No Demo Management Cockpits in IDES system

Dear expert,
we installed IDES system for BW/SEM. In Management Cockpit design, we can see manay installed demo measures in Measure Display. However, in Management Cockpit Display, we can't see any installed management cockpits but a blank list. Someone can tell me why there is no demo management cockpit installed?
Thanks in advance.
Jin Ming

The user is a manager so assigned the role SAP_MANAGER_MSS_NWBC_3 . The substitution actually exist and i see it on the main page as shown above but wheni click on the Substitution overview i get the error message.
I have followed the customising above and performed all steps but I still get the error.
I am using NWBC
Moderator Spotlight - Siddharth Rajora what else should i check?

Similar Messages

Is there a (supported) way of migrating regular ERP IDES system to HANA for use of Simple Finance?

We have installed a SAP ERP IDES system but we'd like to try out Simple Finance. We could do a fresh install of ERP but we like the demo data included in IDES system. Is there a simple SAP supported way of migrating our system (or data to be precise)?

No. In down sampling with iTunes a new file is created and added to the library. Most of the old data are preserved but some such as date added are created when the track is added.
Using a third party tool may achieve what you want because the new file could overwrite the old one. I recall using a third party tool to edit a mp3 and overwrite the old file. iTunes was tricked into thinking the replacement was still the original file, but of course the edits were in place. I can't make a specific application recommendation for bulk conversion where it will overwrite the old file.
I will regard this as a general iTunes question but in general if you are using beta software versions you should not be posting in the main iTunes forum.

SAPUSER is locked in ECC 6.0 IDES SYSTEM

Hi Everyone,
I installed ECC 6.0 IDES SYSTEM, but the username SAPUSER is locked, I tried with various passwords but was not successfull. Is there any other way I can logon into it with this username or any other super username. Please help.
thanks,
Prashant.

Hi techno guys,
I have deleted the usr02 from sql table, and managed to logged in by Sap* and Password pass,
But when I try to do something I am getting a sql error message that I do not have access or something like that,
From SU01 also I couldnt create a username or unlock because same error page is coming..
plz tell me do i need to do something after deleting that usr02 row from the table?
plz advice me .. thanks

Implementing UCES in SAP ISU- IDES system

Hi,
We are interested to implement UCES in SAP ISU - IDES system which we have for our internal competency and Customer POCs/Demos. ( ECC 6 with ISU)
Could any body please share their experience or knowledge on this, that would be of very helpfull.
Many Thanks
Raja

Hi,
There is something called UCES - Biller Direct where is there is an Interaction Between SAP Biller Direct and Contract Accounts Receivable and Payable.
Purpose:You should use SAP Biller Direct if you want to present information about customer accounts in your Internet portal and offer your customers the option of paying bills or of creating inquiries and complaints via the Internet.
Implementation Considerations : Your customer does not need to install any SAP software to be able to use SAP Biller Direct. All functions can be carried out using a standard Web browser.
Information on the necessary system requirements and the browsers supported by SAP Biller Direct can be found in the introductory sections of the installation guide.
SAP Biller Direct consists of an application based on JavaServer Pages. The accounting system runs on a standard application server and is used as the back end for SAP Biller Direct. The transfer of data between the front end and back end is done by RFC and is ensured using the SAP Java Connector (JCO), which you install as part of the SAP middleware.
Award points if this is found useful.

Is any document about GRC or IDES system can be located?

Hi expert,
Can you please tell me how can I access the IDES system of GRC?
Where can I locate the help document of GRC as access to the help portal of SAP?
Thanks.

Documentation on Trade Compliance (Global Trade Services) and Environmental Compliance (EH&S) is available on http://help.sap.com. The user and installation guides for GRC Access Control and Process Control are currently accessible together with the software download (requires a software license). We'll soon have that documentation on http://help.sap.com.
All compliance software is available for demonstration, some of it on IDES systems (trade compliance, environmental compliance), some on dedicated demo servers (access control, process control).

Is there an IDES system of "Access Enforcer" internally at SAP?

Hi expert,
Is there an IDES system of "Access Enforcer" in SAP so that we can access it internally from SAP network?
Thanks.

Very well.
<b>This information is only applicable within SAP's corporate network.</b>
Access Controls 5.1 - compliant user provisioning (Virsa Access Enforcer for SAP)
http://idphl930.phl.sap.corp:50000/AE/index.jsp
ERP Backend: Application Server: idphl932.phl.sap.corp, System Number: 50, system ID: G13, Client: 870
Updated Demo Scripts are located here:
Rsophltrndb\FEPublic\Public\GRC_Workshop\DemoScripts

What different IDES systems are available?

Hello.
I know that there is a ECC IDES System available. Is there also a Netweaver Portal Ides Version available? Or an ides system with Netweaver portal, ecc, bi and BW with some prepopulated data and some basic webdynpro within the portal to show ecc, bi and bw content? Is something like that available?
Thanks
Danny

Hi
Following are the different IDES systems available to-date...
For more details logon to <b>https://websmp205.sap-ag.de/ides</b> - customers & partners (OSS ID required).
New Releases available
IDES SAP ERP 2005 (SAP ECC 6.0) UNICODE
IDES SAP CRM 2005 UNICODE
IDES SAP SRM 5.0 UNICODE
IDES SAP SCM 5.0 UNICODE
IDES SAP ERP 2005 (BW 7.0/SEM 6.0) UNICODE
IDES SAP ERP 2005 (SAP ECC 6.0) for IS Retail UNICODE
IDES SAP ERP 2005 (SAP ECC 6.0) for IS Healthcare NON UNICODE
IDES SAP ERP 2005 (SAP ECC 6.0) for Campus Management
Coming Soon:
IDES SAP ERP 2005 (SAP ECC 6.0) for IS Oil UNICODE
Rgds
Reddy

Updated my K450e to Windows 10, Realtek Audio Manager icon missing from system tray

When my K450e was using Windows 8 and 8.1, there was a red Realtek AudioHD Manager icon in my system tray. Now that I've updated the K450e to Windows 10, there is no Realtek Audio Manager icon in my system tray (or control panel) anymore. I've tried installing the Realtek Audio software both from the Lenovo download site for Windows 10, and also from the Realtek site. This has not helped. On the up side, the computer's audio is working fine *smile*. Any ideas what I might try to get the Realtek AudioHD manager icon back in the system tray for Windows 10? Thanks!

Macaby there are two separate components of Boot Camp. First is Assistant which runs on the Mac side of things from OS X. It creates/deletes the Windows partition which is necessary to install Windows. Next the Boot Camp Panel software which is installed once you have successfully installed and are running Windows. It allows tweaking of the Apple hardware from within Windows. It is installed using the OS X disc and does not jeopardize your installed Windows OS in any way. This disc also contains the hardware driver necessary to optimize the hardware in Windows. In my experience this disc has never started via autorun so you will most likely have to locate the Boot Camp folder and run the setup.exe file manually.
Don't know how much your wife uses Windows but if it's running well enough then you may want to leave it alone. Check device manager in Windows for any red or yellow punctuation marks. This will indicate a potential driver issue in Windows. Also check the Windows Experience Index for performance issues. A 1 anywhere indicates a driver issue. If you have no driver issues and Windows is running well enough you may want to leave it at that.

Apply Solution Manager to existing IDES ECC 6 server

Hi There,
Can anyone teach me how to apply Solution manager to existing IDES ECC 6 server. Exactly to say, i dont know how to start this installation.
Any responses will be awarded!
Thanks a lot!
Samson

Hi,
SAP does not support any Add-On installation on IDES system, neither update, neither additional component.
Solution Manager should be installed as separate system, based on specific installation kit. You can contact your account manager in order to obtain it. SolMan if free of fee product.
Kind regards,
Sam

IDES system copy ..error during IMPORT_ABAP..unable to create indexes

Hi all,
I am doing a IDES system copy. I ran the report SMIGR_CREATE_DLL , the export activities have been completed successfully as well on the source system. Now on the target system, during the import, I am getting the following error in the log file SAPDFACT.log.
(DB) ERROR: DDL statement failed
(CREATE INDEX "/BI0/E0RSTT_C06~P" ON "/BI0/E0RSTT_C06" ( "KEY_0RSTT_C06P" , "KEY_0RSTT_C06T" , "KEY_0RSTT_C06U" , "KEY_0RSTT_C061" , "KEY_0RSTT_C062" , "KEY_0RSTT_C063" , "KEY_0RSTT_C064" , "KEY_0RSTT_C065" , "KEY_0RSTT_C066" , "KEY_0RSTT_C067" , "KEY_0RSTT_C068" ) TABLESPACE PSAPSR3 STORAGE (INITIAL 65536 NEXT 0000002560K MINEXTENTS 0000000001 MAXEXTENTS 2147483645 PCTINCREASE 0 ) NOLOGGING COMPUTE STATISTICS )
DbSlExecute: rc = 99
(SQL error 1408)
error message returned by DbSl:
ORA-01408: such column list already indexed
(DB) INFO: disconnected from DB
The owner for this table is SAPSR3. Some oracle forums suggested to drop the index before recreating it. But when i do "drop index SAPSR3."/BI0/E0RSTT_C06~P..it says.."the specified index does not exist". But when I go to recreate this index, it doesn get created successfully. After that when I re-run the import, it again fails. Suprisingly..now if i go to check if this index is present thru a sql querry:
select owner, object_name, object_type from dba_objects where object_name='SAPSR3."/BI0/E0RSTT_C06~P"', it tells "no rows selected". This is happening everytime, I create an index, where it gets created successfully, and the import again fails with the same error in SAPDFACT.log.
I found an SAP note 885441 named..common errors during migration..although mine isnt a migration..my both source and destination are Red hat 64 bit platform.
The note 1st asks to download the latest R3load..which I did and extracted in the kernel directory of the source..then it also asked to edit the .TSK file..in my case..SAPDFACT.TSK..where the lines:
I /BIC/E<Cubename>~<index> C err
to I /BIC/E<Cubename>~<index> C ign..
I did that..this time..the import again fails..but in the SAPDFACT.log..it complains about some other index..n the same gets generated in the .TSK file as well..the earlier index error is not again generated.
I am not sure..what is going wrong..my export went through successfully.i have done the prep steps for export as well..before that i ran the SMIGR_CREATE_DLL report as well..
Any inputs are highly appreciated..
Thanks,
Akshay

Hi,
Check SAP Note 1166589 - Table converter: DB error when creating secondary indexes
Thanks
Sunny

Unable to login to IDES system after client copy

Hi guys
the IDES system which i was using was working fine. I was trying CLient copy today morning and was trying to create a new client in the IDES system.
The client copy failed due to a shortdump in the process.
Now i am unable to login to the client 800 as it says the user password is incorrect.
How do i get back my 800 client? is there a way to get back the client 800 or do i have any other optionn to re-set the password without logging on to the client?
i do have access to client 000.
please guide me what should i do? i need the client 800 back and should be able to login too.

hi,
i cannot login to client 800. I need to login first in the client 800 to go to su01 to re-set the password.
I want to login to client 800 which i am unable to do as a result of client copy. So the other option i am looking at is reset the password from client 000.
anyways thanks for your inputs
Hi guys,
any idea?
Edited by: Workflow learner on Jun 2, 2008 10:48 AM

TIME_OUT in VK13 / VK33 on IDES system

We are receiving the following timeout when running VK13 and VK33 on our IDES system. This is standard code, and there is no notes regarding this TIME_OUT.
The Termination occurred in the ABAP program "SAPLV12A" - i
"ACCESS_REPORT_GENERATE".
The main program was "SAPMV13A ".
The whole ST22 dump is as follows:
Runtime Errors         TIME_OUT
Date and Time          18.08.2010 19:35:25
     Short text
          Time limit exceeded.
     What happened?
          Error analysis
          If you have access to SAP Notes, carry out a search with the following
          keywords:
          "TIME_OUT" " "
          "SAPLV12A" or "LV12AU07"
          "ACCESS_REPORT_GENERATE"
     System environment
          SAP-Release 700
          Application server... "sap6ides"
          Network address...... "10.3.3.125"
          Operating system..... "Windows NT"
          Release.............. "5.2"
          Hardware type........ "2x AMD64 Level"
          Character length.... 16 Bits
          Pointer length....... 64 Bits
          Work process number.. 3
          Shortdump setting.... "full"
          Database server... "sapC10ides"
          Database type..... "ADABAS D"
          Database name..... "C10"
          Database user ID.. "SAPC10"
          Char.set.... "C"
          SAP kernel....... 700
          created (date)... "May 22 2007 00:12:17"
          create on........ "NT 5.2 3790 Service Pack 1 x86 MS VC++ 14.00"
          Database version. "SQLDBC 7.6.0.035 CL 139084 "
          Patch level. 111
          Patch text.. " "
          Database............. "MaxDB 7.6, MaxDB 7.7"
          SAP database version. 700
          Operating system..... "Windows NT 5.0, Windows NT 5.1, Windows NT 5.2, Windows
           NT 6.0"
          Memory consumption
          Roll.... 16192
          EM...... 16759360
          Heap.... 0
          Page.... 2342912
          MM Used. 4880016
          MM Free. 3496816
     User and Transaction
          Client.............. 800
          User................ "MEASLE"
          Language key........ "E"
          Transaction......... "VK13 "
          Program............. "SAPLV12A"
          Screen.............. "SAPMV13A 0100"
          Screen line......... 24
     Information on where terminated
          Termination occurred in the ABAP program "SAPLV12A" - in
           "ACCESS_REPORT_GENERATE".
          The main program was "SAPMV13A ".
          In the source code you have the termination point in line 177
          of the (Include) program "LV12AU07".
     Source Code Extract
     Line     SourceCde
       147                   dff_desc_ref_field = dd08v_tab-reffldname
       148                 EXCEPTIONS
       149                   OTHERS             = 1.
       150               IF sy-subrc NE 0.
       151                 CLEAR: dd08v_tab-txttabname,
       152                        dd08v_tab-reffldname,
       153                        dd08v_tab-txtfldname.
       154               ENDIF.
       155     * und aufnehmen
       156               READ TABLE dd08v_tab WITH KEY tabname = dd08v_tab-tabname
       157                                             fieldname = dd08v_tab-fieldname
       158                                             TRANSPORTING NO FIELDS.
       159               IF sy-subrc EQ 0.
       160                 MODIFY dd08v_tab INDEX sy-tabix
       161                        TRANSPORTING txttabname reffldname txtfldname
       162                                     arbgb msgnr.
       163               ELSE.
       164                 APPEND dd08v_tab.
       165               ENDIF.
       166               LOOP AT dd05m_tab WHERE
       167                 tabname = t681-kotab AND fieldname = xt681e_tab-sefeld.
       168
       169                 READ TABLE dd03v_tab INDEX dd05m_tab-primpos.
       170                 IF sy-subrc = 0 AND dd03v_tab-datatype NE 'CLNT'.
       171                   MOVE-CORRESPONDING dd05m_tab TO dd05v_sel.
       172                   dd05v_sel-forfldname = dd03v_tab-fieldname.
       173                   IF dd08v_tab-reffldname IS INITIAL.
       174                     dd05v_sel-reffldname = dd03v_tab-fieldname.
       175                   ELSE.
       176                     TABLES dd05p.
     >>>>>                     SELECT * FROM dd05p
       178                     WHERE tabname = dd08v_tab-txttabname
       179                      AND   fieldname = dd08v_tab-reffldname
       180                      AND   checktable = dd08v_tab-checktable
       181                      AND   checkfield = dd03v_tab-fieldname.
       182                       dd05v_sel-reffldname = dd05p-forkey.
       183                       EXIT.
       184                     ENDSELECT.
       185                     IF sy-subrc = 4.
       186                       dd05v_sel-reffldname = dd08v_tab-reffldname.
       187                     ENDIF.
       188                   ENDIF.
       189                   APPEND dd05v_sel.
       190                 ENDIF.
       191               ENDLOOP.
       192             ENDIF.
       193             IF NOT dd08v_tab-txttabname IS INITIAL AND
       194                NOT dd08v_tab-txtfldname IS INITIAL.
       195     * Fremdtabelle lesen (Text)
       196               CALL FUNCTION 'RV_TABLE_READ'
                       2
             0
             0
             0

>           Database version. "SQLDBC 7.6.0.035 CL 139084 "
You seem to use a VERY OLD MaxDB database software.
I suggest:
- Update your MaxDB to a recent release, the version you use is very old.
- Update your database statistics to make sure the access paths for the data is optimal
- check the database parameters against Note 814704 - MaxDB Version 7.6 parameter settings for OLTP/BW
If you still use the default settings that came with the installation then it's rather obvious why your system is so slow.
Markus

SSO in IDES System

Hi,
Is it possible to configure SSO (single signon) between IDES system to SAP EP system.
Thanku

I can't find a reason why not. did you tried it?
Regards
Juan

Configure Web Services in a SAP-IDES-System?

Hello,
I have access to a SAP-frontend on a SAP-IDES-System and now Iu2019d like to configure two Web Services in SAP. I think I can do this configuration with SPRO, but I donu2019t really know how and where.
Is there a good documentation about Web Services in SAP IDES?
Thanks a lot!

Hi,
Have a look at below link.
http://help.sap.com/SAPHELP_NWPI71/helpdata/EN/57/07813ee3d32b44e10000000a114084/content.htm
I sure it will help you out
Rgds
Radhakrishna D S

Regarding access key for modify predifined fm in SAP IDES System

hai to all,
How can i find
access key for modify predifined fm in SAP IDES System
i have sap 4.7 dump(IDES)
please give reply asap.
thanks in advance,
regards,
surya.

Hi Chandran,
Thank you for the reply,
how can i access this site, its asking username password,
i didn't have both of these and even i'm unable to register also.
how can i access.
please respond
regards,
surya.

No Demo Management Cockpits in IDES system

Similar Messages

Maybe you are looking for