No Default ACL when using Windows Explorer?
No matter what Default ACL I specify on any user's account,
adding new documents using Windows Explorer causes an initial
ACL of "Published". Also, when I right-click on the iFS network
drive and select "iFS User Profile", it shows the Default ACL
as "Published".
Is this a known feature?
I want my users to be able to do everything from Windows
Explorer, but they need to copy and paste "template" folder
structures. If they do this in Windows Explorer, the ACL's do
not get copied. I could understand if someone says the pasted
folders are new folders, so they should get the user's Default
ACL, but even that isn't working, so the users must go through
each folder/file and reestablish an ACL using Windows Explorer.
BTW, The Web Application copies the ACLs in a copy/paste
operation.
Thanks,
David Frankel
This is not the expected behavior for Oracle 9iFS. Please
contact your Oracle Support Services representative and log a
TAR. They will diagnose and resolve this problem.
Similar Messages
-
I built a few new Windows Server 2008 R2 with SP1 VMs today and ran into a problem where Windows Update is not detecting the fact that Internet Explorer 9 is already installed. Internet Explorer 9 keeps showing up as an available update when
using Windows Update. When I try to install it as a test I get the error message: Code 9C48 Windows Update encountered an unknown error.
My normal build procedures include applying all the patches for the OS prior to any other work on the servers. The way I like to do the patching is to do every update other then IE9 in the begininng and once all the other updates have been
completed, install IE9 and then patch it if there are updates available. I followed this procedure on every build for the last year and I have not run into any issues until today. The only difference today is the latest patches that were released yesterday
April 10th, 2012. To test the theory that it may be one of the latest patches, I reinstalled Windows from scratch making sure to format the disks and then I installed IE9 right after the OS install without any other updates. Once the
server was rebooted, I checked Windows Update and Internet Explorer 9 still showed up as update (Not the Cumulative Update which normally shows up after an IE9 install) and yes, I did make sure to click the 'Check for Updates' link before I looked just
in case. My next test was to patch a couple of the servers I had built prior to April 10th, 2012. Those servers did not have any issues with the latest updates and they are not experiencing the same behavior as the newly built servers.
I ended up comparing the IE9 Version on the cleanly install OS (No updates were installed except IE9) and the servers I built last week which were patched. The versions are exactly the same.
My findings above lead me to believe that there is a problem with the latest IE9 install package (which includes the latest cumulative update) and the Windows Update detection component.
I guess I am looking for someone to report this up the chain to get this fixed so no one else runs into this problem. I know in some cases we may not be able to see additional IE9 updates until this is resolved.I just started having the same problem.
I was creating a new VM in Vsphere from our 2008 R2 SP1 image and it hasn't been updated and repacked in a while, so i have to install about 60 updates, including IE9.
I went through my normal setup as i had just created 2 VMs and updated them on Monday with no problem.
I got the same error code as you. The install looks like it installed IE9, but the update is still showing up as available in Windows Update.
I deleted the VM, created a new one, chose all updates except IE, then did that and it still shows up again.
Then i deleted the VM, installed just IE 9 and it still shows up as available on reboot.
I have a script that i can use to reset/clear WSUS cache on the computer, (Software distribution folder, and the windows update log, and recreates a certificate), so i tried that and then rebooted and it still showed up.
I then decide ok, maybe the Image got messed up somehow, so i started creating a new 2008 R2 install from scratch last night and chose to update just IE9 as the first install. I did that, rebooted and it didn't show up in Windows Updates, so i though GREAT.
I proceed to kick off the 100+ downloads needed before i left and left the console up.
When i got in to work this morning, the updater seemed stuck on 31 of 102 updates, this one in particular: KB288516. I rebooted the computer, because it wouldn't stop and just seemed stuck since last night, which these updates should only have taken about
an hour to install at most. I log back in and sure enough, it now shows Internet Explorer 9 at the bottom of the update list as being needed for install.
I believe this is Patch Tuesday week, so maybe they screwed up something with the Windows Update detection engine, because it worked fine on Monday when i had to update IE9 on 2 VMs that i created. -
How do you open the DVD tray on a K430 without using Windows Explorer?
How do you open the DVD tray on a K430 without using Windows Explorer? I can't find a button on or below the door. Am I missing something? Additionally, will the K430 boot from a DVD/CD if it finds one in the DVD tray instead of the hard disk? Please help. Thanks.
Solved!
Go to Solution.hi penguin247,
Regarding your questions:
1. Can you try to press the eject symbol on the DVD bay and observe if the DVD tray comes out.
Link to picture
2. By default, the HDD is set as the first boot device and the ODD second on the K430. You will need to change the boot order or continuously tap F12 during POST to boot from the ODD (assuming you have a bootable media inserted).
Regards
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter! -
Photo problems and can i drag and drop files using windows explorer?
i can only sync photos frm my com to my touch but i cant choose which photos i want and i tried searching for the files in itunes and i cant find them, thus cant delete them...
on top of that, i can access the files in my touch but cant find any option to delete them...
when i go the photos tab in itunes, it only shows me the window to sync files and the 2nd question too...
because when i drag and drop on itunes, it's quite laggy...and if i use windows explorer to drag and drop, will the duplicates on my playlist appear as 2 files or will it be like itunes where it can detect the main file and simply adds it to the list?
thank you...
sorry for the wall of text...There's no manual mode for photos just different ways to sync but here's a simple "How To" on managing your photos so that it's easy to add and delete what you want on the iPod:
1 Create a folder on your hard drive to hold the photos you want on your iPod. Call it iPod Photos for example
2 Drag the photos you want from your usual picture folder into the folder you just created
2 Open iTunes, select your iPod in the iTunes Source list.
3 Click the Photos tab and select “Synch photos from.”
4 Choose “Choose Folder” from the pop-up menu and select the iPod photos folder you created.
5 When you want to change what photos are on the iPod just add or remove the photos from the folder you have made and syncronise the the iPod
You can't drag photos or music to the iPod from Windows Explorer, you have to add content through iTunes or you'll not be able to view or play it. -
Transfering Files Using Windows Explorer
Rather than using windows media player, why can't I just use windows explorer to add photos to my droid 2? When I hook up my droid 2 to my computer with the usb cable, the droid appears in windows explorer. I want to just drag and drop photos to the droid. I have tried this with a couple of photos and it seems to work. Will this method cause any problems? It seems a lot easier than using windows media player to "sync" files.
It apeaqrs that they automatically go into the photo folder. I was able to access them via the "Gallery" app.
I wonder why the user guide doesn't recommend this since I find it a lot easier to do than using the "sync" process? -
When using Firefox, the tool bar above the "compose mail" window is missing. I cannot change fonts, use bold, italics, underline, change colors, align margins, etc. When using Internet Explorer the bar IS there but I prefer Firefox, as it is much faster. My operating system is Vista.
Thanks Tony T1, I have tried using the Mail -> Format drop downs...
... and using the format toolbar...
... and in both cases, Bold and Italic is greyed out... (bit hard to see in the second screenshot, but it is, honest!)
The mail message is def set as Rich Text, which you can see in the first screenshot, as the option to Make Plain Text is there... -
Specify an input file using Windows Explorer
Hi, I'm very new to Orchestrator.
Instead of writing stand-alone PowerShell scripts to perform tasks against an input file, I would like to use Orchestrator, thus avoiding the need to write the code.
Is there a way to specify an input file using Windows Explorer via Orchestrator? When invoked, I would like my Runbook to open up Windows Explorer, where I could navigate to my input file, then press OK and have my automated processes run. Do
I need to look beyond Orchestrator, say towards Service Manager, or is this natively available in Orchestrator?
Thanks,
Nick.Hi,
there are several Ways.
you can use the SCO Webconsole, to start a Runbook and put in a Porpertie.
you can use SCSM with SMPortal to define the File
or you can use the free EUPSCO Portal, to build a Webfrontend for SCO
Seidl Michael | http://www.techguy.at | twitter.com/techguyat |
facebook.com/techguyat |
youtube.com/techguyat -
Multiple instances of AcroRd32.exe while using Windows Explorer Preview Pane
I'm trying to understand why our computers behave differently while browsing PDF files using Windows Explorer with the preview pane turned on.
All are Windows 7 Pro 32-bit.
The scenario: Open Windows Explorer with the preview pane turned on, go to a folder full of PDF files, and start single-clicking on them, one by one down the list. Keep Task Manager open, on the Processes tab, showing processes from all users, as you click on the PDF files.
On two of the computers, you can keep clicking right on the down the list, and the preview pane shows the PDF file contents immediately with each click. The Task Manager does not show any instances of AcroRd32.exe running, and the machine does not slow down no matter how quickly you go down the list of files. You can keep clicking all day.
On the other two computers, as you keep clicking down the list, after about six or seven clicks, the machine starts getting slower and slower in responding to display the PDF contents. In Task Manager, you see multiple instances of AcroRd32.exe executing, and the list keeps growing with more instances - I've seen up to 8, with memory allocations to some of the instances approaching 700MB! One of the CPU cores goes to 100%. If you stop clicking in Windows Explorer, eventually, the machine recovers, and the list of multiple instances of AcroRd32.exe shrinks, but never goes away completely until you close the Explorer window.
What could account for this difference? One of the users is complaining - he often browses folders of scanned PDFs looking for invoices, transactions, etc., and has to go slowly to keep his machine from bogging down. I don't know when this behavior started.
It doesn't matter if it is a shared folder on a network resource or one locally on the machine, or if it is an admin or standard Windows account - the behavior is the same. I've tried uninstalling and reinstalling Adobe Reader, to no avail.
Thanks for any ideas.Yes i'm having this issue to.
Becomes worse after display many documents in pane, worst even if scanned images are in.
After killing the process, sometimes it generate even more process.
After Killing all the process, sometimes need to deactivate the pane view and activate
again to restore normal preview.
Sometimes it takes a lot of time to progress to file below, if i wait, going to files above, it pass
the file that shows delay, without any problem.
I add received from Microsoft, in answer to the same issue to uninstall adobe reader and install
latest version. It become a bit more stable, but problem still shows.
Abobe reader: 10.1.0, ATI latest drivers 11-07
Please, Help! -
How to remove Open/Save prompt when using Internet Explorer
Acrobat XI Pro was deployed with custom MST that had When using Internet Explorer prompt for Open/Save. Is there a hack that will disable this prompt without having to re-install Acrobat XI Pro?
An engineer gave me a possible solution, but I don't have permission on my machine to test it. You can try the following:
-- snip --
This is because of not having necessary permissions to edit the registry. To obtain the permission, follow following steps:
Right click on “HKEY_CLASSES_ROOT\AcroPDF.FDF.1” and click permissions.
On permissions dialog, click Advanced.
In the new dialog, select Owner tab and make current user as owner.
Click Apply and close the dialog.
Close the permission dialog.
Try editing the registry as suggested. -
I just downloaded Autocad to my downloads file, how do I take it from there to my Parallels Desktop without using "Windows Explorer"?
Did you download it from Adobe or a pop up? If it was a pop up do not open it. Make sure you only get it directly from Adobe here:
http://get.adobe.com/flashplayer/
There is some malware that poses as Flash, in pop ups.
Then do as macbig explained double click on the file,
After you open and install the .dmg reboot your computer to complete the installation -
Problems in using Windows Explorer with VPC Virtual PC?
Has anybody experienced problems in using Windows Explorer with VPC Virtual PC?
Lacking any "forbidden" or "appropriate usage" guidelines, I regularly use Windows Explorer (Windows 2000) to transfer file from the desktop. I have occasionally sensed that this might be wrong. Today I inadvertently clicked the MAC harddrive instead of the Desktop (within Windows Explorer) and caused all manner of mischief.
Any other views please?Let me correct this:
I regularly use Windows Explorer (Windows 2000) to transfer files from the "Mac" desktop
Any ideas please Virtual PC VPC users? -
RPC Server not Available error when using Windows Fax & Scan under Windows 7
RPC Server not Available error when using Windows Fax & Scan under Windows 7
Hi,
On current situation, please remove the old fax account and re-add a new fax account in Windows Fax and Scan, then check if this issue sill exist. For more details, please refer to following similar thread and artilces.
RPC Server not Available error when using Windows Fax & Scan
under Windows
The local fax account is inaccessible after you rename a Windows Vista-based computer
Cannot send fax from Windows Vista/Windows 7 PC with “RPC Server not Available” error message
Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. Please
make sure that you completely understand the risk before retrieving any suggestions from the above link.
If any update, please feel free to let me know.
Best regards,
Justin Gu
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected] -
Corrupt data error when using Windows backup on Oracle
Our SAP servers include a SDLT internal tape drive that we use for doing a complete system backup. When using Windows Backup we get the following message in the backup log:
WARNING: Portions of "\oracle\T00\sapdata1\protd_2\PROTD.DATA2" cannot be read. The backed up data is corrupt or incomplete.
This file will not restore correctly.
This is occuring on a couple of different systems but the wierd thing is when this happens in occurs on one Oracle drive in one system and the other Oracle drive on another system i.e. the G: drive on our TST sysytem and the E: drive on another. The E: and G: drives contain the main Oracle datafiles.
Has anybody ever encounter something like this and what can I do about it?
Thanks;
Gale S.Especially no backup tool would know about the
fact
that a Oracle block had been changed after it was
copied.
Now I have to contracdict
There are backup tools (e. g. OpenFile Manager from
Legato/EMC), that track the filesystem changes and
makes sure, the backups are consistent in sense of
filesystem blocks. We´re backing up some ORA
databases (non-SAP, 7.3.4 and 8.1.7) for ages now -
and I never saw this kind of corruptions.
Well, these Backup-Tools do perform copies I/O-Consistent. That's different than DB-Block-consistent in the first place. Anyhow due to the fact that the DBMS do have a syncronizing between I/Os and writing out the blocks this leads both to consistent blocks.
I just wonder, how the database would deal with such
"inconsistent" files. Given the fact, you start a
backup at filesystem block 0, the database is being
backed up and a transaction is committed and
something is written to block 100, 200 and 500. The
backup is on block 300. If you now restore the
database, it has the already commited block 500 in
the file but 100 and 200 are not yet written in the
database file. The redo will then find an already
commited transaction on 500. What magic will tell the
engine, that this is due to an online database
backup? I mean, if you set the tablespace to backup,
the engine "knows" the state - but if you just backup
the file, the engine is unaware of that... I´m just
curious how this is handled...
Well the trick here is: we tell the database before we plan to copy the data. When a ONLINE backup is done, the tablespaces are set into BACKUP mode. This changes two things for us:
1. The datafile headers of these tablespaces are not updated anymore although dirty blocks are still written out to these files. Since the control files that keep the SCN (system change number) are updated nevertheless, the database will know at recovery time that these files had been in online backup mode and do need recovery to become consistent again.
2. The UNDO-information is not only written out to the UNDO/ROLLBACK-Tablespace but additionally to the REDOLOGS. So, for the time where the tablespaces are in BACKUP mode, we have all information needed to make a block consistent again - regardless if a transaction had been commited or rolled back - in the redolog. So a full recovery of all changes is possible with
that.
That's basically the "magic" behind this.
If the copy of the datafile is done without this - well, then there's no magician in the world that would been able to get it consistent again. Online Backups with Oracle are only possible with BACKUP mode or RMAN (ok, and possible some 3rd party hacks...).
KR Lars -
"Could not complete scan" error when using Windows Fax and Scan
"Could not complete scan" error when using Windows Fax and Scan with a HP OfficeJet Pro 8600 Plus All-In-One network printer.
Printing is fine.
When using the HP Scan application, get the error "Scanner communication cannot be established".
When scanning from the printer itself it fails with the same message. In addition the printer panel displays the error:
"The scan could not be completed due to one or more of the following issues:
Connection to the computer is lost
The scanner is in use
OCR application is not installed"
My PC is a HP Compaq Pro 6300 SFF 64bit, with ethernet cable to the router and ethernet cable to the printer
Originally ran Windows 8.0; recently upgraded to Windows 8.1.
Older separate Netgear router and modem was replaced with a newer Netgear Router/Modem, but both experienced the same problem.
There was no problem with the original Windows 8.0 configuration and only after upgrading to 8.1 did the problem emerge.
On my home netowrk I have an HP ProBook 6550b running Windows 7 sp1 that uses wireless to get to the Router, and it has no problem with scanning.
I have followed the recommendations of a number of articles relating to this issue (including: http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c02915410&product=4323659#N94), but there has been no change in behaviour.
The printer has a static IP address;
Power settings have been adjusted to Never for Turn off Hard Disk; Sleep and Hybrid Sleep.
Scanning has been tested with all firewalls and antivirus turned off and in Selective Startup.
The printer has been plugged directly into the power socket.
With all these settings the Windows 8.1 cannot scan while the Windows 7 laptop with wireless to the router has no problems.
Appreciate any insights into this problem.
I can only surmise that the problem is a compatibility problem between the 8600 Printer and Windows 8.1.
Any ideas?
regards,
MotorbikeYou can determine if there is compatiblity between the printer and PC by checking the Windows 8.1 hardware compatibility list. I have done that and it is shown to be fully compatible. If the driver you installed before was only the basic driver,it would explain the lack of scan and copy functionality.
Download and install the Windows 8.1 full feature driver and software on the HP Compaq Pro 6300 SFF 64bit PC .
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=bi-108858-4&cc=us&dlc=en&lc=en...
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer -
On G71-340US: very low volume when using DVD player, but OK when using Windows Media Player.
Just purchased new laptop G71-340US. Volume (at full tilt) is decent when using Windows Media Player, but when using DVD player, volume is so low I can't really hear volume on a movie unless room is completely quiet, and I am right in front of laptop. Any suggestions, or is it really this bad?
I don't have the answer, but I certainly agree. The G71-340us is severly under powered in the audio department. You would think with the extra room in the 17in. chasis they could have put a sound system with a lot more power. Other than that it's a great machine.
Maybe you are looking for
-
Hi am running PC suite 6.86.9.0 and want to install 7.0.8.2. OS is XP service pk 3. Installation is never completed as I get a message saying can not remove older version. An suggestions?
-
Which av cable do I use to hook up my ipod nano 3g to my stereo?
Do I use the composite or component? Help!
-
Event should trigger when enter is pressed on select option for validation
Hi, I want to trigger a event when enter is pressed on a select option field for validation. I have created a select option through coding. I am not able to find out any method or class for that. please advice.
-
Greetings I am an Iranian citizen I had a question regarding buying iPad Do you have a product that I want to send Iran?
-
Unable to recreate ASM instance in 10g rac (2 node )
Hi, I have successfully installed the clusterware and database software.during ASM installation it got failed, i i have cleaned up ASM setup. Now i am not able to create asm instance it show following message PRKS-1011:Failed to check status of ASM i