No delivery expediter for PO item without material master

Hello gurus,
when I create a PO with an item without material master (just user-defined text), my system does not create a delivery expediter in ME91F, although the delivery is overdue. When I use a material master in the item, the expediter is created just fine.
Does anyone have an idea what could be wrong here?
Thanks
Alicia

Hi,
Check in ME22N, under "Delivery" Tab whether following is maintained
Reminder 1
Reminder 2
Reminder 3
If not then maintain ad if you want it to come automatically in PO then check in SPRO > MM > Purchasing > Material Master > Entry Aids for Items Without a Material Master > Here assign the Purchasing Value Key to the material group
It will start picking it for this material group for Text PO also.

Similar Messages

  • Purchasing info records for PO-items without material master

    Hi gurus,
    I would like to have the system automatically determine certain settings (e.g. reminder/urging data).
    For PO-items with material master there is no problem, because all information can be stored in the purchasing info record, and are automatically found when I enter the material number.
    For items without material number/master I tried to generate a info record for the material group. When I enter the no. of the info record, everything works fine. But the info record is not automatically found, if I only enter the material group no.
    Is there any way to make the system find the info record by itself?
    Thanks
    Alicia

    Thanks to both of you!
    Priyanka:
    How can you create a source list for a material group? I thought this was possible for materials only!?
    Of course, you cannot have more than one info record at a time for a material group. But one would be enough for me...
    Dhruba:
    Thanks for the advice, but I know how to manually select a info record. The point is, I'd like to have the system determine it according to the material group I enter.
    Any other ideas?
    Alicia

  • Entry aids for items without material master

    Hi All
    Can someone remind me....
    I want to default G/L accounts directly into the purchase order non-material master line items based upon the material group.
    I have added specific valuation types to the entry aid config table in purchasing but now cannot remember what accounting entry I need to make to link the valuation class to an expense account
    Is this in valuation and account assignment? which business key or modifier?
    Thanks for any suggestions
    Steve

    Hi,
    To link the valuation calss to G/L proceed as below.
    In OME9 the Cost centre K should have the Modifier VBR.
    In OMSK create a new Account Category Reference with description.
    In same OMSK create a new Valuation class and refer the new Account category reference.
    In OBYC against T key GBB against the suitable valuation modifier add General modifier VBR ,new Valuation Class and debit and credit the appropriate G/L.
    Now assign the valuation class to the material group in entry aids without material master.This will make the G/L adopted in PO.
    Dhruba

  • Is it possible to use IQS1 for purchase orders without material master?

    Hello,
    We are currently trying to come up with a way to send a notification on purchase orders which have GR's posted against them so that the purchasing team/requestor know that products have been shipped.  We have an office in Qatar where we would like to ship products to (which we are purchasing out of a catalog based in the US) and we need a way to track the shipment.  We are currently using T-Code IQS1 for any items which have been created as material master and are in stock within Qatar however we would like to utilize this t-code for products which are pulled in from a supplier catalog, which are not part of the material master.
    Is there a way to use IQS1 for non-material master products?
    Thanks,
    Katie

    Worked with my development team to locate the resolution.

  • Create PO without material master

    Hello guru
    When we should create PO without material , no dout materail group willbe assigned to valluation class , then accounting document is generated ,so my case is when u do the PO without material is it necessary to do GR, in this position any movement type is hitting are not iam confused plz clarify problem
    (without material creat Po means is it right na to assign mat group to val class imgmm-purchasingmaster data---entry aids for items without material master)
    here GR is possible are not plz give me clear picture on this)
    Regards
    sapman

    Hi,
    If you create a PO without material you have the option of having a GR or no GR (it also depends on the configuration of the account assignment category).
    Check the item delivery tab and you will see if you can change the flags
    You can have no ticks and so no GR would be posted and all fanance postings happen at GR.
    You could have the GR flag ticked and so all financial postings happen at GR stage.
    You couldhave the GR flag AND the GR non-valuated flag ticked and this means a GR would be required but no financial postings will take place until invoice stage.
    If a material master was involved then you you can still do the above but only if the account assignment category is NOT blank.
    Steve B

  • Split GR/IR accounts by Valuation Class (PO without material master)

    Hi Experts,
    I've an issue here, when I'm tried to do GR posting (PO without material master), system doesnt able to post GRIR account by valuation class.
    Scenario: PO issue without masterial number, enter description and with material group.
    In the configuration, I've configure "Entry aids for item without material master", assign material group "Asset" and material group "Services" into 2 different clearing account. However, when GR posting, system prompt error message and not able to do posting.
    Kindly advice.

    Yes , you can post to different GR/IR accounts based on the valuation class . In OBYC for WRX , you can choose your rules . In the Rules , select valuation class . Then the system will allow you to choose different GR/IR accounts for each valuation class .
    During the GR , the system will pick the corresponding GR/IR account based on the material grp valuation class .
    Regards,
    Hari.

  • Acct Assign of material without material master

    Dear all:
    Here's the scenario
    In IMG setting, I assigned my own accout modification (CIP) to my own account assignment category (0)
    and I made configuration in auto posting OBYC to assign GBB/CIP to G/L account for no specific valuation class.
    And when I create a PO to purchase a material without mateirla master with accout assignment category (0) and material group.
    The system only auto assign G/L account to material group which no valuation class was assigned in OME9 (Entry aids without material master in MM IMG setting)
    But I read the PA material it says "If you do not want to differentiate according to valuation classes you do not have to maintain a valuation class for a transaction."
    Yes, I don't want to differentiate according to valuation classes, but the system result is not what I expected.
    Any response might be helpful. Thanks in advance.

    Hi Utsav
    Hope you are aware of the field G/L account in Account assignment tab in PO.
    G/L account will be automatically populated here based on the Material grp you use for the PO without Material master.
    System will check the valuation class assigned to material grp ( Tcode OMQW) then the system will look for the G/l account in OBYC
    Transaction event key GBB/Genral modifier/Valuationcls/Gl acc..
    If there is an entry with Genral modifier ( from account assignment category) and valuation class ( from material grp) then the system will pick this G/L and
    populate it in PO account assignment tab.
    This G/L account will be used for further postings
    Hope it is clear
    Thanks/karthik

  • Total Delivery Cost for partial Item delivery

    Hi Guru,
    I have a requirement wherein I have to apply the total delivery cost for partial Item delivery.
    For example: Even if there is partial GR, delievery cost must be paid in full.
    Say PO is for 100 PC and delivery cost is 100 EUR. Now at MIGO if the delivered quantity is 60, the freight vendor must still be paid 100 EUR.
    Is this possible by configuration or do we need to make any changes at code level? If yes, Please guide me on how to do that....

    Create a PO without tick GR-Bsd IV, suppose I have created PO with qty 20 and rate 1 INR and give freight 50 INR (Fixed Amount)..
    Then I have done partial GR for qty 5. My freight amount booked as 12.5 INR (for partial GR)
    Then I have gone for MIRO..
    Here select Goos/Service item + Planned delivery cost.
    Enter the PO, you can see two line items appear..
    One for goods and one for freight...
    Goods will come as qty 5 and amount 5 INR and Freight will come as qty 5 and amount 12.5 INR.
    Just change the freight qty and amount as 20 and 50 INR.
    Then post the MIRO, you can see your total freight will be booked to vendor..
    Now again do GR for qty 2, at that time your freight amount will booked as 5 INR.
    Then when you will go for MIRO, you can see only the GR item, Freight qty and amount will not come at the time MIRO..
    (Note : I have told the scenario as per my previous screen shot)

  • Excise Tab in GR for PO without material master

    Hi all,
    while creating GR for PO without material master, when we tick Item OK, excise tab is appearing. SO user has to select No excise Entry from Excise header tab, which user dont want to do as its not having any excise duy. So can anyone tell me what may be the reason that this tab is coming.  As that vendor some times provide materials which is having excise duty, so we need to maintain it in Vendor Excise details in J1ID. Any solution for this?
    Regards

    As you have maintained vendor excise details in J1ID, excise tab is getting reflected in MIGO.
    Select 'No excise entry' & post GR which you are currently doing.
    Regards,
    Piyush

  • Create delivery  document for line item 5 only manually

    Hi Sap Experts,
    We have scenario, we have created sales order with 10 line items while creating delivery we don’t want to show all the 10 line item to delivery creator (creating delivery manually).
    We will send him mail saying that create delivery  document for line item 5 and we will provide him material number and delivery date and shipping point with sales order number.
    We don’t want to use partial delivery option that split the delivery and we don’t want to use VL10C tcode also.
    What are options we have and how to customize this scenario?
    Kindly suggest.
    Regards,
    Kotli

    Can you be clear in your requirement?
    One requirement is user should not select line items other than the one instructed to them
    The other requirement is delivery split should happen based on item category
    If your requirement is first one, you need to go with user exit USEREXIT_MOVE_FIELD_TO_LIPS in include MV50AFZ1 but I am not sure, on what logic, coding to be included in this exit.  If your requirement is second one, then just try in your system and share the outcome how system is functioning.  You will come to know how standard SAP works.
    G. Lakshmipathi

  • PO line item without material code

    Dear All,
    Normally  GR can be done for a PO line item if material master is maintained in order to have the valuation.
    In a case, a PO has been created without material code but short description , account assignment category and Material groups are given and GR also done.
    In material group for that line item, when checked in OMQW, valuation class not assigned.
    Account assignment category found to be F.
    How accouting document gets created and where the settings done to have GL account in Accocuting document of GR.
    Please explain.
    Regards

    Venkateshwaran Balaji Kannan wrote:
    Dear All,
    >
    > Normally  GR can be done for a PO line item if material master is maintained in order to have the valuation.
    >
    > In a case, a PO has been created without material code but short description , account assignment category and Material groups are given and GR also done.
    >
    > In material group for that line item, when checked in OMQW, valuation class not assigned.
    >
    > Account assignment category found to be F.
    >
    > How accouting document gets created and where the settings done to have GL account in Accocuting document of GR.
    >
    > Please explain.
    >
    > Regards
    Hi,
    If it is a text purchase, only value and quantity are picked up to assign these to the G/L acc you assign thru acc assigmt cat. If it is F (order) the same value will be assigned to the g/l acc pertaining to that order.
    For cccounting entry it is posted as an expense. No Val Class is required.
    Hope it helps
    Shiva

  • Delivery Schedule for Service Item

    Hi folks!
    Can anyone guide me, how to create delivery schedule for Service item in Purchase Order.
    Regards.

    If it is an external service (Item category D), you cannot enter delivery schedule for individual services.
    Lakshman

  • Inspection lot for Non stock relavant without material master

    Hi,
    Could you suggest how to carry out the isncpection processing of an Non-Stock material without Material Master?
    Our porcess is:
    1. Create a Purchse Order
    2.GR of Purchse Order.  & directly consumtion to  cost center.
    Now my doubt is that how can we maintain the QM paarmeters for Non stock material without Material Master Record.?
    Thanks,
    Amar

    Amar,
    Your requirement is not logical, If you say it is non-stock, once GR is done it would directly get consumed. QI to my knowledge not possible.
    Regards,
    Prasobh

  • On hand quantity exists or there are open delivery transactions for this item

    Hi all,
           on hand quantity exists or there are open delivery transactions for this item in oracle apps at the master item copy from & lines status in Transaction Form in Backordered.
    Thank You

    Hi,
    Make sure you completely receive the PO, then you should be good enough to convert the item to expense.
    Thanks
    -Arif.

  • Unsolved Problem-Order without Material Master

    Hi all
    My problem is still unsolved. I want to create Sales Order with out Material Master. In Materials Management, we create Purchase orders to vendors with out a Material Master by just typing  description of a material and then assigning Material Group and Cost Centre to that description.
    If it is possible to issue Purchase Orders with out material master, then it is not possible to create sales Order also without material master?
    I got an answer here yesterday to type description in Material description field in SO and use item category TATX. The problem with this is, it allows delivery, but does not allow pricing (pricing setting immediately goes to display mode in item category screen). If I do any other alterations with this item category, then it asks for material number while creating sales order.
    Please help

    Hi,
    I think the for text material pricing is not applicable.Thats why it's not taking.Text material is only for displaying text only.
    Regards,
    Hari.

Maybe you are looking for