No default webservices record

Hi
The following keeps appearing in my logfiles (on Leopard Server 10.5.8).
2011-05-25 06.59.38 servermgrd[85] servermgr_web: No default web services record. Group service settings will not be available.
I have done a lot of searching in the forums and via google but have not found an explanation for this or how to set this (using command line).
My system.log contains
servermgrd[85]: *** -[WPWebServices defaultWebServiceWithSession:]: couldn't obtain the MAC address of interface en0
I suspect these two thing are connected. The machine should not be looking at en0 since my built-in ethernet is broken and does not work.
Netstat -rn tells me that there is no post for en0, only for lo0 and en2 (which is correct considering what interfaces are active).
My dns is correct, changeip -checkhostname tells me the records match.
I simply cannot understand why servermgrd looks for en0? Also i am quite unsure what the defaultWebService is and how to change it's settings.
This is driving me nuts and I would really be grateful if someone could help me out here.
Thanks

Same problem here. Not sure if it's related, but the DirectoryService daemon keeps crashing, preventing users from logging in. And Server Admin is extremely slow and the Save button is grayed out under web services..
6/9/11 5:28:40 AM com.apple.launchd[477] (0x1095f0.Locum[1444]) Exited: Terminated
6/9/11 5:28:40 AM com.apple.launchd[477] (0x1095f0.Locum[1444]) Exited: Terminated
6/9/11 5:28:40 AM com.apple.launchd[477] (0x1095f0.Locum[1444]) Exited: Terminated
6/9/11 5:28:59 AM servermgrd[1042] servermgr_web: No default web services record. Group service settings will not be available.
6/9/11 5:28:59 AM servermgrd[1042] servermgr_web: No default web services record. Group service settings will not be available.
(etc...)
Mac Pro 4 core 2.8, 12 GB RAM, OS X Server 10.5.8

Similar Messages

How can I set up a default (pre-recorded) voicemail greeting on iphone 4s?

How can I set up a default (pre-recorded) voicemail greeting on iphone 4s?i dont want a custom one with my voice i want the pre-recorded where a lady says my number . how do i get that?

Voicemail is a cell phone carrier function. Contact your carrier to see if they have this option. If not, i'm sure you can download a sound file from the internet with a greeting and add your name. Then play it back on you PC while holding your iPhone near the speaker when recording the greeting to voicemail.

I want to change my default MX record with another one. How do I do that?

If you want to change the default domain for mail you will need to remove all the MX Records (first the non-default ones then the default one) and then add the one you want to make default, first. Note, once the default MX Record will be removed all the mailboxes created on the site will be deleted and there is no way to retrieve those emails once they are hard deleted, so you should back-up your mail before performing this change.

Hi Sherrybug,
Go into Settings>iTunes & App Store, and click on your Apple ID, then click on View Apple ID, and type in your passcode to sign on. Then:
- Click on the Payment Information option
- Click on the Credit Card Type
- Type in the Card Details, Billing Address, etc. (be sure to fill in your security code)
When complete, click Done
You will receive an email indicating that your payment info has been changed.
Cheers,
GB

Oracle forms standard/default menu - Record Delete option

Hi ,
Oracle forms provides a standard menu with the below options.
Action , Query , Block , Record , Help etc.
Under each of these Menu options there are sub options.
Eg: Under Record we have Previous , Next , Insert , Delete etc.
Can someone please tell me how to control this menu item options for different forms.
Eg: for 1 form i want to allow the Record - Delete option but for another form i dont want to give this option.
How to do this ??
Please help....
I tried to search for the solution but couldnt get the right answer. Hope someone will help me out here.
Regards,
SRT

Hello,
The Oracle Forms documentation states:
The Default menu is built-in to every form, and is not a separate menu module.
You cannot change the structure of the Default menu or edit the menu items it
displays.
If your application requires
unique menu functions, you must create a custom menu module and attach it to
your form.
If the internal default menu almost meets your needs, you can attach the
"menudef.mmb" approximation of the default menu to the form. You can then
rename and edit this menu.
You can download the demo version for 10g R2 and menudefs_10g.mmb is included with the demos.
http://download.oracle.com/otndocs/demos/Forms_Demos_10gr2.zip
You will get menudef_10g.mmb and menudefs_10g.mmb.
If needed check metalink note:
Differences between menudef.mmb and menudefs.mmb menu files. [ID 1081136.1]
Kind regards,
Alex
If someone's answer is helpful or correct please mark it accordingly.

Using Logger ,how to disable the default date recording?

Hi,
I m using Logger class of java.util.logging package to maintain logs for the application. By default, it writes date and the package path for every log statement.But, I dont want it. I want to simply record the error and information statements.
Is there any way to switch off the default recording of date and package path?
Regards
Shweta

Even I am facing the same problem...Is there anyone who can please help us as the log record becomes unreadable because of dates appended to every message

Look in Selector Default for Record Types

Is it possible to set a Look in Selector Default for each record type? For example, I'd like the Look in Selector default for account, contact, and opportunity to be defaulted to All but the Look in Selector default for Custom Object 1 to default to a specifc book we defined. I know that I can set the default look in selector for a given user but not sure if it can be set for a specific record type.

At this time it is not possible to set the Look in Selector by record type.

How to default condition record currency when creating in VK11

Hello experts,
I have created a pricing table with fields that are not sales org specific. I have subsequently created a condition type that uses an access sequence that uses this table. The condition type is set up as a cond class B(price) with a calculation type B(fixed amount). All works great, however, when creating the condition record it is requiring an entry for currency. Is there a way I can have currency default in when creating the condition record?

Hi,
NO U cannot have it since Currency in sales is in Sales Org which is missing in yr config.
U need to enter it manually.
Regards
Krishna

Set Weekly View as default in Record Working time

Hi,
Please let me know in ESS (Time Management) how can I set Weekly View as default instead of Daily view under Record Working time in EHP5?
1> If Personalization could only be applied on JAVA Web Dynpro iVews, what can be done in case of WD4A?
2> Can the view changes be done in Content Administration or the changes could only be done in "Component configuration/enhancement" to achieve the requirement? If it could only be done using "Component configuration/enhancement" can you please help me with the same.
Thanks for your help!

Hi,
In R3, goto PM - PA - ESS - Service specific settings - Woring time - Record working time - Set up data entry profile - Select the data entry profile which is assigned to the employees in their CVR Parameters(ex.ess sf) - Maintain the PERIOD SETTING as 2 (which is the weekly view).
Regards
Priya

Webservice: recording, tracing, log:

Hi,
Can you tell me about your experience ( as system administrator ) in following up processes where SAP webservices are involved, please ?
I know that transaction SICF provides a recording possibility. Are you using this tool to log what is sent to SAP or are there other options to log what has been sent ?
If the recording is not activated and an error has happened, is there a way to trace what went wrong ?
Thanks,
Rolf.

No log found

Xperia Z3 default screen recorder

Something new for me, there is a default on screen recorder for the Xperia Z3 which is good that i don't need to root my phone to use that feature. Nice.
May refer to the youtube link for the recordings.
http://youtu.be/WxWanZMidtg
I can accept failure.... I can't accept not trying - Michael Jordan

Same problem exists.
I just noticed that there a few new small cracks on the screen! The phone was just in my pocket on it's own!!! **bleep**!?
Could this be the cause?
I have already had a faulty Sony Xperia Z3 that I I had replaced (via Optus) - the last one wouldn't stop vibrating, even when powered down.
What now?! I am really losing patience with the issues I am having with my Sony phones. I would like some quick help. Please!

HT201436 Can't retrieve voicemail. Phone takes me to greeting screen, but when I select default or record a custom greeting, the save it, phone screen continues to show "saving greeting" I cannot get to the screen to check voicemail

I think phone is 4s but might be a 4. Can't retrieve voicemail. I've had the phone for months and have used voicemail. Now when I select voicemail the phone takes me to a page to set up greeting (custom or default) and when I select either one and then try to save it ( thinking maybe then I can get to my messages) the screen just keeps showing "saving greeting"
Thanks

Safe Mode (booting while holding down Shift key) should have disabled all the Login items, as well as any non-Apple startup items, including the launchd items.
I'm out of "Easy" ideas, and anything I say after this, is just wild ideas, so feel free to ignore me.
Have you tried different USB cables? Maybe there is an issue with the USB connector, or the way you have to bend things to access your Mac mini USB ports is different from accessing your Wife's Mac mini USB ports?
Try alternate USB ports. Maybe there is a bad/marginal port/connector.
Try removing all your existing USB devices. If you are using a USB keyboard and/or mouse, try using a different USB keyboard and/or mouse (maybe borrow them from your Wife's Mac mini). Basically remove all other USB devices and replace the essential keyboard and mouse with known good ones).
Desperate measure (Backup first before proceeding down this path). Using a Firewire cable, boot your Wife's Mac mini into Firewire Target Mode. Connect a Firewire cable between your Mac mini and your Wife's while your Wife's is in Target Mode. Now boot your Mac mini holding down the "Option" key, and select your Wife's Mac mini's disk to boot from. Essentially you will be using your hardware and your Wife's software to see if you have a hardware issue, or if it is a software issue. That is to say if it works with your Mac mini booted from your Wife's boot disk, then your hardware is fine, but there is something wrong with your software. If it does not work, then it is your hardware.
Hopefully, you Wife will not kill you for even mentioning this. ALSO, if you do try this, BACKUP, BACKUP, BACKUP first, especailly her system. Not that anything will go wrong, but if it does, the last thing you want is an annoyed Wife :-) BACKUP!

Set default result in interaction record

Hello gurus,
Could you please share any idea how it is possible to set default Interaction Record result? By default it is blank and user needs to select the value from the list on the IR page, but it is not convinient. Unfortunately I can't find the way how to do that.
Best regards,
Kate

Hello,
I suppose you're talking about the "Goal" field of the Interaction Record?
This can be done quite easily, first you need to know the transaction type of the interaction record you use. (the SAP standard transaction type for interaction record is '0010')
In SPRO>CRM>Transaction-->Define Transaction Types.
Look for your transaction type for IR (SAP std 0010) and select it, then select 'Assignment of business transaction categories' and select 'BUS2000126 Business Activity'. Then select 'Customizing header' and there you can default the header values including the default value for 'Goal'.
Hope this helps,
Regards,
Joost

Default category of delivery date in schedule lines

Hi,
When i enter transaction ME38, select an item and click on delivery schedule to input schedule lines,
by default i can see 'M' in field category of delivery date.
'M' is displayed in all the records, whether a sch line exists or not.
In another system of mine, when i try to enter sch lines thru ME38, by default all records show blank in category of delivery date.
I want to change the default category of delivery date as 'D' or want to keep it blank , but not 'M'.
How can i change this???
Regards,
Sneha
Points will be awarded for helpful answers *

Hi w1n,
following is the setting in my system.
EN     C     5     Calendar format
EN     D     1     Day format
EN     K     2     Planning calender
EN     M     3     MONTH FORMAT
EN     P     4     Period format
EN     W     2     Week Format
Still it is showing me M as default in all the lines.
M                 06.2008                  32      R01.06.2008
M                 06.2008                  24      R01.06.2008
M                 06.2008                  24      R01.06.2008
M
M
M
Can u pls help me out ???
Regards,

Problem in using webservice in My ADF App

hi ,OTN
I used this tutorial http://www.oracle.com/technetwork/testcontent/wsdc-085537.html to have a webservice in my ADF Application that returns Weather Application.I used Jdeveloper 11g 11.1.1.3.0. by follwing this tutorial I could get the weather Info.but the first time I run my page or the first time I press the button getWeatherBy Name after writing the place there is an error Mesage as follows
System.Web.Services.Protocols.SoapException: Server was unable to process request. ---> System.Exception: Error occured when get webservices record ---> System.Data.SqlClient.SqlException: Procedure or function 'GetLatByPlace' expects parameter '@ZipcodeName', which was not supplied. at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection) at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning() at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj) at System.Data.SqlClient.SqlDataReader.ConsumeMetaData() at System.Data.SqlClient.SqlDataReader.get_MetaData() at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString) at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async) at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, DbAsyncResult result) at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method) at System.Data.SqlClient.SqlCommand.ExecuteReader(CommandBehavior behavior, String method) at System.Data.SqlClient.SqlCommand.ExecuteReader(CommandBehavior behavior) at WeatherService.WeatherForecast.GetLatLonDataByPlaceName(String PlaceName) --- End of inner exception stack trace --- at WeatherService.WeatherForecast.GetLatLonDataByPlaceName(String PlaceName) at WeatherService.WeatherForecast.GetWeatherByPlaceName(String PlaceName) --- End of inner exception stack trac
when I press ok to this error Message.I could write the name of place and got Weather Info,so How can I prevent this error Message that appear every first Time the user call the page of Weather Forecast?
note : in the tutorial I noticed that it explained that there is an error Message will appear ( On the error window click OK. )
Edited by: Miar on Oct 13, 2010 6:03 AM

hi,frank
yes,the problem is that he asks about his parameter when the page is rendered for the first time,in the tutorial it prevents calling the web service before having
provided the place Name by making the refresh condition of the iterator #{adfFacesContext.initialRender} , although I did this the web Service is called,How I prevent calling it when i run my page ?
thanks shay,I will try it and tell the result
Edited by: Miar on Oct 13, 2010 8:37 AM

HELP: Appending new records to File containing 1 Record

Hi, im transferring records to a file, the first line of the file contains the headers (used 'NO END OF LINE'). The problem is that when I write the data records to the file, the first record continues from the end of the Headers line, hence i have a record missing in my statement. I want to append the records below the Headers line. I tried opening the dataset 'for appending' instead of 'for output' but I get the same result.
lv_ds_name_ex = Filename
Code:
Getting field descriptions to use as headers and tranferring to file
open the dataset
OPEN DATASET lv_ds_name_ex FOR OUTPUT IN TEXT MODE ENCODING DEFAULT.
CLEAR: lt_dfies.
" Get field descriptions from settlement table
CALL FUNCTION 'DDIF_FIELDINFO_GET'
    EXPORTING
      tabname   = 'zrl_generic_record'
    TABLES
      dfies_tab = lt_dfies.
write column headers to the file
LOOP AT lt_dfies.
    IF lt_dfies-scrtext_m = 'Char15'.
      IF lv_counter < 1.
        lt_dfies-scrtext_m = 'Remuneration Amount'.
        lv_counter = lv_counter + 1.
      ELSE.
        lt_dfies-scrtext_m = 'Commission Amount'.
      ENDIF.
    ENDIF.
    TRANSFER lt_dfies-scrtext_m TO lv_ds_name_ex NO END OF LINE.
    TRANSFER ';' TO lv_ds_name_ex NO END OF LINE.
ENDLOOP.
Close DATASET lv_ds_name_ex.
Transferring data records to file
open the dataset
OPEN DATASET lv_ds_name_ex FOR APPENDING IN TEXT MODE ENCODING DEFAULT.
write records to the file
LOOP AT lt_generic_record_csv INTO ls_generic_record_csv.
        TRANSFER ls_generic_record_csv TO lv_ds_name_ex.
ENDLOOP.
"close the dataset
CLOSE DATASET lv_ds_name_ex.

Solution: TRANSFER " " TO lv_ds_name_ex. (This simply adds an empty line/record with an end of line) see code before closing the dataset
open the dataset
OPEN DATASET lv_ds_name_ex FOR OUTPUT IN TEXT MODE ENCODING DEFAULT.
CLEAR: lt_dfies.
" Get field descriptions from settlement table
CALL FUNCTION 'DDIF_FIELDINFO_GET'
EXPORTING
tabname = 'zrl_generic_record'
TABLES
dfies_tab = lt_dfies.
write column headers to the file
LOOP AT lt_dfies.
IF lt_dfies-scrtext_m = 'Char15'.
IF lv_counter < 1.
lt_dfies-scrtext_m = 'Remuneration Amount'.
lv_counter = lv_counter + 1.
ELSE.
lt_dfies-scrtext_m = 'Commission Amount'.
ENDIF.
ENDIF.
TRANSFER lt_dfies-scrtext_m TO lv_ds_name_ex NO END OF LINE.
TRANSFER ';' TO lv_ds_name_ex NO END OF LINE.
ENDLOOP.
TRANSFER " " TO lv_ds_name_ex.
Close DATASET lv_ds_name_ex.
open the dataset
OPEN DATASET lv_ds_name_ex FOR APPENDING IN TEXT MODE ENCODING DEFAULT.
write records to the file
LOOP AT lt_generic_record_csv INTO ls_generic_record_csv.
TRANSFER ls_generic_record_csv TO lv_ds_name_ex.
ENDLOOP.
"close the dataset
CLOSE DATASET lv_ds_name_ex.
Edited by: Daniel Lebotse on May 15, 2008 5:42 PM

No default webservices record

Similar Messages

Maybe you are looking for