No default workstation application TRM on applying SAP Note 1320374

Hello Gurus,
My question, as you can see in the title is that I'm trying to apply the SAP Note 1320374 and in the step B7 it sais that you have to go to this path,
IMG--> Cross-Apllication Components -->Document Management --> Control Data --> Define Document Types
and enter:
Default Application: TRM
Dis. WS Apllic. : TRM
and some more data.
And the question is that I don't have defined 'TRM' application in my system, so I've discovered that I can create that application by going in the spro to the path "Define Workstation Apllication" but i don't know the data I have to put on it.
I would appreciate if someone let me know what is the necessary data on that application.
Thanks!

Maybe if I put the full path where the Define Workstation Application is located, someone could check if has the entry TRM on it.
Path: IMG--> Cross-Apllication Components -->Document Management --> General Data --> Define Workstation Application
Any response will be highly appreciated
<< Moderator message - Please do not promise points >>
Edited by: Rob Burbank on Jan 17, 2011 4:29 PM

Similar Messages

  • Regarding applying SAP Note 1172084

    Hi all,
    I have applied SAP Note 1172084 - PKMC: Dump DYNPRO_NOT_FOUND for control cycles of type SeqJC through SNOTE  as we are receiving run time error Dynpro Not Found...Even though it didnt solve our problem..
    Read in some site that if any changes are done to the screen, we need to manually apply the note (i.e. not through SNOTE), but i didnt find any program or function module in the source code mentioned by the note...
    Could you pls. help in solving the problem..
    Thanks,
    Subbu

    > Read in some site that if any changes are done to the screen, we need to manually apply the note (i.e. not through SNOTE), but i didnt find any program or function module in the source code mentioned by the note...
    There are corrections in the note, if you scroll down to "correction instructions" for your release and you open it, there are 4 program changes displayed.
    If you can apply the note via SNOTE and the program is still dumping I'd open an OSS call.
    Markus

  • Outdated prerequisit when applying SAP Note

    Hi Experts,
    Ask a noob question here.
    When we apply SAP note, SAP may popup the window to download an outdated prerequisit. For example, when I apply note A on release 700, system may popup to let me download note B, whose fix has been included in release 700. In this case, shall I just go ahead to download the old prerequisit in order to apply the new note?
    Actually I awlays download the old note in order to apply the new note. There seems to be no impact. But I want to know if there is any offical note from SAP to confirm the approach.
    Many thanks!
    Regards.

    your approach is good.. is what you should do.. just an advice.. before going to the SNOTE to implement the notes, try to trace the requirements by yourself, to know what you are applying, read carefully the notes and the pre-requisites, after this apply the notes.. this is what I always do to know the impact..
    Regards..
    Esteban

  • How to apply SAP Notes

    I need to apply SAP notes for Object TRINT_APPEND_COMM
    How to apply SAP Notes? pls guide

    Hello,
    - Transaction SNOTE;
    - click on the box "SAP NOTE download";
    - enter the note number;
    - after the download, the note will appear in the list below; if the note has a blue arrow as a mark, then it is applyable;
    - double click on that arrow;
    - follow the steps on the screen (which will guide you thru the process, creating a Change Request and so on);
    that's it
    EDIT: i forgot you must be allowed to apply notes, e.g. you should be a thrusted and authorized user.
    Edited by: Matteo Montalto on Nov 3, 2009 11:55 AM

  • Applying SAP note 1358294

    Dear All,
    i m having ecc6 and I have to apply SAP note 1358294 on DEV,QUA,and PRD server.I read the note but i m bit confused So before applying this note i have to import patch level to SAPKH60017 ?
    OR
    I can directly apply this Snote.
    Regards
    Ashok

    Dear Subhash and Bose,
    Thnx for ur valuable reply.So i dont to import any patch jst i have to apply the note?
    I have to apply this note from SNOTE transaction code from 000 client. Do i have to make user in 000 client with having SAP_ALL and SAP_NEW profile.As we do during importing patches?
    Or
    Directly i can do from DDIC user in 000 client.Should i have take some Prerequisite like all user be locked while applying SNOTE.
    Regards
    Ashok

  • Applying sap note

    Dear all,
    I want to apply a sap note 1105997 on my system. I have downloaded it in tcode snote. i have some queries in this regarding.
    1. I should implement this note from client 000 or my 800 client.
    2. In status, it is showing status *cannot be implemented*. What should i do?
    3. Tel me the step by step procedure to implement it.
    4. In future, when i will implement the support pack in which it is delivered, what will i have to do?
    Thanks in advance,
    Ankit

    Hello Ankit,
    Here are you answers
    1. You can apply the note in any client
    2. That means that you can't implement the note either the note has been implemented with the support packs that you have done already or this is not valid for you version
    3. Please use the following link for applying note
    http://www.sappoint.com/PHPWebUI/Documents/OSS%20Note%20Application%20-%20Using%20SNOTE.pdf
    4. You will need to do Modification adjustments through SPAU if any condition like this happens
    Hope it helps
    Rohit

  • Applying SAP Notes or BWDK*

    Hi Experts,
      I had issue Info-object and SAP suggested
    " Import Support Package 16 for SAP NetWeaver 7.0 BI (BI Patch 16 or
    SAPKW70016) into your BI system. The Support Package is available
    when Note 1074388 "SAPBINews BI7.0 Support Package 16", which
    describes this Support Package in more detail, is released for
    customers."
    But how do i do that?
    How can i import the support pack first to DEV system and test it ?
    Can somebody give me step by step procedure ?
    I will assign points

    Hi,
    Pls Go to service.sap.com/https://websmp103.sap-ag.de/notes  ---> click on SAP note search under SAP Support portal,You will have to log in with a valid user id and password.
    You can search notes by typing the SAP Note Number, download it & There will be instructions for applying notes.
    Hope this helps,
    Regards
    CSM Reddy

  • Applying SAP Notes using SNOTE

    Hi,
    I have question regarding transaction SNOTE.
    I am applying one note in my development system. This SAP note has some manual steps, like create function module in the given function group with the given short text.
    If I follow the manual steps mentioned in the note, it ask for Access key while saving the changes.
    How to work on the manual steps mentioned in SAP notes?
    Regards,
    Yogita

    Hello Yogia,
    It doesn't make any difference. Do it as the Note has Mentioned. If system ask for the access key then you can contact your BASIS people.
    They will generate a Key for you.
    Thanks,
    Chidanand

  • Modification problems while applying SAP Note manually

    Hi Guys,
    I am facing some problems while applying a SAP note manually (it cannot be applied without manual changes).
    There is one standard program which I am trying to change for this purpose, but it does not allow me to do so saying "Carry out modification comparison for REPS RPCT8AR1_01 first. No changes possible" !!
    Now I can go to SPAU and reset the object, but it will lose all its changes which was done
    by 2 SAP notes previously.
    How can I apply my SAP Note without reverting the changes ? If I revert the changes, I lose
    the changes for other 2 notes !!
    Is there a solution for this? please help asap.
    Many thanks in advance,
    Sandip.

    If you did not modified the program manually, you dont have to worry. implement your note from SNOTE transaction.
    even if you loose previous modifications, you can always get them back by going SPAU transaction and import the transport numbers.
    I had the same problem but we had manual changes to the program that is why didnt allow to implement note

  • Applying SAP NOTES

    Gurus,
    I am a Functional Consultant. I need an SAP Note to be applied to the system which most likely, basis team will do it for me. I just know the Note number. What kind of information do I need to give to the Basis Team .. just the SAP Note number would enough? Or would they need some other information.
    Appreciate your help and points would be rewarded promptly

    The changes mentioned in the correction instructions of the Note are applied in your system If it relates to a change in a program, the source code gets modified accordingly.. if a new dictionary object like a table or a structure is added, the object  gets created in your system.. this is usually tied to Transport request  and moved from Dev to Qa to Prod as per the normal CTS process.. Occassionally, you might have to open the QA & Prod to apply the correction manually as SNOTE might not be applicable for all Notes.. but I found that to be very rare.. but quite possible..
    ~Suresh

  • Issues to apply SAP Note

    We found an issue while transporting ABAP Webdynpro application that content is not completely transported to other system.
    And found a note that applies to our scenario. But now we are not sure whether to apply the note to source system or target system or both?
    Here is the note: 1164289
    Please help.
    Thanks

    Hi Vikram,
    Please do testing with Std. T-code - J1incert.
    You could be doing testing with the z-t-code created at your end.
    Regards,
    Shridhar

  • Regarding Applying SAP Note 820622

    Hi,
    Can any one pls let me know applying this SAP Note 820622 is suggestible in Production XI Server or not
    Regards
    Vamsi

    Thanks Michal,
    when our SAP Security person ran Early Watch reports for PX1 show a Critical error related to a reorganization job.
    Then they found this SAP Note and reviewing to apply  this note,  is there any harm??
    So now i can suggest them to apply this Note...
    Thanks so much
    REgards

  • Apply SAP note attachment

    Hi!
       I would like to apply the SAP note attachment, I have downloaded 2 attachments Note922509_470_cust.SAR and Note922509_470_sys.SAR, but have no idea how to apply this. Can any gurus teach me?
    thanks in advance!
    best regards,
    ying ying

    if you have snote (tcode) you can directly apply the oss notes, otherwise you have to see the snote changes and apply manually.
    if at all you are applying through snote, if there is a change in function module you have to do some manual things. please take care of it.

  • Apply sap note

    Dear Team,
    I want to Implement SAP Note 62077 in my Development Sytem. Then I want to Trabsport in PRD.
    Please Explain how I apply this note in DEV  and what is Prerequest for this Note.?
    Withc Client I should Login 000 or other Client,
    Plesae Explain........
    Manu

    HI Manu,
    As suggested by others experts in the forum let fuctional maintain number range.
    But I wil explain you how to install SNOTE.
    Go to client 000 and use tcode SNOTE.
    If your system is connected to OSS you can downlod the note directly from Market place in Tcode SNOTE.
    OR
    Download note from market place and upload with Snote Transaction.
    While Applying System will popup for Trasport request Number, Note this trasport request number and after that release this note after that if you import the request in Quality and Production changes will get implemented.
    Best Luck,
    Atil

  • Backup before applying Sap Notes

    Hi,
    Im about to apply a certain Sap note but I want to backup the program such that If it still doesnt solve the problem, I can revert back to the original version of the program.
    How do I go about this?
    Thanks.
    Tyken

    Hi!
    Download it, using SE38, enter program name - Display. Then Tools - More tools - Upload/download - Download - give filename and download it.
    You can check the versions also, in SE38 - Tools - Versions.
    Regards
    Tamá

Maybe you are looking for

  • Use the same itunes library in mac book pro and win xp

    Hi, I wish to copy my itunes music, that is on my mac book pro(osx10.5.4), to an external hard drive and play it on my work pc (win xp- ituns 7).of course without loosing my original folder on the mac. can I do it? how? I tried the consolidate option

  • Sync part of address book but not all... how?

    Just started using iSync though I've been using my cell and Mac for many years (i.e. newbie at syncing though proficient with Macs). How can I sync part of my Mac's Address Book without including all 600+ contacts? It's a pain to have to scroll throu

  • Moving notes in Notation is reeeeaaally slow...

    Before I trash and reinstall GB 09, I would like to find out if anyone else has this issue. I write a lot in Score view. If I mess up on a note and try to move it, it takes several seconds for GB to do it. It's frustrating since a lot of time is spen

  • Is it possible do simultaneo​us input put and out on a PCI-6110 boar?

    We are trying to send out a signal to a transducer, which in turn sends a signal to a hydrophone. Then recieve that signal that is coming in the hydrophone? Is this possible on a PCI-6110 DAQ board? or would we need two boards, the signal is a 50kilo

  • Saving Image Files on Disk after drawing lines on the Image

    Hi guys, I am presently working on a swing project in which I need to draw lines on a image and then store the modified image in .gif, .jpg or .bmp file format. I can't seem to find an documentation dealing with this situation. Any help will be highl