          0          0 Auth Manager
    SW13#sho proc mem sort | i Auth Manager
     191   0  177824976   95069732   34764696          0          0 Auth Manager
    SW13#
    SW13#
    SW13#sho proc mem sort | i Processor
    Processor Pool Total:  442796836 Used:  103448576 Free:  339348260
    SW13#sho proc mem sort | i Processor
    Processor Pool Total:  442796836 Used:  103454416 Free:  339342420
    SW13#sho proc mem sort | i Processor
    Processor Pool Total:  442796836 Used:  103455860 Free:  339340976
    SW13#sho proc mem sort | i Processor
    Processor Pool Total:  442796836 Used:  103459236 Free:  339337600
    SW13#sho proc mem sort | i Processor
    Processor Pool Total:  442796836 Used:  103461040 Free:  339335796

  • Please help ... have new samsung ativ se windows 8 phone ... screen lock is on to require password, but on incoming calls its not locked ... how do i lock it for incoming calls too ???? thanks

    please help ... have new samsung ativ se windows 8 phone ... screen lock is on to require password, but on incoming calls its not locked ... how do i lock it for incoming calls too ???? thanks

    Personal rant, why do people write the entire problem in topic line
    It's not possible with Windows Phone 8.  What's the point, a call is coming in and the phone allows you to answer.

Maybe you are looking for